Specification for Renovation of Civil and Electrical works, supplying of furniture in Career Guidance &

Employment Support Cell of Panchagarh Technical School and College (PTSC). A) Civil works.

Sl. no Description of Work Unit Quantity Unit rate

(BDT) Total cost (BDT)

1. Supplying, fitting and fixing of country made mirror polished homogeneous floor tiles irrespective of color & or design, 600 x 600 mm

Sqm 100

2. Supplying, fitting and fixing country made mirror polished homogeneous floor tiles irrespective of color & or design, 300 x 300 mm

Sqm 10

3. Supplying, fitting and fixing country made wall tiles irrespective of color & or design, 300 x 200 mm

Sqm 50

4. Stripping of unserviceable plaster in/c racking out joints, brooming, cleaning etc

Sqm 419

5. Minimum 12 mm thick cement sand (F.M. 1.2) plaster (1:6) having with cement to wall both inner-and outer surface, Quantity same as item No-4

Sqm 419

6. Ornamental Wooden door frame including fitting, fixing and finishing made by Jack wood as per LGED specification. Door Frame

M3 0.3

7. Ornamental Wooden door shutter (38mm thick) including fitting fixing & finishing made by Jack wood as per LGED specification. Door shutter 9’-0”x10’-0” size=90 sft=8.5 m2

Sqm 8.5

8. Supplying, fitting & fixing of hydraulic door closer (big size) inc all necessary tools and accessories etc. all complete

No. 2

9. Supplying, fitting and fixing MORTICE door lock

No. 2

10. Supplying fitting fixing of LGED standard Thai Aluminum Push Door with 5 mm glass 2.13m x1.06m=2.15m2 – 3 nos

Sqm 6.45

11. Supplying fitting and fixing of LGED standard Thai Aluminum window with 5 mm glass

Sqm 25.52

12. Fabricating, fitting & fixing of 3 collapsible gates, 3mm x 25.4mm angle and 19 mm flat bar total 17 m2

Sqm 17

13. Fabricating fitting and fixing of Window grill with 12 mm flat bar as measured of item no11

Sqm 25.52

14. Plastic emulsion paint with using proper sealer mixed with Dr. Fixit solution for proper protection of wall and line putting of 2-3 coats of LGED standard using approved best quality /branded color from authorized local agent of the manufacturer in a sealed container

Sqm 419

15. Scrapping of old mosses & paint. same as item 14

Sqm 419

16. Painting window grill and collapsible gates in two coats with approved best quality synthetic enamel paint

Sqm 45.52

17. Notice Board (12'x4' size) Made with ¾" thick partex board outer frame made with kathal wood

No. 1

18. A celluloid/Crystal sheet Name plate 6’x1.5’ (“Career Guidance and Employment Support Cell”) fitting, fixing in position etc

No. 1

19. Designed melamine / plastic, Door with frame shutter, fitting, fixing in position 1x2'-6"x7'-0") Toilet

No. 2

20. Taking out & Re-fitting door after necessary Repair/cutting work in/c necessary hinge, screws etc.

No. 7

21. Supplying, fitting and fixing gypsum board ceiling of 9 mm thick board laminated by mechanical hot press with a milk white PVC membrane with Aluminum

Sqm 60

22. Supplying, fitting and fixing of wash room with standard commodes, Basin and other necessary fittings

No. 2

23. Supplying, fitting and fixing of 1.37 m x0.6 m Basin cabinet Top will made with Granite, drawer with Plastic board laminating with Color Glass, Standard Sink Tap and other necessary fittings

No. 1

24. Picking-up unserviceable patent stone, situ mosaic from floor, walls, dado etc

Sqm 132

25. Outside Space cleaning & Development with earth excavation sand feeling, Leveling over drain & floor net finishing

M3 8.5

26. Master/weather coat painting to surrounding walls

Sqm 46

B) Electrical Works . 1. Concealed Conduit wiring. i) Light point = 20 Point No. 20 ii) Fan point = 10 Point No. 10 2. Cables manufactured by

BRB/Paradise/Eastern Cable a) ic-2x1.5 sqm (BYM) cable = 600.00 rm

Meter 600

3. Providing & fixing of specified design LED tube light fitting etc. all compt. Lobby

No. 5

4. Providing & fixing ceiling mounted surface type specified design LED tube light supply and fitting etc.

No. 15

5. Providing & fixing fancy single bracket light supply and fitting. C&G

No. 2

6.

