specifications swc 106 event number: 32110-5898 interior ... 106 interior exterior... ·...

ITB 32110-5898 Interior and Exterior Signage of 3

Specifications SWC 106 Event Number: 32110-5898 Interior and Exterior Signage 1. Vendor shall manufacture, deliver, and install interior signs in state-owned buildings. The project shall include signage for one hundred and sixty (160) buildings across the State of Tennessee over the next five (5) years. Table A provides the name of each sign requested by the State. For more details of this project refer to the attachment labeled “State of Tennessee Interior Signage.”

TABLE A 1 Workstation Sign – Large including panel clip 2 Workstation Sign – Small including panel clip 3 Small Informational Sign 4 Office / Room / Support Space sign 5 Department ID Sign including panel clip 6 Conference Room Sign 7 Large Restroom Sign 8 Standard Restroom Sign-Male 9 Standard Restroom Sign-Male with Disabled Access

10 Standard Restroom Sign-Female 11 Standard Restroom Sign-Female with Disabled Access 12 Exterior Stair Identification Sign 13 Evacuation Map Sign 14 Small Directory / Directional Sign 15 Large Directory Sign 16 Stairwell Sign 17 Sign – Workstation Large with silk-screened rule line and number including panel clip 18 Lens only with silk-screened rule line and number


2. As a requirement of the contract, on or before December 16, the vendor shall supply the initial order of signs and quantities requested to the William R. Snodgrass Tennessee Tower. Table B provides more detail on the quantities associated with the initial order. The initial order shall reflect how the State intends to procure signage throughout the term of the contract.

TABLE B

Initial Order for the Tennessee Tower (Order Encompasses 5 floors)

Sign Type Floor

Total 12 18 19 20 21

Workstation Sign – Large including panel clip 89 68 81 65 71 374 Workstation Sign – Small including panel clip 0 0 0 0 0 0 Small Informational Sign 2 2 2 2 2 10 Office / Room / Support Space sign 23 27 25 33 31 139 Department ID Sign 4 5 1 6 1 17 Conference Room Sign 2 4 2 2 2 12 Large Restroom Sign 1 1 1 1 1 5 Standard Restroom Sign-Male 1 1 1 1 1 5 Standard Restroom Sign-Male with Disabled Access 0 0 0 0 0 0 Standard Restroom Sign-Female 1 1 1 1 1 5 Standard Restroom Sign-Female with Disabled Access 0 0 0 0 0 0 Exterior Stair Identification Sign 2 2 2 2 2 10 Evacuation Map Sign 4 4 4 4 4 20 Small Directory / Directional Sign 8 7 8 8 8 39 Large Directory Sign 2 2 2 2 2 10 Stairwell Sign 2 2 2 2 2 10 3. The evaluation factors below (Table C) represent a breakdown of our best estimate as to what will be procured over the first seven (7) months of this contract.

TABLE C Sign Type Quantity Estimates

Sign Type

Properties Total

10% Contigency

Grand Total TN TOWER

Andrew Johnson

2700 Middle Brook Pike

Pellissippi Community College

665 Mainstream Drive

Andrew Jackson

220 French Landing

Workstation Sign – Large including panel clip

1984 900 296 345 306 1200 560 5591 559 6150

Workstation Sign – Small including 0 0 0 0 0 0 0 0 0 0


panel clip Office / Room / Support Space sign 994 432 60 135 120 432 112 2285 229 2514

