spinner rotating solutions - コムクラフト · pdf filefiber optic rotary joints spinner...
TRANSCRIPT
HIGH FREQUENCY PERFORMANCE WORLDWIDEwww.spinner-group.com
Fiber Optic Rotary Joints
SPINNER Rotating Solutions
Edition C/2016
2
Fiber Optic Rotary Joints
Customized Fiber Optic Rotary Joints
The SPINNER FORJ Portfolio allows flexible adoption
to your requirements such as:
• Special fibers
• Extended fiber length
• Up to 52 channels
• Extended wavelength range
• Particular labeling
• Adapted flange concept
• Mixed fibermode assembly, e.g. mulit-mode and
single-mode fiber, in multi-channel FORJ
• Customized insertion loss values
• Insertion loss bands over different channels
• Special outgoing goods inspections with measure-
ment of specific parameters
Feel free to configure your product with the according
order numbering nomenclature for single-channel
FORJ on page 6 and multi-channel FORJ on page 9.
Please let us know your requirements beyond!
SPINNER is one of the leading manufacturers for high performance rotary joints worldwide. In particular fiber optic
rotary joints require a high quality optical and mechanical fabrication environment. This qualifies SPINNER as integral
supplier for fiber optic rotary joints. We provide the precision mechanics and all the optical parts from a single source.
Beyond this, SPINNER can offer combinations of fiber optic rotary joints together with RF rotary joints, non-contacting
power transmission modules, slip rings, media joints or non-contacting data transmission. In particular, SPINNER
focuses on the combination of data and power transmission solutions with small form factor.
Benefits of Fiber Optic Connection
Digital Data Transmission:
• Up to 40 Gbit/s per channel
• Wavelength Division multi-plexing (WDM) allows
transmission of multiple data channels over one
fiber optic link
• High-grade configurability
Analogue Signal Transmission:
• High sensitivity
• Short-haul systems
Fiber Optic Sensors:
• Robust sensors in a widespread field of applications
EMI free signal transmission
• Optical fiber technology offers an excellent
solution to overcome EMI problems
3
Fiber Optic Rotary Joints
Optical Performance Parameter
• Low insertion loss
• High return loss values
• Low variation over rotation
Optical Parameter Tracking over Rotation
• Narrow insertion loss band across all channels of
a multi-channel fiber optic rotary joint
Fiber Type
• Single-mode E9/125 µm
• Multi-mode G50/125 µm (also G62.5/125 µm)
• Specialized fibers possible e.g. for high
temperature application or large core fibers
Environmental Conditions
• IP code protection for harsh environmental
applications
• High temperature capability for implementation in
RF systems
• Hydrostatic pressure capability for deep-sea appli-
cations
Connector type Polish Single-
ModeMulti- Mode Comment
FC PC/UPC/APC x x standard
SC PC/UPC/APC x x
ST PC/UPC x x
LC PC/UPC/APC x x standard
LSA PC/UPC/APC x x
LuxCis PC/UPC/APC X x harsh environment
Molex/LC PC/APC x x harsh environment
Stratos S900 n/a x x Expanded
Beam
Pro Beam n/a x x Expanded Beam
Fiber Optic Core Features
All Fiber Optic Components are Manufactured in Clean Room Environment ISO Class 7
4
Fiber Optic Rotary Joints
SPINNER FORJ Single-Channel
14
0,1
Ø
(9,3)(7,8) (7,5)
2,5
driving device
driving device
9(Ø
)
A rotational gap
long termbend radius> 30 mm
long termbend radius> 30 mm
FO-connector FO-connector
(L1±100) (L2±100)
12
3x thread M1.4x0.3 / 2,7 deep6
In A
rbei
t
SPINNER FORJ 1.14
The SPINNER FORJ 1.14 demonstrates highest
performance at most compact dimensions in
SPINNER’s single-channel family. A superior design
allows typical insertion loss values below 1.0 dB with
single-mode fibers. The compact dimensions of this
design combined with a low weight of 18 g enables
rotation speeds of 10000 rpm and beyond. The
SPINNER FLEXIFLANGE allows easy adaptation of
this rotary joint to your missions!
