specification sheet / in-grade / l301 · pdf filespecification sheet / in-grade / l301 ......
TRANSCRIPT
Specification Sheet / In-grade / L301
All technical information in this document is subject to change. Copyright © MP Lighting.www.mplighting.com t 1.877.708.1184 f 604.708.1185 03-2018
Code Wattage Color Beam Lens (Option) Angle Bracket* Input Voltage Finish
L301 - -
1 = 1W 2 = 2.5W
S = spot (12°)N = narrow flood (30°)W= wide flood (120°)
C = clearF = frosted
LM = louver, matte anodized
LB = louver, black anodized
HM = hex louver, matte anodized
HB = hex louver, black anodized
0 = no angle 30 = 30° angle45 = 45° angle X = custom (30° max.)
D = DCA = 12V AC*12V AC not available for W41S & 90+CRI
MA = matte clear anodizedBA = black anodizedBZ = bronze anodizedS6 = stainless steel 316
W22S = 2200K, 80+CRIW27S = 2700K, 80+CRIW30S = 3000K, 80+CRIW35S = 3500K, 80+CRIW41S = 4100K, 80+CRIW27H = 2700K, 90+CRIW30H = 3000K, 90+CRIW35H = 3500K, 90+CRI
L301Application: Interior directional in-grade light for lighting walls, columns, architectural features or landscape features. Applicable for mounting into floors, walls, ceilings or other surfaces where a non-obtrusive luminaire is required.
Electrical: 1W, 350mA or 2.5W, 700mA LED.
LED Input Voltage: 4V DC or 12V AC
Power Consumption: 1.5W / 3W
Power Supply: DC - Powered by remote 350mA (1W) or 700mA (2.5W) DC driver. See website for Recommended drivers. Dimmable drivers available (not included). AC - Powered by 12V transformer (not included). Consult factory for dimming option.
Weight: 0.35lbs (0.158kg).
Material: Solid anodized aluminum or stainless steel (316) with 1/4” (6mm) thick tempered glass lens. RoHS compliant
Mounting: Comes with steel flange which mounts to pre-installed standard 4” (102mm) octagonal box, 1-1/2” (38mm) deep minimum and 1/4” (6mm) setback from face of drywall. Can be wall or ceiling mounted.
IP rating: 53
Approval: Dry locations. Approved to US and Canadian standards by CSA.
Emergency Driver options (remote):
MP Lighting Emergency Backup Unit. Input: 100-277V, 50/60Hz / Output: 11-36V, 16W
Bodine Emergency Micro Inventer Input: 120/277V, 50/60Hz / Output: 120/277V, 60Hz, 20W
Type:
Project: Modified: Quantity:
Notes:
Type:
Project:
Modified:
Quantity:
Notes:
L301Application Interior directional in-grade luminaire for lighting walls,
columns, architectural features or landscape features Applicable for mounting into floors, walls, ceilings or other surfaces where a non-obtrusive luminaire is required. Suitable for walk-over applications. For dry location.
IP Rating 40
Mounting Comes with steel flange which mounts to pre-installed standard 4” (102mm) octagonal box, 1-1/2” (38mm) deep minimum and 1/4” (6mm) setback from face of drywall. Can be wall or ceiling mounted.
Electrical Powered by remote dimmable/ non-dimmable driver (sold separately).
*See website for recommended drivers *Remote emergency driver / inverter options available Consult factory.
Power Consumption
1.5 Watt (at 350 mA, 1.0 Watt)
3.0 Watt (at 700 mA, 2.5 Watt)
Light Output 1.0 Watt, 110lm2.5 Watt, 275lm*For photometric data, see page 03
Warranty 5 years limited warrantyEstimated useful life of LED is 50,000 hours.
Material Solid anodized aluminum or marine grade stainless steel (316) with tempered glass lens, RoHS compliant.
Weight 1.8lbs (0.816kg) base extra
Approval
Order Guide
Example: L301-1-W27S-N-C-LM-0-A-S6
DISCLAIMER - When using a control system, consult dimming system manufacturer with minimum load before installing 12V AC transformer. Malfunction and damage to product due to improper dimming system installation or misuse will not be covered under warranty. Only DC Drivers are recommended for dimming systems. Consult MP Lighting for recommended drivers.
