specification for approval...form no.:fp-10-017 reva/0 文本格式：gsa specification for approval...

深圳茂硕电子科技有限公司

SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD

Form No.:FP-10-017 RevA/0

文本格式：GSA

Specification for Approval

Address: XiLi Songbai Road 1061, Nanshan District, Shenzhen City, Guangdong Province, P.R.China

Post Code: 518108

TEL: 0755-27657000 FAX: 0755-27657908

E-mail: [email protected] Web site: http://www.mosopower.com

Product Name: 150W Class II LED driver

Product Model:

LCP-150M214 LCP-150R214

LCP-150D214 LCP-150M214A12

LCP-150D214A12

Rev. B.2 Sample Date:

CUSTOMER AUTHORIZED SIGNATURE Tested By Checked By Approved By

(Company seal)Return one copy to MOSO with approved signature and company seal.

mailto:[email protected]://www.mosopower.com



Form No.:FP-10-017 RevA/0

文本格式：GSA

Product Specification

Address: XiLi Songbai Road 1061, Nanshan District, Shenzhen City, Guangdong Province, P.R.China

Post Code: 518108

TEL: 0755-27657000 FAX: 0755-27657908

E-mail: [email protected] Web site: http://www.mosopower.com

Prepared By Checked By Approved By

Product Name: 150W Class II LED driver

Product Model:

LCP-150M214

LCP-150R214

LCP-150D214 LCP-150M214A12

LCP-150D214A12 Rev. B.2

Prepared By Checked By Approved By

mailto:[email protected]://www.mosopower.com



Form No.:FP-10-017 RevA/0 I

ECN History

Rev. Description of Change

Changed Date Notes Before After

A.1 Original Release --- 2016-09-20

B.2 ECR单号:PECN201609092 2016-09-22 李永清



Form No.:FP-10-017 RevA/0 II

Contents

1 Scope ............................................................................................................................................. 1 2 Input Characteristics .................................................................................................................... 1

2.1 Input Voltage and Frequency ............................................................................................ 1 2.2 AC Input Current ................................................................................................................. 1 2.3 Inrush Current ( Cold Start ) .............................................................................................. 1 2.4 Power Factor ....................................................................................................................... 1 2.5 Efficiency .............................................................................................................................. 1 2.6 THDi ...................................................................................................................................... 1

3 Output Characteristic ................................................................................................................... 1 3.1 Output Power....................................................................................................................... 1 3.2 Output Voltage and Current .............................................................................................. 1 3.3 Output Current Ripple ........................................................................................................ 2 3.4 Cold Start Turn-On Delay Time ........................................................................................ 2 3.5 Output Current Overshoot ................................................................................................. 3 3.6 Line Regulation (Input Voltage Regulation) .................................................................... 3 3.7 Load Regulation .................................................................................................................. 3

4 Dimming Control .......................................................................................................................... 3 4.1 Function ................................................................................................................................ 3 4.2 Dimming Interface............................................................................................................... 3 4.3 Dimming Curve ................................................................................................................... 4

5 Protect Function ........................................................................................................................... 5 5.1 Short Circuit Protect ........................................................................................................... 5 5.2 Over Temperature Protect ................................................................................................ 5

6 Derating Curve .............................................................................................................................. 5 7 Efficiency vs Load Curve ............................................................................................................... 6 8 Power Factor vs. Load Curve ........................................................................................................ 7 9 THD Curve ..................................................................................................................................... 7 10 Safety and Electromagnetic Compatibility .................................................................................. 7

10.1 Safety Standards .............................................................................................................. 7 10.2 Electromagnetic Compatibility Standards ..................................................................... 8

11 Details Of Safety Specifications ................................................................................................... 8 11.1 Dielectric Strength ............................................................................................................ 8 11.2 Grounding Resistance ..................................................................................................... 8 11.3 Leakage Current ............................................................................................................... 8 11.4 Insulation Resistance ....................................................................................................... 8 11.5 Surge Immunity Test ........................................................................................................ 8