Department ID Sign 105 48 10 24 16 64 32 299 30 329

Conference Room Sign 103 60 4 12 10 64 16 269 27 296

Large Restroom Sign 28 12 0 3 2 0 0 45 5 50

Standard Restroom Sign-Male 30 12 0 3 2 16 0 63 6 69

Standard Restroom Sign-Male with Disabled Access

30 12 0 3 2 16 0 63 6 69

Standard Restroom Sign-Female 2 0 4 0 8 0 4 18 2 20

Standard Restroom Sign-Female with Disabled Access

2 0 4 0 8 0 4 18 2 20

Exterior Stair Identification Sign 66 24 6 3 8 32 12 151 15 166

Evacuation Map Sign 132 48 12 12 16 64 24 308 31 339

Small Directory / Directional Sign 253 48 16 24 24 64 32 461 46 507

Large Directory Sign 62 24 6 6 8 32 12 150 15 165

Stairwell Sign 66 24 6 3 8 32 12 151 15 166 4. The Contractor shall be compensated for a “Trip Charge” on a per order basis only. 5. The “Trip Charge” will be waived for installations in Davidson County, TN and Shelby County, TN. 6. Each shipment delivered to the State shall be accompanied with detailed installation instructions on how to install the products. 7. The use of contractor installation services shall be at the sole discretion of the Project Manager for the State of Tennessee. 8. On occasion, the State may request work to be performed outside of normal state business hours, in which case there shall be no additional charge. 9. All printed graphics shall be provided by the State 10. The Project Manager for the State shall have final approval of all project installs. 11. Installer hourly rate starts at the time of installer sign-in on State install location.

State of Tennessee Interior Signage

1

NON-ILLUMINATED INTERIOR SIGNAGE

PART 1 - GENERAL 1.01 SUMMARY A. Section includes: Interior non-illuminated directional, control, and informational signage as complete

integrated modular system. 1.02 REFERENCES A. Standards of the following as referenced: 1. American National Standards Institute (ANSI). B. Industry standards: 1. Department of Justice, Office of the Attorney General, "Americans with Disabilities Act", Public

Law 101-336, (ADA). 2. ANSI A117.1: Providing Accessibility and Usability for Physically Handicap People. 3. Federal Register Part III, Department of Justice, Office of the Attorney General, 28 CFR Part 36:

Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities,

4. Federal Register Part II, Architectural and Transportation Barriers Compliance Board, 36 CFR Part 1191: Americans with Disabilities Act (ADA) Accessibility Guidelines for Buildings and Facilities; Amendment to Final Guidelines.

5. Comply with all federal, state & local codes. 1.03 DEFINITIONS A. Terms: 1. Braille: Grade 2 Braille including 189 part-word or whole word contractions in addition to Grade

1 Braille 63 characters. Tactile is required whenever braille is required; see SYSTEM DESCRIPTION Article below.

2. Non-tactile: Letters and numbers on signs. Use typestyles with medium weight; upper and lower case lettering is permitted; serif typestyles are permitted. See SYSTEM DESCRIPTION Article below.

3. Symbols: Symbol itself is not required to be tactile but equivalent verbal description is required both in tactile letters and braille.

4. Tactile: 1/32" raised capital letters without serifs at least 5/8" height and not more than 2" height based on upper case "X". Braille is required whenever tactile is required; see SYSTEM DESCRIPTION Article below.

1.04 SYSTEM DESCRIPTION A. Signage under this section is intended to include items for identification, direction, control, and

information of building where installed as complete integrated system from a single manufacturer. B. ADA design requirements: 1. Signage requiring tactile graphics: a. Wall mounted signs designating permanent rooms and spaces such as room numbers and

restroom, department, office, and exit identifications. b. Individually applied characters are prohibited. 2. Signage not requiring tactile graphics but require compliance to other ADA requirements: All

other signs providing direction to or information about function of space such as, directional signs (signs with arrow), informational signs (operating hours, policies, etc.), regulatory signs (no smoking, do not enter), and ceiling and projected wall mount signs.


2

3. Excluded signage: a. Exterior signs. b. Building directories. c. Menus. d. Temporary signs include personnel signs and tenant identification; suite numbers are not

considered temporary. C. ADA performance requirements: 1. Tactile graphics signs mounting requirements: a. Comply with federal, state & local codes and ADA requirements. 1.05 SUBMITTALS A. Product data: 1. Manufacturer's product literature indicating units and designs selected. 2. Evidence of manufacturer's computerized data program for tracking of Project for sign

typography, message strip requirements and other pertinent data from schedule input to final computerized typography on finished product.

