spec sheet - amazon s3€¦ · spec sheet model: ry-832 • duct size dimensions: 30.00” x...
TRANSCRIPT
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-412 / Royal GrilleSpec Sheet
9.5000
1.75
00
MODEL: RY-412• Duct Size Dimensions: 10.00” x 2.25”• Outside Dimensions: 12.00” x 3.50”• Design Dimensions: 9.63” x 1.81”• Free Air: 76%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
9.63”
12.00”
1.81” 3.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-414 / Royal GrilleSpec Sheet
1.75
00
11.5000
MODEL: RY-414• Duct Size Dimensions: 12.00” x 2.25”• Outside Dimensions: 14.00” x 3.50”• Design Dimensions: 11.63” x 1.81”• Free Air: 76%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
11.63”
14.00”
1.81” 3.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-416 / Royal GrilleSpec Sheet
13.5000
MODEL: RY-416• Duct Size Dimensions: 14.00” x 2.25”• Outside Dimensions: 16.00” x 3.50”• Design Dimensions: 13.63” x 1.81”• Free Air: 76%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
13.63”
16.00”
1.81” 3.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-610 / Royal GrilleSpec Sheet
MODEL: RY-610• Duct Size Dimensions: 8.00” x 4.00”• Outside Dimensions: 10.00” x 5.50”• Design Dimensions: 7.62” x 3.62”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
7.5000
3.31
25
7.62”
10.00”
3.62” 5.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-612 / Royal GrilleSpec Sheet
MODEL: RY-612• Duct Size Dimensions: 10.00” x 4.00”• Outside Dimensions: 12.00” x 5.50”• Design Dimensions: 9.63” x 3.62”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
9.5000
3.31
25
9.63”
12.00”
3.62” 5.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-614 / Royal GrilleSpec Sheet
MODEL: RY-614• Duct Size Dimensions: 12.00” x 4.00”• Outside Dimensions: 14.00” x 5.50”• Design Dimensions: 11.63” x 3.62”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
3.31
25
12.7500
11.63”
14.00”
3.62” 5.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-616 / Royal GrilleSpec Sheet
MODEL: RY-616• Duct Size Dimensions: 14.00” x 4.00”• Outside Dimensions: 16.00” x 5.50”• Design Dimensions: 13.63” x 3.62”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
13.5000
13.63”
16.00”
3.62” 5.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-808 / Royal GrilleSpec Sheet
MODEL: RY-808• Duct Size Dimensions: 6.00” x 6.00”• Outside Dimensions: 8.00” x 8.00”• Design Dimensions: 5.63” x 5.62”• Free Air: 66%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
5.5000
5.50
005.63”
8.00”
5.62” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-812 / Royal GrilleSpec Sheet
MODEL: RY-812• Duct Size Dimensions: 10.00” x 6.00”• Outside Dimensions: 12.00” x 8.00”• Design Dimensions: 9.63” x 5.63”• Free Air: 66%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
9.5000
5.50
00
9.63”
12.00”
5.63” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-814 / Royal GrilleSpec Sheet
MODEL: RY-814• Duct Size Dimensions: 12.00” x 6.00”• Outside Dimensions: 14.00” x 8.00”• Design Dimensions: 11.63” x 5.63”• Free Air: 66%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
5.50
00
11.5000
11.63”
14.00”
5.63” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-816 / Royal GrilleSpec Sheet
MODEL: RY-816• Duct Size Dimensions: 14.00” x 6.00”• Outside Dimensions: 16.00” x 8.00”• Design Dimensions: 13.63” x 5.62”• Free Air: 66%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
13.5000
13.63”
16.00”
5.62” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-824 / Royal GrilleSpec Sheet
MODEL: RY-824• Duct Size Dimensions: 22.00” x 6.00”• Outside Dimensions: 24.00” x 8.00”• Design Dimensions: 21.45” x 5.62”• Free Air: 66%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
21.5000
5.50
00
21.45”
24.00”
5.62” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-826 / Royal GrilleSpec Sheet
MODEL: RY-826• Duct Size Dimensions: 24.00” x 6.00”• Outside Dimensions: 26.00” x 8.00”• Design Dimensions: 23.63” x 5.62”• Free Air: 66%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
23.5000
23.63”
26.00”
5.62” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-832 / Royal GrilleSpec Sheet
MODEL: RY-832• Duct Size Dimensions: 30.00” x 6.00”• Outside Dimensions: 32.00” x 8.00”• Design Dimensions: 29.63” x 5.62”• Free Air: 66%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
29.5000
5.50
00
29.63”
32.00”
5.62” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-1010 / Royal GrilleSpec Sheet
MODEL: RY-1010• Duct Size Dimensions: 8.00” x 8.00”• Outside Dimensions: 10.00” x 10.00”• Design Dimensions: 7.63” x 7.63”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
7.5000
7.63”
10.00”
7.63” 10.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-1012 / Royal GrilleSpec Sheet
MODEL: RY-1012• Duct Size Dimensions: 10.00” x 8.00”• Outside Dimensions: 12.00” x 10.00”• Design Dimensions: 9.63” x 7.63”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
