sponsors - web.aeromech.usyd.edu.auweb.aeromech.usyd.edu.au/wcsmo2015/documents/... · sponsors ....

Sponsors

Gold Sponsor

Silver Sponsors

June 7-12, 2015 3

Contents

Welcome Message 4

About the ISSMO and the WCSMO 5

Organizing Committees of WCSMO-11 7

ISSMO Executive Committee Election 10

Conference Program 11

Maps 12

Program Schedule 14

4 WCSMO-11

Welcome Message

On behalf of the International Society for Structural and Multidisciplinary Optimization (ISSMO), we warmly welcome

you all to the eleventh World Congress of Structural and Multidisciplinary Optimization held at the University of

Sydney, Australia from the 7th to 12th June, 2015.

As a top tier international society, ISSMO was founded in October 1991 by George Rozvany and has held the World

Congress of Structural and Multidisciplinary Optimization (WCSMO) biennially since 1995. Today is its 20th

anniversary since the first WCSMO was held in Goslar, Germany and organized by George Rozvany. In the

intervening years, every WCSMO has been held in different continents, and the width and scope of the research

presented has increased dramatically. We would like to thank all the delegates for joining the Sydney Congress and

trust that the experience in WCSMO proves interesting and enjoyable.

343 papers (167 with full-length papers) will be presented in verbal (317) or poster (26) form with topics ranging

from topology and shape optimisation to multidisciplinary optimisation. We hope that there is plenty of scope and

new development for discussion. The traditional State of the Art (SOTA) presentation on the Thursday afternoon will

be delivered by the invited specialists in emerging and topical issues and should provide plenty of discussion at the

congress dinner in the Great Hall of the University of Sydney.

Sydney is a young city being only 230 years old and it is still growing at a fast rate as you can see from the cranes

on the skyline. The Sydney harbour dominates the topology of the city and almost no straight streets were shaped

during its development. We believe that there is plenty to see and to do in Sydney during this congress week; and

for this reason we have created a programme allowing for plenty time to explore and time to network in addition to

oral and poster technical sessions. Following the Monday opening ceremony and technical sessions, you are invited

to the Congress reception via the harbour cruise in the evening of the 8th June – which is also the Queen’s Birthday

holiday in Australia and Sydney Vivid night, where you can see the spectacular night views of Sydney harbour. The

General Assembly will be held on the Tuesday afternoon which will deliver the reports from the ISSMO president,

Secretary General, Treasurer and SMO journal editor. Importantly, this general assembly will form the new executive

committee (EC) of ISSMO for the next four years. The Congress banquet will be held at the Great Hall of the

University of Sydney on the Thursday evening (11th June). For the traditional WCSMO excursion, we have arranged it

on the last day, thus the delegates will have the opportunity to experience being inside the Sydney Opera House, an

iconic landmark of Australia by either exploring the architectural design and structural engineering in the day visit;

or enjoy the Sydney Symphony Orchestra performance in the evening visit on Friday (12 June).

The conference venue, the University of Sydney, was the first university in Australasia and was founded in 1850.

Engineering has been taught here since 1882 and its many thousands of graduates have helped underpin the

growth and optimise the development of the nation. It is hoped that you will take the opportunity to explore the

University’s blend of modern and ancient buildings.

We would like to express our gratitude to all members of the committees involved in the organisation of this

Congress, to all the contributing authors and participants, and to all the fellow students and staff members in the

Secretariat, who helped create this Congress in Sydney. Also, we thank the sponsors listed on the previous page who

helped make this Congress a financial success.

Finally, we hope that you all will take the time to explore Sydney and meet as many new colleagues as possible and

remember the 11th WCSMO as a friendly experience.

Qing Li and Grant P. Steven

Co-Chairs of

WCSMO-11

Nam-Ho Kim

Chair of International

Papers Committee

Ole Sigmund

President of

ISSMO

Helder C. Rodrigues

Secretary General of

ISSMO

June 7-12, 2015 5

About the ISSMO and the WCSMO

The International Society for Structural and Multidisciplinary Optimization (ISSMO) was founded in

October 1991. Today ISSMO has almost one thousand members from more than 50 countries. The

objectives of ISSMO are:

to stimulate and promote research into all aspects of the optimal design of structures as well as

multidisciplinary design optimization where the involved disciplines deal with the analysis of

solids, fluids or other field problems;

to encourage practical applications of optimization methods and the corresponding software

development in all branches of technology;

to foster the interchange of ideas amongst various fields contributing to structural and

multidisciplinary optimization;

to support the role of optimization in multidisciplinary design;

to provide a framework for the organization of meetings and other means for the dissemination

of knowledge on structural and multidisciplinary optimization; and

to promote teaching of structural and multidisciplinary optimization in tertiary institutions.

One of the aims of ISSMO is to bring together researchers and practitioners in the field of structural and

multidisciplinary optimization (SMO), by means of international meetings having a high scientific

standard. Host selection criteria should include:

up-to-date conference facilities,

affordable costs to all members of the society (including registration, hotel, travel expenses,

considering also free lunches, banquet, excursions etc.),

proven congress organizing experience and strength of the local organizing group,

geographical diversity reflecting the distribution of SMO researchers over the world.

This is meant to imply a reasonably uniform distribution of congresses over three zones, namely Asia-

Australia, Europe-Africa and North & South Americas. Along these lines, ISSMO has held biennial World

Congresses of Structural and Multidisciplinary Optimization since 1995:

Goslar, Germany in 1995 (WCSMO-1)

Zakopane, Poland in 1997 (WCSMO-2)

Buffalo, United States in 1999 (WCSMO-3)

Dalian, China in 2001 (WCSMO-4)

Lido di Jesolo, Italy in 2003 (WCSMO-5)

Rio de Janeiro, Brazil in 2005 (WCSMO-6)

Seoul, South Korea in 2007 (WCSMO-7)

Lisbon, Portugal in 2009 (WCSMO-8)

Shizouka, Japan in 2011 (WCSMO-9)

Orlando, United States in 2013 (WCSMO-10)

6 WCSMO-11

History of Structural and Multidisciplinary Optimization in Australia

Australia has a long history of leadership in the area of structural and multidisciplinary optimization

(SMO).

In 1904, Anthony Michell, FRS, at the University of Melbourne published a paper in the Philosophical

Magazine of the Royal Society entitled “The Limits of Economy of Material in Frame-Structures” and so

was born the mathematical and engineering discipline of structural optimization. This tradition was

carried on many years later by Professor George Rozvany, the founder of the ISSMO at Monash University

in the 1960s and 1970s. He subsequently moved to the University of Essen in Germany. In those days,

structural optimization was a highly mathematical process with few practical applications. Another

seminal contribution was made by Professor Bill Hemp at Oxford University in the 1960s - Professor Grant

Steven was a doctorate student of Professor Hemp.

The advent of digital computers and the development of Finite Element Analysis saw the arrival of the

concept of using all sorts of algorithms to solve practical problems. A group at the University of Sydney,

led by Grant Steven, pioneered the use of quasi-heuristic methods based upon evolutionary processes in

nature called Evolutionary Structural Optimisation (ESO).

Several hundred research papers have been published on ESO and its derivatives and the method now

has been given mathematical underpinnings. Many of the research students from this period have gone

on to become academic researchers themselves and the method and its derivatives are now in common

use.

This early work has matured and now the researchers are working in many spin-off applications, the main

groups being under Professor Mike Xie at RMIT and Professor Qing Li at the University of Sydney.

The research group at the University of Sydney has 15 members and continues the tradition in structural

and multidisciplinary optimization.

ISSMO Executive Committee

President Ole Sigmund Technical University of Denmark, Denmark

Vice Presidents Alejandro R. Diaz Michigan State University, United States

Koetsu Yamazaki Kanazawa University, Japan

Secretary General Helder C. Rodrigues Instituto Superior Técnico, Portugal

Treasurer Erik Lund Aalborg University, Denmark

Past President Kyung K. Choi The University of Iowa, United States

Seoul National University, South Korea

Past Secretary General Byung Man Kwak Korea Advanced Institute of Science and Technology

(KAIST), South Korea

Members Raphael Haftka University of Florida, United States

Kurt Maute University of Colorado Boulder, United States

Vassili Toropov Queen Mary University of London, United Kingdom

Founding President George Rozvany Budapest University of Technology and Economics,