B. Shop drawings: 1. Indicate materials, sizes, configurations, and applicable substrate mountings. 2. Typography sample for ADA bands copy. C. Signage schedule complete with location of each sign and required copy; include floor plans, if

required. D. Sign Message List 1. Unless provided by the project coordinator, sign company to develop a Sign Message List

including: sign location number, sign type, and sign message / copy. 2. Unless provided by the project coordinator, sign company to develop a sign location plan using

architect’s floor plan; sign location plan to include sign location number to correspond with sign message list.

E. Samples: 1. Full size sample for frame/holder and clear lens with ADA band in color specified. Sample will

not be returned for use in Project. Provide a sample of sign type: OS1 (Dwg. ST-201) F. Contract close out: 1. Furnish:

a. Checklist for aiding in reordering after Date of Substantial Completion. Maintain computer schedule program for five years for ordering new signage required by Owner.

b. Maintenance data and cleaning requirements for exterior surfaces. c. PC / Windows compatible Software program providing Customer with ability to easily create

laser-printed messages in-house for each sign type d. Sign type Drawings e. Sign Message List f. Sign Location Plans g. All of the above in hard copy & electronic files on CD.

1.06 QUALITY ASSURANCE A. Qualifications: 1. Manufacturer:

a. Work required under this section from manufacturers regularly engaged in work of this magnitude and scope for minimum of five years.

b. Maintain computer link between schedule input and computerized typography production. 2. Installer: Trained and authorized by manufacturer for installations of required scope and product.


3

1.07 DELIVERY, STORAGE, AND HANDLING

A. Package signs to prevent damage during shipment, handling, storage and installation. Products are to remain in their original packaging (unless otherwise specified) until removal is necessary for installation.

B. If installation site is not ready for signage upon delivery, store signs in a dry, air-conditioned environment.

C. Handle signage in accordance with manufacturer’s instructions. D. Store and dispose of solvent-based materials, and materials used with solvent-based materials, in

accordance with requirements of local authorities having jurisdiction. 1.08 SEQUENCING AND SCHEDULING

A. Schedule system installations after related finishes have been completed. 1.09 WARRANTY

A. Provide manufacturer’s warranty against defects in material and workmanship for a minimum period of one (1) year. During this period, any defective product shall be replaced without charge.

B. Also provide a statement regarding the duration of time that replacement parts or duplicate signs can be obtained.

PART 2 - PRODUCTS 2.01 MANUFACTURED UNITS

A. Acceptable manufacturer: APCO; 388 Grant Street SE, Atlanta, Georgia, 30312, USA. Phone; (404) 688-9000. Fax; (404) 577-3847, Arcadia Series 1000 Curved Face Sign System, or equivalent version to meet specs.

2.02 SYSTEM REQUIREMENTS

A. General: 1. Sign system shall feature solutions for all required sign types, including but not limited to, wall

mounted personnel signs, workstation personnel signs, primary room identification, directories, directional, restroom signs, regulatory and information signs, stair signs and conference room signs.

2. Signs within the system shall feature the same family of components and convey a uniform look throughout.

B. Features:

1. Updatability: Signs shall allow for easy updating of message inserts without the need to replace the entire sign assembly. System shall offer a solution for easy in-house creation of laser printed sign inserts for all applicable sign types, including personnel signs, directories and directional signs.

C. Graphics and Typography: Reference sign drawings.

1. Note that ALL laser-printed graphics will be provided by the Customer. Sign manufacturer will provide silk-screened and ADA graphic inserts/panels where applicable.

D. Colors and Finishes: Reference sign drawings.


4

E. ADA Compliance: Sign system shall comply with all current and applicable ADA regulations, including requirements regarding which sign types require Braille/tactile features, character heights, color contrast and installation locations and mounting heights within the facility.