SPINNER FORJ Single-Channel Specification for Single-Mode (SM) and Multi-Mode (MM) Fiber
SPINNER FORJ 1.14 1.17/ 1.17pc*) 1.22
Insertion Loss max. 1.0 dB (SM) 1.5 dB (SM) / 2.5 dB (MM) 2.0 dB (SM) / 3.0 dB (MM)
Insertion Loss variation over rotation max. 0.5 dB 1.0 dB 1.0 dB
Return Loss max. 50 dB (SM) **) 50 dB (SM) **) 50 dB (SM) **)
Wavelength 1310 nm / 1550 nm (SM) or 850 nm / 1300 nm (MM)
Rotation speed 3000 rpm 60 rpm 1000 rpm
Weight (excl. connectors) 18 g 60 g 130 g
Torque 0.06 Nm 0.3 Nm 0.3 Nm
Degree of protection IP54 IP68 *) , seawater resistant IP65
Recommended temperature range -40 °C to +85 °C (Buffered Fiber ) / -40 °C to +71 °C (Protective Tube)
*) 1.17pc, IP 68 up to 4500m operational depth **) not applicable for MM
SPINNER FLEXIFLANGE allows easy adaption of
single-channel FORJs to your application. Just let us
know your flange requirements!
5
Fiber Optic Rotary Joints
L1 ±100 L2 ±100
FO-connector FO-connector
driving device mounting panelor flange
top
botto
m
12.9
- 0.1
Ø
22- 0
.05
Ø
A 12.9
- 0.1
Ø
long term bendradius >50mm
(3.5)
350.5
long term bendradius >50mm
13 0.1+
driving device 120°
120°
18.3
3x M2,5 / 4 deeptigthening torque 30 to 35 Ncm
0,2 A
rotational gap
In A
rbei
t
SPINNER FORJ 1.22
For rough environments in industrial applications
SPINNER FORJ 1.22 is protected with IP 65 against
dust and humidity. The protective fiber tubing safes
fibers during handing in the assembly process.
SPINNER FORJ 1.17 / 1.17pc
The SPINNER FORJ 1.17 is designed for roughest
environments and can withstand highest vibration and
shock requirements as well as humidity combined
with seawater. This design is derived from the needs
of offshore and under water vehicle industries and IP
68 rated. As special feature we provide this single-
channel rotary with pressure compensation for your
deep sea applications down to 4.500 m as SPINNER
FORJ 1.17pc.
L1 ±100 L2 ±100
FO-connectorFO-connector
driving device
long termbend radius > 60mm
long termbend radius > 60mm
6
130.1driving device hex.
(11.9)
(29.4)(41.6)
17
0.06
Ø16.6
0.2
Ø
(6) clamping range
(4)
Ø
(5)
(7.7)
(5)
(4)
Ø
In A
rbei
t
6
Fiber Optic Rotary Joints
Example: RO01-FM-FCP-1515-P [SPINNER FORJ 1.17, Ø 17 mm I-Type - FC-PC connectors – 1.5 m fiber lengths for L1 and L2 – fiber protective sleeve]
Rotary JointFiber Optic
Channel Count
Housing Type
Fiber Type Connectors PolishLength L1
Length L2
Extra Feature
Customer Specific UID
R O 01 - X Z - XX Z - XX ZZ - X XX
Blank if not applicable
Filled in by SPINNER
Ø 22 mm (I-Type) IP65 E Any of below listed combinations possible.
Please note different polish types for
Single-Mode and Multi-Mode fibers.In case of Stratos
S900, blank for polish.
Ø 17 mm (I-Type) IP68 F
Ø 14 mm (I-Type) IP54 G
Single-Mode E9 / 125 S
Multi-Mode G50 / 125 M
Multi-Mode G62.5 / 125 N
Connector TypePolish Multi- Mode
Polish Single- Mode
FC PCUPC, APC, PC
FC
SC PC APC, PC SC
ST PC PC ST
LC PC UPC, PC LC
LSA PC UPC, PC LS
LuxCis PC APC, PC LX
Molex/LC PC PC ML
Stratos S900 N/A N/A S9
PC P
APC A
UPC U
Length in 1/10 meter [0.2 … 4 m] longer fiber length on request
Length in 1/10 meter [0.2 … 4 m] longer fiber length on request
Fiber protective tube, standard: 2.7mm OD, Kevlar (up to 20 fibers) P
High Temperature Fiber H
Fiber protective sleeve AND High Temperature fiber T
Pressure compensated / oil filled (housing type Ø 17 mm only) O
Customer specific unique identifier
Feel Free to Configure your SPINNER FORJ Single-Channel with the Ordering Number Nomenclature :
SPINNER FORJ 1.17 / 1.17pc designed for the communication link to ROVs down to 4.500m operational depth.
