soluzioni fotovoltaiche a film sottile … brochure amorfo_ita.pdf · ciascun modulo fotovoltaico...
TRANSCRIPT
SOLUZIONIFOTOVOLTAICHEA FILM SOTTILE
PHOTOVOLTAIC SOLUTION THIN FILM
ENERGIA – GUADAGNO – INTEGRAZIONE ARCHITETTONICAENERGY – GAIN – ARCHITECTURAL INTEGRATION
2
ENERGIA – GUADAGNO – INTEGRAZIONE ARCHITETTONICA ENERGY – GAIN – ARCHITECTURAL INTEGRATION
Grazie all’af� dabilità del marchio UNI-SOLAR® conosciuto da oltre 20 anni nel settore, i moduli Sunerg UNI-SOLAR® sono facilmente � nanziabili dagli istituti di credito, aprendo nuove prospettive di investimento a tutti coloro che desiderano produrre energia pulita tramite l’impiego di sistemi fotovoltaici.I prodotti fotovoltaici a � lm sottile Sunerg Solar con tecnologia UNI-SOLAR ® sono costituiti da particolari celle solari in silicio amorfo (spessore 1 m), incapsulate in un polimero stabilizzato ai raggi ultravioletti.Ciascun modulo fotovoltaico utilizza le esclusive celle solari a tripla giunzioni con silicio a � lm sottile, in cui la componente blu, verde e rossa dello spettro della luce solare è assorbita dai differenti strati presenti. Questa capacità di frazionamento è la chiave di una maggiore produttività, specialmente ai livelli più bassi di insolazione e in condizioni di luce diffusa.
Chi è Sunerg
Sunerg Solar, azienda italiana leader nella produzione e distribuzione di impianti solari termici e fotovoltaici, è il partner ideale per tutti coloro che desiderano entrare nell’ottica del risparmio energetico. Sunerg è lieta di proporre la propria linea di produzione di sistemi fotovoltaici con moduli in silicio amorfo tripla giunzione, ottimi per l’integrazione architettonica anche su grandi edi� ci.
I prodotti Uni-Solar
Made in Italy dal 1978
Sistema di gestione certi� catoISO 9001 e ISO 14001
3 www.sunergsolar.com
The reliability of the UNI-SOLAR ® brand known for over 20 years in the � eld, Sunerg UNI-SOLAR ® modules are easily � nanced by credit institutions, opening new investment opportunities to all those who wish to produce clean energy through the use of photovoltaic systems.Sunerg Solar thin � lm photovoltaic products with UNI-SOLAR ® technology are made up of special solar cells in amorphous silicon (thickness 1 m), encapsulated in a stabilized polymer against ultraviolet rays.Each PV module uses the exclusive triple-junction solar cell with thin-� lm silicon, in which the component blue, green and red spectrum of sunlight is absorbed by different layers present. This ability to split is the key to greater productivity, especially at lower levels of solar radiation and diffuse light.
Who is Sunerg Solar
SUNERG SOLAR is a leading Italian company manufacturing and distributing solar thermal and photovoltaic systems, ideal partner for people involved in energy saving. Sunerg Solar is pleased to offer its range of photovoltaic systems with triple-junction amorphous silicon modules, great for building integration on large buildings.
Uni-Solar products
Made in Italy since 1978
Certi� ed system of managementISO 9001 and ISO 14001
4
Test di rendimento
Test di rendimento in tutto il mondo hanno constatato la superiore capacità di produzione elettrica dei moduli UNI-SOLAR® nei confronti dei moduli cristallini o di altre nuove tecnologie. La presenza di un diodo di bypass connesso ad ogni singola cella permette ai moduli di produrre elettricità anche quando sono sporchi o parzialmente ombreggiati.La caratteristica principale dei moduli UNI-SOLAR® è la maggiore produzione di energia reale per kWp con potenza che varia dal 5% al 25% in più rispetto al cristallino. I moduli sono resistenti alle intemperie, pedonabili (assenza di vetro),con elevate caratteristiche dirobustezza pur essendo leggeri (3,5 kg/m2) , con una eccezionale resa e durata nel tempo. Questa tecnologia garantisce una minore perdita di ef� cienza in presenza di elevate temperature.