12 Environmental Specifications ...................................................................................................... 9 12.1 Operated Temperature and Humidity ............................................................................ 9



Form No.:FP-10-017 RevA/0 III

12.2 Storage Temperature and Humidity .............................................................................. 9 12.3 Degrees of Protection ...................................................................................................... 9

13 Reliability ...................................................................................................................................... 9 13.1 Mean Time Between Failure (MTBF) Qualification (According to MIL-HDBK-217F Standards) .................................................................................................................................. 9 13.2 Life Time Qualification ..................................................................................................... 9 13.3 Vibration ............................................................................................................................. 9 13.4 Drop Test ......................................................................................................................... 10

14 Mechanical Outline Drawing ..................................................................................................... 10 15 Label ............................................................................................................................................ 12 16 Weight ......................................................................................................................................... 14



Form No.:FP-10-016 RevA/0 Page1of 14

1 Scope

This document defines the electrical, mechanical and environmental specifications of a 150W Class II LED driver. The LED driver shall meet the RoHS requirement.

This enclosure of LED driver is:

■ With AL Case □ With Plastic Case □ Open Frame □ Others

2 Input Characteristics

2.1 Input Voltage and Frequency

Item Minimum Rated Value Maximum

Input Voltage 176Vac 200-277Vac 305Vac

Input Frequency 47Hz 50/60 Hz 63Hz

2.2 AC Input Current

Under 25℃±10℃ ambient temperature, rated input and output range, maximum AC input current is 1.2A.

2.3 Inrush Current ( Cold Start )

Under 25℃±10℃ ambient temperature, 230Vac input, the peak value of the inrush current is less than 75A.

2.4 Power Factor

2.4.1 Under 25℃±10℃ ambient temperature, 230Vac input, 100% load, the typical value of power factor is 0.96, the minimum value is 0.95.

2.5 Efficiency

2.5.1 Under 25 ±10 ambient temperature, ℃ ℃ 230Vac input,136V output voltage, 100% load, the typical value of efficiency is 90%, the minimum value is 88%;

2.5.2 Under 25 ±10 ambient temperature, ℃ ℃ 230Vac input, 214V output voltage, 100% load, the typical value of efficiency is 93%, the minimum value is 91%.

2.6 THD

2.6.1 Under 25 ±10 ambient temper℃ ℃ ature, 230Vac input, 70～100% load, THD is less than 20% .

3 Output Characteristic

3.1 Output Power

Under full input voltage range, the maximum value of output power is 150 W.

3.2 Output Voltage and Current




Item ( Unit ) Value Test Condition ( Under 25 ±10 Ambie℃ ℃ nt Temperature ) Adjust Range of

Output Current ( A ) 0.11～1.10 full input voltage range

Adjust Range of Output Voltage( V ) 80～214 full input voltage range

Error of Output Current ±5%【1】 full input voltage range, full load range No Load

Output Voltage（V） ≤240V full input voltage range

Auxiliary Power Supply【2】 12V±5% /

0.2A /

Leave Factory Default Output

Spec

143V【3】 full input voltage range

1.05A【4】 full input voltage range

Note：

1. depended on maximum output current; 2. only for the LCP-150M214A12 and LCP-150D214A12; 3. leave factory default full load rating output voltage; 4. default output current can setting.

Output voltag e vs . Output c urrent c urve

0.70 , 214

1.10 , 80

1.10 , 136

0.11 , 214

0.21, 60

7085

100115130145160175190205220

0.00 0.11 0.22 0.33 0.44 0.55 0.66 0.77 0.88 0.99 1.10Output c urrent(A)

Out

put v

olta

ge(V

)

3.3 Output Current Ripple

Under 25 ±10 ambient temperature, ℃ ℃ 230Vac input, 100% load, the ratio of output current ripple【1】 peak-peak value and rated output current is less than 10%.

Note: load is LED, ripple is different with difference LED load.

3.4 Cold Start Turn-On Delay Time

Under 25 ±10 ambient temperature℃ ℃ , 230Vac input, 100% load, turn-on delay time at cold start is less than 2s; 176Vac input, less than3 s.




