spie event printed pieces(mram): fundamentals, current status, and emerging device concepts...
TRANSCRIPT
SPIE Sales · [email protected] · Tel: +1 360 676 3290 · Fax: +1 360 647 1445
spie.org/MI
TEC
HN
ICA
L PR
OG
RA
M
TECHNICAL
PROGRAM
Your complete guide to conferences, courses, and special events.
Medical Imaging
2019
16–21 February 2019
Town and Country Resort & Convention Center
San Diego, California, USA
WELCOME BACK TO
SAN DIEGO
MI19 Final#10.indd i
1/18/19 5:36 PM
SPIE Event Printed Pieces
spie.org/events
TECHNICAL
PROGRAM
TEC
HN
ICA
L P
RO
GR
AM
spie.org/pw
Conferences and Courses
2–7 February 2019
BIOS Expo
2–3 January 2019
Photonics West Exhibition
5–7 February 2019
The Moscone Center
San Francisco, USA
Photonics West2019
Smart Structures + Nondestructive Evaluation 2019
TECHNICALPROGRAM
TEC
HN
ICA
L P
RO
GR
AM
Conferences and Course3–7 March 2019
Embassy Suites by Hilton DenverDenver, Colorado, USA
Your complete guide to conferences and special events
spie.org/ss
EXHIBITION
PREVIEWRegister Free Today
www.spie.org/pwexhibit
The Moscone Center • San Francisco, California, USA
BIOS Expo
2–3 February 2019
Photonics West
5–7 February 2019
EXHIBITION
PREVIEWRegister Free Today
www.spie.org/pwexhibit
The Moscone Center • San Francisco, California, USA
BIOS Expo
2–3 February 2019
Photonics West
5–7 February 2019
PHO
TON
ICS
WES
T EX
HIB
ITIO
N P
REV
IEW
Photonics West
EXHIBITION
PREVIEW
2019
Register Free Today
spie.org/pwexhibit
The Moscone Center • San Francisco, California, USA
BIOS Expo
2–3 February 2019
Photonics West
5–7 February 2019
PW19 Ex Preview#1-PRINT#10.indd i
11/9/18 2:58 PM
www.spie.org/dcspreview
DE
FEN
SE +
CO
MM
ER
CIA
L SE
NSI
NG
EX
HIB
ITIO
N P
RE
VIE
W
Defense +
Commercial Sensing
EXHIBITION
PREVIEW
2019
Register Free Today
www.spie.org/dcs-expoBaltimore Convention Center • Baltimore, Maryland, USA DCS Expo
16–18 April 2019
Conferences + Courses
14–18 April 2019
25 February–1 March 2018
spie.org/al
EXHIBITIONGUIDE
Advanced Lithography 2019
Moving technology to market™
San Jose Convention CenterSan Jose, California, USA
Exhibition
Conferences + Courses24–28 February 2019
26–27 February 2019
EX
HIB
ITIO
N G
UID
E
spie.org/DCS
EXHIBITIONGUIDE
Defense + Commercial Sensing2019
Moving technology to market™
Baltimore Convention Center Baltimore, Maryland, USA
DCS Expo
Conferences and Courses14–18 April 2019
16–18 April 2019
EX
HIB
ITIO
N G
UID
E
spie.org/pw
EXHIBITIONGUIDE
Photonics West2019
Moving technology to market™
The Moscone CenterSan Francisco, USA
BIOS EXPO
PHOTONICS WEST EXHIBITION
2–3 February 2019
5–7 February 2019
EXH
IBIT
ION
GU
IDE
Technical ProgramsDistributed onsite to all technical attendees, this piece reaches research and development professionals in different fields with news of your products and services. Most people will keep the program in hand during the event, providing you with an opportunity to gain visibility.
Exhibition GuidesDistributed to all attendees, this handy guide features exhibitor descriptions and show floor locations. Increase your impact on your primary target audience with an ad in the colorful Exhibition Guide.