Applicazioni Sunerg
Test performance
Test performance all over the world have veri� ed the superior capacity of electrical output of UNI-SOLAR ® modules compared to crystalline modules or new other technologies.Bypass diodes connected to each cell allow modules to produce electricity even if partially shadowy or dirty.UNI-SOLAR ® best characteristic is greater production in electric power per kWp with power range from 5% to 25% compared to crystalline.The modules are resistant to the elements, can be stepped on, no glass, very light (3.5 kg/m2), and in the same time unbreakable; with an exceptional performance and durability. This technology provides a lower loss of ef� ciency at high temperatures.
Sunerg Applications
Sunerg Solar realizza il prodotto � nito utilizzando il sistema a � lm sottile UNI-SOLAR ® attraverso incollaggiosu diversi supporti metallici.E’ possibile sostituire e/o af� ancare i moduli così realizzati sugli elementi strutturali esistenti: tetti di capannoni industriali, facciate, grandi vetrate, volte, pensiline, tettoie, falde dei casolari, serre per le coltivazioni, nessuno escluso!
Sunerg Solar manufactures the � nished product using the system in thin-� lm UNI-SOLAR ® through bonding on various metal surfaces.It is possible to replace and / or lay down module on the existing structural elements: industrial buildings roofs, facades, large windows, vaults, car shelter, roo� ng, farm roo� ng, greenhouses for crops, no exceptions!
ENERGIA – GUADAGNO – INTEGRAZIONE ARCHITETTONICA ENERGY – GAIN – ARCHITECTURAL INTEGRATION
Competitor A - Crystalline Silicon
Competitor B - Crystalline Silicon
Thin Film Amorphous SiliconUNI-SOLAR ®
Produzione annuale di elettricità delle diverse tecnologie - Bolzano, Italia
Ann
ual P
rodu
ctio
n in
kW
h/kW
p
Authorized by Bolzano Province Saving Energy Department
Goretti - Lecco - 8,64 kWp Struttura completa a terra - Ground System Kit
5 www.sunergsolar.com
Amorfo: l’evoluzione del fotovoltaico in 4 soluzioni
Plate
Roof
PC
Amorphous : photovoltaic evolution in 4 solutions
Integral PlateSistema Integral Plate - struttura piatta � essibile con pro� lo a “S”Integral Plate System – � at , � exible plate with “S” shaped joint pro� le
Sistema Plate - struttura piatta � essibilePlate System – � at, � exible plate
Sistema Roof - struttura grecataRoof System – corrugated metal sheet
Sistema Pc - struttura coibentataPc System – sandwich metal sheet
Brevetto SUNERGSOLARpatent
6
Integral Plate
FIRST SOLUTION WITH HIGHEST OUTPUT IN kWp PER m2
Integral-Plate is an industrial system, Sunerg Solar patent, planned for photovoltaic system, roo� ng and green houses. This solution is intended for architectural integration building considering different advantages either economic as for installation and esthetics. Integral-Plate is an anodized aluminum with an “S” shape joint pro� le housing UNI-SOLAR ® panels optimally. This patent is granting time saving and safe installation.
LA PRIMA SOLUZIONE CON LA PIU’ ALTA RESA IN kWp PER MQ
Integral-Plate è un sistema industriale, brevettato da Sunerg Solar, per la realizzazione di impianti fotovoltaici su coperture, sovracoperture e serre. Una soluzione che, a seconda della tipologia di installazione, permette la realizzazione di impianti che si integrano completamente nell’architettura dell’edi� cio con signi� cativi vantaggi strutturali, estetici, di montaggio ed economici. Integral-Plate è costituito da un pro� lo in alluminio anodizzato a forma di “S” che permette di af� ancare i moduli UNI-SOLAR ® in maniera ottimale.Questo brevetto garantisce nello speci� co un notevole risparmio di tempo di installazione ed estrema sicurezza nel montaggio.
