sparc m10-series servers fujitsu inc., sparc m10 systems installation guide, part number...

Download SPARC M10-Series Servers Fujitsu Inc., SPARC M10 Systems Installation Guide, Part Number C120-E678EN,

Post on 14-Oct-2020

0 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • FUJITSU CONFIDENTIAL

    SPARC M10-Series Servers

    Installation

    Copyright 2013 FUJITSU LIMITED

  • FUJITSU CONFIDENTIAL

    Objectives

    Copyright 2013 FUJITSU LIMITED

    ■ Perform an initial configuration of the service processor

    ■ Manage user accounts

    ■ View the platform environment and hardware configurations

    ■ Document the characteristics of a Physical Partition

    ■ Manage Capacity on Demand (CoD)

    ■ Allocate Building Blocks to a Physical Partition and power it on

    ■ Access the OpenBoot Prom (OBP) and boot the operating system

    ■ Run hardware tests to verify the system

    2

  • FUJITSU CONFIDENTIAL

    Additional Resources

    ■ Fujitsu Inc., SPARC M10 Systems Installation Guide, Part Number C120-E678EN, December 2012

    ■ http://eis/checklists/checklists.html

    3 Copyright 2013 FUJITSU LIMITED

    Press PLAY (4) to Continue

    http://eis/checklists/checklists.html

  • FUJITSU CONFIDENTIAL

    Installation Tools

    ■ Phillips screwdriver (#2)

    ■ T15 Hexlobe Torx screwdriver

    ■ Stepladder

    ■ ESD mat and antistatic wrist strap

    ■ Lifter (hydraulic or mechanical jack)

    ■ System management terminal

    4 Copyright 2013 FUJITSU LIMITED

  • FUJITSU CONFIDENTIAL

    Installation Procedures

    ■ Set XSCF user account and password

    ■ Configure the XSCF

    ■ Configure Physical Partitions

    ■ Add the CPU core activation key

    ■ Set the operating mode for the physical partition

    ■ Start the physical partition

    ■ Boot Oracle Solaris

    ■ Run hardware validation tests

    5 Copyright 2013 FUJITSU LIMITED

  • FUJITSU CONFIDENTIAL

    Extended System Controller Facility (XSCF) Functions

     The main functions provided by the XSCF or service processor are:

     Security management

    Remote server access

    Configuration management

     Platform monitoring

     Server status reporting

     Error detection

    Capacity on Demand (CoD)

    Resource management

    6 Copyright 2013 FUJITSU LIMITED

  • FUJITSU CONFIDENTIAL

    SPARC M10-1 XSCF Serial Cable

    Connect the serial cable supplied with the server from the serial port of the XSCF unit (A in the figure) to the system management terminal.

    7 Copyright 2013 FUJITSU LIMITED

  • FUJITSU CONFIDENTIAL

    SPARC M10-1 XSCF LAN Cables

    Connect LAN cables of Category 5 or more from the LAN port of the XSCF unit (B in the figure) to the network switch or hub.

    8 Copyright 2013 FUJITSU LIMITED

  • FUJITSU CONFIDENTIAL

    SPARC M10-4/M10-4S Serial Cable

    Connect the serial cable supplied with the cabinet from the serial port of the XSCF unit (A in the figure) to the system management terminal.

    9 Copyright 2013 FUJITSU LIMITED

  • FUJITSU CONFIDENTIAL

    SPARC M10-4/M10-4S XSCF LAN Cables

    Connect the LAN cables of Category 5 or more from the LAN port of the XSCF unit (B in the figure) to the network switch or hub.

    10 Copyright 2013 FUJITSU LIMITED

  • FUJITSU CONFIDENTIAL

    Initial XSCF Login

    11 Copyright 2013 FUJITSU LIMITED

    login: default

    Change the panel mode switch to Locked and press return… Omitted

    Leave it in that position for at least 5 seconds.

    Change the panel mode switch to Service and press return… Omitted

    XSCF>

  • FUJITSU CONFIDENTIAL

    Create a new user account

    ■ adduser

    ■ password

    ■ setprivileges

    12 Copyright 2013 FUJITSU LIMITED

    Click here to view a video demonstration of the adduser process or press PLAY to continue.

  • FUJITSU CONFIDENTIAL

    XSCF command line navigation tips

    Command line editing

    13 Copyright 2013 FUJITSU LIMITED

    Click here to view a video demonstration of navigation or press PLAY to continue.

  • FUJITSU CONFIDENTIAL

    Verify hardware configuration

    ■ showhardconf

    ■ showstatus

    14 Copyright 2013 FUJITSU LIMITED

    Click here to view a video demonstration of showhardconf & showstatus or press PLAY to continue.

