specificatlons hydraulic crane model: unic urw1006c2e · specificatlons hydraulic crane model: unic...

S P E C I F I C A T I O N SSPEC. No. CC-1093

DATE SEP. 2013

SPECIFICATlONS

HYDRAULIC CRANE

MODEL: UNIC URW1006C2E

Specifications subject to change without notice.

UNIC CRANE PERFORMANCEMODEL : URW1006C2E

CRANE CAPACITY:

LIFTlNG CAPACITY : Max. 10.14t at 3.0m

(Including mass of hook: 140kg)

HOOK HEIGHT

ABOVE GROUND LEVEL : Max. 22.8m with 4- & 2-part line

Max. 23.0m with 1-part line

BELOW GROUND LEVEL : Max. 30.0m with 4-part line

Max. 62.0m with 2-part line

Max. 128m with 1-part line

WORKING RADIUS : Min 0.04m, Max. 21.93m

BOOM: 6-section box beam type telescoping boom

Boom Length

Retracted boom: 5.75m

Extended boom: 23.1m

Boom Extending Speed: 17.35m / 88s

Boom Raising Speed: 0° to 80° / 44s

WINCH: Hydraulic motor driven, planetary gear reduction, with

automatic mechanical brake and counterbalance valve

and wire rope retaining roller.

Hoisting Speed

Single line speed: 40 (64) m/min at 4th layer ():2nd

Hook speed: 10 (16) m/min at 4th layer with 4-part line ():2nd

20 (32) m/min at 4th layer with 2-part line ():2nd

Hook Block: 4- & 2-part line : 10.0t capacity, 3 sheaves with safety latch

1-part line : 2t capacity with safety latch

Mass of Hook Block: 4- & 2-part line : 140kg

1-part line : 50kg

Wire Rope

Construction (JIS): XP lWRC 6 × WS(31)

Diameter × Length: 13mm × 140m

Breaking strength: 131kN {13400kgf}

SLEWING: Hydraulic motor driven, worm gear reduction, spur

gear reduction, and worm self-locking brake

(supported by ball bearings)

Slewing Range: 360° continuous rotation on a ball bearing race

Slewing Speed: 1.3 rpm

-1/W1006C2E-

CC

-1093

OUTRIGGERS:

Horizontal: A double acting hydraulic cylinder, direct pushing type

(directly connected with hydraulic automatic lock device)

Vertical: A double acting hydraulic cylinder, direct pushing type

(directly connected with hydraulic automatic lock device)

Position: A double acting hydraulic cylinder with link system

HYDRAULIC SYSTEM:

Hydraulic Pump

Type: Variable delivery piston pump

Rated pressure: 24.5MPa {250kgf/cm2}

Rated delivery: 105 /min.

Rated revolution: 2500rpm

Hydraulic oil tank: 215

Hydraulic Valves

Control valve: Multiple control valve, spring centered,

spool-type, with pressure relief valve

Pressure relief

valve setting: For crawling: 27.5MPa {280kgf/cm2}

For crane (except boom raising) 20.6MPa {210kgf/cm2}

For boom raising only 15.7MPa {160kgf/cm2}

Counterbalance valve: Boom raising and boom telescoping cylinders

Pilot-operated

check valve: Outrigger cylinders (Horizontal)

Double pilot-operated

check valve: Outrigger cylinders (Vertical)

Hydraulic Actuators

Hydraulic motors: Hoisting: Axial plunger type

Slewing: Axial plunger type

Hydraulic cylinders: Double acting type

2×Boom raising cylinder

3×Boom telescoping cylinder

4×Outrigger cylinder (Horizontal)

4×Outrigger cylinder (Vertical)

4×Outrigger cylinder (Position)

1×Jib tilt cylinder(OPTION)

CRAWLING GEAR:

Track rink: 135 mm X 47 rink

Crawler belt width: 400 mm

Ground contact: 2515mm

Ground contact pressure: 68.2kPa (0.70kgf/cm2)

(based on mass of crane is 14,000kg )

Crawling speed: 0~2.6km/h, forward/backward

Hill climbing ability: 23°

Engine: 29.8kW(40.5ps)/2500rpm, Continuous rated output

Total emission 2.189

-2/W1006C2E-

CC

-1093

Steering: Hydraulic drive independent of left/right

Parking brake: Disc brake with hydraulic motor built-in

Starter: Starter motor

Fuel tank: 75 capacity

Alternator 12V – 40 A

Battery 12V 72Ah (115D31R)

Note: The figures in relation to the speed are on the basis of no-load running at rated oil

flow condition.