*MP Lighting reserves the right, at its sole discretion, at any time and without notice, to make design changes to any of our products.
* Max. 30° angle bracket with louver option.* Max. 20° angle bracket with hex louver option.
Specification Sheet / In-grade / L301
All technical information in this document is subject to change. Copyright © MP Lighting. 03-2018www.mplighting.com t 1.877.708.1184 f 604.708.1185
12° (Spot Beam), Clear lens, Matte clear anodized
12° (Spot Beam), Clear lens, Matte clear anodized
30° (Narrow Flood Beam), Clear lens, Matte clear anodized
30° (Narrow Flood Beam), Clear lens, Matte clear anodized
120° (Wide Flood Beam), Clear lens, Matte clear anodized
120° (Wide Flood Beam), Clear lens, Matte clear anodized
1Watt
2.5Watt
DIMENSION:
LIGHT DISTRIBuTION:
flange
Electrical Box (site supplied)
1-5/8”41mm
3-1/2”89mm
Ø4-1/8”Ø105mm
1-3/4”44mm
7/8”
Ø2-1/2”Ø64mm
Sq.7/8”22mm
Ø1-1/8”Ø29mm
Ø1-7/8”Ø48mm
Ø1-5/8”Ø41mm
1-15/16”49.5mm
Ø2-1/2”Ø62mm
trim 1/8”3.18mm
flange is positioned1/8”(3.17mm) max away
from the surface of dry wall
Specification Sheet / In-grade / L301
All technical information in this document is subject to change. Copyright © MP Lighting. 03-2018www.mplighting.com t 1.877.708.1184 f 604.708.1185
PHOTOMETRIC DATA:
1W, 3000K, Clear lens 2.5W, 3000K, Clear lens
approx. 150 cd max.
0°
180°
90°
45°
135°
-90°
Polar Candela DistributionL2121W, 80+ CRISpot Beam3000K33 lm
1 0.5 0.2
0.1 fc
Mount height: 1 ft Total LLF: 1
2 4 6 8 10 120
0
2
2
4
4
6
Isofootcandle Plot
approx. 243 cd max.
0°
180°
90°
45°
135°
-90°
Polar Candela DistributionL2122.5W, 80+ CRISpot Beam3000K53 lm
1 0.5 0.2
0.1 fc
Mount height: 1 ft Total LLF: 1
2 4 6 8 10 120
0
2
2
4
4
6
Isofootcandle Plot
approx. 114 cd max.
0°
180°
90°
45°
135°
-90°
Polar Candela DistributionL2121W, 80+ CRINarrow Beam3000K33 lm
1 0.5 0.2
0.1 fc
Mount height: 1 ft Total LLF: 1
2 4 6 8 10 120
0
2
2
4
4
6
Isofootcandle Plot
approx. 181 cd max.
0°
180°
90°
45°
135°
-90°
Polar Candela DistributionL2122.5W, 80+ CRINarrow Beam3000K52 lm
1 0.5 0.2
0.1 fc
Mount height: 1 ft Total LLF: 1
2 4 6 8 10 120
0
2
2
4
4
6
Isofootcandle Plot
approx. 26 cd max.
0°
180°
90°
45°
135°
-90°
Polar Candela DistributionL2121W, 80+ CRIWide Beam3000K29.2 lm
1 0.50.2
0.1 fc
Mount height: 1 ft Total LLF: 1
2 4 6 8 10 120
0
2
2
4
4
6
Isofootcandle Plot
0°
180°
90°
45°
135°
-90°
approx. 42 cd max.
Polar Candela DistributionL2122.5W, 80+ CRIWide Beam3000K47 lm
1 0.50.2
0.1 fc
Mount height: 1 ft Total LLF: 1
2 4 6 8 10 120
0
2
2
4
4
6
Isofootcandle Plot
Lumen: 33lm, Spot beam (12°) Lumen: 53lm, Spot beam (12°)
Lumen: 33lm, Narrow flood beam (30°) Lumen: 53lm, Narrow flood beam (30°)
Lumen: 29lm, Wide flood beam (120°) Lumen: 47m, Wide flood beam (120°)
Polar Candela Distribution Polar Candela DistributionIlluminance at a Distance Illuminance at a Distance