Hungary

June 7-12, 2015 7

Organizing Committees of WCSMO-11

Local Organizing Committee

Co-Chairmen Qing Li School of Aerospace, Mechanical and Mechatronic Engineering

The University of Sydney, Australia

Grant Steven School of Aerospace, Mechanical and Mechatronic Engineering

The University of Sydney, Australia

Members Vivien Challis University of Queensland, Australia

Raj Das University of Auckland, New Zealand

Wei Gao University of New South Wales, Australia

Kazem Ghabraie University of Southern Queensland, Australia

Hong Guan Griffith University, Australia

Manfred Heller Defence Science and Technology Organisation, Australia

Xiaodong Huang RMIT University, Australia

Don Kelly University of New South Wales, Australia

Wei Li The University of Sydney, Australia

Weihua Li University of Wollongong, Australia

Qingquan Liang Victoria University, Australia

Zhen Luo University of Technology, Sydney, Australia

Ian Manchester The University of Sydney, Australia

Guangyong Sun Hunan University, China and University of Sydney, Australia

Ray Tapabrata University of New South Wales, Australia

Francis Tin-Loi University of New South Wales, Australia

Liyong Tong The University of Sydney, Australia

Gareth A. Vio The University of Sydney, Australia

Mike Xie RMIT University, Australia

Shiwei Zhou RMIT University, Australia

International Papers Committee

Chairman Nam-Ho Kim University of Florida, United States

Members Jose Miranda Guedes Instituto Superior Técnico, Portugal

James Guest Johns Hopkins University, United States

Shinji Nishawaki Kyoto University, Japan

Byeng Dong Youn Seoul National University, South Korea

Grant Steven The University of Sydney, Australia

8 WCSMO-11

International Scientific Committee

Wolfgang Achtziger Friedrich-Alexander University Erlangen-

Nuremberg, Germany

Natalia Alexandrov NASA, United States

Grégoire Allaire Ecole Polytechnique, France

Oded Amir Israel Institute of Technology, Israel

Jasbir S. Arora University of Iowa, United States

Shapour Azarm University of Maryland, United States

Hideyuki Azegami Nagoya University, Japan

Horst Baier Technische Universität München,

Germany

Vladimir Balabanov Boeing, United States

Martin P. Bendsøe Technical University of Denmark,

Denmark

Kai-Uwe Bletzinger Technische Universität München,

Germany

Piotr Breitkopf Université de Technologie de

Compiègne, France

Tadeusz Burczyński Silesian University of Technology, Poland

Wei Chen Northwestern University, United States

Yuhang Chen Heriot-Watt University, United Kingdom

Gengdong Cheng Dalian University of Technology, China

Andrej V. Cherkaev University of Utah, United States

Seon Ho Cho Seoul National University, South Korea

Dong-Hoon Choi Hanyang University, South Korea

Joo Ho Choi Korea Aerospace University, Korea

Kyung K. Choi The University of Iowa, United States

Seoul National University, South Korea

Souma Chowdhury University of Syracuse, United States

William A. Crossley Purdue University, United States

Alejandro R. Diaz Michigan State University, United States

Jianbin Du Tsinghua University, China

Xiaoping Du Missouri University of Science and

Technology, United States

Baoyan Duan Xidian University, China

Pierre Duysinx University of Liege, Belgium

Peter Eberhard University of Stuttgart, Germany

L.F. Pascal Etman Eindhoven University of Technology, The

Netherlands

Anton Evgrafov Norwegian University of Science and

Technology, Norway

Georges M. Fadel Clemson University, United States

Brian G. Falzon Queen’s University Belfast, United

Kingdom

Howie Fang University of North Carolina at Charlotte,

United States

Hitoshi Furuta Kansai University, Japan

Hiroshi Furuya Tokyo Institute of Technology, Japan

Moshe B. Fuchs Tel Aviv University, Israel

Manuel Garcia EAFIT University, Medellin, Colombia

Hae Chang Gea Rutgers University, United States

Ramana V. Grandhi Wright State University, United States

Albert Groenwold University of Stellenbosch, South Africa

Jose Miranda Guedes University of Lisbon, Portugal

James K. Guest Johns Hopkins University, United States

Xu Guo Dalian University of Technology, China

Zafer Gürdal University of South Carolina, United

States

Sergio Gutiérrez Pontificia Universidad Católica de Chile,

Chile

Witold Gutkowski Institute of Mechanized Construction

and Rock Mining, Poland

Raphael Haftka University of Florida, United States

Prabhat Hajela Rensselaer Polytechnic Institute, United

States

Xu Han Hunan University, China

Jose Herskovits Federal University of Rio de Janeiro,

Brazil

Shujuan Hou Hunan University, China

Károly Jármai University of Miskolc, Hungary

Héctor Jensen Universidad Tecnica Federico Santa

Maria, Chile

Sándor Kaliszky Budapest University of Technology and

Economics, Hungary

Zhan Kang Dalian University of Technology, China

Bhushan L Karihaloo Cardiff University, United Kingdom

Harrison Hyung Min Kim University of Illinois at Urbana-

Champaign, United States

H. Alicia Kim Bath University, United Kingdom

Nam-Ho Kim University of Florida, United States

Yoon Young Kim Seoul National University, South Korea

Uri Kirsch Technion - Israel Institute of Technology,

Israel

Satoshi Kitayama Kanazawa University, Japan

Anders Klarbing Linkoping Institute of Technology,

Sweden

Nozomu Kogiso Osaka Prefecture University, Japan

Robert V. Kohn New York University, United States

Michael Kokkolaras McGill University, Canada

Juhani Koski Tampere University of Technology,

Finland

Byung Man Kwak Korea Advanced Institute of Science and

Technology (KAIST), South Korea

Tae Hee Lee Hanyang University, Korea

Jaan Lellep University of Tartu, Estonia

Tomasz Lewiński Warsaw University of Technology,

Poland

Gang Li Dalian University of Technology, China

Guangyao Li Hunan University, China

Shutian Liu Dalian University of Technology, China

János Lógó Budapest University of Technology and

Economics, Hungary

Sankaran Mahadavan Vanderbilt University, United States

Giulio Maier Technical University (Politecnico) of

Milan, Italy

Joaquim R. R. A. Martins University of Michigan, United States

June 7-12, 2015 9

Kurt Maute University of Colorado at Boulder, United

States

Robert E. Melchers The University of Newcastle, Australia

Carlos A. Mota Soares Technical University of Lisbon, Portugal

Achille Messac Mississippi State University, United

States

Zenon Mróz Institute of Fundamental Technological

Research of the Polish Academy of

Sciences, Poland

Somanath Nagendra General Electric Corporate Research and

Development, United States

Shinji Nishiwaki Kyoto University, Japan

Julian Norato University of Connecticut, United States

Makoto Ohsaki Kyoto University, Japan

Niels Olhoff Aalborg University, Denmark

Manolis Papadrakakis National Technical University of Athens,

Greece

Panos Y. Papalambros University of Michigan, United States

Gyung-Jin Park Hanyang University, South Korea

Glaucio H. Paulino University of Illinois at Urbana-


Niels Leergaard Pedersen Technical University of Denmark,

Denmark

Pauli Pedersen Technical University of Denmark,

Denmark

Osvaldo M. Querin University of Leeds, United Kingdom

Ulf Ringertz KTH Royal Institute of Technology,

Sweden

Helder C. Rodrigues Instituto Superior Técnico, Portugal

David Romero University of Toronto, Canada

Jianhua Rong Changsha University of Science and

Technology, China

George Rozvany Budapest University of Technology and

Economics, Hungary

Johann Sienz Swansea University, United Kingdom

Ole Sigmund Technical University of Denmark,

Denmark

Emílio Carlos Nelli Silva Escola Politécnica of the University of

São Paulo, Brazil

Mehmet Polat Saka University of Bahrain, Bahrain

Eckart Schnack Karlsruhe Institute of Technology,

Germany

Alexander P. Seyranian Moscow State Lomonosov University,

Russia

Nielen Stander Livermore Software Technology

Corporation, Livermore, United States

Yunkang Sui Beijing University of Technology, China

Krister Svanberg KTH Royal Institute of Technology,

Sweden

Yuiko Tada Kobe University, Japan

Shashi Talya Baker Hughes, United States

Akira Todoroki Tokyo Institute of Technology, Japan

Vassili Toropov Queen Mary University of London,

United Kingdom

Daniel A. Tortorelli University of Illinois at Urbana-


F. Van Keulen Delft University of Technology, The

Netherlands

Felipe A. C. Viana University of Florida, United States

Michael Yu Wang Chinese University of Hong Kong, China

Gaofeng Gary Wang Simon Fraser University, Canada

Semyung Wang Gwangju Institute of Science &

Technology, South Korea

Takayuki Yamada Kyoto University, Japan

Hiroshi Yamakawa Waseda University, Japan

Koetsu Yamazaki Kanazawa University, Japan

Ren-Jye Yang Ford Motor Company, United States

Byeng Dong Youn Seoul National University, South Korea

Sung-Kie Youn Korea Advanced Institute of Science and

Technology, South Korea

Nicholas Zabaras University of Warwick, United Kingdom

Weihong Zhang Northwestern Polytechnic University,

Xi'an, China

Jianshun Zhang University of Syracuse, United States

Ming Zhou Altair Engineering Inc., United States

Secretariat

Bryant (Che-Cheng) Chang Sriram Tammareddi

Junning (John) Chen Scott Townsend

Ali Enterazi Phillip Tran

Jianguang Fang Paul Wong

Salvatore Samuel Grasso Nobuhiro Yoda

Zhipeng (Floyd) Liao Dequan (Darren) Zhang

Andrian Sue Zhongpu (Leo) Zhang

Guangyong Sun Keke (Marco) Zheng

10 WCSMO-11

ISSMO Executive Committee Election

Attention all full members of ISSMO

Voting for the next ISSMO executive committee (EC) is almost closed. Do not miss out on electing your

new EC.

To vote, please follow these steps:

1. Login with your ISSMO account on the ISSMO home page, www.issmo.net

2. Click on “Current Poll: ISSMO Executive Committee Election 2015” (below the login field)

3. A voting page listing alphabetically the 18 candidates is offered. You should vote for 8 candidates,

clicking on the respective boxes.

4. Click “Vote”

Details of the candidates can be found by going to www.issmo.net/elections

The voting system will close on 8th June, 2015 24:00 AEDT (Sydney time).

Note that only members of ISSMO with voting rights can vote. Voting rights are given to those who have

attended, with paid registrations, at least one of the last two World Congresses of Structural and

Multidisciplinary Optimization prior to the current congress and to those attending, with paid

registrations, the current congress (WCSMO-9, -10, and -11).

Past Presidents of ISSMO

George Rozvany 1991-1995

Raphael Haftka 1995-1999

Niels Olhoff 1999-2003

Martin Bendsoe 2003-2007

Kyung K. Choi 2007-2011

Ole Sigmund 2011-2015

http://www.issmo.net/

http://www.issmo.net/elections

June 7-12, 2015 11

Conference Program

Sunday

7 June 2015

Monday

8 June 2015

Tuesday

9 June 2015

Wednesday

10 June 2015

Thursday

11 June 2015

Friday

12 June 2015

08:00-08:45

Registration &

Opening

Ceremony

(10:00)

08:45-09:00

Excursion:

Sydney Opera

House Tour

09:00-10:40 Parallel

Session 3

Parallel

Session 6

Parallel

Session 9

10:40-11:00 Tea Break

11:00-12:40 Parallel

Session 1

Parallel

Session 4

Poster

Session

Parallel

Session 10

12:40-14:00 Lunch

14:00-16:00

Registration

Parallel

Session 2

Parallel

Session 5

Parallel

Session 7

Parallel

Session 11

16:00-16:20

Congress

Reception:

Sydney

Harbour

Cruise

(15:45)

Tea Break

16:20-18:00 General

Assembly

Parallel

Session 8

SOTA

Discussion

18:00-20:00

Congress

Dinner

20:00-21:00

Excursion:

Sydney Opera

House Concert 21:00-22:30

12 WCSMO-11

Maps

Camperdown/Darlington Campus of the University of Sydney

Eastern Avenue Auditorium and Theatre Complex and Carslaw Building

Level 1

June 7-12, 2015 13

Level 2

Level 3

14 WCSMO-11

Program Schedule

Monday 8th June, 2015

Session

Eastern Avenue

Auditorium

(EAA)

Carslaw Lecture

Theatre 375

(CLT375)

Carslaw Lecture

Theatre 273

(CLT273)

Carslaw Lecture

Theatre 275

(CLT275)

Carslaw Lecture

Room 350

(CLR350)

Carslaw Lecture

Room 351

(CLR351)

Opening Ceremony

(Eastern Avenue Auditorium)

1

Topology and

Shape

Optimization 1

Topology and

Shape

Optimization 2

Design with

Uncertainty 1

Micro- and

Nano-Structural

Materials 1

Automotive

Engineering 1

Mechanical

Engineering 1

2

Topology and

Shape

Optimization 3

Topology and

Shape

Optimization 4

Design with

Uncertainty 2

Design

Optimization in

Multiscale

Problems 1

Multidisciplinary

Optimization 1

Mechanical

Engineering 2

Congress Reception

(Sydney Harbour Cruise)

Tuesday 9th June, 2015

Session

Eastern Avenue

Auditorium

(EAA)

Carslaw Lecture

Theatre 375

(CLT375)

Carslaw Lecture

Theatre 273

(CLT273)

Carslaw Lecture

Theatre 275

(CLT275)

Carslaw Lecture

Room 350

(CLR350)

Carslaw Lecture

Room 351

(CLR351)

3

Topology and

Shape

Optimization 5

Topology and

Shape

Optimization 6

Design with

Uncertainty 3

Design

Optimization in

Civil and

Structural

Engineering 1

Automotive

Engineering 2

Aerospace

Design

Optimization 1

4

Topology and

Shape

Optimization 7

Robust and

Reliability-Based

Design

Optimization 1

Sensitivity

Analysis Methods

and Applications

Micro- and

Nano-Structural

Materials 2

Mechanical

Engineering 3

5

Topology and

Shape

Optimization 8

Topology and

Shape

Optimization 9

Topology and

Shape

Optimization 10

Design of

Composite

Materials 1

Topology and

Shape

Optimization 11

Approximations

with Surrogates

or Metamodels 1

General Assembly


June 7-12, 2015 15

Wednesday 10th June, 2015

Session

Eastern Avenue

Auditorium

(EAA)

Carslaw Lecture

Theatre 375

(CLT375)

Carslaw Lecture

Theatre 273

(CLT273)

Carslaw Lecture

Theatre 275

(CLT275)

Carslaw Lecture

Room 350

(CLR350)

Carslaw Lecture

Room 351

(CLR351)

6

Topology and

Shape

Optimization 12

Topology and

Shape

Optimization 13

Multidisciplinary

Optimization 2

Design of

Composite

Materials 2

Optimization

Algorithms 1

Approximations

with Surrogates

or Metamodels 2

Poster Session

(Eastern Avenue Foyer)

7

Topology and

Shape

Optimization 14

Topology and

Shape

Optimization 15

Robust and

Reliability-Based

Design

Optimization 2

Aerospace

Design

Optimization 2

Topology and

Shape

Optimization 16

Design

Optimization in

Civil and

Structural

Engineering 2

8

Design

Optimization in

Civil and

Structural

Engineering 3

Topology and

Shape

Optimization 17

Robust and

Reliability-Based

Design

Optimization 3

Design

Optimization in

Multiscale

Problems 2

Structural

Optimization 1

Mechanical

Engineering 4

Thursday 11th June, 2015

Session

Eastern Avenue

Auditorium

(EAA)

Carslaw Lecture

Theatre 375

(CLT375)

Carslaw Lecture

Theatre 173

(CLT173)

Carslaw Lecture

Theatre 175

(CLT175)

Carslaw Lecture

Room 350

(CLR350)

Carslaw Lecture

Room 351

(CLR351)

9

Topology and

Shape

Optimization 18

Topology and

Shape

Optimization 19

Structural

Optimization 2

Automotive

Engineering 3

Large Scale and

High

Performance

Computing

Aerospace

Design

Optimization 3

10

Topology and

Shape

Optimization 20

Topology and

Shape

Optimization 21

Topology and

Shape

Optimization 22

Topology and

Shape

Optimization 23

Multidisciplinary

Optimization 3

Inverse Problems

and Parametric

Identification

11

Topology and

Shape

Optimization 24

Structural

Optimization 3

Optimization

Algorithms 2

Automotive

Engineering 4

Multidisciplinary

Optimization 4

State-of-the-Art Discussion


Congress Dinner

(The Great Hall)

16 WCSMO-11

Notes

June 7-12, 2015 17

Opening Ceremony

Monday 8 th June, 2015

10:00 – 10:30

Eastern Avenue Auditorium

Please join us for the Opening Ceremony, to be held at Eastern Avenue

Auditorium

Chair Professor Grant P. Steven

Co-Chair, WCSMO-11

University of Sydney, Australia

Welcome Speech Professor Ole Sigmund

President, ISSMO

Technical University of Denmark, Denmark

Invited Opening Speech Professor Mary O'Kane

Chief Scientist & Engineer

New South Wales, Australia

Executive Chairman

O ’Kane Associates, Australia

Twenty Years and Outlook

of WCSMO

Professor Raphael Haftka

Past President, ISSMO

University of Florida, United States

Mo

nd

ay 8

th J

un

e, 2015

18 WCSMO-11

Session 1


11:00 – 12:40

Room: EAA Topology and Shape Optimization 1 (Level-Set Method)

Chairs: Shinji Nishiwaki (Kyoto University, Japan) and Yoon Young Kim (Seoul National University, South Korea)

Time ID Presenting Author Title

11:00 1148 Shinji Nishiwaki

(Kyoto University, Japan)

A level set based topology optimization method for micropump design utilizing induced-charge electro-

osmosis

Ryuta Tanaka, Kentaro Yaji, Takayuki Yamada, Kazuhiro Izui, Shinji Nishiwaki*

11:20 1002

Qi Xia

(Huazhong University of Science and

Technology, China)

A level set method for the representation of multiple types of boundaries and its application in

structural shape and topology optimization

Qi Xia*, Michael Yu Wang, Tielin Shi

11:40 1024

Peng Wei

(South China University of Technology,

China)

A Parameterized Level Set Method with Polygonal Finite Elements in Topology Optimization

Peng Wei*, Glaucio H. Paulino

12:00 1219 Atsushi Kawamoto

(Toyota Central R&D Labs., Inc., Japan)

Level set-based optimization using automated solutions of partial differential equations

Atsushi Kawamoto*, Tsuyoshi Nomura, Tsuguo Kondoh, Shinji Nishiwaki

12:20 1313 Christopher James Brampton

(University of Bath, United Kingdom)

A hole insertion method for sequential linear programming level-set topology optimisation

Christopher J. Brampton*, Peter D. Dunning, H. Alicia Kim

Room: CLT375 Topology and Shape Optimization 2

Chairs: Nam H. Kim (University of Florida, United States) and Shintaro Yamasaki (Osaka University, Japan)


11:00 1231 Eddie Wadbro

(Umeå University, Sweden)

Fast evaluation of quasi-arithmetic mean based filters for topology optimization

Eddie Wadbro*, Linus Hägg

11:20 1272

Kirill A. Balunov

(Central Aerohydrodynamic Institute

(TsAGI), Russia)

Method of Variable Transformation for Topology Optimization with Clear Boundary Shape

Vladimir V. Uskov, Kirill A. Balunov*

11:40 1297 Shintaro Yamasaki

(Osaka University, Japan)

Applications of a consistent grayscale-free topology optimization method to industrial design problems

Shintaro Yamasaki*, Atsushi Kawamoto, Tsuyoshi Nomura, Kikuo Fujita

12:00 1387

Xiaobo Yu

(Defence Science and Technology

Organisation, Australia)

A new mesh evolution algorithm to enable improved rework shape optimisation of complex 3-D

structures

Xiaobo Yu*

12:20 1401

Kai-Uwe Bletzinger

(Technische Universität München,

Germany)

Form finding by shape optimization with the Vertex Morphing Method – About the equivalence of

sensitivity filtering and standard spline models

Kai-Uwe Bletzinger*, Majid Hojjat, Electra Stavropoulou

Room: CLT273 Design with Uncertainty 1

Chairs: Byeng D. Youn (Seoul National University, South Korea) and Hyunseok Oh (Seoul National University, South Korea)


11:00 1085

Loïc Brevault

(Onera - The French Aerospace Lab,

France)

Multi-level hierarchical MDO formulation with functional coupling satisfaction under uncertainty,

application to sounding rocket design

Loïc Brevault*, Mathieu Balesdent, Nicolas Bérend, Rodolphe Le Riche

11:20 1236 Hyunseok Oh

(Seoul National University, South Korea)