MAJOR SPECIFICATION OF ELECTRIC POWER UINT: (OPTION)

Hydraulic pump

Type Variable delivery piston pump

Rated pressure 24.5MPa{250kgf/cm2}

AC400V 50Hz AC400-440V60Hz

Rated delivery 50 /min 60 /min

Rated revolution 1,460rpm 1,760rpm

Motor

Rated output 11kW(3-phase 4 poles)

Rated voltage AC400/400-440V 50/60Hz

（Allowable range: AC400/400-440V±10%)

Rated frequency 50/60Hz(Allowable range : 50/60Hz±5%)

Control box

Rated voltage AC400/400V-440V 50/60Hz

(Allowable range: AC400/400-440V±10%)

Rated frequency 50/60Hz(Allowable range : 50/60Hz±5%)

Starting-up Star-delta start-up

Crane power supply DC12V(240W)output

With AC/DC converter built-in

Specified speed when using electric power unit

<50Hz> <60Hz>

Hoisting Speed Single line speed 20.8(36)m/min 24.8(43.2)m/min

:at 4th layer ():2nd

Hook speed 5.2(9)m/min 6.2(10.8)m/min

:at 4th layer with 4-part line ():2nd

12.4(21.6)m/min

:at 4th layer with 4-part line ():2nd

Boom extending Speed 17.35m/123s 17.35m/103s

Boom Raising Speed 0° to 80°/80s 0° to 80°/67s

Slewing Speed 1.2rpm 1.2rpm

Crawling Speed(forward/backward) 0-1.3km/h 0-1.5km/h

Caution

Not use engine and electric power unit together.

Be sure to confirm before starting the electric power unit that the engine has been stopped.

-3/W1006C2E-

CC

-1093

SAFETY DEVICES: 1. Pressure relief valve for hydraulic circuit

2. Counterbalance valves for boom raising

and boom telescoping cylinders

3. Pilot-operated check valves for outrigger

cylinders (Horizontal)

4. Double pilot-operated check valves for outrigger

cylinders (Vertical)

5. Boom angle indicator with load indicator

6. Hook safety latch

7. Automatic mechanical brake for winch

8. Automatic stop for over winding

9. Over winding alarm

10. Automatic stop for leaving minimum wire rope

11. Emergency stop button

12. Inter-lock device of crane and crawling levers

13. Inter-lock device of crane and outriggers

14. Three colored lamp

15. Level

16. Headlight

DIMENSIONS OF CRANE: 6060mm (L) X 2000mm (W) X 2460mm (H)

MASS OF CRANE: Approx. 14,000 kg

(Including mass of option item (power unit))

JIB

LIFTlNG CAPACITY : Max. 1.05t at 9.7m (boom angle 70° and jib tilt angle 0° )

(Including mass of hook : 50kg)

HOOK HEIGHT

ABOVE GROUND LEVEL : Max. 30.7m

BELOW GROUND LEVEL : Max. 123.0m with 1-part line

WORKING RADIUS : Max. 24.3m

-4/W1006C2E-

CC

-1093

RADIO REMOTE CONTROLLER

Model: RC-500H-EU3

System: Manual/remote control combined system

Control: 1. Selective control Boom raise / lower

Crane mode / Outrigger(Position/

Horizontal / Vertical ) mode

Hook hoist / lower

( Winch 1st / 2nd )

Boom extend / retract

( Boom telescoping / Jib tilt )

Slewing clockwise / counterclockwise

( Engine start / stop )

2. Store hook Hook storage

3. Start/Warning horn Start radio remote control and

recovered emergency stop/ Horn

4. Speed control lever Hydraulic control and engine

speed control

5. Speed mode select High speed mode(normal mode)/

Medium speed mode/Low speed mode

6. Key switch Transmitter power on-off

7. Emergency-sｔop switch Stop function of crane

Power supply: Controller Crawler battery (DC12V)

Transmitter Four R03 dry cells (DC6V)

Power consumption: Controller Approx. 50 W

Single selective operation at

maximum operating speed

Transmitter Battery life more than 20 hours

(of transmitter operation)

Transmitted output power: 10mW

Operating range: Approx. 100m

Frequency: 433 ~ 434 MHz Band

Unit address: Special address combining a frequency and ID code is

assigned to each unit.