Sifar Placcati Srl - Città di Castello (PG) - 465,00 kWp
ENERGIA – GUADAGNO – INTEGRAZIONE ARCHITETTONICA ENERGY – GAIN – ARCHITECTURAL INTEGRATION
7 www.sunergsolar.com
Prometeo Energy Srl (Rsm) - 99,00 kWp - Rimini
ADVANTAGES
Integral Plate is a � xing system, a Sunerg Solar Patent, including many advantages beyond UNISOLAR ® feature technology:
Higher FiT• More power on same surface • Ideal for stand alone system• Best solution for curved roo� ng ( vault and doom)• Easy installation• New design• Stepping on• Snow load resistant• Flexible system: suitable for many architectural solution, facades, green houses • and acustic insulation panels20 years warranty on Sunerg Solar glueing: thanks to “S” joint pro� le protection•
VANTAGGI
Integral-Plate è un sistema di � ssaggio, brevettato da Sunerg Solar che racchiude molteplici vantaggi in aggiunta alle peculiarità proprie della tecnologia UNISOLAR ®:
Tariffe incentivanti più alte• Più potenza sulla stessa super� cie• Ideale per impianti stand alone• Miglior soluzioni per coperture curve (volte e cupolini)• Facile da installare• Design innovativo• Calpestabile• Resistente ai carichi di neve• Sistema versatile: adattabile a diverse soluzioni architettoniche, a facciata, serre e pannelli • fonoassorbentiGaranzia 20 anni su incollaggio Sunerg Solar: grazie alla protezione data dal pro� lo ad “S”•
Facile da installare - Alta ef� cienza - Massima VersatilitàEasy to install – High Ef� ciency – Maximun versatility
Brevetto SUNERGSOLARpatent
8
Integral Plate
Intervento Pronto 24h (RN) - 12,92 kWp - Stadio Villa Verucchio (RN)
Zago Renzo Srl (TV) - 151,67 kWp - San Vendemiano (TV)
Greentech Impianti Srl (BO) - 34,82 kWp - San Giovanni in Persiceto (BO)
Il sistema Integral Plate è stato studiato da Sunerg Solar per permette di realizzare una copertura sulla copertura, adeguandosi a qualsiasi tipo di struttura architettonica grazie alla sua totale versatilità.Il � ssaggio meccanico del pro� lo ad “S”, con rivetto a tenuta completo di guarnizione, è coperto dal modulo stesso garantendo una perfetta protezione alle in� ltrazioni d’acqua.
Integral-Plate System is a Sunerg Solar idea allowing to set a roo� ng on the roof, matching to any architectonic structure thanks to its � exibility. The “S” joint pro� le is � xed by a sealing rivet with a gasket, covered by same module granting a perfect waterproof.
ENERGIA – GUADAGNO – INTEGRAZIONE ARCHITETTONICA ENERGY – GAIN – ARCHITECTURAL INTEGRATION
9 www.sunergsolar.com
Eco-Roof srl (PN) - 77,44 kWp - Ponte di Pieve (TV)
Caratteristiche tecniche - Technical features
MODELLO WP DIMENSIONI PESO (kg/m2) mq/kWcTYPE WP (mm) WEIGHT (kg/m2) m2/kWp
PVL68T-PLATE-I 68+/- 5% 2900x396x4,8 9,84 16,18
PVL128T-PLATE-I 128+/- 5% 5550x396x4,8 9,84 16,26
PVL136T-PLATE-I 136+/- 5% 5550x396x4,8 9,84 15,30
PVL144T- PLATE-I 144+/- 5% 5550x396x4,8 9,84 14,40
Misure Interasse Sistema Integral Plate - Plate System Axle base size
394396
375
Anthea Srl (Lu) - 80,00 kWp - Porcari (Lu)
Brevetto SUNERGSOLARpatent
10
Plate
Plate system is an ideal solution to realize photovoltaic system on � at roo� ng or doomed with a waterproof mantle membrane, it can be anchored to ballast or to omega thanks to side wing � ap or directly glued to membrane roo� ng with professional bonding agent. Module is made up by � exible UNISOLAR ® laminate glued on Sunerg Solar � at galvanized aluminum sheet (aluzink) with a thickness of mm8/10. Plate solution is suitable to different kind of roof with a highly corrosion resistance.
