specialists in communications for the elevator ... - merakmaildocs.merak.es/02a-merak-catalogo...

MERak - 1

CATALOGUE 2019-2020

Specialists in communications for the elevator industry

MERak: Safety first MERak R&D MERak devices and EN 81-28 standard

EMERGENCY TELEPHONES MEP2L Land Line Emergency Phone MMK-656 Emergency Compact Telephone MMK-656CE Emergency Compact Telephone Flush Mounted MEP-GW & AUDIO Digital Emergency Telephone & Audio Module

GSM GATEWAYS MEP-737 GSM/M2M Gateway for Lifts / Intercom SystemMEP-736F GSM/M2M Gateway for Lifts MEP-736N GSM/M2M Gateway for Lifts

SOFTWARE Lift Monitor Merak Cloud Platform KITS MMk-996 Kit for Lifts with Compact Emergency Telephone MMk-956 Component Box Kit for Lifts MMk-902 Enlightened Alarm Pushbutton For Under the Cabin ACCESSORIES Audio Modules Handsets Filters Batteries Cables Chargers and Power supply

GENERAL INFORMATION MERak Products Warranty Contact and Social Networks

Index ofContents

345

67911

13

1415-19

2123

2526

28293031

323338394244

464748

MERak - 2

MERak - 3

MERak is a company specialized in emergency communications with strong presence in the elevator industry. It was founded in 1996 starting with two complementary line products: emergency devices and operating software.

Nowadays the company has proven a solvent trajectory designing, producing and commercializing telecommunication devices that fulfill the European standard EN 81-28, which is essential in order to guaranty secure communication in lifts.

Since 2005, MERak has its own R&D department responsible for boosting the development of its own projects and upgrading the commercialized range of products and services.

And also has developed the concept of online elevator through the incorporation of M2M technology into its devices.

MERak: Safety first

MERak - 4

MERak’s electronic and telecommunications engineering department (R&D) has specialized in developing solutions that fulfills the international legislation and the needs of its clients, in an ongoing process of technological improvement.

The mastery of telecommunication and IT, fields evolving continually, has allowed MERak to produce innovative and completely adapted products to the needs of the vertical transport industry. Such as: web platforms for programming and test systems for remote emergency devices.

The accumulated experience in this field allows MERak to apply the monitoring systems technology to new activities and devices.

MERak R&D

MERak - 5

CABIN INFORMATIONMERak emergency communication devices (compact telephone, audio modules) feature bright yellow and green LEDs to indicate the status of an emergency call through different patterns of selectable blinkings (EN 81-28).

ALARM FILTERINGThe European standard EN 81-28 states that the emergency telephone should be capable, in the event that the control system detects that the car is not capable of trapping persons (for instance, at ground level with the doors open), the car alarm should be disabled so as to avoid false alarms due to vandalism. For this case, the emergency telephone MMk-656 has an input at the pair of terminals J1 FILTR and J1 FILTR. When this input is short-circuited, generation of alarms from the car is disabled.

BATTERY CONTROLThe MMk-656 telephone manages the battery charge and performs measurement of the remaining charge in it. The device can generate automatic calls to the elevator maintenance company in case that the battery charge level is below a programmable tension threshold (as required by EN 81-28) or if no battery is detected.

MERak devices and EN 81-28 standardALARMS GENERATIONEN 81-28 stipulates that elevators must have an alarm system that allows two-way communication between trapped users in the elevator and rescue service. With MERak devices for elevators, users and operators can make emergency calls in case of entrapment to different telephone pre-programmed numbers depending on which button is pushed, the cabin alarm button or the maintenance alarm button (SOS).

END OF ALARMEN 81-28 also requires that when an alarm occurs, the emergency telephone must remain in a special state ("waiting for the end of alarm") until trapped people have been rescued and installation maintainer through an authorized person confirms to the emergency telephone the finalization of the alarm situation. Once the alarm is ended, the telephone must go back to idle state and end the alarm in the reception call center through one of the following methods, 1). Through the maintenance alarm button of connected to the telephone, 2) through a command using the handset or external call, or 3) through an end of alarm button connected to an audio module.