Mass of transmitter: 700g (with batteries)

Ambient temperature: -20 °C ~ +60 °C

Storage temperature: -30 °C ~ +75 °C

Caution

In accordance with our policy of constant product improvement , all specifications are subject to

change without notice or obligations.

-5/W1006C2E-

CC

-1093

WORKING RANGE:

Note: The above figures are based on no-load condition and do not include the deflection of the

boom.

-6/W1006C2E

CC

-1093

Heig

ht(

m)

Working Radius(m)

23.1m Boom

19.65m Boom

16.2m Boom

12.75m Boom

9.25m Boom

5.75m Boom

TILT ANGLE 40°

TILT ANGLE 0°

TILT ANGLE 20°

TILT ANGLE 60°

-

WORKING RANGE

Main Boom,4-Part Line


boom

-7/W1006C2E-

CC

-1093

Heig

ht(

m)

Working Radius(m)

WORKING RANGE

Main Boom ,2-Part Line


boom

-8/W1006C2E-

CC

-1093

Heig

ht(

m)

Working Radius(m)

WORKING RANGE

Main Boom ,Single Line

Note: The above figures are

based on no-load condition

and do not include the

deflection of the boom

-9/W1006C2E-

CC

-1093

Heig

ht(

m)

Working Radius(m)

WORKING RANGE

Jib , Tilt Angle 0－40°,Outriggers extended to maximum and halfway


boom

-10/W1006C2E-

CC

-1093

Heig

ht(

m)

Working Radius(m)

WORKING RANGE

Jib , Tilt Angle 0－40°,Outriggers extended to minimum


boom

-11/W1006C2E-

CC

-1093

Heig

ht(

m)

Working Radius(m)

WORKING RANGE

Jib , Tilt Angle 40－60°,Outriggers extended to maximum, halfway and minimum


boom

-12/W1006C2E-

CC

-1093

Heig

ht(

m)

Working Radius(m)

WORKING RANGE

Pick & Carry

Note: ・The above figures are based on no-load condition and do not include the deflection of

the boom

・When the crane crawl , The loads not so up to keep the crane stability.

-13/W1006C2E-

CC

-1093

Heig

ht(

m)

Working Radius(m)

CC

-1093

NET RATED LOADS:

Main Boom / 4-Part line hook ・・・PROHIBITED AREA OF CRANE OPERATIONS

Boom-sections extended: ①

WORKING RADIUS (m) 2.5 3.0 3.3 3.5 4.0 4.58

NETRATEDLOAD

( t )

Outriggers extendedto maximum

10.0 10.0 8.8 7.6 6.3 5.0

Outriggers extendedto halfway

10.0 10.0 8.8 7.6 6.3 5.0

Outriggers extendedto minimum

10.0 10.0 8.8 7.6 6.3 5.0

Boom-sections extended: ①+②

WORKING RADIUS (m) 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.08

NETRATEDLOAD

( t )


10.0 10.0 7.6 6.3 5.0 4.0 3.0 2.0


10.0 10.0 7.6 6.3 4.8 3.65 2.7 1.7


10.0 10.0 7.6 6.3 4.5 3.2 2.3 1.45

Boom-sections extended: ①+②+③

WORKING RADIUS (m) 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.58

NETRATEDLOAD

( t )


5.7 4.7 3.8 3.0 2.25 1.7 1.4 1.0


5.7 4.7 3.8 2.85 2.05 1.55 1.15 0.8


5.7 4.5 3.45 2.45 1.7 1.2 0.85 0.47

Boom-sections extended: ①+②+③+④

WORKING RADIUS (m) 5.0 6.0 7.0 8.0 10.0 11.0 12.0 13.0 14.0 15.03

NETRATEDLOAD

( t )