Exhibition PreviewsThis pre-show piece mails to prospective exhibition visitors and course attendees approximately 8 weeks before the show. Feature your company’s newest products. Stand out from the other exhibitor listings, and let your customers know that you’ll be participating at the upcoming event.
Attend this unique marketplace for essential optical components, materials, devices, and more.
JOB FAIRSponsored by SPIE Career Center
Whether you’re looking for a better job, re-entering the workforce or just starting out, plan to visit the Job Fair at the SPIE Optics + Photonics exhibition. Come prepared to discuss your skills and talents with our industry leaders at this well attended two-day event.
PRODUCTS AND TECHNOLOGIES - Fiber Optics- Chemicals, Optical
Coatings, Thin Films- Nano-Precision Products
- Test and Measurement Equipment- Optical Components, Lenses- Detectors, Sensors- Cameras and Imaging Systems- Lasers, Laser Systems
180 COMPANIES
EXHIBITIONMeet top suppliers showcasing the newest products, innovations, and cutting-edge technologies. Discuss specific requirements face-to-face.
San Diego, California, USA
Exhibition: 13–15 August 2019
Conferences and Courses: 11–15 August 2019
4,000 ATTENDEES
3,000 PAPERS
37 COURSES AND WORKSHOPS
The optical sciences event that brings together
people and innovation.
FIVE New Courses offered:· Introduction to fundamental performance limits
of CCD and CMOS imagers (Janesick)· Optical measurement of surface topography
(de Groot)· Photodetectors – a practical selection guide (Piatek)· Mirror system design with freeform surfaces (Sasián)· Introduction to magnetic random access memory
(MRAM): Fundamentals, current status, and emerging device concepts (Khalili)
Course for Industry Professionals/Exhibitors: The Very Least You Need to Know About Opticsspie.org/opexhibit
COURSES
- Get essential training on core concepts in optical and systems engineering, optomechanics, deep learning, manufacturing, remote sensing, metrology, and more.
- SPIE Student Members get up to 60% off all courses.
Get face-to-face instruction from some of the leading names in research and industry. Take advantage of focused, efficient training that you can apply directly to your work.
Meet with representatives of the top companies in the optics industry.
www.spie.org/opexhibit
Non-
Profi
t Org
.U.
S. P
osta
ge
Paid
SPIE
P.O
. Box
10
Belli
ngha
m, W
A 98
227-
0010
USA
Optics + Photonics
EXHIBITIONPREVIEWMeet suppliers and discover new products at this free exhibition.
2019
San Diego Convention Center, San Diego, California, USA
Exhibition13–15 August 2019
Conferences + Courses11–15 August 2019
Op
tics
+ P
hoto
nics
20
19V
isit
th
e E
xhib
itio
n a
nd
see
ho
w t
he
late
st t
ech
no
log
ies
can
infl
uen
ce
your
nex
t p
rod
uct
or
pur
chas
e.
Exhi
biti
on 13
–15
Aug
ust
2019
Con
fere
nces
+ C
ours
es 11
–15
Aug
ust
2019
San
Die
go
Co
nven
tio
n C
ente
r S
an D
ieg
o, C
alifo
rnia
, US
A
Reg
iste
r to
day
fo
r th
e fr
ee e
xhib
itio
n
spie
.org
/op
exhi
bit
EXHI
BITI
ON
EXHI
BITI
ON
GUI
DE
TECH
NIC
AL
PRO
GRA
M
EST.