3.5 Output Current Overshoot

Under 25 ±10 ambient temperature,℃ ℃ 200-277Vac input, LED full load, the ratio of output current overshoot and rated output current is less than 10%.

3.6 Line Regulation (Input Voltage Regulation)

Under 25 ±10 ambient temperature℃ ℃ , 100% load, change input from 176Vac to 305Vac, the Line Regulation (Input Voltage Regulation) is less than 1%.

3.7 Load Regulation

Under 25 ±10 ambient temperature,℃ ℃ 230Vac input voltage, change load from 50% to 100%, Load Regulation is less than 3%.

4 Dimming Control

4.1 Function

Function 0-10V PWM Time Control DAL I Control

Yes Or No √ √ √ √

Note: 1. Normal leave factory product does not have time control function, MOSO will supply standard setting software for user to program when user need time control.

2. User can setting five time section. Customer can change the output current and the time depend on “MOSO programmer User Manual”.

4.2 Dimming Interface

Mode Electrical Interface

PWM Dimming

Frequency 250Hz～1000Hz

High Voltage Level 9.7～10.3V or 4.85～5.15V

Low Voltage Level 0～0.3V

Sink Current




4.3 Dimming Curve

DALI dimming curve

20

0

10

30

40

50

60

70

80

90

100

0 50 100 150 200

Power level

arc

pow

er(%

)

Linear dimming curve Logarithmic dimming curve

250

Note: Factory Default Output Logarithmic Curve

0-10V&PWM dimming curve

0-10V/P WM Dimming C urve

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0 1 2 3 4 5 6 7 8 9 10 11 12 0-10V

Typi

cal V

alue

of R

ated

Out

put C

urre

nt Io

/Ir

0-10V Dimming C urve P WM Dimming C urve

P W M 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 100% 100%




5 Protect Function

5.1 Short Circuit Protect

Constant current output when the output rail short, the power supply shall be self-recovery when the fault condition is removed.

5.2 Over Temperature Protect

When the temperature of power supply enclosure is over 85℃, the output of power supply shall decrease. Output current is limited in 30% ( typ. ) . meet the demand of double 85, at the maximum operation temperature 125 ℃, operate two hours and do not damage.

6 Derating Curve

100

80

60

40

20

0-40 -20 -5 10 25 50 60 70

Ambient Temperature(℃)

Load

(%)

Derating Curve

200-277Vac




7 Efficiency vs. Load Curve

Vin=230Vac Ta=25℃

E ffic ienc y vs . Output voltag e c urve

80

82

84

86

88

90

92

94

96

70 85 100 115 130 145 160 175 190 205 220Output voltag e(V)

Effi

cien

cy(%

)

1.10A0.88A0.70A

Vin=277Vac Ta=25℃

E ffic ienc y vs . Output voltag e c urve

80

82

84

86

88

90

92

94

96

70 85 100 115 130 145 160 175 190 205 220Output voltag e(V)

Eff

icie

ncy(

%)

1.10A0.88A0.70A




8 Power Factor vs. Load Curve

P ower fac tor vs . Output power c urve

0.80

0.82

0.84

0.86

0.88

0.90

0.92

0.94

0.96

0.98

1.00

75 90 105 120 135 150Output power(W)

PF

277VAC

230VAC

9 THD Curve

THD vs. Load curve

8%

9%

10%

11%

12%

13%

14%

70% 80% 90% 100%

230Vac 277Vac

THD

Load

10 Safety and Electromagnetic Compatibility

10.1 Safety Standards

Safety Certification Country and region Standards Whether have Certification

CCC China GB19510.1

GB19510.14

CE Europe EN61347-1

√ EN61347-2-13




CB CB member IEC61347-1

√ IEC61347-2-13

UL America

UL 8750

UL 1310（Class 2 Power Units）

UL 1012

cUL Canada

CSA C22.2 No.250.13-12 CSA C22.2 No.223-M91（Power Supplies

With Extra-Low-Voltage Class 2 Outputs）

AS/NZS 61347.1

10.2 Electromagnetic Compatibility Standards

EMC Certification Country and region Standards Whether have Certification

CCC China GB 17743

GB 17625.1

CE America Europe

EN 55015 CLASSB(input 230Vac)