3.8 3.3 2.85 2.4 1.55 1.25 0.95 0.8 0.7 0.6


3.8 3.3 2.85 2.4 1.55 1.15 0.88 0.7 0.55 0.4


3.8 3.2 2.6 2.06 1.16 0.85 0.6 0.42 0.25 0.1

Boom-sections extended: ①+②+③+④+⑤

WORKING RADIUS (m) 6.0 8.0 10.0 12.0 14.0 15.0 16.0 17.0 18.0 18.48

NETRATEDLOAD

( t )


2.8 2.2 1.65 1.15 0.8 0.65 0.55 0.45 0.35 0.3


2.8 2.2 1.65 1.15 0.71 0.56 0.43 0.31 0.21 0.16


2.8 2.0 1.33 0.81 0.47 0.34 0.21 0.07

Boom-sections extended: ①+②+③+④+⑤+⑥

WORKING RADIUS (m) 8.0 10.0 12.0 14.0 16.0 18.0 20.0 21.93

NETRATEDLOAD

( t )


2.0 1.55 1.15 0.85 0.7 0.5 0.3 0.15


2.0 1.55 1.15 0.78 0.47 0.23 0.08


2.0 1.45 0.95 0.58 0.32 0.11

-14/W1006C2E-

CC

-1093

NET RATED LOADS:

Main Boom / 2-Part line hook ・・・PROHIBITED AREA OF CRANE OPERATIONS


WORKING RADIUS (m) 2.5 3.0 3.3 3.5 4.0 4.58

NETRATEDLOAD

( t )


5.0 5.0 5.0 5.0 5.0 5.0


5.0 5.0 5.0 5.0 5.0 5.0


5.0 5.0 5.0 5.0 5.0 5.0


WORKING RADIUS (m) 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.08

NETRATEDLOAD

( t )


5.0 5.0 5.0 5.0 5.0 4.0 3.0 2.0


5.0 5.0 5.0 5.0 4.8 3.65 2.7 1.7


5.0 5.0 5.0 5.0 4.5 3.2 2.3 1.45


WORKING RADIUS (m) 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.58

NETRATEDLOAD

( t )


5.0 4.7 3.8 3.0 2.25 1.7 1.4 1.0


5.0 4.7 3.8 2.85 2.05 1.55 1.15 0.8


5.0 4.5 3.45 2.45 1.7 1.2 0.85 0.47


WORKING RADIUS (m) 5.0 6.0 7.0 8.0 10.0 11.0 12.0 13.0 14.0 15.03

NETRATEDLOAD

( t )


3.8 3.3 2.85 2.4 1.55 1.25 0.95 0.8 0.7 0.6


3.8 3.3 2.85 2.4 1.55 1.15 0.88 0.7 0.55 0.4


3.8 3.2 2.6 2.06 1.16 0.85 0.6 0.42 0.25 0.1


WORKING RADIUS (m) 6.0 8.0 10.0 12.0 14.0 15.0 16.0 17.0 18.0 18.48

NETRATEDLOAD

( t )


2.8 2.2 1.65 1.15 0.8 0.65 0.55 0.45 0.35 0.3


2.8 2.2 1.65 1.15 0.71 0.56 0.43 0.31 0.21 0.16


2.8 2.0 1.33 0.81 0.47 0.34 0.21 0.07


WORKING RADIUS (m) 8.0 10.0 12.0 14.0 16.0 18.0 20.0 21.93

NETRATEDLOAD

( t )


2.0 1.55 1.15 0.85 0.7 0.5 0.3 0.15


2.0 1.55 1.15 0.78 0.47 0.23 0.08


2.0 1.45 0.95 0.58 0.32 0.11

-15/W1006C2E-

CC

-1093

NET RATED LOADS:

Main Boom / single line hook ・・・PROHIBITED AREA OF CRANE OPERATIONS


WORKING RADIUS (m) 2.5 3.0 3.3 3.5 4.0 4.58

NETRATEDLOAD

( t )


2.0 2.0 2.0 2.0 2.0 2.0


2.0 2.0 2.0 2.0 2.0 2.0


2.0 2.0 2.0 2.0 2.0 2.0


WORKING RADIUS (m) 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.08

NETRATEDLOAD

( t )


2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0


2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.7


2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.45


WORKING RADIUS (m) 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.58

NETRATEDLOAD

( t )