ATT
ENDA
NCE
2020 FEATURED EVENTS LOCATION CONFERENCE TOPICSFEBRUARY
San Francisco,California
Photonics West OPTO and LASE • Laser Sources • Nonlinear Optics and Beam Guiding • Micro/Nano Applications • Macro Applications • Optoelectronic Materials and Devices • Photonic Integration • Nanotechnologies in Photonics • MOEMS-MEMS in Photonics • Advanced Quantum and Optoelectronic Applications • Semiconductor Lasers and LEDS • Displays and Holography • Optical Communications: Devices to Systems • 3D Printing
22,000 • • •
BiOS • Photonic Therapeutics and Diagnostics • Neurophotonics, Neurosurgery, and Optogenetics • Clinical Technologies and Systems • Tissue Optics, Laser-Tissue Interaction, and Tissue Engineering • Biomedical Spectroscopy, Microscopy, and Imaging • Nano/Biophotonics • BRAIN • Translational Research • 3D Printing
7,000 •
San Francisco,California
Novel display engines and imaging systems (panel and scanners) • Combiner optics and related architectures (free space, lightguide, waveguide) • 3D display techniques, technologies and architectures (varifocal, multifocal, lightfield, holographic, volumetric) • Human perception and user experience in immersive displays • Optical sensors for eye, gaze, pupil and vergence tracking • Optical sensors for depth mapping and gesture sensing (stereo, structured illumination, TOF, etc.) • Optical sensors for 6DOF head tracking and SLAM-relocalization
3,000 • •
Houston,Texas
Physics of medical imaging • Image processing • Computer-aided diagnosis • Image-guided procedures, robotic interventions, and modeling • Molecular, structural, and functional imaging • Image perception, and technology assessment • PACS-based imaging informatics • Ultrasonic imaging, tomography, and therapy • Digital pathology
1,200 •
San Jose,California
Immersion • DFM/DPI • Nanofabrication and imprint • Resists • Etch • Lithography • Polarization • Metrology • Inspection • DUV and EUV sources and optics • Process control • Patterning
2,300 • • •MARCH
Strasbourg, France
Biophotonics • Micro/Nano technologies • Metamaterials • Photonic crystal fibers and devices • MEMS/MOEMS • Nanometrology • Optical sensors • Silicon photonics and photonic integrated circuits • Organic photonics • Solid-state lasers • Fiber lasers • Amplifiers • Photovoltaics • Photonics in automobiles • Image processing
1,900 • •
APRIL
Anaheim, California
Infrared applications • Laser and sensor technologies • Displays, guidance, and navigation • Modeling, simulation, and visualization • Signal and image processing • Sensor networks • Data mining • C3I, airborne reconnaissance, space and systems operations • Biometrics and aviation security • Forensic technologies • Unmanned vehicles • Metrology • Detectors and imaging devices • Nanotechnology • Organic materials • Plasmonics • Solid state lighting • Nonimaging systems • Photovoltaics • Organic LEDs • Alternate energy sources
4,500 • • •
Anaheim, California
Adaptive structures and mechanisms • Smart structures and vehicles • Actuators and damping • Biomimetics • Active materials • Embedded sensors • Sensor networks • Real-time NDE • Structural health monitoring • Fiber sensors
700 •JUNE
Yokohama, Japan
Optical, infrared, and millimeter wave and interferometry • Ultraviolet to gamma ray • Space and ground-based and airborne telescopes and instrumentation • Adaptive optics systems • Observatory operations • Modeling, systems engineering, and project management • Advances in optical and mechanical technologies • Millimeter, submillimeter, and far-infrared detectors and instrumentation • Software and cyberinfrastructure • High-energy, optical, and infrared detectors • Radio telescopes and telescopic arrays
2,500 • •
AUGUST
San Diego,California
Advanced metrology • Remote sensing • Optical system design • Illumination engineering • Photovoltaics • Solar hydrogen • Thin film coatings • Illumination systems • Solar concentrators • Plasmonics • Nanoengineered materials • Metamaterials • Nanocoatings • Nanomanufacturing • Organic photonics and electronics • Detectors and imaging • Photonics devices • OLEDs and LEDs • Lasers