Il sistema PLATE è la soluzione ideale per realizzare impianti fotovoltaici su coperture piane o a volta con manto impermeabile in membrana, può essere ancorato alle zavorre o agli omega grazie alle alette laterali oppure incollato direttamente alla copertura in guaina con un adesivo professionale. Il modulo è costituito da laminati � essibili UNI-SOLAR ® incollati da Sunerg Solar su una lamiera piatta rivestita di alluminio zincato (aluzink) con uno spessore di mm 8/10. La soluzione Plate è adattabile a differenti tipi di tetto ed è altamente resistente alla corrosione.
Caratteristiche tecnicheTechnical features
394
440
MODELLO WP DIMENSIONI PESO (kg/m2) mq/kWcTYPE WP (mm) WEIGHT (kg/m2) m2/kWp
PVL68T-PLATE 68+/- 5% 3000x440x4,8 9,84 19,40
PVL128T- PLATE 128+/- 5% 5600x440x4,8 9,84 19,25
PVL136T- PLATE 136+/- 5% 5600x440x4,8 9,84 15,30
PVL144T-PLATE 144+/- 5% 5600x440x4,8 9,84 17,11
EXTRA P Extra lunghezza - Extra length
Misure Interasse Sistema Plate - Plate system Axle base size
Pagliocchini S. Maria in Valle di Trevi (PG)
ENERGIA – GUADAGNO – INTEGRAZIONE ARCHITETTONICA ENERGY – GAIN – ARCHITECTURAL INTEGRATION
11 www.sunergsolar.com
Roof
By Roof system it is possible to create special photovoltaic roo� ng and allowing total integration architecture. It consists of � exible UNI-SOLAR ® laminates. Sunerg glues it on a sheet of corrugated galvanized aluminum (ALUZINK) with a thickness of mm 8/10 with highly corrosive resistance.
Il sistema ROOF permette di realizzare particolari sovracoperture e coperture fotovoltaiche consentendo un’integrazione architettonica totale. E’ costituito da laminati � essibili UNI-SOLAR® incollati da Sunerg Solar su una lamiera grecata rivestita in alluminio zincato (aluzink) con spessore mm 8/10 ad alta resistenza corrosiva.
Caratteristiche tecnicheTechnical features
394 39440
500 5001000
MODELLO WP DIMENSIONI PESO (kg/m2) mq/kWcTYPE WP (mm) WEIGHT (kg/m2) m2/kWp
PVL68T-RF2 136+/– 5% 3000x1000x40 10,61 22,05
PVL128T-RF2 256+/– 5% 6000x1000x40 10,61 21,88
PVL136T-RF2 272+/– 5% 6000x1000x40 10,61 20,59
PVL144T- RF2 288+/– 5% 6000x1000x40 10,61 19,44
EXTRA R Extra lunghezza - Extra length
Misure Interasse Sistema Roof - Roof system Axle base size
Lastre su misura max 11 mt - Maximum length customized 11 mt
Accessori: semicolmi - Accessories: semi ridge cap
Edilcoper Srl (MI) - Sigma Impianti Ciriè (TO) - 12,784 kWp
12
PC
PC system is ideal for new roofs or asbetos /Eternit replacements, providing a perfect thermic insulation.It consists of � exible UNISOLAR laminates: Sunerg glues it on a corrugated metal sheet made of two metal parts: Aluzink on top ( thickness 8/10mm) and below a prepainted galvanized steel (White-Grey) or aluminum (thickness 5/10mm) with polyurethane insulating foam, which allows a perfect thermal insulation. It is also available in a version for zootechnic insulation structures for agricultural and zootechnical usages.
Il sistema PC, ideale per nuove coperture e sostituzione coperture amianto, garantisce un perfetto isolamento termico. Esso è costituito da laminati � essibili UNI-SOLAR ® incollati da Sunerg Solar su un pannello coibentato grecato composta da due parti metalliche: il lato esterno è in aluzink di spessore mm 8/10 mentre il lato interno è in acciaio zincato preverniciato (bianco-grigio) o alluminio di spessore mm 5/10, con interposto coibente in schiuma poliuretanica.Il modulo PC, disponibile in versione agro coibentata (modello AG con lato interno in vetroresina), è la soluzione migliore per le strutture agricole e gli allevamenti zootecnici.