PERIODIC TEST CALLThe European standard EN 81-28 demands that the set should make a status verification call at least every three days. To this end, the MMk-656 has been provided with two memory registers (06 and 07), where the numbers of the servers which log the test calls can be stored.

MERak - 6

All that you need tocomply with the EN 81-28in one device

Emergency Telephones

MERak - 7

◦ Protocol P100

◦ Wide range of power supply: from 10 V to 30 V DC.

◦ Built-in lithium battery

◦ Built-in keyboard

◦ Great audio quality

◦ One language in the cabin and a second neutral setup language.

◦ Indicator LEDs of alarm progress, according to EN 81-28

◦ Entirely digital integrated system improves audio, reliability and speech synthesis quality

BENEFITS

FEATURES

Compact emergency phone for lifts, includes battery inside, keyboard, digital design and works with any public land telephone line in the world.

◦ Designed to work with any public fixed telephone line in the world.

◦ Integrates keyboard in its upper part to facilitate the programming.

◦ Integrated battery to maintain the phone active in case of power outage.

◦ Suport Protocol P100 for programming all test call

◦ Works under 10 to 30V DC voltage and maintains the mechanical format of MMK-656, its predecessor.

LAND LINE EMERGENCY PHONE

MEP-2L

EN 81-28 l EN 81-70

MERak - 8

TECHNICAL DETAILS

Voltage: 10-30 Vdc

Consumption in standby: 70 mA at 12 Vdc

Active power consumption: 300 mA max. a 12 Vdc

Battery Charge: 1 A

Dimensions (height x width x depth): 142 x 76 x 22 mm.

Weight: 190 gr.

MEASURES (MM)

Complies with the EN 81-28 and EN 81-70.

5 Memory slots available to program emergency calls.

Periodic test calls with customizable period (1, 2 or 3 days).

Internal alarm calls (rescue operators).

Two security passwords: PAC (Programming Access Code) that allows to program and check certain parameters and RAC (Remote-Maintenance Access Code) that allows you to program advanced parameters.

3 Programming modes: Remote programming through calling the Device from any telephone with DTMF dialing, local programming with integrates keyboard and factory by demand.

Voice Synthesizer.

Languages: English and Spanish (Available to introduce new languages on demand).

Tracking through electronic serial number.

Built filters for electrical noise control.

Status and multicolor status LEDs according to the EN81-28 standard.

SPECIFICATIONS

MERak - 9


◦ Integrated two step intelligent charger for lead battery.

◦ Built-in Floor Synthesizer.

◦ Multilingual: up to two languages in the cabin and a third technical setup language.

◦ Indicator LEDs of alarm progress.

◦ End of Alarm pushbutton and Alarm Filter.

◦ Intercom analog output.

BENEFITS

FEATURES

Emergency compact telephone easy to configure, with advanced audio features, and with capacity to remote lift maintenance.

◦ Save costs due to its integrated, compact design.

◦ Install telephones quickly: voice assisted configuration or autoconfiguration with SD card.

◦ Anticipate breakdowns accessing remotly the lift controller.

◦ Obtain the greatest versatility on the market in power supply, connection and updates.

◦ Guarantee users high quality communications with optimised audio.

EMERGENCY COMPACT TELEPHONE

MMK-656

EN 81-28

MERak - 10

TECHNICAL DETAILS

Voltage: 10-30 Vdc

Consumption in stand by: 70 mA a 12 Vdc


Battery Charge: 1 A


Weight: 190 gr.

MEASURES (MM)



Periodic test calls with customizable period up to 3 days.


Intercom with machine room.


Connect up to 4 lift cabins sharing the same telephone line without any extra wiring.

3 Programming modes: Remote programming through calling the Device from any telephone with DTMF dialing, local programming through intercom (Handset MMk-616) and programming through preprogrammed micro SD memory card.

Voice Synthesizer.

Floor Announcer (Connectivity with lift controller through RS-485 port).

Languages: English, Spanish, French, Italian, German, Portuguese, Catalan, (Available to introduce new languages).

Programmable Automatic Battery Control.

Toughness against overvoltage.