4,300 • • •
SEPTEMBERCo-located Event
Atmospheric Sensing • Platforms and Systems • Environmental Monitoring and Applications • Earth Surface Sensing • Image and Signal Processing
900 • • •Strasbourg,France
Electro-Optical Sensing • Infrared Systems • Optical Materials and Technologies • Sensors and Networks • Millimetre Wave and Terahertz Sensors • Biomaterials
Monterey,California
EUV • Immersion • Nanoimprint • Direct write • Data prep and management • OPC and phase-shift masks • Design and process integration • Patterning • Design and data modeling • Defect inspection and repair • Mask yield and yield learning • Metrology • Maskless lithography
500 • •
Boulder, Colorado
Materials and measurements • Surfaces, mirrors and contamination • Thin Films • Fundamental mechanisms • Laser-induced damage issues • Applications of laser damage • Properties modeling • Testing • Component fabrication
155 •OCTOBER
Beijing,China
High-Power Lasers • Semiconductor Lasers • Optoelectronic Devices and Integration • Optical Design and Testing • Holography • Diffractive Optics • Biomedical Optics • Advanced Sensor Systems • Nanophotonics and Micro/Nano Optics • Plasmonics • Quantum and Nonlinear Optics
800 •
REACH THOUSANDS OF POTENTIAL CUSTOMERS WHO USE SPIE EVENT PIECES TO PLAN THEIR AGENDAS
SPIE Sales · [email protected] · Tel: +1 360 676 3290 · Fax: +1 360 647 1445
Contact: SPIE Sales Attn: Al Ragan, Teresa Roles-Meier or Melissa FarlowTel: +1 360 676 3290 Fax: +1 360 647 1445Email: [email protected]/advertising
4 AGREEMENT By signing, you agree to abide by the policies listed. (Hand-written signature required.)
2 SELECT ADVERTISEMENT For Photonics West/BiOS, please use corresponding Insertion Order.
1 PLEASE PROVIDE COMPLETE BILLING INFORMATION
Exhibition PreviewCover 2 Cover 3 Full Page Insertion Order Due
SPIE Defense + Commercial Sensing o $2,760 o $2,630 o $1,700 21 Dec 2019
SPIE Optics + Photonics o $2,760 o $2,630 o $1,700 23 Apr 2020
Materials are due 7 days after Insertion Order Due Date
o Technical Program or o Exhibition Guide
Ad Size Black & White 4-Color Special Position 4-Color
Full Page o $1,140 o $2,290 Cover 2 (Inside Front) o $3,540
2/3 Page o $900 o $2,000 Cover 3 (Inside Back) o $3,360
1/2 Page Vertical o $770 o $1,900 Cover 4 (Back Cover) o $3,680
1/2 Page Horizontal o $770 o $1,900 Page 3 o $3,220 Other righthand forward pages available upon
request.
1/3 Page o $560 o $1,690 Page 5 o $3,220
1/4 Page o $460 o $1,600 Page 7 o $3,220
3 SPECIFY ADVERTISEMENT SIZE
25604
SPIE EVENT ADVERTISING
2020 Insertion Order
SEE NEXT PAGE FOR: • MECHANICAL
REQUIREMENTS• ELECTRONIC FILE
REQUIREMENTS• AD SUBMISSION
GUIDELINES• POLICIES
[For office use only]
Date received ____________
Amt received ____________
oCC oCheck oWire
Check# _________________
OID# ___________________
IDN# ___________________
Technical Program Exhibition Guide Insertion Order DueSPIE Advanced Lithography o(LS) o 3 Jan 2020
SPIE Astronomical Telescopes + Instrumentation o(A4) 24 Apr 2020
SPIE Defense + Commercial Sensing o o 28 Feb 2020
SPIE Medical Imaging* o(LS) 27 Dec 2019
SPIE Optics + Photonics o o 23 June 2020
SPIE Photomask Technology + EUV Lithography o 3 Aug 2020
SPIE Photonics Europe o(A4) 15 Feb 2020
SPIE Security + Defence/Remote Sensing* o 3 Aug 2020
SPIE Smart Structures + Nondestructive Evaluation* o(LS) 14 Jan 2020*40% discount— Medical Imaging, Security + Defence/Remote Sensing, Smart Structures + Nondestructive Evaluation
4 PAYMENT INFORMATION (Billed after publication prints) Please check one of the following options:
o Check/Money Order enclosed (payable to SPIE) for entire amount. . . . . . . . . . . . . . . . . . . . . . . . . = $ ______________
o Credit Card. SPIE accepts VISA, MasterCard, American Express, Diners Club, and Discover cards.