Statistical Model Calibration of Lifetime Models with Failure and Censored Life Testing Data

Hyunseok Oh*, Hsiu-Ping Wei, Bongtae Han, Byeng D. Youn

11:40 1269 Heonjun Yoon


System reliability analysis of piezoelectric energy harvester under various physical uncertainties

Heonjun Yoon*, Byeng D. Youn, Heung S. Kim

12:00 1015 Kemin Zhou

(Huaqiao University, China)

Topology Optimization of Truss-Like Continuum under Uncertain Load

Kemin Zhou*

12:20 1190 Makoto Yamakawa

(Tokyo Denki University, Japan)

Validation of robust design with the k-th order statistics by structural reliability index

Makoto Yamakawa*, Makoto Ohsaki

Mo

nd

ay 8

th Jun

e, 2

015

June 7-12, 2015 19

Room: CLT275 Micro- and Nano-Structural Materials 1

Chairs: Erik Lund (Aalborg University, Denmark) and Jianbin Du (Tsinghua University, China)


11:00 1078 Jin-Xing Shi

(Toyota Technological Institute, Japan)

Shape Optimum Design of Graphene Sheets

Jin-Xing Shi*, Masatoshi Shimoda

11:20 1368 Hong-Lae Jang


Design Sensitivity Analysis of Molecular Dynamics Considering NVT Ensemble

Hong-Lae Jang*, Hyun-Seok Kim, Jae-Hyun Kim, Song-Hyun Cha, Youmie Park, Seonho Cho

11:40 1064 Jianbin Du

(Tsinghua University, China)

Reliability-based microstructural topology design with respect to vibro-acoustic criteria

Jianbin Du*, Chuangchuang Sun

12:00 1092 Kaveh Amouzgar

(Jönköping University, Sweden)

Multi-objective optimization of material model parameters of an adhesive layer by using SPEA2

Kaveh Amouzgar*, Mirza Cenanovic, Kent Salomonsson

12:20 1353

Seung-Hyun Ha

(Korea Maritime and Ocean University,

South Korea)

Design and Simulation for 3-D Woven Lattice Structures

Seung-Hyun Ha*, Longyu Zhao, Yong Zhang, Stephen Ryan, Keith Sharp, Kevin Hemker, Tim Weihs, James

Guest

Room: CLR350 Automotive Engineering 1 (Crashworthiness I)

Chairs: Gengdong Cheng (Dalian University of Technology, China) and Shujuan Hou (Hunan University, China)


11:00 1033 Youngmyung Lee

(Hanyang University, South Korea)

Crash Optimization of Automobile Frontal and Side Structures Using Equivalent Static Loads

Youngmyung Lee*, Jin-Seok Ahn, Gyung-Jin Park

11:20 1203 Ping Zhu

(Shanghai Jiao Tong University, China)

Multidisciplinary optimization on auto-body lightweight design using modified particle swarm

optimizer

Zhao Liu, Ping Zhu*, Wei Chen, Ren-Jye Yang

11:40 1047 Shujuan Hou

(Hunan University, China)

Study on Energy Absorption Characteristics of Corrugated Sandwich Panels

Shujuan Hou*, Xu Han, Qing Li

12:00 1167

Laurent Genest

(LTDS, Ecole Centrale de Lyon & Renault

S.A.S., France)

Shape optimization method for crashworthiness design based on Equivalent Static Loads concept

Laurent Genest*, Louis Jézéquel, Frédéric Gillot, Frédéric Mercier

12:20 1036

Siliang Zhang

(Pan Asia Technical Automotive Center,

China)

Adaptive multi-point sequential sampling methodology for highly nonlinear automotive

crashworthiness design problems

Siliang Zhang*, Zhengchao Song, Guohong Shi, Rongying Qiu

Room: CLR351 Mechanical Engineering 1 (Compliant Mechanisms)

Chairs: Ming Zhou (Altair Engineering, United States) and Jaewook Lee (Korea Aerospace University, South Korea)


11:00 1212

Jaewook Lee

(Korea Aerospace University, South

Korea)

Topology optimization of vibration energy harvesters using electromagnetic induction

Jaewook Lee*, Sang Won Yoon

11:20 1140

Jong Ho Kim

(Korea Advanced Institute of Science and

Technology, South Korea)

Dual-mode Operation of the Finger-type Manipulator Based on Distributed Actuation Mechanism

Jong Ho Kim*, Young June Shin, Sung-Hwan Kim, In Gwun Jang

11:40 1451 Masakazu Kobayashi


Optimal design of a wheelchair suspension based on a compliant mechanism

Masakazu Kobayashi*

12:00 1089 Emmanuel Tromme

(University of Liege, Belgium)

A level set approach for the structural optimization of flexible mechanisms

Emmanuel Tromme*, Daniel Tortorelli, Olivier Bruls, Pierre Duysinx

12:20 1023

Jun Zou

(Nanjing University of Aeronautics and

Astronautics, China)

A Sensitivity-based Coordination Method for Optimization of Product Families

Jun Zou*, Wei-Xing Yao, Jun-Feng Zheng

Mo

nd

ay 8

th J

un

e, 2015

20 WCSMO-11

Session 2


14:00 – 16:00

Room: EAA Topology and Shape Optimization 3 (Level-Set/Explicit Method)

Chairs: James K. Guest (Johns Hopkins University, United States) and Xu Guo (Dalian University of Technology, China)


14:00 1283 Xu Guo

(Dalian University of Technology, China)

Doing Topology Optimization Explicitly and Geometrically—A New Moving Morphable Components

Based Framework

Xu Guo*, Weisheng Zhang, Jian Zhang, Wenliang Zhong

14:20 1270 Yuki Sato


Exploring the Pareto frontier in level set-based topology optimization

Yuki Sato*, Kazuhiro Izui, Takayuki Yamada, Shinji Nishiwaki

14:40 1284 Weisheng Zhang


An explicit feature control approach in structural topology optimization

Weisheng Zhang*, Xu Guo, Wenliang Zhong

15:00 1431 Masaki Otomori

(AISIN AW CO., LTD., Japan)

Level set-based topology optimization for the design of optical hyperlens

Masaki Otomori*, Kei Uenishi, Takayuki Yamada, Kazuhiro Izui, Shinji Nishiwaki

Room: CLT375 Topology and Shape Optimization 4 (Phononics/Photonics/Plasmonics)

Chairs: Emílio Carlos Nelli Silva (University of São Paulo, Brazil) and Xiaodong Huang (RMIT University, Australia)


14:00 1038 Saeid Hedayatrasa

(University of South Australia, Australia)

Novel approach in topology optimization of porous plate structures for phononic bandgaps of flexural

waves

Saeid Hedayatrasa*, Kazem Abhary, Mohammad Uddin, Ching-Tai Ng

14:20 1065 Fei Meng

(RMIT University, Australia)

A new topology optimization algorithm for photonic band gap structures

Fei Meng*, Xiaodong Huang, Baohua Jia

14:40 1066 Yangfan Li


Topology optimization of two-dimensional phononic band gap crystals based on BESO methods

Yangfan Li*, Xiaodong Huang, Fei Meng, Shiwei Zhou

15:00 1202 Masayoshi Satake

(Nippon Soken Inc., Japan)

Shape optimization of waveguide cut-off filter

Masayoshi Satake*, Hideyuki Azegami


Chairs: Wei Chen (Northwestern University, United States) and Ikjin Lee (Korea Advanced Institute of Science and Technology, South Korea)


14:00 1226 Byeng D. Youn


Model refinement for fracture failure prediction of smartphone LCD with unrecognized blind

uncertainty

Hyunseok Oh, Jisun Kim, Jungho Park, Byeng D. Youn*, Byung C. Jung

14:20 1189

Ikjin Lee



Enhanced second-order reliability method and stochastic sensitivity analysis using importance sampling

Jongmin Lim, Byungchai Lee, Ikjin Lee*

14:40 1224 Makoto Ito

(Osaka Prefecture University, Japan)

Parameter estimation method using Bayesian statistics considering uncertainty of information for RBDO

Makoto Ito*, Nozomu Kogiso

15:00 1233 Jaehyeok Doh

(Yonsei University, South Korea)

Reliability Based Design Optimization Using Bayesian Reliability Neural Networks

Jaehyeok Doh*, Jongsoo Lee

Mo

nd

ay 8

th Jun

e, 2

015

June 7-12, 2015 21

Room: CLT275 Design Optimization in Multiscale Problems 1

Chairs: H. Alicia Kim (University of Bath, United Kingdom) and Liang Xia (Sorbonne universités, Université de technologie de Compiègne, France)


14:00 1142 Gengdong Cheng


Two-scale design optimization of bending plate made of lattice or foam material subject to buckling

constraint

Gengdong Cheng*, Jun Yan, Liang Xu

14:20 1019 Peter D. Dunning

(University of Bath, United Kingdom)

Multiscale topology optimization using constraint coordination

Peter D. Dunning*, H. Alicia Kim

14:40 1118 Xuan Liang


Integrated multi-scale vibro-acoustic topology optimization of structure and material

Xuan Liang*, Jianbin Du

15:00 1397

Liang Xia

(Sorbonne universités, Université de

technologie de Compiègne, France)

Multiscale structural topology optimization

Liang Xia*, Piotr Breitkopf

15:20 1328

Thomas Guess

(University of Erlangen-Nürnberg,

Germany)

Coupled Two-Scale Material Optimization for Lattice Structures using different upscaling techniques

Thomas Guess*, Michael Stingl, Fabian Wein

Room: CLR350 Multidisciplinary Optimization 1 (Biomedical I)

Chairs: Vassili Toropov (Queen Mary University of London, United Kingdom) and Yuhang Chen (Heriot-Watt University, United Kingdom)


14:00 1179 Yuhang Chen

(Heriot-Watt University, United Kingdom)

Fluid-structure interaction and Optimization-based Approach for Homogenization of Soft Tissue

Viscoelasticity

Behnam Esfandiar Jahromi, Javier Palacio-Torralba, Frank Yntema, Robert L. Reuben, Yuhang Chen*

14:20 1323 Anna-Lena Beger

(RWTH Aachen University, Germany)

Tailored natural components – functional geometry and topology optimization of technical grown

plants

Anna-Lena Beger*, Manuel Löwer, Jörg Feldhusen, Jürgen Prell, Alexandra Wormit, Björn Usadel, Christoph

Kämpfer, Thomas-Benjamin Seiler, Henner Hollert, Franziska Moser, Martin Trautz

14:40 1386 Andrew D. Cramer

(University of Queensland, Australia)

Microstructure interpolation for macroscopic design with application to bone prosthetics

Andrew D. Cramer*, Vivien J. Challis, Anthony P. Roberts

15:00 1161

Dongjin Kim


Korea)

The electrode shape optimization method for cell sorting applications based on dielectrophoresis

Dongjin Kim*, Yiseul Kim, Byungkyu Kim, Jaewook Lee

15:20 1456 Sriram Tammareddi

(University of Sydney, Australia)

Robust Multiobjective Optimization of Coronary Stents

Sriram Tammareddi*, Guangyong Sun, Qing Li

Room: CLR351 Mechanical Engineering 2 (Plastoelasticity)

Chairs: Niels Leergaard Pedersen (Technical University of Denmark, Denmark) and Koetsu Yamazaki (Kanazawa University, Japan)


14:00 1391 Koetsu Yamazaki

(Kanazawa University, Japan)

Earing Minimization with Segmented and Variable Blank Holder Force during Deep Drawing Process for

Circular Cup Forming

Koetsu Yamazaki*, Shinya Makino, Jing Han, Hiroaki Uchida

14:20 1409 Jing Han

(Universal Can Corporation, Japan)

Optimization of Pulsating Blank Holder Force for Deep Drawing of Cylindrical Cups

Jing Han*, Shinji Natsume, Satoshi Kitayama, Koetsu Yamazaki, Hiroaki Uchida

14:40 1453 Yi-min Deng

(Ningbo University, China)

Optimization of packing pressure profile for minimization of multiple injection molding defects

Yi-min Deng*, Guo-fu Li

15:00 1067

Niels Leergaard Pedersen

(Technical University of Denmark,

Denmark)

Optimization of contact stress distribution in interference fit

Niels Leergaard Pedersen*

15:20 1382

Rebecca Evans



Transfer effects for stress optimal shapes between design codes and from design to NC manufacture

Rebecca Evans*, Xiaobo Yu, Manfred Heller

Mo

nd

ay 8

th J

un

e, 2015

22 WCSMO-11

Notes

Mo

nd

ay 8

th Jun

e, 2

015

June 7-12, 2015 23

Congress Reception


15:45 – 20:00

Please join us for the Congress Reception, and see the spectacular

lights of the Vivid Light, Music & Ideas Festival 2015 , on a

Sydney Harbour Cruise

Attendees should make their way to the bus stop at the front of Fisher

Library as soon as Session 2 is complete. DO NOT BE LATE. Buses will

depart from Fisher Library at 15:45 and arrive at Star City Wharf.

Attendees will then be guided to board the vessel. The cruise will

begin at 16:30, and finish around 19:30. Attendees will be dropped off

at Circular Quay.