F. Materials and Construction:

1. Frames/Holders: Curved face sign frames shall be constructed of extruded aluminum, alloy 6063-T6, with minimum 3/4 inch (19 mm) wide contour edge detail. Top/bottom caps shall be aluminum. Plastic caps will not be acceptable. Aluminum extrusions shall contain a minimum of 50% post consumer recycled content and shall be extruded in the USA. Modular sign holders shall accommodate any type of flexible insert material up to .095 inch (2.4 mm) thick.

2. Braille / Tactile Components: PETG-backed photopolymer with raised characters and Braille of minimum 1/32 inch (0.8 mm) depth/thickness. Braille/tactile plaques shall contain a minimum of 40% recycled content.

3. Fasteners: Signs shall be able to accommodate fully concealed mechanical fasteners. 2.03 COMPONENTS

A. Holder: Curved Face Sign surface: aluminum extruded plaque 1. Graphic area widths:

a. 150mm / 5 7/8” (frame outer dimensions: 7.5”w x .725”deep) b. 215mm / 8.5” (frame outer dimensions: 10.188”w x 1.095”d) c. 280mm / 11” (frame outer dimensions: 13”w x 1.188”d) d. 430mm / 17” (frame outer dimensions: 18.812” w x 1.312”d)

2. Color:

a. Natural Satin anodized finish. b. Painted finish not allowed.

3. End Caps: Full coverage metal caps (.040”) aluminum.

a. Finish: Natural Satin anodized finish. b. Painted finish not allowed.

4. Mounting:

a. Wall Mounting: Vinyl Tape, or Vinyl Tape plus Mechanical Fastener depending on wall surface and weight of sign. For signs 17” tall and taller, use mechanical fasteners and vinyl tape.

b. Panel Clip: For all workstation signs and some small directories/directional signs and Department ID signs, use .040” Natural Satin anodized formed aluminum panel clip mounting. See drawings for details.

c. Glass Mounting: If sign is installed on glass, apply opaque silver vinyl film cut to same size and shape as sign applied on first surface of glass, and install sign onto vinyl film using vinyl tape.

B. Inserts:

1. Sizes in height: as detailed in sign type drawings.

2. Insert Types: a. Opaque Insert: non-tactile, 1st surface painted, changeable / removable from frame.

1. Graphics – Silk screen printed, 1st surface. (Vinyl graphics or applied letters Not allowed.)

b. ADA Insert: tactile, raised letters & Braille, photopolymer 1. Graphics – Silk screen printed, 1st surface – tipped ink on raised letters/numbers.

Braille – non-tipped / same color as ADA insert background finish. 2. Applied characters to simulate raised letters & Braille are Not allowed.

c. Clear Lens Insert – Matte 0.040” thick clear insert for frame graphic areas of 11”wide or less. Matte 0.060” thick clear insert for frame graphic areas 17”wide or wider.

d. Paper Insert - If required, heavy cardstock paper insert, approx 170gsm / 60 pound weight.


5

C. Graphics: 1. Type sizes: as detailed in sign type drawings. 2. Type style or styles: as detailed in sign type drawings. 3. Type code or codes: as detailed in sign type drawings. 4. Imprint colors: as detailed in sign type drawings. NOTE that all laser printed graphics to be provided by the Customer. 2.04 FABRICATION A. Shop assembly: 1. Fabricate units to configurations indicated on reviewed shop drawings. 2. Provide copy on inserts, and covers required on reviewed shop drawings and in accord with ADA

requirements. 4. Wrap each individual unit with polyethylene; include instruction sheets for removal and

replacement inserts and installation. PART 3 - EXECUTION 3.01 EXAMINATION A. Verification of conditions: 1. Examine areas to receive signage; notify project coordinator in writing of unacceptable substrate. 2. Do not begin installation until substrates have been properly prepared. 3.02 INSTALLATION A. Install signage holders in locations with mounting types indicated in accordance manufacturer’s

instructions. Square, plumb, and level units. B. Install inserts not more than 48 hours prior to Date of Substantial Completion complete with correct

copy in place. Conform to ADA requirements for tactile graphics signage. 3.03 CLEANING

A. Clean exposed surfaces not more than 48 hours prior to Date of Substantial Completion in accordance with manufacturer's written cleaning instructions.