o Wire transfer for entire amount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . = $ ______________ Bank wire transfer information will be sent to you.
o Please send invoice upon receipt of this contract.
Landscape Format (LS)
Portrait Format
o I have advertised with SPIE in the past 12 months. Please pick up my ad materials from: _____________________________
My company is an SPIE Corporate Member o No o Yes Corporate ID#________________________________________
Advertising Company _______________________________________________________________________________
Address __________________________________________________________________________________________
City ____________________________________________ State/Prov._____________ Zip ______________________
Contact _________________________________________ Title _____________________________________________
Telephone _______________________________________ Fax _____________________________________________
Email ___________________________________________ o Bill to Advertising Company (not Ad Agency)
Ad Agency ________________________________________________________________________________________
Address ___________________________________________________________________________________________
City ____________________________________________ State/Prov._____________ Zip ______________________
Contact _________________________________________ Title _____________________________________________
Telephone _______________________________________ Fax _____________________________________________
Email ___________________________________________ P.O. (if required for billing) __________________________
Ordered by ______________________________________ Title _____________________________________________
Authorizing Signature _______________________________________________________________________________
SPIE Sales · [email protected] · Tel: +1 360 676 3290 · Fax: +1 360 647 1445
Landscape Format (LS)
Portrait Format
MECHANICAL REQUIREMENTSTRIM SIZE Program will be cut to this size.BLEED SIZE Background imagery need to be larger than trim so it appears to go off the edge.LIVE AREA Keep all text and important elements inside live area so they do not get cut off when program is bound & trimmed after printing.
Exhibition Preview Full page ads only
TRIM: 6 × 10 1/2 in. = 152.4 × 266.7 mmBLEED: 6 1/4 × 11 in. = 158.75 × 279.4 mmLIVE: 5 × 9 1/2 in. = 127 × 241.3 mm
SPIE EVENT ADVERTISING
2020 Insertion Order
REMOVE PRINTER MARKS INCLUDING REGISTRATION AND CROP MARKS FROM
YOUR AD FILE
Technical Program LANDSCAPE FORMAT (LS): Advanced Lithography, Medical Imaging, Smart Structures
Full Page/Special Position TRIM: 11 × 8 1/2 in. = 279 × 216 mmBLEED: 11 1/2 × 9 in. = 292 × 229 mmLIVE: 10 1/2 × 8 in. = 266 × 203 mm
Ad Size Inches Millimeters
2/3 Page 6 3/4 × 7 1/4 171 × 184
1/2 Page 4 7/8 × 7 124 × 178
1/3 Page 3 1/4 × 7 1/4 82 × 184
1/4 Page 4 7/8 × 3 3/8 124 × 86
Technical Program PORTRAIT FORMAT: Defense + Commercial Sensing, Optics + Photonics, Photomask Technology + EUV Lithography
Exhibition Guide PORTRAIT FORMAT: Advanced Lithography, Defense + Commercial Sensing, Optics + Photonics, Optifab
Full Page/Special Position TRIM: 8 3/8 × 10 3/4 in. = 213 × 273 mmBLEED: 8 3/4 × 11 1/8 in. = 222 × 283 mmLIVE: 7 × 10 in. = 178 × 254 mm
Ad Size Inches Millimeters
2/3 Page 4 9/16 × 10 115 × 254
1/2 Page Vertical 3 5/16 × 10 84 × 254
1/2 Page Horizontal 7 × 4 7/8 178 × 124
1/3 Page Vertical 2 3/16 × 10 56 × 254
1/4 Page 3 5/16 × 4 7/8 84 × 124
ELECTRONIC FILE REQUIREMENTS• AD SHOULD BE FURNISHED AS A HIGH-RESOLUTION
PDF (at least 300 dpi). Fonts must be embedded, outlined, or included. All colors should be CMYK builds. Note: eps, jpg, and tif files will be accepted but PDF IS PREFERRED.