Mo

nd

ay 8

th J

un

e, 2015

24 WCSMO-11

Session 3

Tuesday 9 th June, 2015

09:00 – 10:40

Room: EAA Topology and Shape Optimization 5 (Stress Criteria)

Chairs: Oded Amir (Technion - Israel Institute of Technology, Israel) and Pierre Duysinx (University of Liege, Belgium)


09:00 1242 Pierre Duysinx

(University of Liege, Belgium)

Topology optimization of mechanical and aerospace components subject to fatigue stress constraints

Pierre Duysinx*, Maxime Collet, Simon Bauduin, Emmanuel Tromme, Lise Noel, Matteo Bruggi

09:20 1145 Yusuke Naritomi

(Allied Engineering Corporation, Japan)

Shape optimization for minimizing the KS function of von Mises stress using shape derivative of domain

integral type

Yusuke Naritomi*, Hideyuki Azegami

09:40 1057 Cesar Yukishigue Kiyono

(University of São Paulo, Brazil)

Topology optimisation for stress-based problems applied to laminated composite structures

Cesar Yukishigue Kiyono*, Junuthula N. Reddy, E. C. N. Silva

10:00 1288

Oded Amir

(Technion - Israel Institute of Technology,

Israel)

An alternative approach for satisfying stress constraints in continuum topology optimization using

nonlinear material modeling

Oded Amir*

10:20 1274

Seongyeol Goo

(Gwangju Institute of Science and


Structural topology optimization with eigenvalue and stress constraints using ANSYS

Seongyeol Goo*, Jaeyub Hyun, Jasoon Jung, Semyung Wang

Room: CLT375 Topology and Shape Optimization 6

Chairs: Julian A. Norato (University of Connecticut, United States) and Sawekchai Tangaramvong (University of New South Wales, Australia)


09:00 1419 Sawekchai Tangaramvong

(University of New South Wales, Australia)

Structural Optimization under Complementarity Constraints

Sawekchai Tangaramvong*, Francis Tin-Loi

09:20 1048 Julian A. Norato

(University of Connecticut, United States)

A geometry projection method for continuum-based topology optimization of frames with member

length constraints

Julian A. Norato*, Bryan K. Bell, Daniel A. Tortorelli

09:40 1285 Jian Zhang


The Integration of Explicit and Implicit Models in Topology Optimization

Jian Zhang*, Xu Guo, Weisheng Zhang, Wenliang Zhong

10:00 1441 Emiel Anton Van De Ven

(Technical University Delft, Netherlands)

Topology Optimization of a Transient Thermo-Mechanical Problem using Material Penalization

Emiel Anton van de Ven*, Evert Hooijkamp, Matthijs Langelaar, Fred van Keulen

10:20 1156

Jung Jin Kim



Localized resolution enhancement of skeletal images based on topology optimization

Jung Jin Kim*, In Gwun Jang


Chairs: Joo Ho Choi (Korea Aerospace University, South Korea) and Palaniappan Ramu (Indian Institute of Technology, India)


09:00 1407

Joo Ho Choi


Korea)

Parameter estimation of the electrochemical model in Li-ion battery with polynomial-based surrogate

model

Joo Ho Choi*, Jaewook Lee, Wooseok Sung

09:20 1423

Hee Seong Kim


Korea)

A Study on the Statistical Calibration and Validation of Computational Model of Pyrotechnically

Actuated Devices

Hee Seong Kim*, Joo Ho Choi

09:40 1227

Yi Zhang

(National University of Defense

Technology, China)

A Sequential Optimization and Mixed Uncertainty Analysis Method Based on Taylor Series

Approximation

Xiaoqian Chen, Wen Yao, Yiyong Huang, Yi Zhang*

10:00 1232 Palaniappan Ramu

(Indian Institute of Technology, India)

High reliability estimation using CVaR+

Palaniappan Ramu*

10:20 1240

Norio Takeda

(Hitachi Research Laboratory, Hitachi,

Ltd., Japan)

Surrogate Models for Data-Inspired Reliability Design

Norio Takeda*

Tu

esd

ay 9

th Jun

e, 2

015

June 7-12, 2015 25

Room: CLT275 Design Optimization in Civil and Structural Engineering 1

Chairs: Bo Wang (Dalian University of Technology, China) and Makoto Ohsaki (Hiroshima University, Japan)


09:00 1040 Makoto Ohsaki


Optimization of flexible supports for seismic response reduction of long-span structures

Makoto Ohsaki*, Osamu Iwatsuki, Yuji Miyazu, Seita Tsuda

09:20 1071 Alexis Tugilimana

(Université libre de Bruxelles, Belgium)

Structural optimization of standardized trusses by dynamic grouping of modules

Alexis Tugilimana*, Rajan Filomeno Coelho, Ashley P. Thrall

09:40 1339

Kok-Hon Chew

(Nanyang Technological University,

Singapore)

Fatigue Sensitivity Analysis of Offshore Wind Turbine Structures

Kok-Hon Chew*, Michael Muskulus, Srikanth Narasimalu, Kang Tai, E. Y. K. Ng

10:00 1413 Bo Wang


Diverse Competitive Designs for SIMP-based Topology Optimization

Bo Wang*, Yan Zhou, Yiming Zhou

10:20 1083 Xin Zhao

(Tongji University, China)

Optimization of wind-induced acceleration of super tall buildings by modal shape updating

Xin Zhao*, Xiang Jiang

Room: CLR350 Automotive Engineering 2 (Crashworthiness II)

Chairs: Ping Zhu (Shanghai Jiao Tong University, China) and Axel Schumacher (University of Wuppertal, Germany)


09:00 1114 Weigang Zhang


Multi-Parameter Optimization Study on the Crashworthiness Design of a Vehicle by Using Global

Sensitivity Analysis and Dynamic Metamodel

Weigang Zhang*, Yang Zhang, Tao Ma, Ting Tang

09:20 1194 Insik Han

(LG Electronics, South Korea)

TV packaging optimization of the frontal drop impact using equivalent static loads

Insik Han*, Youngmyung Lee, Gyung-Jin Park

09:40 1032 Jianguang Fang


Multiobjective optimization of multi-cell tubes with functional graded thickness

Jianguang Fang*, Yunkai Gao, Guangyong Sun, Qing Li

10:00 1177 Axel Schumacher

(University of Wuppertal, Germany)

Combining state of the art meta-models for predicting the behaviour of non-linear crashworthiness

structures for shape and sizing optimizations

Axel Schumacher*, Christopher Ortmann

10:20 1049 Libin Duan


Lightweight design of vehicle structure with tailor rolled blank under crashworthiness

Libin Duan*, Guangyong Sun, Junjia Cui, Tao Chen, Guangyao Li

Room: CLR351 Aerospace Design Optimization 1

Chairs: G. K. Ananthasuresh (Indian Institute of Science, Bengaluru, India) and Timothy Ryan Brooks (University of Michigan, United States)


09:00 1184 Timothy Ryan Brooks

(University of Michigan, United States)

High-fidelity Structural Optimization of a Tow-steered Composite Wing

Timothy Brooks*, John T. Hwang, Graeme J. Kennedy, Joaquim R. R. A. Martins

09:20 1218

G. K. Ananthasuresh

(Indian Institute of Science, Bengaluru,

India)

Topology and Size Optimization of Modular Ribs in Aircraft Wings

A. Rinku, G. K. Ananthasuresh*

09:40 1238 Jaehyun Yoon


Optimal Blade Design of Quad-Rotor Air Vehicle Considering Hovering Thrust and Position Disturbance

Jaehyun Yoon*, Jongsoo Lee

10:00 1164

Jianquan Ge


Technology, China)

Research on Integrated Design and Optimization for Hypersonic-Glide Vehicle

Jianquan Ge*, Longyun Chen, Bin Zhang, Lei Wang

10:20 1450 Shenyan Chen

(Beihang University, China)

Structural Design and Topology Optimization of a University Micro-satellite

Shenyan Chen*, Jing Guo

Tu

esd

ay 9

th J

un

e, 2015

26 WCSMO-11

Session 4


11:00 – 12:40

Room: CLT375 Topology and Shape Optimization 7 (Metamaterials I)

Chairs: Sandro Luis Vatanabe (Polytechnic School of the University of São Paulo, Brazil) and Garuda Fujii (Shinshu University, Japan)


11:00 1429 Scott Townsend


Engineering Negative Refractive Index Materials via Topology Optimization

Scott Townsend*, Shiwei Zhou, Qing Li

11:20 1371

Rasmus Ellebæk Christiansen


Denmark)

Creating Materials with Negative Refraction Index using Topology Optimization

Rasmus Ellebæk Christiansen*, Ole Sigmund

11:40 1144 Garuda Fujii

(Shinshu University, Japan)

Topology optimized carpet cloak by means of a level set based topology optimization

Garuda Fujii*, Masayuki Nakamura

12:00 1127 Namjoon Heo


Structural optimization for cloaking effect using dielectric material based on the phase field method

Namjoon Heo*, Jeonghoon Yoo

12:20 1308

Sandro Luis Vatanabe

(Polytechnic School of University of São

Paulo, Brazil)

Design of acoustic cloaking by using topology optimization and waveguide concept

Sandro Luis Vatanabe*, Emílio Carlos Nelli Silva

Room: CLT273 Robust and Reliability-Based Design Optimization 1

Chairs: Byeng D. Youn (Seoul National University, South Korea) and Po Ting Lin (Chung Yuan Christian University, Taiwan)


11:00 1200 Kyung K. Choi

(The University of Iowa, United States)

Reliability-Based Design Optimization of Wind Turbine Blades for Fatigue Life under Wind Load

Uncertainty

Weifei Hu, Kyung K. Choi*, Hyunkyoo Cho, Nicholas J. Gaul, Olesya I. Zhupanska

11:20 1211 Po Ting Lin

(Chung Yuan Christian University, Taiwan)

Utilization of Gaussian Kernel Reliability Analyses in the Gradient-based Transformed Space for Design

Optimization with Arbitrarily Distributed Design Uncertainties

Po Ting Lin*

11:40 1316 Samy Missoum

(University of Arizona, United States)

Reliability-based Design Optimization of Nonlinear Energy Sinks

Ethan Boroson, Samy Missoum*

12:00 1356 Woochul Lim


Reliability-Based Design Optimization of BIW Considering Variable Uncertainty of Thickness

Woochul Lim*, Junyong Jang, Shinyu Kim, Tae Hee Lee, Jungho Kim, Kyungwon Lee, Changkun Lee, Yongsuk

Kim

12:20 1153

Xiaoke Li

(Huazhong University of Science &

Technology, China)

A Modified Adaptive Sampling Method for Reliability-Based Design Optimization Using SVM Model

Xiaoke Li*, Haobo Qiu, Liang Gao, Wei Li

Room: CLT275 Sensitivity Analysis Methods and Applications 1

Chairs: Ramana V. Grandhi (Wright State University, United States) and Narayanan Pagaldipti (Altair Engineering, Inc., United States)


11:00 1412 Ramana V. Grandhi

(Wright State University, United States)

Sensitivity Analysis of Fluid-Structure Interactions Simulated With Immersed Boundary Approach

Ramana V. Grandhi*, Koorosh Gobal

11:20 1054 Jacob Oest

(Aalborg University, Denmark)

Gradient based structural optimization with fatigue constraints of jacket structures for offshore wind

turbines

Jacob Oest*, Lars Christian Terndrup Overgaard, Erik Lund

11:40 1099

Rahmetalla Nazzeri

(Technical University of Braunschweig,

Germany)

Assessing sensitivities of maneuver load alleviation parameters on buckling reserve factors using

surrogate model based extended Fourier Amplitude Sensitivity Test

Rahmetalla Nazzeri*, Frank Lange, Matthias Haupt, Christophe Sebastien

12:00 1439 Narayanan Pagaldipti

(Altair Engineering, Inc., United States)

Sensitivity and Optimization of Responses from Nonlinear Analyses

Narayanan Pagaldipti*, Shaobin Liu, Raphael Fleury

12:20 1195

Dong Wang

(Northwestern Polytechnical University,

China)

Sensitivity Analysis of Structural Response to External Load Position

Dong Wang*

Tu

esd

ay 9

th Jun

e, 2

015

June 7-12, 2015 27

Room: CLR350 Micro- and Nano-Structural Materials 2

Chairs: Michael Yu Wang (National University of Singapore, Singapore) and Jun Yan (Dalian University of Technology, China)


11:00 1158

Michael Yu Wang

(National University of Singapore,

Singapore)

Optimal Design and Evaluation of Cantilever Probe for Multifrequency Atomic Force Microscopy

Jiandong Cai, Qi Xia, Yangjun Luo, Michael Yu Wang*, Li Zhang

11:20 1061 Dingjie Lu


Surface Effect on Nanoscale Structure: A Numerical Study in terms of Young-Laplace Equation

Dingjie Lu*, Mike Xie, Qing Li, Xiaodong Huang, Shiwei Zhou

11:40 1321

Floris C. M. Van Kempen

(Delft University of Technology,

Netherlands)

Multiphysics design optimization of continuous flow microreactors

Floris C. M. van Kempen*, Matthijs Langelaar, Michiel Kreutzer, Fred van Keulen

12:00 1426

Suguang Dou


Denmark)

Two methods for gradient-based optimization in nonlinear structural dynamics

Suguang Dou*, Jakob S. Jensen

12:20 1116 Jun Yan


Concurrent Multi-scale Optimization of Composite Frame Structure

Jun Yan*, Zunyi Duan, Guozhong Zhao

Room: CLR351 Mechanical Engineering 3 (Mechanical Design)

Chairs: Weihua Li (University of Wollongong, Australia) and Paolo Guarneri (Technical University of Cluj-Napoca, Romania)


11:00 1093 Kangwon Lee


Three-dimensional Light Weight Design of Robot Parts Using the Topology Optimization Method

Kangwon Lee*, Chan-Yul Jung, Seung-Jong Kim, Takayuki Yamada, Kazuhiro Izui, Shinji Nishiwaki, Jeonghoon

Yoo

11:20 1110 Mingzi Zhang

(Tohoku University, Japan)

Manufacture-Oriented Design Optimization for a Flow Diverter Stent Using Lattice Boltzmann Method

and Simulated Annealing

Mingzi Zhang*, Hitomi Anzai, Bastien Chopard, Makoto Ohta

11:40 1131

Paolo Guarneri

(Technical University of Cluj-Napoca,

Romania)

Tradeoff exploration in decomposition-based optimization

Paolo Guarneri*, Margaret M. Wiecek

12:00 1101 Weihua Li

(University of Wollongong, Australia)

Optimal design of a double coil magnetorheological fluid damper with various piston profiles

Guoliang Hu, Zheng Xie, Weihua Li*

12:20 1350

Xiaohong Ding

(University of Shanghai for Science and

Technology, China)

Design Optimization Method of Machine Tool Pedestal Structures

Xiaohong Ding*, Heng Zhang, Xiaohu Dong

Tu

esd

ay 9

th J

un

e, 2015

28 WCSMO-11

Session 5

Tuesday 9th June, 2015

14:00 – 16:00

Room: EAA Topology and Shape Optimization 8 (Additive Manufacturing)

Chairs: Ming Zhou (Altair Engineering, United States) and Akihiro Takezawa (Hiroshima University, Japan)


14:00 1293 Ming Zhou

(Altair Engineering, United States)

Lattice Structures for 3D-Printing

Ming Zhou*, Michael Bogomolny, Raphael Fleury

14:20 1125 Akihiro Takezawa

(Hiroshima University, Japan)

Porous metal by topology optimization and additive manufacturing

Akihiro Takezawa*, Makoto Kobashi, Yuichiro Koizumi, Mitsuru Kitamura

14:40 1432 Christopher James Smith

(University of Sheffield, United Kingdom)

Layout optimization of components suitable for additive manufacture

Christopher Smith*, Matthew Gilbert, Iain Todd

15:00 1103

Ajit Panesar

(University of Nottingham, United

Kingdom)

Design optimization for multifunctional 3D printed structures with embedded functional systems