3.04 PROTECTION

A. Protect installed products until completion of project. B. Touch-up, repair or replace damaged products before Substantial Completion.

3.05 SCHEDULES A. Refer to Signage Schedule and Drawings for sizes, locations, sign types, layouts, typestyle, sign

text/copy and graphics. END OF SECTION

ST-101

Graphics shown are representative only. Use onlyapproved artwork and graphics standards for facedecoration.

This is an original unpublished design, created by SignManagement Consultants, Inc. These drawings shall notbe used except for the project in which they weredeveloped without owner approval. These documentsare for design intent purposes and shall not beinterpreted as a final design. The product manufacturershall be responsible for all structural, electrical, andmechanical engineering.

Workstation Sign - Large

Interior Signage

November 5, 2012

Aluminum extrusion

Insert (.095 maximumthickness)

Sign SpecificationsFrame/HolderColor: Natural Satin AnodizedTop/Bottom Cap: .040" Natural

Satin Anodized AluminumMounting: Panel Clip

Inserts.040" clear PETG (non-glare)

lens/cover

ManufacturerAPCO Signs Arcadia Series 1000Model ARH90-150, or equivalentversion to meet specs.

Printed Graphics (by Customer)Color: Top is White background

with Pantone 424C Dark Graytext. Bottom is Pantone 424CDark Gray field and text isPantone 420C Light Gray.

Primary Font: Helvetica Neue 65Medium

Secondary Font: Helvetica Neue55 Roman

Cross SectionScale: Half

State of Tennessee

.906".906" 5.656" (visible opening)

7 1/2"

5 7/8" (insert width)

7/16" 7/16"5" (max text width)

2 3/

8"(m

ax te

xt h

eigh

t)

3/8"

min

.3/

8" m

in.

1 5/

8"

Aluminumextrusion

Laser printed graphicsw/ clear lens (printedgraphics by customer)

WS1 - Large Workstation SignScale: Half

1 1/

8"

3 1/

2"

5/16

"1/

2"9/

16"

Aluminum panel clip(See dwg. ST-103)

ST-102



Workstation Sign - Small

Interior Signage

November 5, 2012

Aluminum extrusion


Cross SectionScale: half

State of Tennessee.906".906" 5.656" (visible opening)

7 1/2"


7/16" 7/16"5" (max text width)

2 3/

8"(m

ax te

xt h

eigh

t)

3/8"

min

.3/

8" m

in.

1 5/

8"

WS2 - Alternate Layout 5/16

"1/

2"

1 1/

4"1

1/8"

2 3/

8"

1/2"

(max

text

hei

ght)

Aluminumextrusion

WS2 - Small Workstation SignScale: Half

9/16

"Laser printed graphicsw/ clear lens (printedgraphics by customer)

Aluminum panel clip(See dwg. ST-103)




lens/cover


Printed Graphics (by Customer)Color: White background with

Pantone 424C Dark Gray text.For Alternate layout with roomnumber, bottom is Pantone424C Dark Gray field and text isPantone 420C Light Gray.


ST-103



Workstation Sign Panel Clip

Interior Signage

October 26, 2012

State of Tennessee

Aluminumframe/holder

Workstation Sign Panel ClipScale: Half

.040" Natural Satin Anodizedformed aluminum panel clip

2"

2"

2 3/16" 1"

End View

ST-201



Office / Room / SupportSpace Sign

Interior Signage

November 5, 2012

Aluminum extrusion


1.08"1.08" 8"

10 3/16"

7/8"


Aluminum extrusion

Raised graphics

Braille

OS1 - Office / Room / Support SignScale: 3" = 1'-0"

Cross SectionScale: 3" = 1'-0"

State of Tennessee

OS1 Alternate Layout 3OS1 Alternate Layout 2

ADA Band laminatedto clear lens

3 1/

2"2

3/8"

5 7/

8"

1/2"

min

.1/

2" m

in.