9.5000
7.37
50
9.63”
12.00”
7.63” 10.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-1014 / Royal GrilleSpec Sheet
MODEL: RY-1014• Duct Size Dimensions: 12.00” x 8.00”• Outside Dimensions: 14.00” x 10.00”• Design Dimensions: 11.63” x 7.63”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
11.5000
7.37
50
11.63”
14.00”
7.63” 10.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-1016 / Royal GrilleSpec Sheet
MODEL: RY-1016• Duct Size Dimensions: 14.00” x 8.00”• Outside Dimensions: 16.00” x 10.00”• Design Dimensions: 13.63” x 7.63”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
13.5000
7.37
50
13.63”
16.00”
7.63” 10.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-1212 / Royal GrilleSpec Sheet
MODEL: RY-1212• Duct Size Dimensions: 10.00” x 10.00”• Outside Dimensions: 12.00” x 12.00”• Design Dimensions: 9.63” x 9.63”• Free Air: 62%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
9.5000
9.25
00
9.63”
12.00”
9.63” 12.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-1214 / Royal GrilleSpec Sheet
MODEL: RY-1214• Duct Size Dimensions: 12.00” x 10.00”• Outside Dimensions: 14.00” x 12.00”• Design Dimensions: 11.56” x 9.62”• Free Air: 62%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
11.5000
9.25
0011.56”
14.00”
9.62” 12.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-1216 / Royal GrilleSpec Sheet
MODEL: RY-1216• Duct Size Dimensions: 14.00” x 10.00”• Outside Dimensions: 16.00” x 12.00”• Design Dimensions: 13.63” x 9.62”• Free Air: 62%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
13.500016.0000
12.000
09.25
00
13.63”
16.00”
9.62” 12.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-1414 / Royal GrilleSpec Sheet
MODEL: RY-1414• Duct Size Dimensions: 12.00” x 12.00”• Outside Dimensions: 14.50” x 14.50”• Design Dimensions: 11.62” x 11.63”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
11.5000
11.437
5
11.62”
14.50”
11.63” 14.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-1416 / Royal GrilleSpec Sheet
MODEL: RY-1416• Duct Size Dimensions: 14.00” x 12.00”• Outside Dimensions: 16.50” x 14.50”• Design Dimensions: 13.62” x 11.63”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
13.5000
11.437
513.62”
16.50”
11.63” 14.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-1426 / Royal GrilleSpec Sheet
MODEL: RY-1426• Duct Size Dimensions: 24.00” x 12.00”• Outside Dimensions: 26.50” x 14.50”• Design Dimensions: 23.50” x 11.63”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
23.5000
23.50”
26.50”
11.63” 14.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-1616 / Royal GrilleSpec Sheet
MODEL: RY-1616• Duct Size Dimensions: 14.00” x 14.00”• Outside Dimensions: 16.50” x 16.50”• Design Dimensions: 13.63” x 13.63”• Free Air: 68%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
13.5000
13.312
5
13.63”
16.50”
13.63” 16.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-1620 / Royal GrilleSpec Sheet
MODEL: RY-1620• Duct Size Dimensions: 18.00” x 14.00”• Outside Dimensions: 20.50” x 16.63”• Design Dimensions: 17.63” x 13.63”• Free Air: 68%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
17.5000
13.312
5
17.63”
20.50”
13.63” 16.63”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-2020 / Royal GrilleSpec Sheet
MODEL: RY-2020• Duct Size Dimensions: 18.00” x 18.00”• Outside Dimensions: 20.50” x 20.50”• Design Dimensions: 17.63” x 17.49”• Free Air: 58%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
17.5000
17.062
5
17.63”
20.50”
17.49” 20.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-2032 / Royal GrilleSpec Sheet
MODEL: RY-2032• Duct Size Dimensions: 30.00” x 18.00”• Outside Dimensions: 32.50” x 20.50”• Design Dimensions: 29.63” x 17.63”• Free Air: 58%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
29.0000
17.375
0
29.63”
32.50”
17.63” 20.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-2222 / Royal GrilleSpec Sheet
MODEL: RY-2222• Duct Size Dimensions: 20.00” x 20.00”• Outside Dimensions: 22.50” x 22.50”• Design Dimensions: 19.23” x 19.23”• Free Air: 56%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
19.0000
18.937
5
19.23”
22.50”
19.23” 22.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-2626 / Royal GrilleSpec Sheet
MODEL: RY-2626• Duct Size Dimensions: 24.00” x 24.00”• Outside Dimensions: 26.50” x 26.50”• Design Dimensions: 23.28” x 23.63”• Free Air: 61%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
23.5000
23.28”
26.45”
23.63” 26.45”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
RY-3232 / Royal GrilleSpec Sheet
MODEL: RY-3232• Duct Size Dimensions: 29.63” x 29.63”• Outside Dimensions: 32.00” x 32.00”• Design Dimensions: 28.63” x 28.63”• Free Air: 51%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
29.2500
29.250
0
28.63”
32.00”
28.63” 32.00”