7
Fiber Optic Rotary Joints
top
botto
m
109,41
39,5 f7 (- 0,050,025- )Ø
L1 ±150
FO-connector
driving device
FO-connector
L2 ±150
rotational gap
36
0,1 3,24x
0,2 A
46,8
54 0,2
A
(64,4)
8,80,2
driving device
25(Ø
)25(Ø
)
long term bendradius > 30 mm long term bend
radius > 30 mmIn A
rbei
t
The SPINNER multi-channel rotary joints use a dove
prism for de-rotating an image of the input fiber to
allow coupling to the output fiber. On each single light
propagation path SPINNER relies on discrete mounted
collimators for channel counts up to 20, rather than
applying an optical lens array. This technology allows
individual adjustment and optimization of insertion
loss values for each optical fiber channel. The result
is a superior optical parameter tracking performance
amongst optical channels over rotation.
SPINNER FORJ Multi-Channel
18,6
(Ø)
rotational gap
18,6
(Ø)
12
FO-connector
L2 ± 150
28,7
28h7
( - 0,0
21
)
Ø
88,41
(26,7)
long termbend radius> 30 mm
49
L1 ± 150
driving device
clamping range
long termbend radius> 30 mm
FO-connector
In A
rbei
t
SPINNER FORJ 2.28
With the dual channel SPINNER FORJ 2.28 we meet
the demand for a pure two channel single-mode rotary
joint. The patented mechanics give a compactness
with a total length of just less than 90 mm and an
SPINNER FORJ x.40
The SPINNER FORJ x.40 provides a market leading
compactness for multi-channel solutions up to
6 channels and comes with an outer housing diameter
of only 39.5 mm. It is available in single-mode and
multi-mode fiber configuration as well as the mixed
fibermode assembly.
0
0,2
0,4
0,6
0,8
1
1,2
1,4
1,6
1,8
2
0,00 180,00 360,00 540,00 720,00
IL [d
B]
angle [deg]
CH1
CH2
CH3
CH4
CH5
CH6
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
IL (d
B)
Angle (deg)
CH1
CH2
CH3
CH4
CH5
CH6
0 180 360 540 720
outer diameter of only 28 mm. Moreover, we provide
with this flexible design options for a pure multi-mode
or combined assembly of single-mode and multi-
mode fibers.
SPINNER FORJ Multi-Channel Specification with Discrete Lens Technology for Single-Mode (SM) and Multi-Mode (MM) fiber
SPINNER FORJ 2.28 x.40 x.60 x.65
Channel Count 2 3-6 7-20
Insertion Loss max. 4.5 dB (SM) / 6.0 dB (MM) 3.5 dB (SM) / 3.5 dB (MM) 3.5 dB (SM) / 5.5 dB (MM)
Insertion Loss variation over rotation max.
1.5 dB 1.5 dB 1.5 dB
Return Loss 50 dB (SM) *) 50 dB (SM) *) 50 dB (SM) *)
Wavelength 1310 nm / 1550 nm (SM) or 850 nm / 1300 nm (MM)
Fiber type Single-Mode E9/125 or Multi-Mode 50/125 or Multi-Mode 62.5/125
Rotation speed 150 rpm 1000 rpm 150 rpm 30 rpm
Weight (excl. connectors) 250 g 700 g 1500 g
Torque 0.08 Nm 0.15 Nm 0.15 Nm
Degree of protection IP54 IP54 IP54 IP65, Seawater Resistant
Recommended tempera-ture range
-40 °C to +85 °C (Buffered Fiber ) / -40 °C to +71 °C (Protective Tube)
*) not applicable for MM
8
Fiber Optic Rotary Joints
117,2±1(SM)114,2±1 (MM)L1 ± 150
FO-connector
rotational gap
FO-connector
55,6
4x thread M2,5 / 4,5 deep
L2 ± 150
420,1
(12,5)
(24,5) (SM)(23) (MM) (68,238)
0,2 A
driving device
60f7
( - 0,0
60,
03-
)
botto
m
top
long term bendradius > 30 mm long term bend
radius > 30 mmA
33(Ø
)
33(Ø
)
In A
rbei
t
SPINNER FORJ x.65
Where roughest environments do matter SPINNER
FORJ x.65 withstands highest vibration and shock
requirements as well as humidity combined with
seawater. This design is derived from the needs of
offshore and military industries and is IP 68 rated.
