splice-on connector multimode termination system · 2012-12-27 · fusion splicers a furukawa...
TRANSCRIPT
FUSION SPLICERS A Furukawa Company
Splice-On Connector MultimodeSplice-On Connector MultimodeTermination SystemSplice-On Connector MultimodeTermination System
FITEL’s new multimode (MM) connector termination system allows for unsurpassed performance and fl exibility in the fi eld. This “splice-on” connector (SOC) eliminates the need for fi eld polishing and signifi cantly improves the quality of the termination and installation time required. FITEL’s factory polished ferrules with pre-cleaved fi ber stubs are spliced onto the fi eld fi ber utilizing FITEL’s proprietary ferrule holder and fusion splicer. The connector is easily assembled by using a process that requires minimal skill or training. On top of that, no index matching gel or epoxy is required. These connec-tors are optimal for use in data center applications.
The solution is available for both conventional 50/125, 62.5/125 MM fi bers as well as Laser-Optimized OM-3 (50/125) Fiber.
Features and Applications• Simple, Fast, & Consistent Field Termination – Allows for easy fi eld
repair of pre-terminated splitters, fan outs, and drop terminals
• No Polishing or Epoxy – FITEL’s connector termination process requires no polishing or epoxy increasing the quality and consistency of fi eld con-nector termination. Total installation time is greatly reduced compared to traditional methods
• Fiber Management – The most diffi cult task for splicer operators has always been managing the fi ber upon completion of splicing. The connec-tor termination feature of the S123C, S153A and S178A Fusion Splicers eliminates the need for splice trays resulting in easier fi ber management, reduced storage requirements, and faster installation times
Splice-On Connector MultimodeSplice-On Connector MultimodeSplice-On Connector MultimodeSplice-On Connector MultimodeSplice-On Connector Multimode
FITEL’s new multimode (MM) connector termination system allows for unsurpassed performance and fl exibility in the fi eld. This “splice-on” connector (SOC) eliminates the need for fi eld polishing and signifi cantly improves the quality of the termination and installation time required. FITEL’s factory polished ferrules with pre-cleaved fi ber stubs are spliced onto the fi eld fi ber utilizing FITEL’s proprietary ferrule holder and fusion splicer. The connector is easily assembled by using a process that requires minimal skill or training. On top of that, no index matching gel or epoxy is required. These connec-
holder and fusion splicer. The connector is easily assembled by using a process that requires minimal skill or training. On top of
FITEL’s new multimode (MM) connector termination
quality of the termination and installation time required. FITEL’s factory polished ferrules with pre-cleaved fi ber stubs are spliced onto the fi eld fi ber utilizing FITEL’s proprietary ferrule holder and fusion splicer. The connector is easily assembled by
FITEL’s new multimode (MM) connector termination
FITEL’s factory polished ferrules with pre-cleaved fi ber stubs are spliced onto the fi eld fi ber utilizing FITEL’s proprietary ferrule holder and fusion splicer. The connector is easily assembled by
The solution is available for both conventional 50/125, 62.5/125
FITEL’s factory polished ferrules with pre-cleaved fi ber stubs are
The solution is available for both conventional 50/125, 62.5/125
FITEL’s factory polished ferrules with pre-cleaved fi ber stubs are SOC MM Connectors
SPECIFICATIONSParameter Description
Type SCPC (Conventional 50/125 and 62.5/125, as well as OM-3 50/125 MM fi bers)
Insertion Loss Typical 0.3 dB
Nominal Fiber OD 125 µm
Nominal Fiber Coatingor Fan-Out Tubing OD
900 µm
Materials Ferrule: Composite or ceramic
Housing Composite
Refl ectance -55 dB (+18° to +26°C)
Jacket Type 900 µm, 2 mm, 3 mm
SOC FIBER HOLDER INFOFor FITEL Fusion Splicers S178, S153, S123C/MDescription Connector Type Part #
Ferrule Holder
2 and 3 mm FC, SC S712C-SGS5-L
2 and 3 mm LC S712C-SGL5-L
900 µm FC, SC, LC S712C-FITSOC
Cordage Hoder 2 mm, 3 mm FC, SC, LC S712C-SGC5-R
S325 Cleaver
S123C FusionS123C FusionS123C FusionSplicer
RoHS
A Furukawa Company
Contact Us:
Fusion Splicer Customer Service,Training and Service Center Toll Free: 866-452-9516Phone: 678-783-1090Fax: 678-783-1093Email: [email protected]
OFS Corporate Headquarters2000 Northeast ExpresswayNorcross, Georgia 30071, USAToll Free: 888-Fiber-HelpIntl. Phone: 770-798-5555Email: [email protected]
For additional information please contact your sales representative. You can also visit our website at:
http://www.ofsoptics.com.