A. Panesar*, D. Brackett, I. Ashcroft, R. Wildman, R. Hague

15:20 1373 Andrew T. Gaynor

(Johns Hopkins University, United States)

Eliminating Support Material in Additive Manufacturing: A Projection-Based Approach for Maximum

Overhang Constraints

Andrew T. Gaynor*, James K. Guest

15:40 1336

Jannis Greifenstein

(Friedrich-Alexander-Universität

Erlangen-Nürnberg, Germany)

Design optimization with anisotropic materials in the context of additive manufacturing

Jannis Greifenstein*, Michael Stingl

Room: CLT375 Topology and Shape Optimization 9 (Multi-Materials/Multi-Components)

Chairs: Kurt Maute (University of Colorado Boulder, United States) and Yoon Young Kim (Seoul National University, South Korea)


14:00 1073

Kurt Maute

(University of Colorado Boulder, United

States)

On the influence of interface models on the optimum layout of multi-component structures and

material systems

Matthew Lawry, Reza Behrou, Kurt Maute*

14:20 1215 Yoon Young Kim


Topology optimization of 3D suspension linkage system of an automobile by using work transmittance

efficiency based mechanism synthesis formulation

Yoon Young Kim*, Suh In Kim, Byungseong Ahn, Seok Won Kang, Yong-Sub Yi, Joonhong Park

14:40 1220 Seok Won Kang


Topology Optimization of Planar Linkage Systems having Various Joint Types

Seok Won Kang*, Suh In Kim, Yoon Young Kim

15:00 1221 Byungseong Ahn


Simultaneous design of a loading location and structure by topology optimization

Sung Kyu Kwak, Byungseong Ahn*, Suh In Kim, Yoon Young Kim

15:20 1012

Anders Clausen


Denmark)

Topology optimization for coated structures and material interface problems

Anders Clausen*, Erik Andreassen, Ole Sigmund

15:40 1415 James K. Guest


A Multi-Material Topology Optimization Algorithm for Continuum (and other) Structures

James K. Guest*

Room: CLT273 Topology and Shape Optimization 10 (Piezoelectricity)

Chairs: José Miranda Guedes (Instituto Superior Técnico, Lisbon University, Portugal) and Alberto Donoso (University of Castilla – La Mancha, Spain)


14:00 1309

José Miranda Guedes

(Instituto Superior Técnico, Lisbon

University, Portugal)

Piezoelectric Material Tailoring for Vibrations Energy Harvesters Power Optimization

Agostinho Martins Matos, José Miranda Guedes*, K. P. Jayachandran, H. C. Rodrigues

14:20 1115 Xiaopeng Zhang


Topology optimization of piezoelectric structures subjected to transient dynamic loads

Xiaopeng Zhang*, Zhan Kang

14:40 1332

Mariana Moretti


Paulo, Brazil)

Design of Functionally Graded Piezoactuator for transient reponse by means of gain velocity

feedback control through Topology Optimization Method (TOM)

Mariana Moretti*, Emílio C. Nelli Silva

15:00 1241 Alberto Donoso

(University of Castilla – La Mancha, Spain)

Topology optimization of piezo modal transducers with null-polarity phases

Alberto Donoso*, Ole Sigmund

15:20 1290

Ruben A. Salas


Paulo, Brazil)

Topology Optimization Applied to the Dynamic Design of the Laminated Piezocomposites Structures

(LAPS) Used for purposes of Energy Harvesting

Ruben A. Salas*, Emilio C. N. Silva, J. N. Reddy

15:40 1247 David Ruiz

(University of Castilla – La Mancha, Spain)

Optimal Design of Piezoelectric Transducers

David Ruiz*, A. Donoso, J. C. Bellido

Tu

esd

ay 9

th Jun

e, 2

015

June 7-12, 2015 29

Room: CLT275 Design of Composite Materials 1

Chairs: Erik Lund (Aalborg University, Denmark) and Pedro Gonçalves Coelho (Universidade Nova de Lisboa, Portugal)


14:00 1128 Erik Lund

(Aalborg University, Denmark)

Filter Based Discrete Material and Thickness Optimization of Laminated Composite Structures

Erik Lund*, René Sørensen

14:20 1113

Daniël M. J. Peeters


Netherlands)

Structural approximations for composite optimisation

Daniël M. J. Peeters*, Mostafa M. Abdalla

14:40 1433 Pedro Gonçalves Coelho

(Universidade Nova de Lisboa, Portugal)

Convergence analysis of full elastic tensors to homogenization predictions in periodic composite

material design

Pedro Gonçalves Coelho*, L. D. Amiano, J. M. Guedes, H. C. Rodrigues

15:00 1223

Yan Zhang

(China Academy of Space Technology,

China)

Design and optimization of a variable stiffness composite laminate

Yan Zhang*, Fenfen Xiong

15:20 1342

Markus E. Schatz

(TU Munich – Technische Universität

München, Germany)

Optimization of laminated structures considering manufacturing efforts

Markus E. Schatz*, Horst J. Baier

15:40 1424 Haichao An


Laminate Stacking Sequence Optimization Considering Multiple Structural Cases with Two-Level

Approximations and GA

Haichao An*, Shenyan Chen, Hai Huang

Room: CLR350 Topology and Shape Optimization 11 (Metamaterials II)

Chairs: Wei Chen (Northwestern University, United States) and Takayuki Yamada (Kyoto University, Japan)


14:00 1331 Wei Chen

(Northwestern University, United States)

Characterization and Optimization of Quasi-Random Nanophotonic Structures with Intrinsic Robustness

against Fabrication Defects

Shuangcheng Yu, Chen Wang, Zhen Jiang, Cheng Sun, Wei Chen*

14:20 1058 Takayuki Yamada


Optimum design of periodic microstructures for minimal dispersive effects in wave propagation

Takayuki Yamada*, Grégoire Allaire, Kazuhiro Izui, Shinji Nishiwaki

14:40 1262

Jaeyub Hyun



Design and Homogenization of the Acoustic Metamaterial using the Boundary Field Averaging & Its

Applications

Jaeyub Hyun*, Semyung Wang

15:00 1254

Jaesoon Jung



Topology optimization of membrane-type acoustic metamaterial for low frequency sound attenuation

Jaesoon Jung*, Jaeyub Hyun, Semyung Wang

15:20 1392

Zhenyu Liu

(Changchun Institute of Optics, Fine

Mechanics and Physics, China)

Optimization of nano-photonic devices based on transformation optics method

Zhenyu Liu*, Yinghui Cao, Yongmin Liu

15:40 1198

Kepeng Qiu


China)

Optimization design of artificial electromagnetic metamaterials with perfect wave absorption

Kepeng Qiu*, Shuqi Feng, Fuli Zhang, Weihong Zhang, Zijun Liu

Room: CLR351 Approximations with Surrogates or Metamodels 1

Chairs: Nam H. Kim (University of Florida, United States) and Hu Wang (Hunan University, China)


14:00 1056 Raphael T. Haftka

(University of Florida, United States)

Experience with Several Multi-fidelity Surrogate Frameworks

Chanyoung Park, Raphael T. Haftka*, Nam H. Kim

14:20 1457

Vassili Toropov

(Queen Mary University of London,

United Kingdom)

Adaptive sub-space metamodel building for large-scale MDO problems with disparate discipline

attributes

Jonathan Ollar, Vassili Toropov*, Royston Jones

14:40 1008 Hu Wang


Manifold multi-surrogate assisted firefly global optimization

Hu Wang*, Fang Ye, Enying Li, Guangyao Li

15:00 1027

Laura Mainini

(Massachusetts Institute of Technology,

United States)

Data-driven dynamic structural assessment from sparse sensor data

Laura Mainini*, Karen Willcox

15:20 1051 Zheng Li


A multiple points Infill sampling criteria based on Kriging meta model

Zheng Li*, Shilun Ruan, Changyu Shen

15:40 1252

Zongyu Wu


Technology, China)

A RBF neural network modeling method based on sensitivity analysis and Pareto law

Zongyu Wu*, Yong Chen, Wen Yao, Xiaoqian Chen

Tu

esd

ay 9

th J

un

e, 2015

30 WCSMO-11

ISSMO/Springer Prize 2013

The ISSMO/Springer Prize for Young Scientist 2013 was awarded to:

Dr. Christopher J. Brampton

The Prize is awarded to Dr. Brampton for an excellent presentation and

outstanding paper read at the ISSMO 10 th World Congress of

Structural and Multidisciplinary Optimization (WCSMO-10) held in

Orlando, United States, May 2013

The presentation title is

“Optimization of Two Steered Fiber Orientation Using the Level Set Method”

Christopher J. Brampton and H. Alicia Kim

WCSMO-11 Early Career Researcher Fellowships

To expand the new generation of scientists in structural and

multidisciplinary optimization research, up to 10 Congress Early Career

Researcher (ECR) travel fellowships are awarded to those eligible

participants who are current postgraduate students or postdocs

(within five years of the PhD completion). The awards are decided by

the selection panel within the WCSMO-11 Local Organizing Committee,

chaired by Professor Yimin (Mike) Xie, RMIT University, Australia.

Guangyong Sun Hunan University, China

Liang Xia Sorbonne universités, Université de technologie de Compiègne, France

Mingdong Zhou Technical University of Denmark, Denmark

David J . Munk University of Sydney, Australia

Onur Deniz Technische Universität Braunschweig, Germany

Hemant Kumar Singh University of New South Wales, Australia

Saeid Hedayatrasa University of South Australia , Australia

Yuqing Zhou University of Michigan, United States

Loïc Brevault Onera - The French Aerospace Lab, France

Meng Xu Technical University of Cluj-Napoca, Romania

Tu

esd

ay 9

th Jun

e, 2

015

June 7-12, 2015 31

General Assembly


16:20 – 18:00


Please join us for the General Assembly , to be held at Eastern Avenue

Auditorium

Agenda

1. President’s report

2. Secretary General’s report

3. Treasurer’s report

4. SMO Editor’s report

5. Election of ISSMO Executive Committee members (2015-2019)

6. ISSMO Springer prize and brief presentation by the recipient

7. Call for proposals for the WCSMO-11 ISSMO Springer prize

8. WCSMO-11 Congress Fellowship Award

9. Call for proposals for the WCSMO-12

10. Other business

Tu

esd

ay 9

th J

un

e, 2015

32 WCSMO-11

Session 6

Wednesday 10 th June, 2015

9:00 – 10:40

Room: EAA Topology and Shape Optimization 12 (GA/Evolution)

Chairs: Kiichiro Sawada (Kagoshima University, Japan) and Kalyan Shankar Bhattacharjee (University of New South Wales, Canberra, Australia)


9:20 1079 Kiichiro Sawada

(Kagoshima University, Japan)

Topology optimizations of structures with inverse Fourier transform and real coded GA

Kiichiro Sawada*

9:40 1041

Kalyan Shankar Bhattacharjee

(University of New South Wales,

Canberra, Australia)

A Novel Constraint Handling Strategy for Expensive Optimization Problems

Kalyan Shankar Bhattacharjee*, Tapabrata Ray

10:00 1257 Yanjie Liu


Stacking Sequence Optimization of Composite Corrugated Bearing Cylinder with Two-level

Approximation and GA

Yanjie Liu*, Shenyan Chen, Haichao An, Hai Huang, Haiquan Ma, Feng Gao, Gang Bai

10:20 1123 Xiaofang Shui


Simultaneous Optimization of Stiffeners Distribution and Sizing using Two-Level Approximations and

Genetic Algorithm

Shenyan Chen, Xiaofang Shui*

Room: CL375 Topology and Shape Optimization 13 (Thermofluids I)

Chairs: Gil Ho Yoon (Hanyang University, South Korea) and Daisuke Murai (Toyota Central Research and Development Laboratories Institute, Japan)


9:00 1265 Renato Picelli

(University of Campinas, Brazil)

Topology Optimization considering design-dependent Stokes flow loads

Renato Picelli*, William Martins Vicente, Renato Pavanello, Fred van Keulen

9:20 1276 Kazuo Yonekura

(IHI Corporation, Japan)

A topology optimization method for a flow field using the lattice Boltzmann method considering wall

boundary conditions

Kazuo Yonekura*, Yoshihiro Kanno

9:40 1302 Kentaro Yaji


Level set-based topology optimization using the lattice Boltzmann method considering two-phase fluid

flows

Kentaro Yaji*, Takayuki Yamada, Masato Yoshino, Toshiro Matsumoto, Kazuhiro Izui, Shinji Nishiwaki

10:00 1383 Gil Ho Yoon


Topology optimization for turbulent flow with RANS model

Gil Ho Yoon*

10:20 1340

Haojie Lian


Denmark)

Combined Topology and Shape Optimization with the DSC method for Stokes Flow Problems

Haojie Lian*, Ole Sigmund

Room: CLT273 Multidisciplinary Optimization 2 (Acoustics)

Chairs: Deqing Yang (Shanghai Jiao Tong University, China) and Baoshan Liu (China University of Petroleum, China)


9:20 1411 Baoshan Liu

(China University of Petroleum, China)

Acoustic radiation and sensitivity analysis of a random excited structure based on FEM/IBEM combined

with PEM

Baoshan Liu*, Liyong Tong

9:40 1204 Quang Dat Tran

(Sejong University, South Korea)

Topology Optimization of Underwater Acoustic Lenses

Quang Dat Tran*, Gang-Won Jang, Hyu-Sang Kwon, Wan-Ho Cho, Seung-Hyun Cho, Yo-Han Cho, Hee-Seon

Seo

10:00 1279 Deqing Yang

(Shanghai Jiao Tong University, China)

Multidisciplinary Design Optimization of Sound Radiation from Underwater Double Cylindrical Shell

Structure

Deqing Yang*, Guilian Yi, Jiapeng Cheng

10:20 1147 Yuki Noguchi


Level set-based topology optimization for the design of a wave motion converter in an acoustic-elastic

interaction system

Yuki Noguchi*, Takayuki Yamada, Masaki Otomori, Kazuhiro Izui, Shinji Nishiwaki

Wed

nesd

ay 1

0th Ju

ne, 2

015

June 7-12, 2015 33

Room: CLT275 Design of Composite Materials 2

Chairs: Kai-Uwe Bletzinger (Technische Universität München, Germany) and Peter D. Dunning (University of Bath, United Kingdom)


9:00 1317 Yuqing Zhou

(University of Michigan, United States)

Multi-Objective Topology Optimization of Composite Structures Considering Resin Filling Time

Yuqing Zhou*, Kazuhiro Saitou

9:20 1421

Onur Deniz

(Technische Universität Braunschweig,

Germany)