With this design we support up to 52 channels in
single-mode and multi-mode fiber configuration as
well as the mixed fibermode assembly for channel
counts up to 20.
SPINNER FORJ x.60
For multi-channel applications beyond 6 channels SPINNER FORJ x.60 covers the full range from 7 up to 52 channels.
We provide this again in single-mode and multi-mode fiber configuration as well as the mixed fibermode assembly.
L1 ± 150
FO-connectorFO-connector
L2 ± 150
(11,9)(17,3)
(72,8)
driving device
65
- 0,0
5
botto
m
top
154,61
(38,7)(43,4)
(21,
75)
Ø
(38)
Ø
long term bendradius > 60 mm
(8)
(38)
Ø
(21,3)
58 0,05
6,50,1
66
0,05
Ø
driving device
long term bendradius > 60 mm
87 0,1
76 0,3
(8)
6,5
0,1
In A
rbei
t
9
Fiber Optic Rotary Joints
Rotary Joint
Fiber Optic
Channel Count
Housing Type
Fiber Type Connectors PolishLength L1
Length L2
Extra Fea-ture
Customer Specific UID
R O NN - X Z - XX Z - XX ZZ - X XX
Blank if not applicable
Filled in by SPINNER
Ø 65 or 60 mm [07 … 52]
Ø 40 mm [03 …06] Any of below listed combinations
possible. Please note different polish
types for Single- Mode and Multi-
Mode fibers.In case of Stratos S900, blank for
polish.
Ø 28 mm [02]
Ø 65 mm (I-Type) IP65 A
Ø 60 mm (I-Type) IP54 B
Ø 40 mm (I-Type) IP54 C
Ø 28 mm (I-Type) IP54 C
Single-Mode E9 / 125 S
Multi-Mode G50 / 125 M
Multi-Mode G62.5 / 125 N
Connector TypePolish Multi-Mode
Polish Single-Mode
FC PC UPC, APC, PC FC
SC PC APC, PC SC
ST PC PC ST
LC PC UPC, APC LC
LSA PC UPC, APC LS
LuxCis PC APC, UPC LX
Molex/LC PC PC ML
Stratos S900 N/A N/A S9
PC P
APC A
UPC U
Length in 1/10 meter [0.2 … 4 m] longer fiber length on request
Length in 1/10 meter [0.2 … 4 m] longer fiber length on request
Fiber protective tube, standard: 2.7mm OD, Kevlar (up to 20 fibers) P
High Temperature Fiber H
Fiber protective sleeve AND High Temperature fiber T
Pressure compensated / oil filled (housing type Ø 17 mm only) O
Customer specific unique identifier
Example: RO12-BS-FCA-2010-P [SPINNER FORJ 12.60, I-Type Ø 60 mm - FC-APC connectors – 2.0 m fiber length for L1, 1.0 m fiber length for L2 – fiber protective sleeve]
Feel Free to Configure your SPINNER FORJ Multi-Channel with the Ordering Number Nomenclature :
SPINNER FORJ x.65, IP65 and seawater resistant, designed for Tether Management Systems in offshore application.
10
Fiber Optic Rotary Joints
Application – UAV and Military Radar System
The SPINNER FORJ 1.14 is designed for low profile,
minimum weight and rough vibration and shock
environments. These FORJ is typically integrated in
airborne targeting systems of UAVs, aircrafts or
helicopters.
SPINNER FORJ enables in goundbased and mobile
military radar systems the handling of the massive
data transfer between the rotating antenna and the
processing unit down in the shelter. For this appli-
cation SPINNER combines multi-channel FORJ with
RF rotary joints, slip rings and media joints to deliver
power and cooling liquid to the antenna.