  • FUJITSU CONFIDENTIAL

    View XSCF log messages

    showlogs command:

    15 Copyright 2013 FUJITSU LIMITED

    ■ Error log

    ■ Power log

    ■ Event log

    ■ Monitoring log

    ■ Temperature history

    ■ Console message log

    ■ Panic message log

    ■ IPL message log

    Click here to view a video demonstration of showlogs or press PLAY to continue.

  • FUJITSU CONFIDENTIAL

    Configure autologout

     setautologout

     showautologout

    16 Copyright 2013 FUJITSU LIMITED

    Click here to view a video demonstration of setautologout & showautologout or press PLAY to continue.

  • FUJITSU CONFIDENTIAL

    Configure Networking for a single BB

    ■ Verify existing network routes

    XSCF> showroute -a

    XSCF> setroute -c del -n 0.0.0.0 -g xscf#0-lan#0

    ■ Verify the SSCP network

    XSCF> showsscp

    XSCF> setsscp

    ■ Configure Admin network 0:

    XSCF> setnetwork bb#00-lan#0 -m 255.255.255.0 192.168.10.11

    XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.10.1 bb#00-lan#0

    ■ Configure Admin network 1, optional recommended for redundancy:

    XSCF> setnetwork bb#00-lan#1 -m 255.255.255.0 192.168.11.11

    XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.11.1 bb#00-lan#1

    ■ Set XSCF hostname and domain name:

    XSCF> sethostname bb#00 scf0-hostname

    XSCF> sethostname -d company.com

    XSCF> applynetwork

    17 Copyright 2013 FUJITSU LIMITED

    Press PLAY (4) to Continue

  • FUJITSU CONFIDENTIAL

    Configure Networking for a single BB

    18 Copyright 2013 FUJITSU LIMITED

    Click here to view a video demonstration of setnetwork or press PLAY to continue.

    Click here to view a video demonstration of sethostname or press PLAY to continue.

  • FUJITSU CONFIDENTIAL

    Configure Networking for 2 to 4 BBs with no Crossbar box

     Configure Admin network 0:

    XSCF> setnetwork bb#00-lan#0 -m 255.255.255.0 192.168.10.11

    XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.10.1 bb#00-lan#0

    XSCF> setnetwork bb#01-lan#0 -m 255.255.255.0 192.168.10.12

    XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.10.1 bb#01-lan#0

    XSCF> setnetwork lan#0 -m 255.255.255.0 192.168.10.10

     Configure Admin network 1, optional recommended for redundancy:

    XSCF> setnetwork bb#00-lan#1 -m 255.255.255.0 192.168.11.11

    XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.11.1 bb#00-lan#1

    XSCF> setnetwork bb#01-lan#1 -m 255.255.255.0 192.168.11.12

    XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.11.1 bb#01-lan#1

    XSCF> setnetwork lan#1 -m 255.255.255.0 192.168.11.10

     Set hostnames and domain name:

    XSCF> sethostname bb#00 scf0-hostname

    XSCF> sethostname bb#01 scf1-hostname

    XSCF> sethostname -d company.com

    XSCF> applynetwork

    19 Copyright 2013 FUJITSU LIMITED

    Press PLAY (4) to Continue

  • FUJITSU CONFIDENTIAL

    Configure Networking for 5 to 16 BBs with Crossbar boxes

     Configure Admin network 0:

    XSCF> setnetwork xbbox#80-lan#0 -m 255.255.255.0 192.168.10.11

    XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.10.1 xbbox#80-lan#0

    XSCF> setnetwork xbbox#81-lan#0 -m 255.255.255.0 192.168.10.12

    XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.10.1 xbbox#81-lan#0

    XSCF> setnetwork lan#0 -m 255.255.255.0 192.168.10.10

     Configure Admin network 1, optional recommended for redundancy:

    XSCF> setnetwork xbbox#80-lan#1 -m 255.255.255.0 192.168.11.11

    XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.11.1 xbbox#80-lan#1

    XSCF> setnetwork xbbox#81-lan#1 -m 255.255.255.0 192.168.11.12

    XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.11.1 xbbox#81-lan#1

    XSCF> setnetwork lan#1 -m 255.255.255.0 192.168.11.10

     Set hostnames and domain name:

    XSCF> sethostname xbbox#80 scf0-hostname

    XSCF> sethostname xbbox#81 scf1-hostname

    XSCF> sethostname -d company.com

    XSCF> applynetwork

    20 Copyright 2013 FUJITSU LIMITED

    Press PLAY (4) to Continue

  • FUJITSU CONFIDENTIAL

    Configure XSCF time zone and date

     List of time zones.

    XSCF> settimezone -c settz -a

     Set the time zone.

    XSCF> settimezone -c settz -s US/Mountain

     Set the date.

    XSCF> setdate -s MMDDhhmmyyyy.ss

    Reboot the XSCF.

    XSCF> rebootxscf -a –y

    21 Copyright 2013 FUJITSU LIMITED

    Click here to view a video demonstration of rebootxscf or press PLAY to continue.

View more >