Production Based Multicriteria Design Optimization of an Unconventional Composite Fuselage Side

Panel by Evolutionary Strategies and Surrogate Models of Manufacturability Analysis

Onur Deniz*, Peter Horst, Carsten Schmidt

9:40 1267

Yasser M. Meddaikar

(DLR - Institute of Aeroelasticity,

Germany)

Blended Composite Optimization combining Stacking Sequence Tables and a Modified Shepard’s

Method

Yasser M. Meddaikar*, François-Xavier Irisarri, Mostafa M. Abdalla

10:00 1214

Long Chen


Technology, China)

Optimization based on complex B-spline solid

Long Chen*, Jianwei Gao, Yingying Wang

10:20 1084 Kenichi Ikeya


Multi-objective Free-form Optimization for Shape and Thickness of Shell Structures with Composite

Materials

Kenichi Ikeya*, Masatoshi Shimoda

Room: CLR350 Optimization Algorithms 1

Chairs: Anirban Basudhar (Livermore Software Technology Corporation, United States) and Jose F. Aguilar Madeira (University of Lisbon, Portugal)


9:20 1053 Jose F. Aguilar Madeira

(University of Lisbon, Portugal)

Solving Multiobjective Optimization Problems with Direct MultiSearch

Jose F. Aguilar Madeira*

9:40 1150

Michael Stingl

(Friedrich-Alexander-Universität

Erlangen-Nürnberg, Germany)

A New Algorithm for the Optimal Design of Anisotropic Materials

Michael Stingl*

10:00 1094

Susana Rojas-Labanda


Denmark)

An efficient second-order SQP method for structural topology optimization

Susana Rojas-Labanda*, Mathias Stolpe

10:20 1146

Anirban Basudhar

(Livermore Software Technology

Corporation, United States)

Multi-objective Optimization Using Adaptive Explicit Non-dominated Region Sampling

Anirban Basudhar*

Room: CLR351 Approximations with Surrogates or Metamodels 2

Chairs: Masao Arakaw (Kagawa University, Japan) and Christian Gogu (Universite Toulouse III, France)


9:00 1239 Masao Arakawa

(Kagawa University, Japan)

Zooming in Surrogate Optimization Using Convolute RBF

Masao Arakawa*

9:20 1335 Yiming Zhang


One-dimensional Function Extrapolation Using Surrogates

Yiming Zhang*, Nam H. Kim, Chan-Young Park, Raphael T. Haftka

9:40 1216

Xiwen Cai

(Huazhong University of Science &

Technology, China)

An efficient sequential sampling approach based on cross-validation for deterministic computer

simulations

Xiwen Cai*, Haobo Qiu, Liang Gao

10:00 1379

Jinglai Wu

(University of Technology, Sydney,

Australia)

A new high‐order polynomial surrogate model using sequential sampling method

Jinglai Wu*, Zhen Luo, Nong Zhang

10:20 1005 Zhaojun Li


A Parallel Optimization Method Based on Kriging Model

Zhaojun Li*, Xicheng Wang

Wed

nesd

ay 1

0th

Ju

ne, 2015

34 WCSMO-11

Poster Session


11:00 – 12:40

Room: Eastern Avenue Foyer

ID Presenting Author Title

1001

Jikai Fan

(Huazhong University of Science and

Technology, China)

Improvement researches on involute tooth profile

Jikai Fan*, Youmin Hu, Yanlei Li, Xiong Jing, Xiaokun Duan

1007 Hu Wang


CAD/CAE integrated reanalysis assisted optimization system for vehicle design

Hu Wang*, Enying Li, Guanxin Huang, Guangyao Li

1042

Yonghu Wang


China)

Experimental and numerical study of water impact investigations for aircraft crashworthiness analysis

Yonghu Wang*, Shu Dongwei, Y. Fujii, A. Takita, R. Araki, Hu Wei

1043

Vu Truong Vu

(Ho Chi Minh City University of Transport,

Vietnam)

Weight Minimization of Trusses with Natural Frequency Constraints

Vu Truong Vu*

1050 Xueguan Song


Reliability based design optimization for high-strength steel tailor welded thin-walled structures under

crashworthiness

Xueguan Song*, Guangyong Sun, Qing Li

1075 Xue-dao Shu


Design and optimization of billet structure about High-speed Rail bearing in cold rolling

Xue-dao Shu*, Ji-dong Ma, Jie He, Bao-shou Sun, Wen-fei Peng

1080 Lilin Wang


Life Cycle Vibration Sensation Rate Evaluation Model for the Optimal Human Comfort Design of Super Tall

Buildings

Lilin Wang*, Yimin Zheng, Tianyi Yu, Xin Zhao

1082 Xi Zhan


Parameter Optimization for the Integrated Optimal Design of Super Tall Buildings with Viscous Damping Walls

Xi Zhan*, Xin Zhao, Yimin Zheng

1095 Hak Yong Lee


Shape Optimization of a Nanoparticle for Plasmonic Enhancement in a Small Gap

Hak Yong Lee*, Jeonghoon Yoo

1122 Baoshou Sun


Optimization of Process Parameters for Three-roll Skew Rolling Based on Design of Experiment (DOE)

Baoshou Sun*, Guangxing Huang, Wenfei Peng, Xuedao Shu, Lu Wang

1126

Wensheng Wang

(Henan University of Science and

Technology, China)

Reduced super beam based approach to finite element model updating of beam-type structures

Wensheng Wang*, Haojie Wei, Zhonghua Hou

1133 Ole Sigmund

(Technical University of Denmark, Denmark)

Topology Optimization of compliant mechanism design using a constraint on the maximum stress

Daniel Milbrath De Leon, Joe Alexandersen, Jun Sergio Ono Fonseca, Ole Sigmund*

1134 Ding Chen


Simulation Study on the Prediction of Dangerous Conditions for Occupant in a Running Vehicle Equipped with

Airbag

Weigang Zhang, Ding Chen*

Wed

nesd

ay 1

0th Ju

ne, 2

015

June 7-12, 2015 35

Room: Eastern Avenue Foyer

ID Presenting Author Title

1169

Wen Yao

(National University of Defense Technology,

China)

An active subspace approach to multidisciplinary robust design of small satellites

Xingzhi Hu, Xiaoqian Chen, Geoffrey T. Parks, Wen Yao*, Pranay Seshadri

1172 Guilian Yi


A TIMP Method for Topology Optimization with Displacement and Stress Constraints in Multiple Loading Cases

Guilian Yi*, Yunkang Sui, Byeng D. Youn

1243

Bo P. Wang

(University of Texas at Arlington, United

States)

Optimal Design of a Parallel Beam System with Elastic Supports to Minimize Flexural Response to Harmonic

Loading

Bret R. Hauser, Bo P. Wang*

1281 Anna-Lena Beger


Application of a Multi-Objective Optimization Approach on Sandwich Structures

Liliane Ngahane Nana, Thomas Fieder, Anna-Lena Beger*, Jörg Feldhusen

1289 Erik Andreassen


Optimal microstructures

Erik Andreassen*, Ole Sigmund

1345 Haojie Lian


Combined Topology and Shape Optimization with the DSC method for Stress Constraint Problems

Haojie Lian*, Asger N. Christiansen, Daniel A. Tortorelli, Niels Aage, Ole Sigmund

1301 Karoly Jarmai

(University of Miskolc, Hungary)

Solving Multiple Tour Multiple Traveling Salesman Problem With Evolutionary Programming

László Kota, Karoly Jarmai*

1305

Paolo Guarneri

(Technical University of Cluj-Napoca,

Romania)

An efficient parallel coordination method for decomposition based optimization using two duality theorems

Meng Xu, Georges Fadel, Margaret M. Wiecek, Paolo Guarneri*

1417 Kiichiro Sawada


Topology optimizations of soft elastic plates for seismic response control of building structures

Kiichiro Sawada*, Tsubasa Yamashita, Takumi Goto

1420 Dongchen Qin

(Zhengzhou University, China)

Conceptual Design of Box Beam Based on Three-dimensional Topology Optimization

Dongchen Qin*, Peng Du, Qiang Zhu, Junjie Yang

1438 Josephine V. Carstensen


New algorithms for considering manufacturing constraints in topology optimization

Josephine V. Carstensen*, Andrew T. Gaynor, James K. Guest

1455 Guangyong Sun


Reliability-based design optimization of vehicle front-end structure for pedestrian lower extremity protection

Guangyong Sun*, Xiaojiang Lv, Jianguang Fang, Xianguang Gu, Qing Li

1459 Ali Entezari


Optimization of bone tissue scaffolds fabricated by robocasting technique

Ali Entezari*, Zhongpu Zhang, Junning Chen, Qing Li

Wed

nesd

ay 1

0th

Ju

ne, 2015

36 WCSMO-11

Session 7

Wednesday 10th June, 2015

14:00 – 16:00

Room: EAA Topology and Shape Optimization 14

Chairs: James K. Guest (Johns Hopkins University) and Zhan Kang (Dalian University of Technology, China)


14:00 1120

Ole Sigmund


Denmark)

On the optimality of Michell structures

Ole Sigmund*, Niels Aage, Erik Andreassen

14:20 1277 Alejandro R. Diaz

(Michigan State University, United States)

A Computational Platform for Optimal Design of Deformable Polyhedral Structures

Alejandro R. Diaz*, Kazuko Fuchi

14:40 1310 Nam H. Kim


Load-Path Design and Control Using Topology Optimization

Soobum Lee, Nam-Ho Kim*, James Joo

15:00 1454 Zhan Kang


Topology optimization using mesh-independent point-wise density interpolation

Zhan Kang*, Yiqiang Wang

15:20 1010

Ashok D. Belegundu

(The Pennsylvania State University, United

States)

A fast fixed point algorithm for topology optimization with multiple loading conditions

Ashok D. Belegundu*

15:40 1011 Christian Gogu

(Universite Toulouse III, France)

On the fly construction of reduced order models for topology optimization

Christian Gogu*

Room: CLT375 Topology and Shape Optimization 15 (Thermofluids II)

Chairs: Emílio Carlos Nelli Silva (Polytechnic School of University of São Paulo, Brazil) and Xiaoping Qian (University of Wisconsin-Madison, United States)


14:00 1136

Emílio Carlos Nelli Silva


Paulo, Brazil)

Design of Laminar Flow Machine Rotor By Using Topology Optimization Method

Luis Fernando Nogueira de Sá, Juan Saenz Romero, Emílio Carlos Nelli Silva*

14:20 1086

Daisuke Murai

(Toyota Central Research and

Development Laboratories Institute,

Japan)

Shape Optimization by using Reaction Diffusion Equations

Daisuke Murai*, Atsushi Kawamoto, Tuguo Kondoh, Tadayoshi Matsumori

14:40 1072

Xiaoping Qian

(University of Wisconsin-Madison, United

States)

Continuous adjoint based topology optimization of a constrained thermal-fluid system

Xiaoping Qian*, Ercan M. Dede

15:00 1329

Ricardo Cesare Roman Amigo

(University of Sao Paulo, Brazil

Imperial College London, United

Kingdom)

Design of Functionally Graded Adsorption Beds for Gas Storage

Ricardo Cesare Roman Amigo*, R. W. Hewson, E. C. N. Silva

15:20 1422

Sebastian Nørgaard


Denmark)

Topology optimization of unsteady fluid flow patterns using the lattice Boltzmann method

Sebastian Nørgaard*, Boyan Lazarov, Ole Sigmund

15:40 1034 Yifei Wang


A Direct Optimal Control Strategy for Valves in Heat Exchanger Networks and Experimental Validations

Yifei Wang*, Qun Chen


Chairs: Tae Hee Lee (Hanyang University, South Korea) and Robert E. Melchers (University of Newcastle, Australia)


14:00 1444 Tomohiro Nagano


Robust shape optimization method for shell structure with unknown loadings

Tomohiro Nagano*, Masatoshi Shimoda

14:20 1152 Zhifang Fu


A Novel Anti-optimization Method for Structural Robust Design under Uncertain Loads

Zhifang Fu*, Chunjie Wang, Junpeng Zhao

14:40 1363 Junyong Jang


Non-parametric approach for uncertainty-based multidisciplinary design optimization considering

discrete information

Su-gil Cho, Junyong Jang*, Shinyu Kim, Sanghyun Park, Minuk Lee, Jong-Su Choi, Hyung-Woo Kim, Sup Hong,

Tae Hee Lee

15:00 1141 Robert E. Melchers

(University of Newcastle, Australia)

Data based materials numerical modelling for FPSO safety and reliability optimization

Robert E. Melchers*, Andrew E. Potts

15:20 1175 Di Wu


Interval buckling analysis of steel structures using mathematical programming approach

Di Wu*, Wei Gao, Francis Tin-Loi

Wed

nesd

ay 1

0th Ju

ne, 2

015

June 7-12, 2015 37


Chairs: Manuel Julio García-Ruiz (Universidad EAFIT, Colombia) and Manfred Heller (Defence Science and Technology Organisation, Australia)


14:00 1352 Manuel Julio García-Ruiz

(Universidad EAFIT, Colombia)

Shape Optimisation of a Gas Injector

Ruber Arley Ruiz-Mesa, Manuel Julio García-Ruiz*

14:20 1385

Manfred Heller



Overview and lessons from recent applications of rework shape optimisation for aircraft structural life

extension: 2005 -2015

Manfred Heller*, Xiaobo Yu, Ron Wescott

14:40 1013 David J. Munk


Aerothermoelastic Structural Topology Optimisation for a Hypersonic Transport Aircraft Wing

David J. Munk*, Gareth A. Vio, Grant Steven

15:00 1052 Maxim Tyan

(Konkuk University, South Korea)

A Flying Wing UCAV Design Optimization Using Global Variable Fidelity Modeling

Maxim Tyan*, Nhu Van Nguyen, Jae-Woo Lee

15:20 1160

Vasily Chedrik

(Central Aerohydrodynamic Institute

(TsAGI), Russia)

Structural design of aircraft wing based on topology and global-local optimization

Vasily Chedrik*, Sergey Tuktarov

Room: CLR350 Topology and Shape Optimization 16 (Nonlinearity)

Chairs: Shutian Liu (Dalian University of Technology, China) and Mathias Wallin (Lund University, Sweden)


14:00 1045 Mathias Wallin

(Lund University, Sweden)

Topology optimization of geometrically non-linear structures in the deformed state

Mathias Wallin*, Matti Ristinmaa

14:20 1017 Shintaro Kosaka


Shape Optimization Method of Shell Structures Concerned with Material and Geometrical Nonlinearity