Caratteristiche tecnicheTechnical features
Sp
394394
500 500
1000
MODELLO WP DIMENSIONE PESO (kg/m2) mq/kWcTYPE WP (mm) WEIGHT (kg/m2) m2/kWp
PVL68T-PC2 136+/– 5% 3000x1000x40 16,12 22,058
PVL128T-PC2 256+/– 5% 6000x1000x40 16,12 21,88
PVL136T-PC2 272+/- 5% 6000x1000x40 16,12 20,59
PVL144T-PC2 288+/- 5% 6000x1000x40 16,12 19,44
PVL136+68T-PC2 408+/- 5% 9000x1000x40 16,12 21,07
PVL68T-AG2 136+/- 5% 3000x1000x40 16,12 22,058
PVL128T- AG2 256+/- 5% 6000x1000x40 16,12 21,88
PVL136T- AG2 272+/- 5% 6000x1000x40 16,12 20,59
PVL144T- AG2 288+/- 5% 6000x1000x40 16,12 19,44
Misure Interasse Sistema PC - Plate system Axle base size
Lastre su misura max 11 mt - Maximum length customized 11 mt
Spessore standard coibente mm 40 - Standard thickness insulation mm 40
Su richiesta per quantità superiori a 500 mq spessore coibente max 100 mm
On request above 500 m2 thickness insulation maximum to 100 mm
Lunano (Pu) - 100,00 kWp
ENERGIA – GUADAGNO – INTEGRAZIONE ARCHITETTONICA ENERGY – GAIN – ARCHITECTURAL INTEGRATION
LAMINATO PVL-144
LAMINATE PVL-144
SPECIFICHE ELETTRICHE
ELECTRICAL SPECIFICATION
STC: (1000 W/m2, AM 1.5,
25°C temperatura)
Potenza di picco Wp: 144
Peak Power Wp: 144
Tensione alla massima potenza
Vmp (V): 33,0
Voltage al Pmax Vmp (V): 33,0
Corrente alla massima potenza
Imp (A): 4,36
Current at Pmax Imp (A): 4,36
Corrente a circuito chiuso (Isc): 5,3 A
Short circuit current (Isc): 5,3 A
Tensione a circuito aperto
Voc (V): 46,2
Oper circuit voltage Voc (V): 46,2
Serie massima fusibili: 8 A
Max series fuse rating: 8 A
COEFFICIENTI DI TEMPERATURA
TEMPERATURE COEFFICIENT
Coef� ciente Isc: 0,10%/°C
Coef� ciente Voc: -0,38%/°C
Coef� ciente Pmax: –0,21%/°C
Coef� ciente Imp: 0,10%/°C
Coef� ciente Vmp: –0,31%/°C
SPECIFICHE GEOMETRICHE
TECHNICAL DRAWING
Lunghezza/Length: 5.486 mm
Larghezza/Width: 394 mm
Spessore/Thickness: 4 mm
Peso/Weight: 7,7 kg
TOLLERANZE
TOLLERANCES
Lunghezza/Length: ± 5 mm
Larghezza/Width: ± 3 mm
LAMINATO PVL-136
LAMINATE PVL-136
SPECIFICHE ELETTRICHE
ELECTRICAL SPECIFICATION
STC: (1000 W/m2, AM 1.5,
25°C temperatura)
Potenza di picco Wp: 136
Peak Power Wp: 136
Tensione alla massima potenza
Vmp (V): 33,0
Voltage al Pmax Vmp (V): 33,0
Corrente alla massima potenza
Imp (A): 4,13
Current at Pmax Imp (A): 4,13
Corrente a circuito chiuso (Isc): 5,1 A
Short circuit current (Isc): 5,1 A
Tensione a circuito aperto
Voc (V): 46,2
Oper circuit voltage Voc (V): 46,2
Serie massima fusibili: 8 A
Max series fuse rating: 8 A
COEFFICIENTI DI TEMPERATURA
TEMPERATURE COEFFICIENT
Coef� ciente Isc: 0,10%/°C
Coef� ciente Voc: -0,38%/°C
Coef� ciente Pmax: –0,21%/°C
Coef� ciente Imp: 0,10%/°C
Coef� ciente Vmp: –0,31%/°C
SPECIFICHE GEOMETRICHE
TECHNICAL DRAWING
Lunghezza/Length: 5.486 mm
Larghezza/Width: 394 mm
Spessore/Thickness: 4 mm
Peso/Weight: 7,7 kg
TOLLERANZE
TOLLERANCES
Lunghezza/Length: ± 5 mm
Larghezza/Width: ± 3 mm
LAMINATO PVL-128
LAMINATE PVL-128
SPECIFICHE ELETTRICHE
ELECTRICAL SPECIFICATION
STC: (1000 W/m2, AM 1.5,
25°C temperatura)
Potenza di picco Wp: 128