1" 1"6 1/2" (max text width)

2 1/

2"(m

ax te

xt h

eigh

t)

3/4"

1 1/

8"


Satin Anodized AluminumMounting: Wall or Glass (verify)


lens/cover

.020" Polyester backedphotopolymer ADA Bandlaminated to clear lens.

Color: Pantone 424C Dark Graywith Pantone 420C Light Graygraphics (Braille color matchesbackground)

Font: Helvetica (verify font meetscurrent ADA requirements)



with Pantone 424C Dark Graytext.




ST-202



Department ID Sign

Interior Signage

November 5, 2012

Aluminum extrusion


1.08"1.08" 8"

10 3/16"

7/8"


Aluminum extrusion

DS1 - Department ID SignScale: 3" = 1'-0"


State of Tennessee


2 3/

8"6

1/8"

8 1/

2"

1/2"

min

.1/

2" m

in.

5 1/

8" (

max

text

hei

ght)

Optional laser-printedDark Gray band(printed by customer)


Optional Panel Clip(verify mounting priorto manufacturing sign)

3"2"

Sign SpecificationsFrame/HolderColor: Natural Satin AnodizedTop/Bottom Cap & Optional Panel

Clip: .040" Natural SatinAnodized Aluminum


lens/cover



Pantone 424C Dark Gray text.Optional Dark Gray band isPantone 424C.



End View1"

2 3/16"

ST-203



Conference Room Sign

Interior Signage

November 5, 2012

8 1/

2"

Aluminum extrusion


1.08"1.08" 8"

10 3/16"

7/8"


Aluminum extrusion

Raised graphics

Braille

CR1 - Conference Room SignScale: 3" = 1'-0"


State of Tennessee

2 3/

8"6

1/8"

3/4"

1 1/

8"


1/2"

min

.1/

2" m

in.

4"(m

ax te

xt h

eigh

t)


Satin Anodized AluminumMounting: Wall or glass (verify)


lens/cover

.020" Polyester backedphotopolymer ADA Bandlaminated to clear lens.

Color: Pantone 424C Dark Graywith Pantone 420C Light Graygraphics (Braille color matchesbackground)

Font: Helvetica (verify font meetscurrent ADA requirements)



Pantone 424C Dark Gray text.Primary Font: Helvetica Neue 65

MediumSecondary Font: Helvetica Neue

55 Roman


ST-301



Large Restroom Sign

Interior Signage

November 5, 20126 1/

8"2

3/8"

8 1/

2"

Aluminum extrusion


1.08"1.08" 8"

10 3/16"

7/8"


Aluminum extrusion

Raised graphics

Braille

Silk screened graphicspanel

RR1 - Restroom Sign (Unisex / Accessible)Scale: 3" = 1'-0"

Cross SectionScale: 3" = 1'-0" State of Tennessee

4 1/

2"13

/16"

13/1

6"

2 1/

8"


Satin Anodized AluminumMounting: Wall

Inserts.040" PETG with first surface

silkscreened pictogramColor: White background with

Pantone 424C Dark Graypictogram

ADA Insert 1/16" photopolymerColor: Pantone 424C Dark Gray

field and text is Pantone 420CLight Gray (Braille colormatches background)

Font: Helvetica (verify fontmeets current ADArequirements)

ManufacturerAPCO Signs Arcadia Series

1000 Model ARH85-215, orequivalent version to meetspecs.

1 1/

8"11

/16"

ST-302



Standard Restroom Sign

Interior Signage

November 5, 2012

Aluminum extrusion


Aluminum extrusion

Raised graphics

Braille

Silk screened graphicspanel

RR2 - Restroom Sign (Men)Scale: 3" = 1'-0"