• Keep essential matter of an ad (text or image) inside the live area or 1/4” inside TRIM.
• PLEASE REMOVE ALL PRINTER MARKS INCLUDING REGISTRATION AND CROP MARKS FROM YOUR AD FILE.
AD MATERIAL SUBMISSION GUIDELINES• Ads can be emailed (files <5 MB may be
emailed to [email protected])• Please contact [email protected] with
questions about ad submissions.
POLICIES• Changes or modifications to submitted ad materials
may be subject to production charges.• SPIE does not guarantee reproduction quality for
late ads or ads that do not meet the Mechanical and Electronic File Requirements.
• Ad materials are stored for 12 months, unless other arrangements have been made in writing.
• No refunds on ads cancelled after Insertion Order Due dates.
• No guaranteed ad placement other than accepted special cover positions.
• SPIE reserves the right to cancel or reject any advertisement; this includes solicitation by organizations for membership and event attendees, authors or exhibitors, or products unrelated to the event.
• Simulation of the publication’s format is not permitted.• SPIE reserves the right to place the word
“advertisement” with copy that, in the publisher’s opinion, resembles editorial matter.
• All advertising is subject to publisher’s approval and agreement by the advertiser and agency to indemnify and protect the publisher from and against any claims, loss, liability, or expense, including reasonable attorney’s fees, arising out of publication of such advertisement.
• Ads received after the Materials Due dates are subject to a 10% surcharge.
• Recognized ad agencies will receive a 15% commission. Commissions given to ad agencies will be forfeited if payment is not received within 60 days of invoice date.
• Account delinquency may affect advertiser’s and agency’s ability to book space in future issues.
• For accounts with more than one unpaid invoice, all cash received will be paid to oldest invoice first.
• Advertiser and agency agree to pay all collection costs that result from our collection efforts on delinquent balances, including reasonable attorney’s fees.
LIABILITYThe publisher reserves the right to hold the advertiser and advertising agency jointly liable to SPIE for payments due hereunder. The advertiser is at all times liable for payment of all account balances due and all other liabilities and deemed to receive refund payments, adjustments, notices and all other documents when the same are delivered to their advertising agency. Payments by the advertiser to the advertising agency for services does not constitute payment to SPIE. Any language to the contrary in any advertising agency’s insertion orders or other documents is void and without effect.
BILLING AND DISCOUNTS• Billing and tear sheets will be mailed after the piece
has been published. Payment must be made to SPIE within 30 days of invoice date. After 30 days, a 5% late fee will be added to all unpaid balances.
• Multiple ad placements per event receive a 10% discount for each additional ad.
• SPIE Corporate Members receive a 15% discount on published rates.
Technical Program A4 SIZE: Optics + Optoelectronics
Exhibition Guide A4 SIZE: Optics + Optoelectronics
Full Page/Special Position TRIM: 8.27 × 11.69 in. = 210 × 297 mmBLEED: 8.77 × 12.19 in. = 223 × 310 mmLIVE: 7.27 × 10.69 in. = 185 × 272 mm
Ad Size Inches Millimeters
2/3 Page 4.75 × 10.69 121 × 272
1/2 Page Vertical 3.5 × 10.69 89 × 272
1/2 Page Horizontal 7.27 × 5 185 × 127
1/3 Page Vertical 2.25 × 10.69 57 × 272
1/4 Page 3.5 × 5 89 × 127
A4 Size