Peak Power Wp: 128
Tensione alla massima potenza
Vmp (V): 33,0
Voltage al Pmax Vmp (V): 33,0
Corrente alla massima potenza
Imp (A): 3,88
Current at Pmax Imp (A): 3,88
Corrente a circuito chiuso (Isc): 4,8 A
Short circuit current (Isc): 4,8 A
Tensione a circuito aperto
Voc (V): 47,6
Oper circuit voltage Voc (V): 47,6
Serie massima fusibili: 8 A
Max series fuse rating: 8 A
COEFFICIENTI DI TEMPERATURA
TEMPERATURE COEFFICIENT
Coef� ciente Isc: 0,10%/°C
Coef� ciente Voc: -0,38%/°C
Coef� ciente Pmax: –0,21%/°C
Coef� ciente Imp: 0,10%/°C
Coef� ciente Vmp: –0,31%/°C
SPECIFICHE GEOMETRICHE
TECHNICAL DRAWING
Lunghezza/Length: 5.486 mm
Larghezza/Width: 394 mm
Spessore/Thickness: 4 mm
Peso/Weight: 7.7 kg
TOLLERANZE
TOLLERANCES
Lunghezza/Length: ± 5 mm
Larghezza/Width: ± 3 mm
LAMINATO PVL-68
LAMINATE PVL-68
SPECIFICHE ELETTRICHE
ELECTRICAL SPECIFICATION
STC: (1000 W/m2, AM 1.5,
25°C temperatura)
Potenza di picco Wp: 68
Peak Power Wp: 68
Tensione alla massima potenza
Vmp (V): 16,5
Voltage al Pmax Vmp (V): 16,5
Corrente alla massima potenza
Imp (A): 4,13
Current at Pmax Imp (A): 4,13
Corrente a circuito chiuso (Isc): 5,1 A
Short circuit current (Isc): 5,1 A
Tensione a circuito aperto
Voc (V): 23,1
Oper circuit voltage Voc (V): 23,1
Serie massima fusibili: 8 A
Max series fuse rating: 8 A
COEFFICIENTI DI TEMPERATURA
TEMPERATURE COEFFICIENT
Coef� ciente Isc: 0,10%/°C
Coef� ciente Voc: -0,38%/°C
Coef� ciente Pmax: –0,21%/°C
Coef� ciente Imp: 0,10%/°C
Coef� ciente Vmp: –0,31%/°C
SPECIFICHE GEOMETRICHE
TECHNICAL DRAWING
Lunghezza/Length: 2.849 mm
Larghezza/Width: 394 mm
Spessore/Thickness: 4 mm
Peso/Weight: 3.9 kg
TOLLERANZE
TOLLERANCES
Lunghezza/Length: ± 5 mm
Larghezza/Width: ± 3 mm
Descrizione tecnica dei laminati - Laminate technical description
13 www.sunergsolar.com
14
La tecnologia UNI-SOLAR®, affermata nel mercato da oltre 20 anni, è confermata da test universitari e da aziende specialistiche, oltre che dai copiosi impianti installati nel tempo. Da ciò ne derivano diversi vantaggi:
Alta produzione di energia• grazie ai coef� cienti di temperatura molto bassi e all’elevata ef� cienza anche a basse irradiazioni (cielo nuvoloso)Stabilità delle prestazioni nel tempo• Assenza di vetro• (questo previene il veri� carsi di fenomeni di corrosione all’interno del modulo)Resistenza agli agenti atmosferici:• i laminatiUNI-SOLAR ® sono resistenti a vento e grandine• Moduli autopulenti:• grazie alla bassa resistenza all’attrito della super� cie strutturata che riduce al minimo l’accumulo di impurità e sporcoLa trama del modulo e il trattamento• antiri� esso aumenta l’assorbimento di luceLeggerezza:• peso speci� co dei moduli 3,6 kg/mq, con pro� lo circa 10 kg/mqSuper� cie frontale realizzata in • ETFE - Tefzel ® (materiale con elevata trasmittanza ottica che premette un assorbimento ottimale della luce solare)Produzione a basso impatto ambientale:• i laminati UNI-SOLAR® sono prodotti in condizioni di ef� cienza energetica a basse temperatureSicurezza:• il bloccaggio meccanico del modulo consente una maggior protezione contro gli atti di vandalismo e di furto rispetto ai moduli tradizionaliAlta � nanziabilità da parte degli istituti di credito• Garanzia di potenza minima nominale suddivisa in 3 • fasce: primi 10 anni 92%; primi 20 anni 84% e per 25 anni dalla data di vendita 80%
