specifications - moen | bathroom & kitchen faucets, shower ... · specifications faucet...

Specifications FAUCET DESCRIPTION • Metal construction with various finishes identified by suffix • Includes showerhead, arm, flange and diverter spout OPERATION • Lever style handle with temperature indicator on the escutcheon, pull-on/push- off operation • Temperature operates through an 180° arc of handle travel (full cold to full hot) • Adjustable temperature limit stop to control maximum hot water temperature • Pressure balancing mechanism maintains selected discharge temperature to ± 2° FLOW • Showerhead limited to 2.5 gpm (9.5 L/min) • NH Suffix models contain no showerhead CARTRIDGE • 1225® cartridge design • Nonmetallic/nonferrous and stainless steel materials • Accommodates back to back installations STANDARDS • Third party certified to ASME A112.18.1/CSA B-125-1, and all applicable requirements referenced therein • ADA for lever handle WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original homeowner • 10 year limited warranty when used in a multifamily installation • 5 year limited warranty when used in a commercial installation Visit www.moen.com/support for complete details and limitations VOSS™ MOENTROL® Single-Handle Tub/Shower Trim Only Models: T3691 series - valve trim only T3692 series - shower trim only T3693 series - tub/shower trim Valves: 63100, 3500 Series FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com CRITICAL DIMENSIONS (DO NOT SCALE) THIN WALL APPLICATION THICK WALL APPLICATION 4/19 HOT INLET COLD INLET 2" CC (51mm) 1-7/8" IPS (48mm) MAX WALL FINISHED WALL LINE FACE OF STUD 5-1/2" (140mm) WALL OPENING FLOOR 45" (1143mm)/ 48" (1219mm)-SHOWER 32" (813mm)-TUB OR TUB SHOWER 7-1/2" (191mm) MIN TUB RIM 6'-6" (1981mm) L C 1-3/4" (44mm) 2-1/2" MAX. (63mm) 1/2" MIN. CC (13mm) 5/8" MIN. IPS (16mm) FLOOR 1-3/4" (44mm) 1-1/2" (38mm) 3/16" (typ) (5mm) PLASTER GROUND 3-1/2" (89mm) MAX. 2-1/4" (57mm) MIN. DIAMETER WALL OPENING PLASTIC TUB/SHOWER SURROUND L C 6-1/16" (154mm) 7-1/4" (184mm) 3-3/16" (81mm) 7-15/16" (202mm) 8" (203mm) 5-3/4" (146mm) M•pact™ System

Upload: duonghanh

Post on 02-Apr-2019

226 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Specifications

FAUCET DESCRIPTION• Metal construction with various finishes identified by suffix• Includes showerhead, arm, flange and diverter spoutOPERATION• Lever style handle with temperature indicator on the escutcheon, pull-on/push-

off operation• Temperature operates through an 180° arc of handle travel (full cold to full hot)• Adjustable temperature limit stop to control maximum hot water temperature• Pressure balancing mechanism maintains selected discharge temperature to ± 2°FLOW• Showerhead limited to 2.5 gpm (9.5 L/min)• NH Suffix models contain no showerheadCARTRIDGE• 1225® cartridge design• Nonmetallic/nonferrous and stainless steel materials• Accommodates back to back installationsSTANDARDS• Third party certified to ASME A112.18.1/CSA B-125-1, and all applicable

requirements referenced therein • ADA for lever handleWARRANTY• Lifetime limited warranty against leaks, drips and finish defects to the original

homeowner• 10 year limited warranty when used in a multifamily installation• 5 year limited warranty when used in a commercial installationVisit www.moen.com/support for complete details and limitations

VOSS™ MOENTROL®Single-Handle Tub/Shower

Trim Only

Models: T3691 series - valve trim only T3692 series - shower trim only T3693 series - tub/shower trim

Valves: 63100, 3500 Series

FOR MORE INFORMATION CALL: 1-800-BUY-MOENwww.moen.com

CRITICAL DIMENSIONS(DO NOT SCALE)

THIN WALL APPLICATIONTHICK WALL APPLICATION

4/19

HOTINLET

COLDINLET

2" CC (51mm) 1-7/8" IPS (48mm)

MAX WALLFINISHED WALL LINE