SPECIFICATIONS

MERak - 11

Emergency compact telephone easy to configure, with advanced audio Features, and with capacity to remote lift maintenance. Flush mounted on stainless steel faceplate with anti-vandalism protection.

◦ Save costs due to its integrated, compact design.

◦ Install telephones quickly: voice assisted configuration or autoconfiguration with SD card.

◦ Anticipate breakdowns accessing remotly the lift controller.

◦ Obtain the greatest versatility on the market in power supply, connection and updates.

◦ Guarantee users high quality communications with optimised audio.


◦ Integrated two step intelligent charger for lead battery.

◦ Built-in Floor Synthesizer.

◦ Multilingual: up to two languages in the cabin and a third technical setup language.

◦ Indicator LEDs of alarm progress.

◦ End of Alarm pushbutton and Alarm Filter.

◦ Intercom analog output.

FEATURES

EMERGENCY COMPACT TELEPHONE FLUSH MOUNTED

MMK-656 CE

BENEFITS

EN 81-28

MERak - 12

TECHNICAL DETAILS

Voltage: 10-30 Vdc

Consumption in stand by: 70 mA a 12 Vdc


Battery Charge: 1 A


Weight: 470 gr.



Periodic test calls with customizable period up to 3 days.


Intercom with machine room.


Connect up to 4 lift cabins sharing the same telephone line without any extra wiring.

3 Programming modes: Remote programming through calling the Device from any telephone with DTMF dialing, local programming through intercom (Handset MMk-616) and programming through preprogrammed micro SD memory card.

Voice Synthesizer.

Floor Announcer (Connectivity with lift controller through RS-485 port).

Languages: English, Spanish, French, Italian, German, Portuguese, Catalan, (Available to introduce new languages).

Programmable Automatic Battery Control.

Toughness against overvoltage.




Build in stainless steel faceplate with anti-vandalism protection.

FEATURES

MEASURES (MM)

MERak - 13

GSM emergency telephone that provides M2M connection through communication ports and with state-of-the-art quality digital audio technology.

◦ Up to 4 audios powered through CAN BUS (no need for charger or battery in the cabin).

◦ Supports all GSM operators.

◦ Full duplex triphonie (simultaneous conversation from every audio unit)

◦ Local programming through analog telephone assisted by voice (MMk-616).

◦ Adjustable speaker power: adapt the volume to the acoustic contitions of the cabin.

DIGITAL EMERGENCY TELEPHONE & AUDIO MODULE

◦ Power supply: 24V/1A.

◦ Quadband (GSM 850/900/1800/1900 MHz) and GPRS (2G network).

◦ Communications ports: RS232, CAN BUS, RS485 and 2 programmable general purpose pins.

◦ Remote management through IP/ GPRS.

◦ Multilanguage

◦ External GSM Antenna 900/1800 Mhz.

◦ Supports standard SIM card.

FEATURES

MEP-GW & AUDIO

BENEFITS

EN 81-28 / EN 81-70

MERak - 14

Total integration and compatibility

GSM Gateways

MERak - 15

New Range ofGSM/M2MGateway for Lifts

EN 81-82 fully compliant

Designed for elevators

2G, 3G, 4G and LTE versions

Remote IP management

High Audio Qualitity

MEP-737F

MEP-737H

MEP-737N

MERak - 16

GSM/M2M Gateway designed for the lift industry with entirely digital internal system. Supplies mobile phone line to emergency phones and provides connection to the lift controller to remote monitoring.

◦ Designed in order to offer an entirely digital internal system

◦ The full version offers RS232, 485 and CANBUS data connectivity

◦ Developed to work with MERak’s CANBUS audio digital intercom system

◦ Power output for cabin device phone (12 24V)

◦ Disposes of two inputs allowing monitoring events and two outputs, including one indicating the lack of coverage

◦ Can be produced for 2G, 3G and 4G GSM networks and is compatible with the Merak LiftMonitor Cloud platform

GSM/M2M GATEWAY FOR LIFTS / INTERCOM SYSTEM

◦ Remote management by IP / GPRS

◦ 2G, 3G and 4G connectivity

◦ Complies with ETSI standard ES 202 971

◦ Power consumption: 65 mA minimum; 270 mA maximum.