RR3 - Restroom Sign(Women)


State of Tennessee











9/16

"

2 3/

8"6

1/8"

8 1/

2"

4 1/

2"13

/16"

13/1

6"

11/1

6"1

1/8"

.906".906" 5.656"(visible opening)

7 1/2"


RR4 - Restroom Sign(Accessible Men)

RR5 - Restroom Sign(Accessible Women)

2 1/

8"

2 1/

8"

ST-303



Exterior Stair IdentificationSign

Interior Signage

November 5, 2012

State of Tennessee











Aluminum extrusion


Cross SectionScale: Half

.906".906" 5.656" (visible opening)

7 1/2"


Aluminumextrusion

S1 - Stair SignScale: Half

9/16

"

Silk screenedgraphics panel

Raised graphics

Braille

1 1/

16"

4"1

1/16

"

6 1/

8"2

3/8"

8 1/

2"

11/1

6"1

1/8"

ST-401



Evacuation Map Sign

Interior Signage

November 5, 2012

EM1 - Evacuation MapScale: 3" = 1'-0"

Note: Map is for representation only.


State of Tennessee

Aluminum extrusion


Aluminumextrusion

1.2"1.2" 10.595" (visible opening)

1'-1"

11" (insert width)

3/4"3/4" 9 1/2" (max graphics width)

2 1/

2"8

1/2"

11"

1/2"

min

.1/

2" m

in.

7 1/

2" (

max

. gra

phic

s he

ight

)

3/4"

7/8"

1"

Laser printedgraphics w/ clearlens (printedgraphics bycustomer)


Satin Anodized AluminumMounting: Wall or Panel Clip

(verify)


lens/cover



with laser printed graphics. Ifdesired for consistency, maketext Pantone 424C Dark Gray.Bottom Dark Gray band isPantone 424C with Pantone420C Light Gray text.



1"

2 3/16"

Optional PanelClip (verifymounting priorto manufacturingsign)

4"

2"

2"6"

min

.Attach clip w/structuraladhesive &rivets if req'd

Partial End View

ST-402



Small Directory / DirectionalSign

Interior Signage

November 5, 2012

D1 - Small Directory / Directional SignScale: 3" = 1'-0"

State of Tennessee


Aluminum extrusion


Aluminumextrusion

Laser printedgraphics w/ clearlens (printed graphicsby customer)

1.2"1.2" 10.595" (visible opening)

1'-1"

11" (insert width)

3/4"3/4" 9 1/2" (max graphics width)

Sign SpecificationsFrame/HolderColor: Natural Satin AnodizedTop/Bottom Cap & Optional PanelClip: .040" Natural Satin AnodizedAluminumMounting: Wall or Panel Clip (verify)

Inserts.040" clear PETG (non-glare)lens/cover



Pantone 424C Dark Gray text.Optional Dark Gray band isPantone 424C and text is Pantone420C Light Gray.


Secondary Font: Helvetica Neue 55Roman

Note that text sizes provided are ageneral guide and can bemodified if desired depending onmessage.

1"

2 1/

2"1'

-2 1

/2" 1'

-5"

typ.

typ.

1 3/

8"1

3/8"

1"11/1

6" ty

p.13

/16"

1 3/16"

2 1/8"

1"

2 3/16"

Optional PanelClip (verifymounting prior tomanufacturingsign)

4"

2"

2"6"

min

.va

ries

Attach clip withstructuraladhesive &rivets if req'd

End ViewScale: 3" = 1'-0"

ST-403



Small Informational Sign

Interior Signage

November 5, 2012

Aluminum extrusion


D3 - Small Informational SignScale: 3" = 1'-0"

(Graphics shown for representation only.)


