Solution Preparation

is a solution preparation system that automatically calculates and dispenses the exact amount of solvent required to prepare a precise concentration based on the approximate mass of solute added by the operator.

The demand for greater accuracy from analytical instruments has prompted

the automating of sample preparation based on the much more accurate solvent

weight-to-sample weight basis.

accomplishes this by automatically preparing samples for liquid chromatography, gas chromatography, spectroscopy, viscosity,

NMR and other analyses.

1Sample solutions can be routinely prepared on a weight-to-weight, Normal, Molal or Molar basis to an accuracy of 0.02%, two parts in 10,000).

Features and benefits

2Time is saved because only the approximate amount of the sample needs to be added to the sample. The computer compensates by adding the exact amount of solvent.

Features and benefits

3Typical solution preparation time is less than 2 minutes. If your lab analyzes 50-100 samples per day the labor savings can rapidly recover the cost of investment.

Features and benefits

4Up to eight different solvents can be dispensed with zero cross contamination.

Features and benefits

5Ordinary, disposable sample bottles can be used to prepare the solution directly. The expense and labor of using volumetric glassware is eliminated. Eliminates cleaning and breakageof expensive volumetric glassware.

Features and benefits

6Eliminates operator-to-operator variability.

Features and benefits

7Provides ISO and GLP documentation.

Features and benefits

8Decreases exposure solvents.

Features and benefits

Samples solutions can be easily prepared with mixtures of solvents. This eliminates the labor and waste associated with premixing solvents.

9

Features and benefits

10A self-adhesive label(s)for the prepared solutionis automatically printedfor each sample. A permanent file of each sample and its preparation is stored for later recall.

Features and benefits

11Virtually anysolvent can be used.

Features and benefits

1. Operator signs in and selects/edit the method.

The

Process

3. Select the sample to prepare

The

Process

2. Enter the mixture data.

4. The completed sample is removed and the printed sample label is affixed to the bottle.

The

Process

You can edit the caption fields to be printed on the label.

The Pump Test option allows you to test the pump speed.

Specifications

• Typical solution accuracy +/- 0.02% (on 50 ml of a 1% solution) • Number of methods stored 100 • Number of solvent pumps From one to eight • Pump type Pulseless, self-priming, magnetically coupled, gear pumps. No rotating seals. • Wetted materials of construction Teflon©, 316 stainless steel, graphite • Solvent delivery rate 100 ml/min • Electronic balances used A&D, Mettler, Sartorius or Denver Instruments • Minimum computer required PC with Microsoft Windows, one COM Port, two USB ports • Electrical 110-240 Volts @ 50-60 Hz, 100 Watts. • Physical 27 cm (10.75”) wide X 42 cm (16.5”) long X 9.2 cm (3.625”) high, 5.45 Kg (12 lbs) • Connections USB, RS-232., RJ-12

THANK YOU