OFS reserves the right to make changes to the prices and product(s) described in this document at any time without notice.
This document is for informational purposes only and is not intended to modify or supplement any OFS warranties or specifi cations relating to any of its products or services.
Copyright © 2011 OFS FITEL, LLC.All rights reserved, printed in USA.
OFSMarketing CommunicationsFITEL-SOC-MM-0211
Use electronic fi les, available at:www.ofsoptics.com - Use less paper
This logo mark indicates that the products and services satisfy the standards of environ-mentally friendly products of the Furukawa Electric Group.
eFriendly Logo MarkOur company has confi gured the environmental management sys-tem at each of our plants world-wide, and acquired ISO 14001 certifi cation.
ISO 14001
EZ-Bend is a registered trademark of OFS FITEL, LLC.FITEL is a registered trademark of Furukawa Denki Kogyo Kabushiki Kaisha DBA The Furukawa Electric Co., Ltd Corporation.
S153 FusionS153 FusionSplicer
RoHS
AVAILABLE SPLICER INFOType ModelCore Alignment Machine S178A
Active Clad Align Machine S153A
Ribbon Splicing Machine S123M12
Clad Alignment Machine S123C
S178 FusionS178 FusionSplicer
ORDERING INFORMATIONPart Number DescriptionFIT-FC50SOC MMF FC/UPC 900um (50/125)
FIT-FC62SOC MMF FC/UPC 900um (62.5/125)
FIT-FCOM3SOC MMF FC/UPC 900um (OM3, Laser Optimized)
FIT-LC50SOC MMF LC/UPC 900um (50/125)
FIT-LC62SOC MMF LC/UPC 900um (62.5/125)
FIT-LCOM3SOC MMF LC/UPC 900um (OM3, Laser Optimized)
FIT-SC50SOC MMF SC/UPC 900um (50/125)
FIT-SC62SOC MMF SC/UPC 900um (62.5/125)
FIT-SCOM3SOC MMF SC/UPC 900um (OM3, Laser Optimized)
FIT-ST50SOC MMF ST/UPC 900um (50/125)
FIT-ST62SOC MMF ST/UPC 900um (62.5/125)
FIT-STOM3SOC MMF ST/UPC 900um (OM3, Laser Optimized)
SLCS-P2M1EB MMF LC/UPC 2mm (50/125)
SLCS-P2M2EB MMF LC/UPC 2mm (62.5/125)
SLCS-P2M3EB MMF LC/UPC 2mm (OM3, Laser Optimized)
SSCS-P2M1-EA MMF SC/UPC 2mm (50/125)
SSCS-P2M2-EA MMF SC/UPC 2mm (62.5/125)
SSCS-P2M3-EA MMF SC/UPC 2mm (OM3, Laser Optimized)
SSCS-P3M1-EA MMF SC/UPC 3mm (50/125)
SSCS-P3M2-EA MMF SC/UPC 3mm (62.5/125)
SSCS-P3M3-EA MMF SC/UPC 3mm (OM3, Laser Optimized) MMF SC/UPC 3mm (OM3, Laser Optimized) MMF SC/UPC 3mm (OM3, Laser Optimized)
S123M12 FusionS123M12 FusionS123M12 FusionSplicerSplicerSplicer
RoHS