source one

14
Introducti http:// www.sourceone.me

Upload: gaurav-gupta

Post on 11-Apr-2017

55 views

Category:

Engineering


3 download

TRANSCRIPT

Page 1: Source one

Introductionhttp://www.sourceone.me

Page 2: Source one

Outline• About us• Products - Industrial Rubber Hoses - Hydraulic Hoses - Stainless Steel Corrugated

hoses- End Fittings – SS Hoses/ Camlock Couplings- End Fittings – Rubber/ Hydraulic Hoses

• Selection Criteria - Hoses• Installation of Hoses• Services• Contact Us

Page 3: Source one

About Us• SourceOne is a market-leading hose solutions

provider for it’s customers, delivering quality products on time.

• SourceOne is led by experts in Fluid Transfer solutions with several years of industry experience.

• Our manufacturing partners provide unique design and manufacturing engineering capabilities to optimize customer value.

• With wide operating pressure ranges, optimal levels of abrasion resistance, long-lasting durability and high-performance transfer capabilities, SoureOne hoses and hose fittings provide the ultimate fluid conveyance solutions for a variety of equipments and applications around the world.

Page 4: Source one

Products…

Page 5: Source one

Industrial Rubber HosesTypes and Applications

• Air/ Water Hose• Pneumatic Tool

Hose• Rock Drill Hose• Concrete Transfer

Hose• Steam Hose• Wash Down Hose• Super Spray

Hose• Petrol Dispensing

Hose• CNG Hose

• Chemical Hose• Sandblast Hose• Carbon Free Hose• Water Suction and

Discharge• Oil Suction and

Discharge• Brewery and food

hose• Welding/ Gas

Cutting hose• LPG Hose

Page 6: Source one

Hydraulic HosesWe supply hydraulic hose that meets SAE

domestic and DIN international standards. Our high-pressure hydraulic hose brands feature three-layer construction to ensure strength, flexibility, and proper pressure maintenance. Braided Hydraulic Hoses

Types• Wire braided hose

SAE100 R1 • Wire braided hose

SAE100 R2 • One fibre braided hose

SAE100 R6• Two fibre braided hose

SAE100 R3• One fibre braided hose

SAE100 R5

Spiral Hydraulic Hoses Types• Spiral Wire hose 4SH• Spiral Wire hose 4SP• Spiral Wire hose SAE

100 R12• Spiral Wire hose SAE

100 R4• Spiral Wire Hose SAE

100 R15

Page 7: Source one

Stainless Steel Corrugated Hoses

• Metallic Flexible Hoses & Hose Assemblies

• AISI 321, 316L, 304 grades• Oxygen and Water lancing Hose

Assemblies • Hose Size Range from 6mm to 300mm

NB & Braiding types of 24, 36, 48 ,64, & 96 carriers

• Our Hose Assemblies, conform to BS6501 Part-1 and ISO 10380 standard.

• Assemblies made by TIG welding of Stainless steel / Carbon steel end connections.

Page 8: Source one

End Fittings – SS Hoses

Page 9: Source one

End Fittings – Camlock Couplings

Type A Type C Type D

Type E Type F Type DC Type DP

Type B

• Available in Stainless Steel – SS304/ SS 316, Brass and Aluminium

• Available is sizes: ½”, ¾”. 1”, 1.1/4”,1.1/2”,2”, 2.1/2”,3”,4”,5”,6” & 8”

Page 10: Source one

End Fittings – Rubber/ Hydraulic Hoses

Page 11: Source one

Selection Criteria - Hoses

Use STAMPEDS – SizeT- TemperatureA – ApplicationM – Material to be conveyedP – PressureE – Ends or CouplingsD – Delivery (Volume & Velocity)

Page 12: Source one

Installation of HosesFlexible hoses can be classified into two broad categories, viz., Rubber

hoses and Metallic hoses. The selection of the hoses is made depending upon the service conditions (pressure, temperature and other environmental conditions)

• Under pressure, a hose may change in length. Always provide some slack in the hose to allow for this shrinkage or expansion. (However, excessive slack in hose lines is one of the most common causes of poor appearance).

• If a hose is installed with a twist in it, high operating pressures tend to force it straight. This can loosen the fitting nut or even burst the hose at the point of strain.

• At bends, provide enough hose for a wide radius curve. Too tight a bend pinches the hose and restricts the flow. The line could even kink and close entirely. In many cases, use of the right fittings or adapters can eliminate bends or kinks.

• In applications where there is considerable vibration or flexing, allow additional hose length. The metal hose fittings, of course, are not flexible and proper installation protects metal parts from undue stress, and avoids kinks in the hose.

• When 90 deg. adapters are used, the assembly becomes neater looking and easier to inspect and maintain. It uses less hose, too.

• Hose assemblies in service should be inspected frequently for leakage, kinking, corrosion, abrasion or any other signs of wear or damage. Hose assemblies that are worn or damaged should be removed from service and replaced immediately.

Page 13: Source one

ServicesWe offer the following services to our customers;

Supply of top quality hoses and/or end fittings from our reputed manufacturing partners.

• Quality Control and delivery adherence of your nominated or regular vendors.

• Negotiate prices to the best possible. Meet the client’s targets.

• Constant monitoring of the manufacturing of products, their quality and delivery status.

• We can support customer visits to a set of Indian Vendors based on requirements.

• Offer savings in the logistics, shipping costs to clients. 

Page 14: Source one

Contact us TODAY!Contact Person: Gaurav GuptaMobile: +91 9818312069/ +91 9810335069E-mail: [email protected]: http://www.sourceone.me

Address:120 Munirka Vihar,New Delhi – 110067INDIA.