PZL (PZ-11) Tiplex Drilling Mud Pump

Maximum Input

Maximum RPM

Stroke Length

Piston Load

Pump Weight

Gear Ratio

SPECIFICATIONS

1,600 BHP (1,193 kw)

115 RPM

11 in. (279 mm)

150,300 lbs. (668,568 N)

37,000 lbs. (16,815 kg)

4.38 :1

PISTON CYLINDER DISPLACEMENT – DRILLING SERVICEMAXIMUM PSI

PUMPRPM

JACKSHAFTRPMDIAMETER PER REVOLUTION MAXIMUM FLOW RATE

inch mm gallon liters GPM LPM PSI bar

8 203 7.18 27.18 826 3126 2989 206

115 504

7.5 191 6.31 23.89 726 2747 3401 2347.25 184 5.90 22.32 678 2567 3639 251

7 178 5.50 20.81 632 2393 3904 2696.5 165 4.74 17.94 545 2064 4527 3126.25 159 4.38 16.59 504 1908 4897 338

6 152 4.04 15.29 465 1758 5000 3455.5 140 3.39 12.85 390 1478 5000 3455 127 2.80 10.62 323 1221 5000 345

Ratings shown are for 5,000 PSI Fluid End Cylinder. For 7,500 PS Fluid End Cylinder, visit www.gardnerdenverpumps.com

Weight: Complete pump with large steel skid - 41,400 pounds.

Ratings are based on 90% mechanical ef� ciency and 100% volumetric ef� ciency.

CONNECT WITH US:

www.gardnerdenverpumps.com 1-866-GDPumps facebook/GardnerDenverPumps GardnerDenverPumpsTV @GDPumps #pumpingperfected

PZL (PZ-11) Tiplex Drilling Mud Pump

SPECIFICATIONS

OPTIONAL FEATURES

• High strength, cast nodular iron power frame, eccentric, connecting rods, and crossheads

• Full roller bearing construction at eccentric mains, jackshift, connecting rods, and crosshead pins

• Heat treated alloy steel, double helical AGMA drive gears

• Double extended jackshift for mounting sheaves or sprockets

• Replaceable bronze crosshead slides

• Heat treated alloy steel, valve over valve, interchangeable fl uid end modules

• Hyrdrostatic tested cast steel discharge manifold

• API suction and discharge connections

• Steel transportation and placement skid for pump only or larger maintenance skid with non-slipping deck

• Centrifugal suction charging pump

• Suction stabilizer and/or discharge damper

• External electric powered lube pump

• Fabricated, log style suction manifold

• Full open valve seats

• Custom packaging available

STANDARD FEATURES

1

A

B

D

E

F

C

A

B

C

D

E

F

A

B

C

D

E

F

A

B

C

D

E

F

A

B

C

D

E

F

2346 578

3 28 457 6 1

D

CUTSHEET

PZ11

PZ11 ATAS

XXX

4/21/2014

1 1

125

TAP DRILL DEPTHS ARE MAXIMUMTHREAD DEPTHS ARE MINIMUMFINISH OF CHAMFERS & FILLETS TO CONFORM TO ROUGHEST ADJACENT AREA

UNLESS OTHERWISE SPECIFIED:DECIMAL .X = ±.05TOLERANCES .XX = ±.02 .XXX AS SPECIFIEDANGULARITY: ± 0°-30'CONCENTRICITY: Ø.015 AS DRAWN MAX ON ALL MACHINED SURFACES

DIMENSIONS ARE IN INCHES

DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994SURFACE ROUGHNESS MEASURED PER ASME B46.1

N/A

BREAK ALL SHARP EDGES .005-.015

THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTYOF GARDNER DENVER, INC. IT ISNOT FOR PUBLIC DISCLOSURE. POSSESSION OF THE INFORMATIONDOES NOT CONVEY ANY RIGHT TO LOAN, SELL OR DISCLOSE THE INFORMATION. UNAUTHORIZED REPRODUCTION OR USE OF THE INFORMATION IS PROHIBITED. THIS DOCUMENT IS TO BE RETURNED TO GARDNER DENVER, INC. UPON THE COMPLETION OF THE PURPOSE FOR WHICH IT IS LOANED OR UPON REQUEST. Tulsa, OK

THIRD ANGLE PROJECTION

APPROXIMATE WEIGHT

CHK BY

DWN BY

TITLE

SIZE

SHEETSCALE: TO FIT

REVDWG NO.

OF

CONFIDENTIAL:

REVISIONSZONE REV DESCRIPTION DATE DWN CHK A NEW RELEASE PER ECN

104.00

66.18

157.05

1

A

B

D

E

F

C

A

B

C

D

E

F

A

B

C

D

E

F

A

B

C

D

E

F

A

B

C

D

E

F

2346 578

3 28 457 6 1

D

CUTSHEET

PZ11

PZ11 ATAS

XXX

4/21/2014

1 1

125

TAP DRILL DEPTHS ARE MAXIMUMTHREAD DEPTHS ARE MINIMUMFINISH OF CHAMFERS & FILLETS TO CONFORM TO ROUGHEST ADJACENT AREA

UNLESS OTHERWISE SPECIFIED:DECIMAL .X = ±.05TOLERANCES .XX = ±.02 .XXX AS SPECIFIEDANGULARITY: ± 0°-30'CONCENTRICITY: Ø.015 AS DRAWN MAX ON ALL MACHINED SURFACES

DIMENSIONS ARE IN INCHES

DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994SURFACE ROUGHNESS MEASURED PER ASME B46.1

N/A

BREAK ALL SHARP EDGES .005-.015

THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTYOF GARDNER DENVER, INC. IT ISNOT FOR PUBLIC DISCLOSURE. POSSESSION OF THE INFORMATIONDOES NOT CONVEY ANY RIGHT TO LOAN, SELL OR DISCLOSE THE INFORMATION. UNAUTHORIZED REPRODUCTION OR USE OF THE INFORMATION IS PROHIBITED. THIS DOCUMENT IS TO BE RETURNED TO GARDNER DENVER, INC. UPON THE COMPLETION OF THE PURPOSE FOR WHICH IT IS LOANED OR UPON REQUEST. Tulsa, OK

THIRD ANGLE PROJECTION

APPROXIMATE WEIGHT

CHK BY

DWN BY

TITLE

SIZE

SHEETSCALE: TO FIT

REVDWG NO.

OF

CONFIDENTIAL:

REVISIONSZONE REV DESCRIPTION DATE DWN CHK A NEW RELEASE PER ECN

104.00

66.18

157.05