◦ Communications ports: RS232, CAN BUS, RS485 and 2 in optocoupler and 2 outputs.

◦ Data gateway DTMF-IP.



◦ Box content: GSM/M2M Gateway, external antenna, adaptor 12V/2A, quick setup guide.

FEATURES

MEP-737F

Dimensions (height x width x depth): 210 x 90 x 27 mm

Weight: 350 gr.

MEASURES (MM)

BENEFITS

EN 81-28

MERak - 17

Operating temperatures: -10º+C to 55+C

Safety: Safe Access Code

Connectivity: RS232 Port / RS485 Port / CAN BUS

CAN Bus: 2 (optional)

2 IN optocoupler and 2 OUTPUTS

FXS port for telephone line and optional FXO port

SMA antenna connector

Power switch

Box Contents: GSM-/M2M gateway MMk-737

External GSM antenna 900/1800 MHz

12V / 2A adaptor AC/DC

DIN rail guides

Quick Setup Guide

Standards: FXS output according to standard ETSI ES 202 971. Harmonized specification of physical and electrical characteristics at a 2-wire analogue for short line interface.

Power: Internal rechargeable lithium-ion battery

Internal security battery

Voltage: 12 Vdc ±20% / 2A

Consumption in standby: 100 mA

Active power consumption: 230 mA (max)

Consumption charging the battery: +200 mA

Performance: Europe: Dualband; Other: Quadband (GSM 850/900/1800/1900 MHz) and GPRS

IP data transmission for remote monitoring (M2M)

Programming through SMS and Lift Monitor

Alarm indicating low battery and network error

Open to any mobile operator

Compatible with standard SIM cards

Call divert programmable telephone numbers

Programmable notifications

Selectable events notifications

SMS notification of power failure

Programmable alarm by SMS of repetitive calls

Supports ETSI land line phones

Status indicator LED

Battery indicator LED

Coverage level indicator LEDs

Prepared for wall anchorage with external screws or DIN rail

SPECIFICATIONS

MERak - 18


















FEATURES

MEP-737H

BENEFITS

EN 81-28


Weight: 350 gr.

MEASURES (MM)

MERak - 19








Power switch




DIN rail guides

Quick Setup Guide
























SPECIFICATIONS

MERak - 20


















FEATURES

MEP-737N

BENEFITS

EN 81-28


Weight: 350 gr.

MEASURES (MM)

MERak - 21








Power switch




DIN rail guides

Quick Setup Guide
























SPECIFICATIONS

MERak - 22

GSM/M2M Gateway designed for the lift industry that supplies mobile phone line to analog emergency phones and provides connection to the lift controller to remote monitoring.

◦ Compatible with any analog emergency phone for lifts using DTMF tones.


◦ Designed to fulfill with the EN 81-28 standard.

◦ Prepared for wall anchorage with external screws or DIN rail.

◦ Internal safety battery for power failure situations.

◦ Allows remote lift controller monitoring through standard data interfaces.

GSM/M2M GATEWAY FOR LIFTS



◦ Quadband (GSM 850/900/1800/1900 MHz) and GPRS.

◦ Communications ports: RS232, CAN BUS, RS485 and 2 general purpose pins.

◦ Remote management through IP/GPRS.

◦ Data gateway DTMF-CSD, DTMF-IP.



FEATURES

MMk-736F


Weight: 350 gr.

MEASURES (MM)

BENEFITS

EN 81-28

MERak - 23





Operating temperatures: -10±C to 55±C


Connectivity: RS232 Port / RS485 Port


GPOS: 2 pins

FXS port for telephone line: 2 connectors


Power switch

Supports telephones connected in parallel: Up to 4

Box Contents: GSM-M2M gateway MMk-736F


12V / 2A wall-mounted power supply

DIN rail guides

Quick Setup Guide

Standards: ETSI ES 202 971 Access and Terminals (AT); Public Switched Telephone Network (PSTN); Harmonized specification of physical and electrical characteristics at a 2-wire analogue for short line interface.




