spiral,stair,model stair stringers in tekla

Download Spiral,Stair,Model Stair Stringers in Tekla

Post on 03-Jun-2018

308 views

Category:

Documents

5 download

Embed Size (px)

TRANSCRIPT

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    1/24

    Park Engineering John Park, 32 the Loaning, Motherwell, North Lanarkshire, Strathclyde,Scotland, U.K. ML1 3HE

    tel. & fax. 01698 263756 mobile 0781 8618547 "e" mail jpark8@btinternet.com (click on this to send me an "e" mail)

    this web site www.3d-cad-steelwork.com

    Home / Index

    all my comedystuff.htm

    GlasgowHumour.htm

    Cad Projects

    Client List

    CompanyProfile

    Downloads

    My C.V.

    Jokes &Cartoons

    Favourite links

    FrequentlyAsked Questions

    Hardware andSoftware

    CustomerFeedback

    Model Stair Stringers in Tekla

    I have found this the best way. It's very similar to the way I would do it in 2D c

    1) Draw in grids as shown plus on plan for outside of stringers.2) Set x.y.z to their standard direction. Pick FLT10*200 set ends offset to -200 100 and right, front, froOn elevation draw in flat from point A to B. Move stringer up by 12 mm3) Check position in plan. I like to put the st ringers on the inside of the grid lines.4) Trim top of stringer back 10 mm with vertical cut line.5) Apply con 103 fin plate to top. Remember you have to play about to get it flushwith top of pfc. Put fin plate to inside of stringer. Line cut stringer flush with top of pfc.6) Cut 2 planes with line cut at base. Insert flat bar column. Do a con.1042 to put base on flat column.Explode base con. Remove column and weld plate to stringer. No need to do this Tekla have just advisethat con 1038 will do this ie put a base plate on stringer.7) Mirror stringer with base plate to other grid line. One can now draw in the treads.8) Next I intend to draw in one 65x6 flat bar end, cut chamfer & bolt group to stringer.

    9) draw in front 30x5 nosing. Call this the main part by welding 65x6 end plate to it.10) Make this into Custom Component - Detail so I can use on any job. Export to firm folder.11) I 'll explode then mirror 65x6 to other stringer. Adjust length of nosing flat and copy backwards.12) The nosing flat wouldn't attach to custom component. As the size and length changes it can be putin for each job. uel no. is g3.uel and it's in my firm folder after I exported it. After you click exportit goes to the current model folder and one has type in g3.

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    2/24

    PrintingServices

    Cad Tips

    Funny Pictures

    InterestingStories

    Bird Flu Humour

    Cheaper Car fuel

    Mostembarrassingmoments

    130 Year old Joke

    RecommendedBooks

    Jokes by type

    Park Family Tree

    Name and Shame

    Tekla ModelsSceenshots

    Weekly Rants

    Terms &Conditions

    Tekla StructuresHints & Tips

    MotherwellMasters SwimClub

    Computer andWeb Design

    The above sketch is taken from drawing ACW_01 Vietnam job. Treads are 275 mm wide 30x5 flat pitch

    Open Treads from plain plate, durbar and perforated plate.

    Go to profile catalogue>others pick BLZ insert these values BLZ280*100*5 this is assuming plate is 5 mOnce this is positioned correctly between stringers apply connection 116 with 50*50*6 rsa to both sidesMake sure the RSA Is symmetrical about centre of 280 mm size. Put a bit of transparency to the plate ifperforated. Go to elevation on stringer and make sure the view depths catch both stringers. Copy treadsend angles by going, riser and number of treads. Put a note on GA and detail drawings to say it's perfodurbar and the job is done. The screenshot is not quite correct as the leg depth of the front and back shinstruction above.

    Spiral Stair for info on this go to

    http://xsteeler.net/viewtopic.php?f=37&t=4089

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    3/24

    Hints and tips

    BritishHospitals -TrueStories.........

    work of theBonkle PoetWilliamMcCormack"Memories O'Hame" andother poems

    the poetamong otherthings Bill

    Baron IrvineModel Stair

    Stringers in Tekla

    ForbesGentleman

    Robert Burns'sAuld Lang Syne

    Tekla Structureshints and tipsworking indrawings

    Tekla AdvancedTopics.htm

    Tekla all mystuff.htm

    TeklaComponents myStandardconnections.htm

    ARC SteelCommercials.htm

    CalderFabrications.htm

    Aqua EnergyPaisley.htm

    James Cowie &Co. Ltd.htm

    CraigEngineerig.htm

    WeldonEngineerig.htm

    AnhopMetalwork.htm

    Used Tekla connections con 19 & 21 for spiral section on above stairs. It was a compete waste of timeproduce the detail drawings. I've done all other jobs in 2d autocad. JOB CAL.75 Dance Studio Calder Fa

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    4/24

    MansardRoof.htm

    Kenny Ball.htm

    Marti Pellow.htm

    wilbur,smith

    Kathy Kirby.htmBilly Fury.htm

    Petula Clark.htm

    GlasgowHumour.htm

    6 Flight stair for Calder Fabrications JOB CAL.91

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    5/24

    Tread detail 5 mm pressing. 50x50x6 rsa welded to flat bar stringers. Note countersunk headed bolts fcarpet type finish. I had to play about to get the countersink to show up. Ended up with the bolt settinstandard 8.8CSK Cut length 106 bolt distance X 170 POSITION middle 0.00 front 0.00 middle 64.63

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    6/24

    a simple two flight stair for Townhill Welding. Main contractor Balfour Beattie. Alterations to Royal Inf TOW.08

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    7/24

    Another imported .dwg tread which is bolted to stringer via 50x50x6 rsa's Durbar plate treads.

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    8/24

    Another job for Calder fabs. A block of flats in Camlon Falkirk. PFC Stringers. job CAL.86

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    9/24

    Pan treads. PFC stringers. Bolt heads covered with concrete infil. 40X40X5 RSA. Cleats welded to tread

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    10/24

    Weldon Engineering Grid Stairs for water treatment access areas. Job WEL.24-322

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    11/24

    25 x 5 grid. End plates 65x6. Rear flat can be increased in height for anti-slip through feature. 200x10handrailing are detailed.

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    12/24

    JOB MIL_02 Miller Construction Overtown

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    13/24

    job MIL_02 Welded in pan treads

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    14/24

    CVR Carmichael job no CVR_48 Invergorden

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    15/24

    stringers 200x90 pfc 50x50x6 rsa cleats. job CVR_48

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    16/24

    job CVR-39 Balfour Beattie Airdrie high School

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    17/24

    10 mm pan tread. 300x10 flat stringers. JOB CVR-39 dwg profile for tread.

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    18/24

    CV Carmichael for St Andrews Uni job CVR-28 Note the macro for the handrail post bases I think it's 28.

    Deep grid tread with rear anti-slip through plate 260x75 pfc stringers CVR-28 JOB

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    19/24

    NANDO'S ST ENNOCK'S CENTRE job ABW-01 existing columns

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    20/24

    JOB ABW-01 FLAT BAR STRINGERS I have just noted that the above holes were slotted on what looks lik

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    21/24

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    22/24

    CVR-6 SPIRAL Gibson Laing Lauriston street Edinburgh

    150 PFC Stringers inset from outside of treads CVR-6 TAPER PLATES Welded to treads

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    23/24

    Job COA-18 Coatbridge Engineering

  • 8/12/2019 Spiral,Stair,Model Stair Stringers in Tekla

    24/24

    Job COA-18

    for more stair design info go to

    http://stairdesignsoftware.net/

View more