specifications - acclaim lighting · lighting specification sheet 2.3.6 flex tube se sc is a side...
TRANSCRIPT
SPECIFICATIONS
Color Temperature 2700K, 3000K, 3500K, 4000K, Red (83.33mm module), Green, Blue
Spool Length + Cut Points 32’ (10m), Cut points every 2.18“ (55.56mm)
Beam Angle 160º
Max Fixture Runs 32’ (10m) - 1 spool maximum
Photometrics 171 Lumens per foot, 54 center beam candlepower (3500K), >80 CRI
Dimming Protocol DMX-512, 0-10V (Sink & Source) or DALI
Mounting via Self lock mounting channel
Power Consumption 106W @ 32‘ (1 Spool), minimum 3.3W per foot
Operating Voltage 24VDC
Lumen Maintenance L70 @ 50,000 Hours (25º C)
Housing & Finish White UV coated, flexible PVC jacket with silicone top
Installation Temperature 32°F to 113°F (-0°C to 45°C)
Operating Temperature -40°F to 131°F (-40°C to 55°C)
IP / IK Rating IP68/IP67† - Wet Location / Submersible*, IK 08 - Up 5 Joule Impact Energy Protection
Fixture Connectors 10‘ (3m) Attached injection molded feed cable - rear, side or end feed options (see page 2)
Warranty 3 Years standard, 5 Years optional (additional charge)
Weight 8 lbs (3.62 kg)
Dimensions W 0.72” x H 0.72” x L 32’ (18.5mm x 16mm x 10m)
Certifications
ACCLAIMLIGHTING
Specification Sheet 2.3.6www.acclaimlighting.com
Flex Tube SE SC is a side emitting, outdoor rated flexible LED tube. It is available in multiple color temperatures of white, as well assingle red, green, and blue versions. It features an IP68 rating, cut points every 2.18”, and a minimum bend radius of 11.8” (300mm). Sold in spools of 32’ (10m), it is impact, UV, and saltwater resistant.
Client:
Project:
Type:
Order Code:
Quantity:
FLEX TUBE SE SC ™
*UL approval limits submersible installation to non-human occupied and freshwater locations only. All cables must be landed in environmentally suitable junction boxes.† If non-injection molded feed cables or end caps are used, the rating drops from IP68 to IP67
ACCLAIMLIGHTING
Specification Sheet 2.3.6www.acclaimlighting.com
Mod
el
Cont
rol
Hous
ing
Colo
rFe
ed C
able
Con
fig
Leng
thBe
amCo
lor
Inpu
t vol
tage
Color: A = 2700K*B = 3000KD = 3500K*E = 4000KN = Red* - (83.33mm module)P = Green*Q = Blue*
Length: A = 32‘ (10m)X = Custom*†
Beam: A = 160°
Feed Cable: 4 = Side Feed*5 = Rear Feed6 = End Feed*
Housing Color: 2 = White
Control: 1 = Standard SCOn/Off or DMX
ORDER CODES * I n d i c a t e s S p e c i a l O r d e r
FTU - 1 2 # - A A # N Input Voltage: N = 24VDC
FTU-124-####, Side Feed FTU-126-####, End FeedFTU-125-####, Rear Feed
FLEX TUBE SE SC ™
*UL approval limits submersible installation to non-human occupied and freshwater locations only. All cables must be landed in environmentally suitable junction boxes.
† : When ordering custom lengths, please specify number of 2.18” (55.56mm) sections required after X (32.8’, 10m maximum).Example order code: FTU-125-X18ABN = 55.56mm x 18 / 1m spool
ACCLAIMLIGHTING
Specification Sheet 2.3.6 www.acclaimlighting.com
Self Lock Mounting Channels
Wiring Accessories
FTUFC2Flex Tube SE SC feed cable kit10’ (3m)
FTSEEC2Flex Tube SE end cap
RELATED COMPONENTS
Power Supplies (Non-dim or with DMX)
APS-240-242 Spools Maximum240W, 24VDC, Dry location, DIN Rail Mount115-230VAC (47-63Hz) Input
APS-480-244 Spools Maximum480W, 24VDC, Dry location, DIN Rail Mount115-230VAC (47-63Hz) Input
DMX Driver AL Driver 1
ALD001AL Driver 1, 1 Spool Max.Single channel DMX or 0-10V (sink & source) driverUse in conjunction with APS Series
FTTK2Flex Tube Install KitIncludes cutter and insert assists
FLEX TUBE SE SC ™
If non-injection molded feed cables or end caps are used, the rating drops from IP68 to IP67
FTSECH2000Flex Tube SE self lock mounting channel6.56‘ (2m)
FTSECH1000Flex Tube SE self lock mounting channel3.28‘ (1m)
FTSECH35Flex Tube SE self lock mounting channel1.37” (35mm)
ALD-800-24AL Driver 800 24V, 6 spools max800W 24V power supply + DMX, 0-10V (sink & source) & DALI driver10 output ports, 100-277VAC input
ALD-400-24AL Driver 400 24V, 3 spools max400W 24V power supply + DMX, 0-10V (sink & source) & DALI driver6 output ports, 100-277VAC input
ALD-200-24AL Driver 200 24V, 1 spool max200W 24V power supply DMX, 0-10V (sink & source) & DALI driver4 output ports, 100-277VAC input
DMX Drivers AL Driver 200/400/800
ACCLAIMLIGHTING
PHOTOMETRICS
Total Lumens
Specification Sheet 2.3.6www.acclaimlighting.com
3000K
For additional color data and IES files, please visit acclaimlighting.com
CRI
Ra: 79.9R9: 10.6
149.9
Center Beam Candlepower
47
Total Lumens
3500K
CRI
Ra: 80.8R9: -0.7
171.1
Center Beam Candlepower
54
Total Lumens
4000K
CRI
Ra: 83.4R9: 13.6
133.9
Center Beam Candlepower
42
FLEX TUBE SE SC ™
ACCLAIMLIGHTING
Specification Sheet 2.3.6 www.acclaimlighting.com
Wire size guide
Gauge Cond. Max feet to flex
18 AWG 2 40
14 AWG 2 100
12 AWG 2 180
WIRING
Flex Tube SE SC connections
Non-dimUp to four10 meter Flex Tube SE SC spools can be run from a single APS-480-24 power supply unit.
Link cables require 2 cores.
Mains input (115-230VAC
47-63Hz)
APS-480-24 power supply
unit
DMX & 0-10V dimming controlUp to six 10 meter Flex Tube SE SC spools can be run from a single AL Driver 800 unit.
Link cables require 2 cores. .
DMX input
AL Driver 800 unit
Up to 60 meters
of Flex Tube SE SC can be driven across
the ten channels.
Ensure that no more than 10 meters is placed on any one output.
FLEX TUBE SE SC ™