Anabelle™Single-Handle Single-Hole Mount

High Arc Kitchen Faucetwith Side Spray

Models: 87650 series with spray

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 2 HOLES:A 1-1/2" (38MM) MIN. DIA. HOLE FOR VALVE AND A 1-1/4" (32MM)MIN. DIA. HOLE FOR SIDE SPRAY. HOLES ON 4" OR 8" CENTERS.

FAUCET DESCRIPTION• Metal construction with various finishes identified by suffix • High arc spout provides the height and reach to fill or clean large pots • Mounts with or without deck plate• Flexible supply lines with 3/8" compression fittings • 360˚ rotating spout• With side spray• Duralock™ Quick Connect InstallationOPERATION• Single handle lever • Temperature controlled by 100˚ arc of handle travelFLOW • Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi • Operates in eco-performance mode by default in aerated and spray streamCARTRIDGE • 1255™ Duralast™ cartridge for Single-Handle Faucets• Engineered polymers, non-ferrous and stainless steel materialsSTANDARDS • Third party certified to IAPMO Green, ASME A112.18.1/CSA B-125.1

and all applicable requirements referenced therein including NSF 61 & 372• Meets CalGreen and Georgia SB370 requirements• Contains no more than 0.25% weighted average lead content • Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

• ADA for lever handle

WARRANTY• Lifetime limited warranty against leaks, drips and finish defects

to the original consumer purchaser • 5 year warranty if used in commercial installations

5-1/2"(140mm)

6-1/2"(165mm)

1/2"(13mm)

10-1/4" x 2-3/8"(260mm x 60mm)

ESCUTCHEON

2-3/16"(56mm) 2-1/2" (63mm)

MAX DECKTHICKNESS

10-7/8"(276mm)

8-1/8"(206mm)

15-3/4"(400mm)

2"(51mm)

4-3/4"(121mm)

29-1/2"(750mm)

2-5/16"(58mm)

1-1/4" (32mm)THRU HOLE

1-1/2" (38mm)THRU HOLE

CRITICAL DIMENSIONS(DO NOT SCALE)

S p e c ­i ­f i ­c a ­t i o n s

FOR MORE INFORMATION CALL: 1-800-BUY-MOENwww.moen.com

Order by Part Number

There is more than 1 version of this model.Page down to identify the version you have.

Rev. 6/15

Anabelle™Single-Handle Single-Hole Mount

High Arc Kitchen Faucetwith Side Spray

Models: 87650 series with spray

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 2 HOLES:A 1-1/2" (38MM) MIN. DIA. HOLE FOR VALVE AND A 1-1/4" (32MM)MIN. DIA. HOLE FOR SIDE SPRAY. HOLES ON 4" OR 8" CENTERS.

FAUCET DESCRIPTION • Metal construction with various finishes identified by suffix • High arc spout provides the height and reach to fill or clean large pots • Mounts with or without deck plate• Flexible supply lines with 3/8" compression fittings • 360˚ rotating spout• Includes traditional side spray and quick connect systemOPERATION • Single handle lever • Temperature controlled by 100˚ arc of handle travelFLOW • Aerator is limited to 1.5 gpm max (5.7 L/min)CARTRIDGE • 1255™ Duralast™ cartridgeSTANDARDS • Third party certified to ASME A112.18.1/CSA B125.1 and all applicable

requirements referenced therein including NSF 61/9• Contains no more than 0.25% weighted average lead content • Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

• ADA for lever handle

WARRANTY• Lifetime limited warranty against leaks, drips and finish defects

to the original consumer purchaser • 5 year warranty if used in commercial installations

Rev. 6/15

5-1/2"(140mm)

6-1/2"(165mm)

1/2"(13mm)

10-1/4" x 2-3/8"(260mm x 60mm)

ESCUTCHEON

2-3/16"(56mm) 2-1/2" (63mm)

MAX DECKTHICKNESS

10-7/8"(276mm)

8-1/8"(206mm)

15-3/4"(400mm)

2"(51mm)

4-3/4"(121mm)

29-1/2"(750mm)

2-5/16"(58mm)

1-1/4" (32mm)THRU HOLE

1-1/2" (38mm)THRU HOLE

CRITICAL DIMENSIONS(DO NOT SCALE)

S p e c ­i ­f i ­c a ­t i o n s

FOR MORE INFORMATION CALL: 1-800-BUY-MOENwww.moen.com