√ IEC 61000-3-2

IEC 61000-3-3

IEC 61547

11 Details Of Safety Specifications

11.1 Dielectric Strength

11.1.1 input to output : 3750Vac, 60s, current is less than 10mA;

11.1.2 input to case : 3750Vac, 60s, current is less than 10mA;

11.1.3 output to case : 2000Vac, 60s, current is less than 10mA;

11.2 Grounding Resistance

Under 25℃±10℃ ambient temperature, pass 25A current for 60s, the measured grounding resistance is less than 0.1Ω.

11.3 Leakage Current

Leakage Current is defined as the current flowing through the ground wire. Under 25℃±10℃ ambient temperature and 277Vac/50Hz input, the leakage current shall be less than 0.7mA.

11.4 Insulation Resistance

Under 25℃±10℃ ambient temperature and less than 70% relative humidity, apply 500V dc voltage to each port of Input to output, input to case, output to case and last 60s, the insulation resistance at least 50MΩ.

11.5 Surge Immunity Test

Under 25 ±10 ambient temperature, l℃ ℃ ine to line is 5000V.




12 Environmental Specifications

12.1 Operated Temperature and Humidity

12.1.1 Temperature: -40℃ to +70℃(reference the Temperature vs. Load Curve)；

12.1.2 Relative Humidity: 20% to 95%, non-condensing.

12.2 Storage Temperature and Humidity

12.2.1 Temperature: -40℃ to +85℃;

12.2.2 Relative Humidity: 10% to 95%, non-condensing.

12.3 Degrees of Protection

IP67

13 Reliability

13.1 Mean Time Between Failure (MTBF) Qualification (According to MIL-HDBK-217F Standards)

Mean time between failure is at least 200，000 hours under 25℃ ambient temperature, 230Vac input, and 80% load.

13.2 Life Time Qualification

The life time is at least 50, 000 hours, under 70℃ case temperature, 230Vac input, and 100% load.

L ife vs . T c c urve

0

50

100

150

200

250

300

30 40 50 60 70 80 90 100T c (°C )

Life（

KH

ours）

13.3 Vibration

10 to 500HZ Sweep at constant acceleration of 1.0G (depth: 3.5mm) for 1 Hour for each of the perpendicular axes X, Y, Z.




13.4 Drop Test

Ten times 60cm drop test with one angle three edges and six face of complete package, package shall not damage, product function and dielectric strength should meet the requirement.

14 Mechanical Outline Drawing

LCP-150M214

Dimming wire

Output wire

Infrared programming interface

Input wire

Black

RedWhite

Brown

Blue

Black

LCP-150R214

Output wire

Infrared programming interface

Input wire

Black

Red

Brown

Blue




LCP-150D214

Dimming wire

Output wire

Input wire Red

White

Brown

Blue

Black

LCP-150M214A12

OUTPUT

Dimming wire and out 12V wire

Output wireOutput wire

AC INPUT RedBlack

WhiteBlack

Red 12V+Transparent 12V-

Dimming wire




LCP-150D214A12

OUTPUT

Dimming wire and out 12V wire

Output wireOutput wire

AC INPUT RedBlack

WhiteBlack

Red 12V+Transparent 12V-

Dimming wire

15 Label

Wire Specification Note AC Input CCC+VDE 2x1.0mm2 L=600mm —

DC Output UL 2x18AWG L=450mm —

Dimming 22# 2C L=400mm for LCP-150M214or LCP-150D214 22# 4C L=400mm for LCP-150M214A12 or

LCP-150D214A12




16 Weight

950±50g

specification for approval...form no.:fp-10-017 reva/0 文本格式：gsa specification for approval...

Documents