Shintaro Kosaka*, Masatoshi Shimoda

14:40 1191

Kyeong-Soo Yun

(Korea Advanced Institute of Science &


Topology optimization of rubber bushing with viscoelastic material

Kyeong-Soo Yun*, Sung-Jae Heo, Sung-Kie Youn

15:00 1168 Schalk Kok

(University of Pretoria, South Africa)

Optimizing snap-through structures by using gradient-only algorithms

Schalk Kok*, Daniel N. Wilke

15:20 1458 Shutian Liu


Microstructural topology optimization of viscoelastic materials for maximum modal loss factor of

macrostructures

Shutian Liu*, Wenjiong Chen

15:40 1292 Josephine V. Carstensen


Topology Optimization of Cellular Materials for Properties Governed by Nonlinear Mechanics

Josephine V. Carstensen*, James K. Guest

Room: CLR351 Design Optimization in Civil and Structural Engineering 2

Chairs: Hemant Kumar Singh (University of New South Wales, Australia) and Wei Gao (University of New South Wales, Australia)


14:00 1046 Hemant Kumar Singh


Many-objective Optimization in Engineering Design: Case Studies Using a Decomposition Based

Evolutionary Algorithm

Hemant Kumar Singh*, Tapabrata Ray

14:20 1171 Moacir Kripka

(University of Passo Fundo, Brazil)

Optimization of Reinforced Concrete Frames by Harmony Search Method

Moacir Kripka*, Deise Boito, Juliana Triches, Guilherme Fleith de Medeiros

14:40 1163

Yoyong Arfiadi

(Atma Jaya Yogyakarta University,

Indonesia)

Cross Sections and Prestressing Forces Optimizations of Prestressed Concrete Beams

Yoyong Arfiadi*, Alfian Wiranata Zebua

15:00 1192

Seongmin Kim



Case Study of Queue Growth Equalization for Urban Traffic Signal Optimization

Seongmin Kim*, Jihye Byun, Kitae Jang, In Gwun Jang

15:20 1081 Tao Shi


Integrated Optimal Life Cycle Design of Super Tall Buildings with Viscous Dampers

Xin Zhao, Tao Shi*

Wed

nesd

ay 1

0th

Ju

ne, 2015

38 WCSMO-11

Session 8


16:20 – 18:00

Room: EAA Design Optimization in Civil and Structural Engineering 3

Chairs: Yi-Min (Mike) Xie (RMIT University, Australia) and Wolfgang Achtziger (Friedrich-Alexander University Erlangen-Nürnberg, Germany)


16:20 1197 Yi-Min (Mike) Xie


Topology Optimization for Conceptual Architectural Design

Yi-Min (Mike) Xie*

16:40 1263

Wolfgang Achtziger

(Friedrich-Alexander University Erlangen-

Nürnberg, Germany)

Topology Optimization of Discrete/Discretized Structures: On Limiting Displacements in Designs with

Singular Stiffness Matrix and Some Implications on Optimality Conditions

Wolfgang Achtziger*

17:00 1129 Ryota Nonami


Study on Optimization for Large Structures using Hybrid GA

Ryota Nonami*, Mitsuru Kitamura, Akihiro Takezawa

17:20 1188 Keunhyoung Park


Distributed NSGA-II for seismic retrofitting optimization with multi-core PC cluster

Keunhyoung Park*, Hyo Seon Park

17:40 1346 Saranthip Rattanaserikiat


Topology Optimization of Truss and Frame Structures Considering Constructability Costs

Mu Zhu, Saranthip Rattanaserikiat*, James K. Guest

Room: CLT375 Topology and Shape Optimization 17 (Robustness)

Chairs: Frederic Nicolas Gillot (École centrale de Lyon, France) and Carl-Johan Thore (Linköping University, Sweden)


16:20 1096 Carl-Johan Thore

(Linköping University, Sweden)

Large-scale robust topology optimization under load uncertainty

Carl-Johan Thore*, Erik Holmberg, Anders Klarbring

16:40 1377 Frederic Nicolas Gillot

(École centrale de Lyon, France)

Robust shape optimization under vibroacoustic criteria and uncertain parameters

Frédéric Gillot*, Renata Troian, Koji Shimoyama, Sebastien Besset

17:00 1130 Ning Chen


Topology optimization of structures with interval random parameters

Ning Chen*, Dejie Yu, Baizhan Xia, Jian Liu

17:20 1354 Jiaxin Zhang


Topology optimization under uncertainty using adaptive Monte Carlo simulation

Jiaxin Zhang*, James K. Guest, Michael D. Shields

17:40 1105 Yoshiaki Nakazawa

(Osaka Prefecture University, Japan)

Robust topology optimization of thin plate structure under concentrated load with uncertain load point

Yoshiaki Nakazawa*, Nozomu Kogiso, Takayuki Yamada, Shinji Nishiwaki


Chairs: Hae Chang Gea (Rutgers University, United States) and Peng Hao (Dalian University of Technology, China)


16:20 1414 Hae Chang Gea

(Rutgers University, United States)

Topology Optimization with Non-probabilistic Load Uncertainty

Wei Song, Euihark Lee, Hae Chang Gea*

16:40 1378 Yang Yang


Topology Optimization of Structures under Random Excitations

Yang Yang*, Mu Zhu, Michael D. Shields, James K. Guest

17:00 1213

Rodney Owen Persky

(Queensland University of Technology,

Australia)

Robust Design and Optimisation of a Radial Turbine within a Supercritical CO2 Solar Brayton Cycle

Rodney Owen Persky*, Emilie Sauret, Andrew Beath

17:20 1230

Wen Yao


Technology, China)

A mixed uncertainty analysis algorithm based on limit state surrogate and interval grouping strategy

Wen Yao*, Xiaoqian Chen, Yong Zhao, Jian Zhang

17:40 1124 Peng Hao


Reliability-Based Optimum Design of Stiffened Panels under Multi-source Uncertainties

Peng Hao*, Bo Wang, Gang Li, Zeng Meng

Wed

nesd

ay 1

0th Ju

ne, 2

015

June 7-12, 2015 39

Room: CLT275 Design Optimization in Multiscale Problems 2

Chairs: Tomasz Lewiński (Warsaw University of Technology, Poland) and Zhen Luo (University of Technology, Sydney, Australia)


16:20 1039

Tomasz Lewiński

(Warsaw University of Technology,

Poland)

Topology optimization of continuum structures made of non-homogeneous materials of isotropic or

cubic symmetry

Sławomir Czarnecki, Radosław Czubacki, Tomasz Lewiński*, Paweł Wawruch

16:40 1035

Mingdong Zhou


Denmark)

Achieving minimum length scale in topology optimization by geometric constraints

Mingdong Zhou*, Boyan S. Lazarov, Fengwen Wang, Ole Sigmund

17:00 1394

Zhen Luo

(University of Technology, Sydney,

Australia)

Integrated design of cellular materials and structures using the topological shape optimization

Hao Li, Zhen Luo*, Liang Gao

17:20 1176 Junji Kato

(Tohoku University, Japan)

Multiscale topology optimization for hyperelastic material

Junji Kato*, Daishun Yachi, Hiroya Hoshiba, Kenjiro Terada, Takashi Kyoya

Room: CLR350 Structural Optimization 1 (Damage)

Chairs: Raj Das (University of Auckland, New Zealand) and Kazuyuki Hanahara (Kobe University, Japan)


16:20 1069 Raj Das

(University of Auckland, New Zealand)

Fatigue life optimisation of damage tolerant structures using design space exploration

Raj Das*, Rhys Jones

16:40 1396 Kazuyuki Hanahara

(Kobe University, Japan)

Structural Damage Identification by Means of Neural Network

Kazuyuki Hanahara*, Yukio Tada

17:00 1250 Lise Noël

(University of Liège, Belgium)

Damage process sensitivity analysis using an XFEM-Level Set framework

Lise Noël*, Pierre Duysinx, Kurt Maute

17:20 1402 Wenjun Li


Stability-ensured topology optimization of boom structures with stress constraints

Wenjun Li*, Qicai Zhou, Zhen Jiang, Wei Chen

Room: CLR351 Mechanical Engineering 4 (Metal Forming)

Chairs: Satoshi Kitayama (Kanazawa University, Japan) and Schalk Kok (University of Pretoria, South Africa)


16:20 1375 Satoshi Kitayama

(Kanazawa University, Japan)

Simultaneous optimization of initial blank shape and blank holder force trajectory for square cup deep

drawing using sequential approximate optimization

Satoshi Kitayama*, Marina Saikyo, Kiichiro Kawamoto, Ken Yamamichi

16:40 1102 Robert Dienemann

(University of Wuppertal, Germany)

Topology optimization considering the requirements of deep-drawn sheet metals

Robert Dienemann*, Axel Schumacher, Sierk Fiebig

17:00 1180 Bin Wang

(Griffith University, Australia)

Likelihood of buckling mode interaction in shape optimisation of manufacturable cold-formed steel

columns

Bin Wang*, Benoit P. Gilbert, Hong Guan, Lip H. Teh

Wed

nesd

ay 1

0th

Ju

ne, 2015

40 WCSMO-11

Session 9

Thursday 11 th June, 2015

09:00 – 10:40

Room: EAA Topology and Shape Optimization 18 (Dynamics I)

Chairs: José C. Bellido (Universidad de Castilla-La Mancha, Spain) and Bin Niu (Dalian University of Technology, China)


09:00 1091

José C. Bellido

(Universidad de Castilla-La Mancha,

Spain)

Peridynamics and topology optimization

José C. Bellido*

09:20 1112 Kun Yan


Topology optimization of plate structures subject to initial excitations for minimum dynamic

performance index

Kun Yan*, Gengdong Cheng

09:40 1182

Alexander Held

(Hamburg University of Technology,

Germany)

Topology Optimization of Members of Dynamically Loaded Flexible Multibody Systems using Integral

Type Objective Functions and Exact Gradients

Alexander Held*, Sven Knüfer, Robert Seifried

10:00 1222 Jong Wook Lee


Structural optimization of dynamic system considering the fatigue life in frequency domain

Jong Wook Lee*, Gil Ho Yoon, Seung Hyun Jeong, Jun Hwan Kim

10:20 1225 Bin Niu


On objective functions of minimizing the vibration response of continuum structures subjected to

external excitation

Bin Niu*, Xiaomeng He, Rui Yang

Room: CLT375 Topology and Shape Optimization 19 (Truss)

Chairs: Yoshihiro Kanno (University of Tokyo, Japan) and Tomasz Sokół (Warsaw University of Technology, Poland)


09:00 1181

Tomasz Sokół

(Warsaw University of Technology,

Poland)

On the numerical optimization of multi-load spatial Michell trusses using a new adaptive ground

structure approach

Tomasz Sokół*, George I. N. Rozvany

09:20 1306

Nicoló Pollini

(Technion – Israel Institute of Technology,

Israel)

Minimum-cost topology and sizing optimization of viscous dampers for seismic retrofitting of 3-D frame

structures

Nicoló Pollini*, Oren Lavan, Oded Amir

09:40 1044 Yoshihiro Kanno

(Tokyo Institute of Technology, Japan)

Truss Topology Optimization under Constraints on Number of Different Design Variables

Yoshihiro Kanno*

10:00 1296 Linwei He

(University of Sheffield, United Kingdom)

Use of geometry optimization to rationalize layout optimized trusses

Linwei He*, Matthew Gilbert

10:20 1425 Yohei Yokosuka


Structural Optimization for Stabilized and Stiffened Structural System by Tension Members

Yohie Yokosuka*, Toshio Honma

Room: CLT173 Structural Optimization 2 (Commercial and Industry)

Chairs: Gang-Won Jang (Sejong University, South Korea) and Miguel A. A. S. Matos (Dassault Systèmes Deutschland GmbH, Germany)


09:00 1295 Gang-Won Jang

(Sejong University, South Korea)

Topology optimization of industrial robots considering system-level performance

Gang-Won Jang*, Byung Jun Kim, Jae Young Lee, Jin Gyun Park

09:20 1037 Wook-han Choi


Comparison of some commercial software systems for structural optimization

Wook-han Choi*, Cheng-guo Huang, Jong-moon Kim, Gyung-Jin Park

09:40 1322

Sierk Fiebig

(Volkswagen AG, Braunschweig,

Germany)

Future challenges for topology optimization for the usage in automotive lightweight design

technologies

Sierk Fiebig*, Jürgen Sellschopp, Holger Manz, Thomas Vietor, Joachim K. Axmann, Axel Schumacher

10:00 1427

Miguel A. A. S. Matos

(Dassault Systèmes Deutschland GmbH,

Germany)

Sizing Optimization for Industrial Applications

Miguel A. A. S. Matos*, Peter M. Clausen, Claus B.W. Pedersen

Th

ursd

ay 1

1th Ju

ne, 2

015

June 7-12, 2015 41

Room: CLT175 Automotive Engineering 3

Chairs: Dooho Lee (Dongeui University, South Korea) and Cheol Kim (Kyungpook National University, South Korea)


09:00 1074 Takanobu Saito

(JFE Steel Corporation, Japan)

A study of optimization for automotive parts and structures by using inertia relief

Takanobu Saito*, Jiro Hiramoto, Toshiaki Urabe

09:20 1196 Wei Zhong


Topology and sizing optimisation of integral bus chassis with the use of a cooperative coevolutionary

genetic algorithm with independent ground structures

Wei Zhong*, Ruiyi Su, Liangjin Gui, Zijie Fan

09:40 1440 Dooho Lee

(Dongeui University, South Korea)

Parameterization Scheme in a Large Automotive NVH Model for Statistical Validation

Dooho Lee*, Jong-Hyun Kwon, Hyun-Seok Kim

10:00 1149 Dongchen Qin

(Zhengzhou University, China)

Simulation and Optimization of MPV Suspension System Based on ADAMS

Dongchen Qin*, Junjie Yang, Qiang Zhu, Peng Du

10:20 1258

Cheol Kim

(Kyungpook National University, South

Korea)

Topology Optimum Design of a Commercial Vehicle Coupling Structure Considering Sliding Frictional

and Driving Loads

Seungyoon Lee, Cheol Kim*, Namjin Jeon

Room: CLR350 Large Scale and High Performance Computing

Chairs: Erik Andreassen (Technical University of Denmark, Denmark) and Alemseged Gebrehiwot Weldeyesus (Technical University of Denmark, Denmark)


09:00 1090

Alemseged Gebrehiwot Weldeyesus


Denmark)

On Solving Large-Scale Free Material Optimization Problems

Alemseged Gebrehiwot Weldeyesus*, Mathias Stope

09:20 1268 Fenfen Xiong

(Beijing Institute of Technology, China)