State of Tennessee

9/16

"

.906".906" 5.656"(visible opening)

7 1/2"


Aluminum extrusion

Laser printed graphicswith clear lens (printedgraphics by customer)

8 1/

2"




lens/cover



Pantone 424C Dark Gray text.Primary Font: Helvetica Neue 65

MediumSecondary Font: Helvetica Neue

55 Roman

7/16" 7/16"5"(max. graphic area)

3/8"

3/8"

7 3/

4" (

max

. gra

phic

are

a)

1/2"

ST-501



Large Directory Sign

Interior Signage

November 5, 2012

D2 - Large Directory SignScale: 1 1/2" = 1'-0"

Cross SectionScale: 1 1/2" = 1'-0"

State of Tennessee

1'-6 13/16"

1'-1

0"

1 1/

8"

Aluminum extrusion


Aluminum extrusion


1.219" 1.219"1'-4 3/8"

1'-5" (insert width)

1" 1"1'-3" (max. text width)

3"1'

-7"

1 1/

2"

Sign SpecificationsFrame/HolderColor: Natural Satin AnodizedTop/Bottom Cap & Optional PanelMounting: Wall

Inserts.060" clear PETG (non-glare)lens/cover



Pantone 424C Dark Gray text.Optional Dark Gray band isPantone 424C and text isPantone 420C Light Gray.



Note that text sizes provided are ageneral guide and can bemodified if desired depending onmessage.

1 3/

4"1

3/4"

typ.

7/8"

typ.

Alternate Graphics(To Be Determined and Provided By Customer)

1 1/2"

2 3/4"

ST-601



Stairwell Sign

Interior Signage

October 26, 2012

S2 - Stairwell SignScale: 3" = 1'-0"

(Text shown for representation only. Verify text beforemanufacturing.)

State of Tennessee

1'-0"

1'-6

"1'-4

"2"

5"

1" ty

p.

5/8

Sign SpecificationsTop Plaque:1/8" acrylic silkscreened with

opaque Pantone 424C DarkGray field and white HelveticaNeue 65 Medium text andHelvetica Bold level number.

Bottom Plaque:1/8" photopolymer with Pantone

424C Grey field and raisedwhite Helvetica Regular text,Braille color matchesbackground. (verify font meetscurrent ADA requirements)

Mounting:Double-sided tape and Silicone

adhesive

NotePrior to manufacturing, verify that

all local code and firedepartment regulations are met.

SIGN SPECIFICATIONS

Arcadia 1000 SeriesMounting: Panel ClipSize: A = 1", B = 2 3/16”, C = 2", D = 2"

Holder:Part Code: ARH90-150Size: O.D. 90mm x 190mm (3.54" x 7.48") Part Color: Natural SatinTop/Bottom Cap: Natural Satin

Insert:Part Code: ARI90-150-CL (ClearLens)I.D. Size: 90mm x 150mm (3.54" x 5.90") Paper Color: by customer

Sample Laser Printed Graphics: (printed by customer)

Copy: HelveticaNeue-Medium (HN65)Size: 15/32"Color: PMS 424 GreyFormat: LM/RM = 7/16"

Copy: HelveticaNeue-Regular (HR)Size: 7/16"Color: PMS 424 GreyFormat: LM/RM = 7/16"

Subsurface Silk-screened Graphics:Color Band:Size: 30mm x 150mmColor: PMS 424 Grey

Copy: HelveticaNeue-Regular (HR)Size: 1/2"Color: PMS 420 Light GreyFormat: LC, LM = 7/16"

Project: RHKRHK

Large Workstation SignArcadia 1000 Series

Work Order #: TBD

Approved By:

Approved Date:

Scale:Sales Rep:CSR/PM:

State of Tennessee WS1.1

Customer approval is required prior to production.

Tom CroweGuy Pearson 1/2" = 1"

Colors depicted are a general representation of the color specified. If color selection is critical, please request sample for approval.

Office of Finance

20.333A

John McDonald

Final

specifications swc 106 event number: 32110-5898 interior ... 106 interior exterior... ·...

Documents