Consumption in stand by: 100 mA

Active power consumption: 230 mA

Consumption charging the battery:+200 mA

Platform: Hardware: CIG005A3

Software: 1.0.3 or superior

Remotely upgradeable firmware

Performance: Quadband (GSM 850/900/1800/1900 MHz) and GPRS


Programming through SMS


Automatic selection of the type of call (voice/data)



Call forwarding programmable telephone numbers

Programmable activation notifications


Programmable alarm by SMS of overflow calls

Supports every analog line telephone

Controls repetitive calls

SPECIFICATIONS

MERak - 24

GSM/M2M Gateway designed for the lift industry that supplies mobile phone line to analog emergency phones.

◦ Compatible with any analog emergency phone for lifts using DTMF tones.


◦ Designed to fulfill with the EN 81-28 standard.

◦ Prepared for wall anchorage with external screws or DIN rail.

◦ Internal safety battery for power failure situations.

GSM/M2M GATEWAY FOR LIFTS


◦ Power consumption: 65 mA minimum; 270 mA maximum

◦ Quadband (GSM 850/900/1800/1900 MHz) and GPRS.

◦ Remote management through IP/GPRS

◦ Data gateway DTMF-CSD, DTMF-IP.



FEATURES

MMk-736N


Weight: 350 gr.

MEASURES (MM)

BENEFITS

EN 81-28

MERak - 25





Operating temperatures: -10±C to 55±C


Connectivity: GPOS: 2 pins

FXS port for telephone line: 2 connectors


Power switch

Supports telephones connected in parallel: Up to 4

Box Contents: GSM-M2M gateway MMk-736N


12V / 2A wall-mounted power supply

DIN rail guides

Quick Setup Guide

Standards: ETSI ES 202 971 Access and Terminals (AT); Public Switched Telephone Network (PSTN); Harmonized specification of physical and electrical characteristics at a 2-wire analogue for short line interface.




Consumption in stand by: 100 mA

Active power consumption: 230 mA

Consumption charging the battery:+200 mA

Platform: Hardware: CIG005A3

Software: 1.0.3 or superior

Remotely upgradeable firmware

Performance: Quadband (GSM 850/900/1800/1900 MHz) and GPRS


Programming through SMS


Automatic selection of the type of call (voice/data)



Call forwarding programmable telephone numbers

Programmable activation notifications


Programmable alarm by SMS of overflow calls

Supports every analog line telephone

Controls repetitive calls

SPECIFICATIONS

MERak - 26

All that you need tocomply with the EN 81-28in one device

Software

MERak - 27

BENEFITS

The Merak Emergency Devices Management Service allows for the control and programming of every Merak Emergency Landline Phone or GSM Gateway installed on your fleet of elevators remotely from any Internet connected computer or smart device. It’s a comprehensive solution which ensures a better service from end to end.

◦ Permanent control (24 x 7 x 365)

◦ Telephone test management

◦ Device programming

◦ Warning alerts

◦ Device and telephone line renting

◦ Accessible from PC, tablet and smartphones

◦ Three different levels of service

MERAK CLOUD PLATFORM

Lift monitor

MERak - 28

Remote telephone programming

Modify the operation parameters of your MERak emergency telephones

Remote GSM Gateway programming

Set up call forwardings, notifications of events and other functions of the MERak GSM gateways

Basic information of your devices

Centralize data on location, status and identifiers of the entire fleet of installed MERak devices

Acces to Plug&Play service

Activate your MERak Lift Monitor account and program your personal settings on emergency telephones and GSM gateways: by just pressing a button!

Data input through templates

You can register new devices using your own programmed templates

Telephone test management

Receiving and controlling periodic simulated emergency calls according to the EN 81-28 standard

Monitoring battery status

Check the charge level of the MERak devices batteries

Emergency call alert

Get email alerts in case of an emergency call in installations with a MERak gateway

FEATURES

MERak - 29

Easy and fast installation, work comfortably with the content

Kits

MERak - 30

◦ Compact Emergency Telephone MMk-656

◦ Lead Acid Battery Charger

◦ Lead Acid Battery

◦ Enlightened Alarm Pushbutton

◦ 3m cable with RJ-45 terminals for MERak analog Audio Modules

FEATURES

BENEFITS

◦ Compatible with all analog Audio Module of MERak.

