spml permanent magnetic clamping blocks · spml permanent magnetic clamping blocks are equipped...
TRANSCRIPT
SPML permanent magnetic clamping blocks are equipped with two opposed, independently switchable clamping surfaces. The neody-mium magnet system with fine pole pitch 1.5+0.5 affects about 5mm deep and is ideal for clamping small and medium sized workpie-ces. The switching shaft can be actuated from two sides, so that the magnetic clamping block may also be used standing. Two M5 threads are located on the sides of the head on which stops or positioning can be attached. SPML clamping blocks are water-tight and especially suitable for grinding, wire and sinker EDM.
SPML Permanent magnetic clamping Blocks
Model Item-Nr. Dimension (mm) Polte pitch(mm)
Holding force (N/cm²)
Weight(kg)
Priceplus VATL B H
SPML 12 2302 01 125 52 50 1,5 + 0,5 80 2,5 278,-
SPML 12 Pair/ground togehter
2302 01-1125 52 50 1,5 + 0,5 80 2x2,5 528,-
SPML 18 2302 02 180 52 50 1,5 + 0,5 80 3,6 368,-
SPML 18 Pair/ground togehter
2302 02-1180 52 50 1,5 + 0,5 80 2x3,6 688,-
SPML 25 2302 03 250 52 50 1,5 + 0,5 80 5 478,-
SPML 25 Pair/ground togehter
2302 03-1250 52 50 1,5 + 0,5 80 2x5 988,-
Model Item-Nr. Dimension (mm) Pole pitch(mm)
Holding force (N/cm²)
Weight(kg)
Priceplus VATL W H
SPML 12 INOX 2302 06 125 52 50 1,5 + 0,5 60 2,5 338,-
SPML 12 INOX Pair/ground togehter
2302 06-1125 52 50 1,5 + 0,5 60 2x2,5 638,-
SPML 18 INOX 2302 07 180 52 50 1,5 + 0,5 60 3,6 458,-
SPML 18 INOX Pair/ground togehter
2302 07-1180 52 50 1,5 + 0,5 60 2x3,6 868,-
SPML 25 INOX 2302 08 250 52 50 1,5 + 0,5 60 5 578,-
SPML 25 INOX Pair/ground togehter
2302 08-1250 52 50 1,5 + 0,5 60 2x5 1088,-
Structure:Neodymium Magnetic System, Steel with best Magneticflux properties 2 separately switchable clamping surfacesTransverse pole pitch 1,5+0,5Holding force ca. 80 N/cm2
Magnetic Field height ca. 5mmAdmissible wear of pole plates ca. 3mm
Recommendation: precise, powerful clamping block for grinding, measuring and eroding.
Structure:Neodymium Magnetic System, stainless Steel2 separately switchable clamping surfacesTransverse pole pitch 1,5+0,5Holding force ca. 60 N/cm2
Magnetic Field height ca. 5mmAdmissible wear of pole plates ca. 3mm
Recommendation: precision, stainless clamping block for grinding, measuring, EDM and wire cutting
For use in aggressive media we recommend INOX
Also switchable on the back side
L
H
W