Supplying, fitting & fixing, testing, Commissioning of split type (International brand – General/Carrier/Mitsubishi brand) A/C. a) 17000-18000 BTU/HR Capacity.

No. 2

7. TP-MCB, Supply and fitting fixing 50 amps No. 4 8. Prov. fixing 3mm thick ebonite sheet cover. No. 4 9. Gang switch :a) Four gang switch No. 10 b) Gang Type Socket No. 10 c) Gang type Fan regulator. = 10 Nos 10. Supply & fixing of Branded best quality

selling Fan accepted by the principal, PTSC -56"

No. 10

11 Supply & fixing 250 Volt, single phase, 3-pin 15/16 amps combined switch socket outlet concealed type etc.

No. 10

12. Concealed conduit wiring with following PVC included and sheathed standard cable (BYM). Cable manufactured by Eastern Cable/Paradise Cable/BRB Cable. a) ic-2x2.5 sq mm (BYM) cable with 2.5 sqm for Computer

Meter 300

b) ic-2x6 sq mm (BYM) for Computer & A/C

Meter 300

C) Furniture. 1 Three seated Waiting Bench 70”x20”

Stainless steel Handle and frame from Otobi/Hatil/Aktar or accepted any reputed brand (similar or equal to attached picture)

No. 2

2 Tea Table matching with waiting bench 2 no High quality reputed branded

No. 2

3 Waiting Bench, 4 seated, S.S frame /plastic seats fixed in floor, should be durable in using roofless floor ( Otobi/Hatil/Aktar or accepted any reputed brand and similar or equal to attached picture)

No. 4

4 Executive Table (Full seasoned wood made) size (1400x750x750) mm (Otobi /Hatil/Aktar or accepted any reputed brand and similar or equal to attached picture)

No. 1

5 Executive Chair-1 no matched with the Table, (Otobi /Hatil/Aktar or accepted any reputed brand and similar or equal to attached picture)

No. 1

6 Visitors Chair matched with the Table, handle top with wood, (match similar or equal to attached picture)

No. 2

7 Setting of Special workstation 1200 mm x 350 mmx 750 mm for staff with facility of computer desk (Otobi/Hatil/Aktar or accepted any reputed brand)

No. 1

8 Conference Table L- 3m and w-1.5 m h- 0.75 m size. Full season Jack wood (Kathal)/melamine board laminating with 10mm edging and formica made. Folding and part by part is preferable.

No. 1

9 Conference Chair matched with the conference table Otobi/Hatil/Aktar or accepted any reputed brand (similar or equal to attached picture)

No. 15

10 Conference Table guest chair Atoby/Hatil/Aktar or accepted any reputed brand (similar or equal to attached picture) --3 nos

No. 3

11 Conference Room Tablet chair Otobi/Hatil/Aktar or accepted any reputed brand (similar or equal to attached picture) --20 nos

No. 20

12 Career Guidance Desk and shelf attached with the Column wall 860mm x 3048mm x305 mm with required drawer & shelf

No. 1

13 Setting of Special 5 workstation for student’s/ graduate’s/ jobseekers with facility of 5 computer desk.

No. 5

Work place: Panchagarh Technical School & College, Panchagarh. The proposal should be made on paper with a printed letterhead

and delivered to: Cezar Dragutan B-SEP Project ILO Dhaka House # A-9, Road # 127 Gulshan 1, Dhaka-1212

• Proposal/quotation submits along with updated copy of trade license and sample copies of experience in successful completion of similar nature of work.

• Price should be quoted including installation, carrying, and other necessary cost.

• ILO is not liable for any VAT & TAX. • After completion of the works contractor should collect

“successful work completion certificate” from the Principal, Panchagarh Technical School & College, Panchagarh.

• Before submitting the proposal/quotation vendors are hardly requested to visit the Work Place and get clear understand/idea about the nature of renovation work, quality of the materials, Nature of furniture and fixture required upon meeting/discussion with Principal of Panchagarh Technical School & College. Contact no. T & T # 0568 61921, Cell # 01839949090 or OC Career Guidance officer – 01712654311

• All items should be mentioned with proper specifications and warranty for proper evaluation of the proposal.

Submission of the quotation/proposal on or before 22nd February 2016.

Pictures

Picture for item no. 13

Picture for item no. 1

Picture for item no. 3

Picture for item no. 4

Picture for item no. 5

Picture for item no. 6

Picture for item no. 9

Picture for item no. 10

Picture for item no 11