SPINNER FORJ 1.14
SPINNER 12 Channel FORJ with X-Band Waveguide
11
Fiber Optic Rotary Joints
Application – Wind Power and Weather Radar
In wind power stations, SPINNER FORJ 1.22 with
IP65 rating increases the reliability in 24/7 operations.
Where in current designs slip rings for data trans-
mission can increase down-times and maintenance
cost, the SPINNER FORJ 1.22 enables highest
reliablity for data transmission up to data rates of
several Gbit/s. As an additional feature we provide
SPINNER FORJ 1.22 in combination with digital
contactless transmission systems.
For weather radar systems, SPINNER combines
FORJs typically with single and dual channel RF
rotary joints for frequency ranges in S-, C- and X-band.
Where in current weather radar systems a slip ring
transfers data to the antenna side, the SPINNER
FORJ brings data rates of several Gbit/s with highest
reliability to weather radar systems around the globe.
Ethernet with SPINNER FORJ 1.22
SPINNER FORJ for Weather Radar
12
Fiber Optic Rotary Joints
Application – 4K / 8K Video Transmission over 360°
The miniature slip ring FORJ combinations of SPINNER
with diameters down to 22mm, enable interference-
free data communication at video applications in 4K
and 8K quality – even in fast-moving images. The
small slip ring diameter paired with SPINNER FORJ
1.14 is the perfect match for low profile applications
as it safes the critical fiber bending radius in addition
to the unit lenght. That’s why manufacturers of
cutting edge cameras relay on SPINNER for cable-
suspended camera systems.
SPINNER FORJ 1.14
13
Fiber Optic Rotary Joints
Application – Revolving Stage
Single- and multi-mode fiber optic rotary joints from
2 to 20 channels are used wherever digital signals with
multi-plexing method is not tolerable. This might be
the case for high performance transmission of several
phased signals in radar applications, where errors
due to A/D conversion are inacceptable. Another
application is the usage due to a good value-cost
ratio: In SPINNER FORJ 2.28 channels are transmitted
separately, i.e. there is no need of complex active
multi-plexing technology for each channel. As example,
this is interesting for revolving stages in theaters on
ocean cruisers in combination with power slip rings.
SPINNER FORJ 2.28
14
Fiber Optic Rotary Joints
Application – Industrial Automation
Fiber Optic Channel Characteristics
Interface type / material FC/PC - adapter / copper alloy
Fiber type E9/125 single-mode
Wavelength [nm] 1310 / 1550
Return loss, min. / typ. 30 dB / 37 dB
Insertion loss, max. 8 dB
Insertion loss, WOW max. 3 dB
Optical power, max. 200 mW / 23 dBm
DC Power Transmission Channel Characteristics
Input voltage 21.6 to 27.6 V DC
Output voltage 24 V DC ±3 %
Output current, continuous 1.5 A
For 24/7 long lifetime applications that require DC power and a high
data throughput, SPINNER provides a fully non-contacting rotary
joint system. With a compact form factor integrating the fibre optic
channels into the DC Power module with rotation velocities up to
3000 rpms. This hybrid rotary joint is typically implemented into
high end imaging systems and industrial machining applications.
The fibre optic transmission channel provide the highest flexibility
with communications protocols and data channels enabled by
wavelength division multi-plexing (WDM) technologies. As an addi-
tional advantage of the new system, SPINNER has implemented
FC/PC – adapters instead of flying cables. This allows ease of inte-
gration in rough environments without handling of sensitive optical
fibers and possibility to choose connecting fiber types.
The nominal output voltage of this system is 24 V DC, however the
applied technology allows flexible adoption to higher or lower
voltage and current.