◦ Easy and fast installation.

◦ Wide box that allows to work comfortably with the content.

◦ Safe way to carry and keep all components.

◦ Enlightened pushbutton to activate alarm in entrapment situations.

Box that includes kit for emergency situations and compact emergency tele-phone. Prepared to be installed on top of the cabin and to be complemented with an analog Audio Module.

COMPONENT BOX KIT FOR LIFTS WITH COMPACT EMERGENCY TELEPHONE

MMk-996

MEASURES (MM)

EN 81-28

MERak - 31

Box that includes kit for emergency situations. Prepared to be installed on top of the cabin and to be complemented with an analog Compact Emergency Telephone.

◦ Compatible with all analog Audio Module of MERak.


◦ Wide box that allows to work comfortably with the content.

◦ Safe way to carry and keep all components.

◦ Enlightened pushbutton to activate alarm in entrapment situations.

COMPONENT BOX KIT FOR LIFTS

◦ Lead Acid Battery Charger

◦ Lead Acid Battery

◦ Enlightened Alarm Pushbutton

◦ 3m cable with terminals to connect to Compact Emergency Telephones

FEATURES

MMk-956

MEASURES (MM)

EN 81-28

BENEFITS

MERak - 32

Box with built-in Alarm Pushbutton for emergency situations under the cabin.

◦ Compatible with all analog Compact Emergency Telephone of MERak.

◦ Provides a calling point under the cabin.


◦ Enlightened to facilitate its location in an emergency situation.

ENLIGHTENED ALARM PUSHBUTTON FOR UNDER THE CABIN

◦ Enlightened Pushbutton

◦ 4m cable with terminals to connect to

◦ compact Emergency Telephones

FEATURES

MMk-902

BENEFITS

MEASURES (MM)

MERak - 33

Customizable and efficient Accessories

Accessories

MERak - 34

Expansion module for assembling lift buttons with incorporated audio and connectors for loudspeaker, microphone, pushbuttons and external LEDs.

◦ Reduced size: it adapts easily to your needs

◦ Full panel of connectors to attach loudspeaker, pushbuttons, microphone and external LEDs

◦ Optimal quality sounds due to a high sensitivity integrated microphone

◦ Secure two-way communications with the alarm receiving centre

◦ Complies with the EN 81-70 standard: High brightness LED indicators

AUDIO EXPANSION MODULE

◦ Designed for maximum customization of the installation: Fits various cabin settings.

◦ Full connector panel that allows plug in wires of variable length to the speaker, the pushbuttons and the external LEDs.

◦ Can be cascaded with other audio modules.

◦ Full-duplex communication with the alarm receiving center.

◦ High brightness LEDs yellow and green that indicate the status of the emergency call by different selectable patterns of flashes (EN 81-28).

FEATURES

MMk-699

MEASURES (MM)

BENEFITS

EN 81-28 / EN 81-70

MERak - 35

◦ Size adapted to fit behind the cabin operator panel.

◦ Complies with the requirements of the EN 81-70 referring to the visible and audible signals.

◦ Bult-in bright yellow and green LEDs in accordance with the EN 81-70 standard.

◦ Connection for optional external microphone

Analog audio module for cabin, flush mounted with anti-vandal protection and yellow and green LEDs that indicate the status of emergency calls.

◦ Adjustable speaker power: adapt the volume to the acoustic conditions of the cabin.

◦ High quality sound due to its integrated highly sensitive microphone.

◦ Secure bidirectional communications with the alarm receiving center.

◦ Equipped with an effective anti-vandal protection.

◦ Compatible with all analog emergency telephones of MERak.

ANALOG AUDIO MODULE FLUSH MOUNTED

MMk-698C

FEATURES

MEASURES (MM)

BENEFITS

EN 81-28 / EN 81-70

MERak - 36

Audio for cabin operator panel, mounted on a galvanized plate with anti-vandal protection and yellow and green LEDs that indicate the status of emergency calls in accordance with the standard EN 81-70.