Sun energy advantages
UNI-SOLAR ® technology, established in the market since 20 years, is con� rmed by testing university and companies specialists, as well as by many plants installed meanwhile. From this we have many output bene� ts:
High energy• due to very low temperature coef� cient and high ef� ciency even at low radiation (cloudy sky) Stability of performance all along • No glass• (this prevents the occurrence of corrosion inside the module) Resistance to the atmospheric agents• : UNI-SOLAR ® laminates are resistant to wind and hail Modules are self-cleaning• : thanks to the low frictional resistance of the textured surface that minimizes the accumulation of impurities and dirt Module texture and the • anti-re� ective coating increases light absorption Lightweight• : speci� c weight of 3.6 kg modules/sqm, with a pro� le about 10 kg/m Front surface made of • ETFE - Tefzel ® (high optical transmittance fabric granting best sunlight absorption) Production of low environmental impact: UNI-SOLAR ® • laminates are produced according to low temperatures of energy ef� ciency Safety• : module mechanical lock allows excellent protection against vandalism and stealing compared to traditional installed modulesHighly bankable • Minimum power rating is guaranteed into three • ranges: 92% in the � rst 10 years; 84% for the � rst 20 years and 80% for 25 years from the date of sale
Vantaggi a tutta energia solare
Soluzioni Energetiche Srl (VR) - 239,90 kWp - Zimella (VR)
ENERGIA – GUADAGNO – INTEGRAZIONE ARCHITETTONICA ENERGY – GAIN – ARCHITECTURAL INTEGRATION
General Impianti Srl - Quarto d’Altino (VE) - 17,068 kWp
Blu Gea srl (VT) - 117, 50 kWp - Viterbo
WinnerMind Group srl (PG) - 50,00 kWp - S. Giustino (PG)
Essepi Ingegneria srl (CN) - 258,12 kWp - Genola (CN)
Elettro Impiantistica srl ( FG) - 182,78 kWp - Apricena (FG)
Clima Center srl (BA) - 19,86 kWp - Gioia del Colle (BA)
Anthea srl (LU) - 15,30 kWp - Lucca
Borea Due (GE) / Costa Crociere - 121,00 kWp - Savona
I grandi impianti � rmati Sunerg Solar - Sunerg Solar biggest plants
Le speci� che indicate si basano sulle informazioni disponibili al momento della stampa e possono essere modi� cate senza preavviso. Sunerg Solar non garantisce che le informazioni menzionate siano prive di errori.
Speci� cations are based on the information available at the time of printing and are subject to change without notice. Sunerg Solar does not grant that all speci� cations mentioned will be error-free.
SUNERG Solar s.r.l.Via Donnini, 51 - Loc. Cinquemiglia06012 - Citta’ di Castello (PG) - Italy
Tel: +39 075.8540018 - Fax: +39 075 8648105www.sunergsolar.com - [email protected]
Cod
. 002
AM
-IT-
EN
ver
. 11.
2