SPINNER FORJ with Contactless Power
15
Fiber Optic Rotary Joints
Part Number BN 549706
Interface type / material F-SMA-f / cooper alloy
Wavelength [nm] 400 - 2000 (depends on used fiber)
Insertion loss, max. 2.0 dB (with 200 µm core fiber patch cables)
Insertion loss, WOW max. 0.5 dB (with 200 µm core fiber patch cables)
Ambient temperature range operation -32 °C ... +71 °C
Ambient temperature range storage -40 °C ... +85 °C
Application – Life Science
Life Science is an emerging field of science and
industry, which deals with processes and structures of
living organisms. It shows a strong relationship also to
biotechnology and medical applications. In particular,
it is a very interdisciplinary field of science. In several
applications fiber optic rotary joints are necessary, e.g.
optical coherence tomography in endoscopes. Also the
field of optogenetics, where light is applied at diffe rent
wavelengths to light-sensitive proteins in order to modify
cell ortissue performance, uses fiber optic rotary joints.
With research con ducted on freely moving mammals,
the correspon ding light output is applied in-situ via a
glass fiber. To ensure that the freedom of movement is
not limited, rotary joints are the optimal solution. Another
application is support of equipment on rotable heavy
duty arms, where a rotary joint is involved.
As an established supplier to the world of medical
technology, for this application, SPINNER provides a
robust, cost-effective and easy-to-use rotary joint with
F-SMA or FC/PC connections for large core fi bers with
a core diameter starting from 200μm – BN 549706 for
wavelength of 400 nm up to 2000 nm. This rotary joint
stands out due to its small operating torque and small
insertion loss variation during rotati on. Due to the
design as a coupling joint a maximum configurability
is possible, which means the user is for himself able to
decide on which optical fiber type is used. The rapid
changing of the fiber cable also enables the rapid
changing of the test subject, as well as being able to
continue to use the rotary joint with a different fiber
standard at a later point in time.
One of our new products is a single-mode FORJ for
wavelength of 450 nm. This can be used for different
applications, e.g. for free moving mammals connected
to an optical single-mode fiber.
For the endoscopes we developed a high speed
rotary joint, which allows to rotate up to 10000 rpm
and beyond.
Data subject to change without notice
Certified according to DIN EN ISO 9001 / 14001
3.0/
RS
/03.
2016
HIGH FREQUENCY PERFORMANCE WORLDWIDESPINNER designs and builds cutting-edge radio frequency systems, setting performance and longevity standards for others to follow. The company's track record of innovation dates back to 1946, and many of today's mainstream products are rooted in SPINNER inventions. Industry leaders continue to count on SPINNER's engineering excellence to drive down their costs of service and ownership with premium-quality, off-the-shelf products and custom solutions. Headquartered in Munich, Germany, the global frontrunner in RF components remains the first choice in simple-yet-smart RF solutions.
www.spinner-group.com
SPINNER GmbH
Erzgiessereistr. 33
80335 München
GERMANY
Tel.: +49 89 12601-0
Fax: +49 89 12601-1292
www.spinner-group.com
SPINNER Austria GmbH
Triester Str. 190
1230 Wien
AUSTRIA
tel.: +43 1 66277 51
fax: +43 1 66277 5115
SPINNER Electrotécnica S.L.
c/ Perú, 4 – Local n° 15
28230 Las Rozas (MADRID)
SPAIN
tel.: +34 91 6305 842
fax: +34 91 6305 838
OOO SPINNER Elektrotechnik
Kozhevnicheskaja str. 1, bld. 1
Office 420
115114 Moscow
RUSSIA
tel.: + 7 495 6385 321
fax: + 7 499 2353 358
SPINNER France S.A.R.L.
24 Rue Albert Priolet
78100 St. Germain en Laye
FRANCE
tel.: +33 1 74 13 85 24
SPINNER ICT Inc.
5126 S. Royal Atlanta Drive
Tucker, GA 30084-3052
USA
Tel.: +1 770 2636 326
Fax: +1 770 9343 384
SPINNER Nordic AB
Kråketorpsgatan 20
43153 Mölndal
SWEDEN
tel.: +46 31 7061670
fax: +46 31 7061679
SPINNER Telecommunication
Devices (Shanghai) Co., Ltd.
351 Lian Yang Road
Songjiang Industrial Zone
Shanghai 201613
P.R. CHINA
tel.: +86 21 577 45377
fax: +86 21 577 40962
SPINNER UK Ltd.
Suite 8 Phoenix House
Golborne Enterprise Park,
High Street
Golborne, Warrington
WA3 3DP
UNITED KINGDOM
Tel.: +44 1942 275222
Fax: +44 1942 275221