ANALOG AUDIO MODULE 143 X 70 X 40 MM




◦ Connection for optional external microphone.

FEATURES

MMk-698

MEASURES (MM)

BENEFITS

EN 81-28 / EN 81-70

MERak - 37

Audio for cabin operator panel, mounted on a galvanized plate with anti-vandal protection and yellow and green LEDs that indicate the status of emergency calls.






ANALOG AUDIO MODULE 120 X 90 X 30 MM




◦ Connection for optional exteral microphone.

FEATURES

MMk-694

MEASURES (MM)

EN 81-28 / EN 81-70

BENEFITS

MERak - 38

Stainless steel faceplate with anti-vandalism protection for fush mount MMk-694.

◦ Perforated for the placement of the speaker, the microphone, the optical signals and the alarm button of the emergency unit.

◦ Integrates the engraved and painted symbols and indications that are necessary to meet the standard EN 81-70 of requirements for disabled people.

◦ Guarantees the vandal-proof effect without adding intermediate parts, as required by the European standard EN 81-70.

◦ Perfectly adaptable to MERak telephone modules.

◦ Can integrate a backlit alarm button.

STAINLESS STEEL FACEPLATE

◦ Stainless steel 18/8 (AISI-340)

◦ Weight: 170 g.

◦ Adaptable to analog audio module MMk-694

◦ External dimensions (mm): 135 x 125

◦ Faceplate dimensions (mm): 125 x 90

FEATURES

MMk-397

MEASURES (MM)

BENEFITS

MERak - 39

Analog telephone handset type to be installed in the machinery room. Designed to operate programming keyboard and as intercom for lift emergency telephones.

◦ Has a full set of keys to generate de full set of DTMF tones (1, 2, 3, 4, 5, 6, 7, 8, 9, 0, *, #, A, B, C, D) and programming emergency telephones for lifts.

◦ Separate keyboard and earphone for a more comfortable use.

◦ Can be used as an intercom between machinery room and the emergency telephone in the lift car.

◦ Easy placement in wall or desktop positions.

HANDSET WITH KEYBOARD FOR LIFTS

◦ Designed to be used as an intercom and for consult and programming lift emergency telephones settings.

◦ Can be used as a regular telephone for calling or test the operation of the telephone line.

◦ Complies with the 1999/5/CE policy (March 9, 1999).

◦ Adapted to the standards of electromagnetic compatibility and electrical safety (EN60950 : 2000; EN55022 : 1998; EN55024 : 1998).

FEATURES

MMk-616

MEASURES (MM)

BENEFITS

EN 81-28

MERak - 40

Filter for telephone line that provides extra protection against storms and electric discharges to the devices connected to the telephone line including emergency telephones.

◦ Activates upon sensing an overvoltage on the telephone line and prevents the irreversible damage that can cause an electric discharge in the emergency telephones.

◦ Offers two levels of overvoltage protection: through exploders and through gas-lamp.

◦ Easy to install: wall placed in the telephone line, between the NTP and the lift.

◦ The connections to the telephone line and the grounding are done with screws.

◦ The filter must be grounded for the protection to be effective.

PROTECTION FILTER AGAINST OVERVOLTAGE IN TELEPHONE LINES

◦ Nominal line voltage (Un) 150V.

◦ Maximum line voltage (Uc) 170 V.

◦ Minimum limiting voltage 190 V.

FEATURES

MMk-617

MEASURES (MM)

BENEFITS

MERak - 41

Power supply unit for emergency telephones MMk-656


◦ Voltage: 12 Vdc

◦ Capacity: 2,5 Ah

◦ Weight: 0,95 Kg.

◦ Voltage: 12 Vdc

◦ Capacity: 3,4 Ah

◦ Weight: 1,32 Kg.

FEATURES

MEASURES

MEASURES

FEATURES

MMk-223

MMk-234

◦ Dimensions (mm): 178 x 35 x 65


MERak - 42


Li-Ion power supply unit for GSM Gateway

◦ Voltage: 12Vdc

◦ Capacity: 0.8 Ah

◦ Weight: 0.36 Kg.

