specifiers’ information from the expanded metal company ltd. · specifiers’ information from...
TRANSCRIPT
www.expandedmetalcompany.co.uk
Specifiers’ Information from
The Expanded Metal Company Ltd.
Uniclass
L6637:N544:P41
EPIC
F513:X4121
CI/SfBJh2 (U47)
Lea�et No. IP90January 07
Cert. No. 731b
Why Choose The Expanded Metal Company?
Securilath™ HDR
Securilath ™ MD1
Securilath ™ HD1Quality Product Guarantee
Active Partnerships with Police Forces & Crime Prevention Organisations
Over 120 Years Expertise & Experience
LPCB accredited security levels (when �tted in accordance with guidlines **)
Why Securilath ™?As potential break-ins through doors and windows have been ‘target-hardened’ by grilles, shutters and alarms, would-be intruders have turnedtheir attention to forced entry through walls, partitions, ceilings and roofs.
To counteract this, the Securilath™ system has been developedas a discreet method of signi�cantly delaying the most determinedintruder from creating an aperture large enough to gain entry to yourclient’s premises.
Securilath™ can be installed at the time of construction into internal orexternal walls (solid or stud), ceilings and roofs, or can be retro-�tted whilstrefurbishment is carried out. The option of �nishing with dry lining or renderis not lost with Securilath™, as our range covers both options. Details oftypical installations are shown opposite.
Cash Handling Stores Wholesale & Retail Outlets
Control Rooms Petrol Station Kiosks
Firearm Stores High Value Goods Stores
Computer Rooms Secure Units
Remote Facility Security Pharmaceutical Stores
Although the typical focus is on protecting high value property, it makessense to specify Securilath™ as a standard preventative measure in allsecurity packages.
Typical Securilath ™ Applications
TH
E
BU
RG
LA
R
BE
AT
ER
–
S
PE
CI
FY
S
EC
UR
IL
AT
H™
A
S
ST
AN
DA
RD
The Expanded Metal Company can provide technical and design information and site surveys are available. We also o�er a cut-to-size service. *Render and plaster �nishes should use galvanised Securilath™**Guidelines available upon request
ProductReference
Application MaterialFinish
ProductionProcess
Weightkg/m 2
Stock SheetSizes (mm)
HD1 Heavyweightoption forsecurity in walls,partitions andceilings.
Mild Steel
Galvanised
Painted
3mm thick�attened mesh
8.59 2440 x 1220 LW SW
MD1 Lighter weightoption forsecurity in walls,partitions andceilings androofs.
Mild Steel
Galvanised
Painted
1.2mm thick�attened mesh
1.85 2440 x 12201220 x 2440 LW SW
HDR For internal/external brick orblock walls.An excellent keyfor plaster/render �nishes.
Mild Steel
Galvanised*
Painted
3mm thickstandard pro�lemesh, raisededge forrendering
6.52 2440 x 1220 LW SW
Installation, Application and Fixing DetailsSecurilath™ is easily �xed to brickwork, blockwork, stud partitioning, ceiling joists and roofs in metal or timber.It is important to note that Securilath™ sheets should be butted together, and not overlapped. Suggested�xings for popular applications are shown below. For additional security we suggest reducing the spacingshown when Securilath™ is �xed adjacent to door or windows.
HD1MD1
MD1
HDRHD1MD1
HD1MD1
Timber Stud Wallsand Ceiling Joists/RaftersSecurilath™ �xed to stud with30-38mm galvanised staples,30-38mm galvanised screwnails, or 65mmx 3.35mm brightannular nails (to BS1202)and min 25mm dia x 1.5mmgalvanized washers �xed atmaximum 450mm centres.
Metal Stud Walls,Purlins and RoofsSecurilath™ �xed to metalwork withNo 6 or 8 x 30 zinc plated self tappingscrews, complete with 25mm dia x 1.5mm galvanised washers �xed atmaximum 450mm centres.
Brick or BlockworkApplicationsSuitable for both render andplaster �nishes. Securilath™HDR mesh �xed with eithersuitable shot �red �xing, orplug and M6 x 50mm screwand plug, complete withminimum 25mm dia x 1.5mm galvanized washers atmaximum 450mm centres.
TH
E
BU
RG
LA
R
BE
AT
ER
–
S
PE
CI
FY
S
EC
UR
IL
AT
H™
A
S
ST
AN
DA
RD
Facing FixingsWe suggest that plasterboard facing is�xed onto Securilath™and stud using buglehead drywall screw�xings PN2 3.5x55 BZPat maximum 450mmcentres.Plywood should be �xed using 4.5mm x 50mmBZP or passivated wood screws at maximum450mm centres.
PLEASE NOTE that the information relating to �xings shown in this brochure is for guidance only. Selection of a �xing for a particular application depends on a whole range of factors, including on-site conditions of which only project sta� are aware. We accept no responsibility whatsoever for our advice where your data is incorrect or where assumptions we make are unsuitable for speci�c needs. The company has a policy of continuous development, and reserves the right to alter speci�cations etc.without notice.
Cert. No. FMO1344 Cert. No. EMS 39483Quality and Environmental Standards
Further Information and HelplineIf you would like further information on our Securilath™ range of products, samples,or assistance in making up a Securilath™ speci�cation for your client, then pleasecontact our Sales team, where your enquiry will receive immediate attention.Information on other expanded metal products is also available on the helpline.
Technical advice and a cut-to-size service are available. Please contact us for freeproduct samples. A digital version of this brochure is also available on request - e-mail [email protected]
LPCB Certi�cationSecurilath™ has undergone rigorous testing to achieve LPCBSecurity accreditation. In order to achieve this standard, theSecurilath™ must be installed to replicate the test panels. Detailsof the standards obtained and installation details are available ina separate guide ( available upon request ).
PO Box 14, Longhill Industrial Estate (North)Hartlepool, TS25 1PR, United Kingdom
Helpline Tel: 01429 867388 · Fax: 01429 866795 E-mail: [email protected]
w w w . e x p a n d e d m e t a l c o m p a n y . c o . u k
Other Products are Available
Helpline T elephone: 01429 867388
The Expanded Metal Company Ltd.
Cert. No. 731b
Cert. No. 731b