2.0 2.0 2.0 2.0 2.0 1.7 1.4 1.0


2.0 2.0 2.0 2.0 2.0 1.55 1.15 0.8


2.0 2.0 2.0 2.0 1.7 1.2 0.85 0.47


WORKING RADIUS (m) 5.0 6.0 7.0 8.0 10.0 11.0 12.0 13.0 14.0 15.03

NETRATEDLOAD

( t )


2.0 2.0 2.0 2.0 1.55 1.25 0.95 0.8 0.7 0.6


2.0 2.0 2.0 2.0 1.55 1.15 0.88 0.7 0.55 0.4


2.0 2.0 2.0 2.0 1.16 0.85 0.6 0.42 0.25 0.1


WORKING RADIUS (m) 6.0 8.0 10.0 12.0 14.0 15.0 16.0 17.0 18.0 18.48

NETRATEDLOAD

( t )


2.0 2.0 1.65 1.15 0.8 0.65 0.55 0.45 0.35 0.3


2.0 2.0 1.65 1.15 0.71 0.56 0.43 0.31 0.21 0.16


2.0 2.0 1.33 0.81 0.47 0.34 0.21 0.07


WORKING RADIUS (m) 8.0 10.0 12.0 14.0 16.0 18.0 20.0 21.93

NETRATEDLOAD

( t )


2.0 1.55 1.15 0.85 0.7 0.5 0.3 0.15


2.0 1.55 1.15 0.78 0.47 0.23 0.08


2.0 1.45 0.95 0.58 0.32 0.11

-16/W1006C2E-

JIBOutriggers extended to maximum

Outriggers extended to halfway

Outriggers extended to minimum

-17/W1006C2E-

MAIN BOOMANGLE

[°]

JIB① ( 4.73m) JIB② ( 7.87m )

TILT ANGLE [°] TILT ANGLE [°]

0 20 40 60 0 20 40 60

80 1000 850 700 610 1000 630 400 300

70 1000 850 700 610 1000 630 400 300

60 950 700 530 480 770 430 280 230

50 700 520 400 520 280 200

40 280 250 200 200 170 150

30

PROHIBITED AREAOF CRANE OPERATION


20

10

0

MAIN BOOMANGLE

[°]

JIB① ( 4.73m) JIB② ( 7.87m )


0 20 40 60 0 20 40 60

80 1000 850 700 610 1000 630 400 300

70 1000 850 700 610 1000 630 400 300

60 950 700 530 480 700 430 280 230

50 420 400 400 350 350 200

40 200 200 180 130 130 130

30



20

10

0

MAIN BOOMANGLE

[°]

JIB① ( 4.73m) JIB② ( 7.87m )


0 20 40 60 0 20 40 60

80 1000 850 700 610 1000 630 400 300

70 1000 850 700 610 1000 630 400 300

60 700 600 530 480 600 430 280 230

50 300 270 220 250 200 200

40

30



20

10

0

CC

-1093

CAUTION

1. Net rated loads are performance when the crane is placed level and is based on an actual

working radius including boom deflection under loaded.

Net rated loads are also based on strength and stability of the crane.

2. Net rated loads must be reduced in accordance with wind, ground condition and operating

speed.

3. Net rated loads are the lifting capacities except for the mass of hook.(4&2-part line :140kg)

(1-part line : 50kg)

4. When the outriggers are set without extending to their maximum, stability of the crane

deteriorates remarkably.

Pay attention that the net rated loads are changed according to how far the outriggers are

extended.

5. If any one of the four outriggers is not fully extended, operate with performance of not

maximum extension.

6. The mass of the slings and any accessories attached to the boom or load line must be

deducted from the above net rated loads in the chart.

7. In order to make correct operation, read the instruction manual carefully before crane

operation.

PICK & CARRY:

LIFTING CAPACITY: 1,640kg (Including mass of hook:140kg)

WORKING RADIUS: 2.5m

BOOM LENGTH: BOOM 1 and 1+2 only

-18/W1006C2E-

CC

-1093

-19/W1006C2E-

CC

-1093

specificatlons hydraulic crane model: unic urw1006c2e · specificatlons hydraulic crane model: unic...

Documents