◦ JST SMP-02-BC male connector with 2 circuits

◦ Voltage: 3,7 Vdc

◦ Capacity: 2.2 Ah

◦ Weight: 48 g.

FEATURES

FEATURES

MMk-208

MMk-220


◦ Dimensions (mm): 65.05 x 18.4 x 18.4

MEASURES

MEASURES

MERak - 43

Cables to connect the battery to the phone MMk-656

Cable with RJ-45 terminals to connect MERak analog emergency telephones and audo modules.

◦ Two connection cables

◦ Two faston connectors

◦ Two male connectors for crimping

◦ Built-in 2A fuse 5x20 mm

◦ Cable RJ-45 CAT5e

◦ Two connectors RJ-45

FEATURES

MEASURES

MEASURES

FEATURES

MMk-622

MMk-630

◦ 60 centimeters in length (each)

◦ Longitude: 10 m.

MERak - 44

Cable with RJ-45 terminals to connect MERak analog emergency telephones and audio modules.

Cable with RJ-45 terminals to connect MERak analog emergency telephones and audio modules.

◦ Cable RJ-45 CAT5e.


◦ Cable RJ-45 CAT5e.


FEATURES

FEATURES

MMk-633

MMk-635

MEASURES

MEASURES

◦ Longitude: 3 m.

◦ Longitude: 50 cm.

MERak - 45

Smart charger for 12V / 1A lead-acid batteries.

Power supply unit of 12V/2A for GSM Gateways.

◦ Two load levels: It works with two levels of charge (one for the recovery of the batteries and another for the maintenance of the load) that ensure the maximum longevity of the batteries.

◦ Connection Terminals: It is equipped with the necessary terminals for the connection to both the emergency telephone and the battery.

◦ Removable plug: can adapt to different types of wall sockets

◦ Approved for operation with MERak range of GSM Gateways MMK-736.

◦ Input: 100-250Vac, 50 / 60Hz.

◦ Output: 12Vdc, 1.0A.

◦ Input: 100-240 v-50/60Hz 0,55A.

◦ Output: 12 Vdc 2A

◦ Includes terminals to a lead battery the power charger integrated into the MMk-656 units.

FEATURES

FEATURES

MMk-107

MMk-108

BENEFITS

BENEFITS

MERak - 46

Power supply unit for emergency phones MMk-656.

◦ Removable plug: can adapt to different types of wall sockets

◦ Approved for operation with MERak range of GSM Gateways MMK-736.

◦ Input: 100-240 v-50/60Hz 0,55A.

◦ Output: 12 Vdc 2A

◦

FEATURES

MMk-120

BENEFITS

MERak - 47

Seriousness, technical capacity, specialized service and continuous improvement

General Information

MERak - 48

MERak Products WarrantyAll the MERak accessories and units have been subjected to strict quality controls before manufacturing. In case of detecting any malfunctioning, we recommend to see the installation, connecting and programming instructions available in our web site.

If the product presents any manufacturing fault, MERak undertakes to repair or replace within two years from the delivery date, in according to the current European regulation. Moreover, with the aim of improving constantly and in order to provide the best possible service to its clients, MERak repairs, updates and replaces certain products out of the guarantee period, if considered reasonable.

The MERak warranty does not cover damages for the use or the improper connection of its units nor the damages caused by overvoltages and electric storms.MERak puts at the disposal of its clients all the necessary information for the installation, the connecting and the programming of its telephones, including the operating guides, handbooks, technical specifications, image galleries and support tools.

To learn more about the terms and conditions of the MERak Products Warranty, visit our website www.merakeurope.com.

MERak - 49

Av. Sarrià 67 bis.08029 Barcelona, Spain

Phone: + 34 93 363 14 28Email: [email protected]

Google +: Merak Connecting LiftsLinkedin: MERak SL

www.merak.eswww.merakeurope.com

Contact

VISIT OUR WEBSITE

specialists in communications for the elevator ... - merakmaildocs.merak.es/02a-merak-catalogo...

Documents