Parallel Particle Swarm Optimization on Graphical Processing Unit with Application to Trajectory

Optimization

Qi Wu, Fenfen Xiong*

09:40 1299

Erik Andreassen


Denmark)

Extremely large-scale topology optimization

Erik Andreassen*, Niels Aage, Boyan S. Lazarov, Ole Sigmund

10:00 1210

Seongbin Kang



Accuracy Improvement of MPP-Based Dimension Reduction Method Using the Eigenvectors of the

Hessian Matrix

Seongbin Kang*, Ikjin Lee, Jongmin Lim


Chairs: Vladimir Balabanov (Boeing, Australia) and Moritz Frenzel (BMW Group, Germany)


09:00 1436 Moritz Frenzel

(BMW Group, Germany)

Multidisciplinary optimization and integration requirements for large-scale automotive and aerospace

design work

BMW: Moritz Frenzel*, Daniel Heiserer, David Keller, Markus Schemat

Boeing: Vladimir Balabanov, Rodney Dreisbach, Steve Georgiadis

09:20 1087

Christopher Chahine

(von Karman Institute for Fluid Dynamics,

Belgium)

Multidisciplinary Design Optimization of an Aero-Engine Fan Blade with Consideration of Bypass and

Core Performance

Christopher Chahine*, Tom Verstraete, Li He

09:40 1106 Andrew Borean Lambe

(University of Toronto, Canada)

Structural and Aerostructural Design of Aircraft Wings with a Matrix-Free Optimizer

Andrew B. Lambe*, Joaquim R. R. A. Martins

10:00 1435 Vladimir Balabanov

(Boeing, Australia)

Common Automotive and Aerospace Requirements for Commercial Structural Optimization Software

Boeing: Vladimir Balabanov*, Rodney Dreisbach, Steve Georgiadis

BMW: Moritz Frenzel, Daniel Heiserer, David Keller, Markus Schemat

10:20 1119

Zhiwei Feng


Technology, China)

Efficient Aerodynamic Optimization Using a Multiobjective Optimization Based Framework to Balance

the Exploration and Exploitation

Zhiwei Feng*, Tao Yang, Jianquan Ge, Qiangang Tang, Yang Ma

Th

urs

day 1

1th

Ju

ne, 2015

42 WCSMO-11

Session 10


11:00 – 12:40

Room: EAA Topology and Shape Optimization 20 (Dynamics II)

Chairs: Yoojeong Noh (Keimyung University, South Korea) and Dong Wang (Northwestern Polytechnical University, China)


11:00 1068 Simo Schmidt


On the integration of tuned multi-mass dampers into a topology optimization method for machine tool

structural dynamics

Christian Brecher, Simo Schmidt*, Marcel Fey

11:20 1237 Yoojeong Noh

(Keimyung University, South Korea)

Comparison Study of Statistical Modelling Methods for Identifying Distribution Types

Youngjin Kang, Yoojeong Noh*, O-Kaung Lim

11:40 1428 Junpeng Zhao


A new method for maximum dynamic response topology optimization in the time domain

Junpeng Zhao*, Chunjie Wang

12:00 1121 Yijie Hu


Mode Identification Applied in Size Optimization with Frequency Constraints

Shenyan Chen, Yijie Hu*

Room: CLT375 Topology and Shape Optimization 21 (Thermofluids III)

Chairs: Anton Evgrafov (Norwegian University of Science and Technology, Norway) and Fabian Wein (University Erlangen-Nuernberg, Germany)


11:00 1430

Anton Evgrafov

(Norwegian University of Science and

Technology, Norway)

State space topology optimization method for non-selfadjoint problems in fluid mechanics

Anton Evgrafov*

11:20 1255

Fabian Wein

(University Erlangen-Nuernberg,

Germany)

Optimal material distribution for an unsaturated flow problem

Marc Avila, Michael Stingl, Fabian Wein*

11:40 1286

Tianjian Li


Technology, China)

Multidisciplinary Design and Analysis of the Direct Drive Aerostatic Slideway

Tianjian Li*, Xiaohong Ding, Kai Cheng

12:00 1107

Danny John Lohan

(University of Illinois at Urbana-

Champaign, United States)

Topology Optimization for Heat Conduction Using Generative Design Algorithms

Danny J. Lohan*, Ercan M. Dede, James T. Allison

12:20 1264

Joe Alexandersen


Denmark)

Topology optimisation of passive coolers for light-emitting diode lamps

Joe Alexandersen*, Ole Sigmund, Niels Aage

Room: CLT173 Topology and Shape Optimization 22 (Isogeometry II)

Chairs: Bo P. Wang (University of Texas at Arlington, United States) and Youn Doh Ha (Kunsan National University, South Korea)


11:00 1117 Youn Doh Ha

(Kunsan National University, South Korea)

Isogeometric shape optimization of general curved geometry: generalized shape sensitivity analysis in

curvilinear coordinates and shell applications

Youn Doh Ha*

11:20 1275 Timothée Leblond

(IRT SYSTEMX, Palaiseau, France)

Gradient-based optimization of parameterized CAD geometries

Timothée Leblond*, Pierre Froment, Paul de Nazelle, Reda Sellakh, Philippe Serré, Gaël Chevallier

11:40 1104

Kristian E. Jensen

(Imperial College London, United

Kingdom)

Optimising Topology Optimisation with Anisotropic Mesh Adaptation

Kristian E. Jensen*

12:00 1162 Guilian Yi


Geometric Feature Identification from Topology Optimization Results

Guilian Yi*, Byeng D. Youn, Nam H. Kim

12:20 1393

Bo P. Wang

(University of Texas at Arlington, United

States)

Adjoint Methods of Sensitivity Analysis for Lyapunov Equation

Boping Wang*, Kun Yan

Th

ursd

ay 1

1th Ju

ne, 2

015

June 7-12, 2015 43

Room: CLT175 Topology and Shape Optimization 23 (Electromagnetics)

Chairs: In Gwun Jang (Korea Advanced Institute of Science and Technology, South Korea) and Scott Townsend (University of Sydney, Australia)


11:00 1251 Toshiki Okamoto


Layout optimization of electromagnetic actuators for deformable mirror devices

Toshiki Okamoto*, Takayuki Yamada, Kazuhiro Izui, Shinji Nishiwaki

11:20 1098 Erin Kuci

(University of Liège, Belgium)

Direct and Adjoint Sensitivity Analysis of Nonlinear Magnetostatic System: Application to Shape

Optimization of Electrical Machines

Erin Kuci*, Christophe Geuzaine, Patrick Dular, Pierre Duysinx

11:40 1307 Suzanne Roberts


Electromagnetic levitation coil design using gradient-based optimization

Suzanne Roberts*, Schalk Kok, Johan Zietsman, Helen Inglis

12:00 1097

In Gwun Jang



Layout optimization of the secondary coils for wireless power transfer systems

Seung Beop Lee, In Gwun Jang*

12:20 1077 Ming Li


Design optimization in stretchable electronics: from straight to curvilinear, from curvilinear to complex

Ming Li*, Zhan Kang, Tengfei Zhao

Room: CLR350 Multidisciplinary Optimization 3 (Biomedical II)

Chairs: Yuhang Chen (Heriot-Watt University, United Kingdom) and Junning Chen (University of Sydney, Australia)


11:00 1138 Che-Cheng Chang


Design and topology optimisation of fractal vasculature

Che-Cheng Chang*, Shiwei Zhou, Qing Li

11:20 1028 Junning Chen


3D Contact Shape Optimization and Additive Fabrication for Removable Partial Dentures

Junning Chen*, Rohana Ahmad, Hanako Suenaga, Wei Li, Michael Swain, Qing Li

11:40 1016 Zhongpu Zhang


XFEM Based Topology Optimization of All-Ceramic Structures for Enhancing Fracture Resistance

Zhongpu Zhang*, Shiwei Zhou, Eric Li, Wei Li, Michael Swain, Qing Li

12:00 1452

Hong Wang

(Dalian Neusoft University of Information,

China)

A Multi-objective Docking Method in Drug Molecular Design

Ling Kang*, Hong Wang, Junfeng Gu, Quan Guo

Room: CLR351 Inverse Problems and Parametric Identification

Chairs: Piotr Breitkopf (Sorbonne universités, Université de technologie de Compiègne, France) and Akira Saito (Toyota Central R&D Labs., Inc., Japan)


11:00 1208 Akira Saito


Elastic Moduli Identification Method for Orthotropic Structures based on Vibration Data

Akira Saito*, Yasunari Nishikawa, Shintaro Yamasaki, Kikuo Fujita, Atsushi Kawamoto, Masakatsu Kuroishi, Hideo

Nakai

11:20 1398

Piotr Breitkopf

(Sorbonne universités, Université de

technologie de Compiègne, France)

Shape manifold learning for optimization and inverse analysis

Piotr Breitkopf*

11:40 1143 Takafumi Nishizu


Damage Detection Method in Non-Destructive Testing Based on Topology Optimization and Eigenvalue

Analysis

Takafumi Nishizu*, Akihiro Takezawa, Mitsuru Kitamura

Th

urs

day 1

1th

Ju

ne, 2015

44 WCSMO-11

Session 11


14:00 – 16:00

Room: EAA Topology and Shape Optimization 24 (Isogeometry I)

Chairs: Liyong Tong (University of Sydney, Australia) and Seonho Cho (Seoul National University, South Korea)


14:00 1406 Liyong Tong


Elimination of void element influence on optimization for nonlinear compliance with a buckling

constraint using moving iso-surface threshold method

Liyong Tong*, Quantian Luo

14:20 1304 Tsuyoshi Nomura


Simultaneous Optimization of Topology and Orientation of Anisotropic Material using Isoparametric

Projection Method

Tsuyoshi Nomura*, Ercan M. Dede, Tadayoshi Matsumori, Atsushi Kawamoto

14:40 1367 Minho Yoon


Isogeometric shape design optimization of elastic structures using boundary integral equation

Minho Yoon*, Seonho Cho

15:00 1253

Sarah Julisson

(Université de Versailles Saint-Quentin-

en-Yvelines, France)

A Novative Optimal Shape Design Based on an Iso-geometric Approach : Application to Optimisation of

Surface Shapes With Discontinuous Curvature

Sarah Julisson*, Christian Fourcade, Paul de Nazelle, Laurent Dumas

15:20 1369 Seung-Wook Lee


Isogeometric Topology Optimization using dual evolution of boundary element method and Level-set

method

Seung-Wook Lee*, Minho Yoon, Seonho Cho

15:40 1366 Myung-Jin Choi


A Mesh Regularization Scheme for Updating Internal Control Points in Isogeometric Shape

Optimization

Myung-Jin Choi*, Seonho Cho

Room: CLT375 Structural Optimization 3 (Plates/Shells)

Chairs: Karoly Jarmai (University of Miskolc, Hungary) and Jaan Lellep (University of Tartu, Estonia)


14:00 1006 Karoly Jarmai

(University of Miskolc, Hungary)

Welded cellular cylindrical shell – a new structural solution for the optimum design of a cantilever

column

Jozsef Farkas, Karoly Jarmai*

14:20 1416 Mahmoud Alfouneh


MIST Topology Optimization for Bending Plates-Statically

Mahmoud Alfouneh*, Liyong Tong

14:40 1009 Sen Lin


Buckling of reversible-spherical shells: the retraction affected by the shape of aperture

Sen Lin*, Shiwei Zhou, Mike Xie

15:00 1400 Jaan Lellep

(University of Tartu, Estonia)

Optimization of elastic plastic plates of piecewise constant thickness

Jaan Lellep*, Julia Polikarpus, Boriss Vlassov

15:20 1100

Janos Logo

(Budapest University of Technology and

Economics, Hungary)

On the optimal design of curved folded plates with multiple loading

Janos Logo*, Bence Balogh

15:40 1348 Hongling Ye

(Beijing University of Technology, China)

Plate/Shell Topological Optimization Subjected to Linear Buckling Constraints by Adopting Composite

Exponential Filtering Function

Hongling Ye*, Ning Chen, Peize Shao, Yunkang Sui

Room: CLT173 Optimization Algorithms 2

Chairs: Hideyuki Azegami (Nagoya University, Japan) and Kazem Ghabraie (University of Southern Queensland, Australia)


14:00 1154

Kazem Ghabraie

(University of Southern Queensland,

Australia)

An improvement technique for Bi-directional Evolutionary Structural optimisation (BESO) method

Kazem Ghabraie*

14:20 1186 Hideyuki Azegami

(Nagoya University, Japan)

Shape derivative formula of domain integral type

Hideyuki Azegami*, Kenzen Takeuchi, Yusuke Naritomi

14:40 1260

Katarzyna Tajs-Zielinska

(Cracow University of Technology,

Poland)

Optimization of structural topology using unstructured Cellular Automata

Bogdan Bochenek, Katarzyna Tajs-Zielinska*

15:00 1185 Daniel Nicolas Wilke


Design optimization of multi-point constraints in structural analysis

Daniel N. Wilke*, Schalk Kok

15:20 1388 Dong-Hoon Choi


An efficient constraint handling method using a polynomial regression model

Gyu-Byung Park, Se Jung Lee, Dong-Hoon Choi*

Th

ursd

ay 1

1th Ju

ne, 2

015

June 7-12, 2015 45

Room: CLT175 Automotive Engineering 4

Chairs: Shujuan Hou (Hunan University, China) and Sierk Fiebig (Volkswagen AG, Braunschweig, Germany)


14:00 1059 Xin Tang


Speed dependent optimisation for variable stiffness vehicle suspension

Xin Tang*, Weihua Li, Haiping Du

14:20 1178 Donghong Ning


Parameter optimisation design for a six-DOF heavy duty vehicle seat suspension

Donghong Ning*, Haiping Du, Weihua Li

14:40 1357 Youngsuk Jung


Structural Optimization for Improving Local Dynamic Stiffness of Automotive Body Structure

Youngsuk Jung*, Seungjae Min, Jungho Kim, Kyungwon Lee, Changkun Lee, Yongsuk Kim

15:00 1234 Guanxin Huang


Reanalysis based Geometrical Optimization and Applications in Structure Designs

Guanxin Huang*, Congyi Zhang, Hu Wang, Guoping Wang, Guangyao Li

15:20 1365 Sunghoon Lim


Integrated Performance Optimization for Wheeled Combat Vehicle by Using Model-Based

Design Approach

Sunghoon Lim*, Woochul Lim, Dong-Min Kim, Seungjae Min, Tae Hee Lee, Jung-Pyo Hong

15:40 1062 Dequan Zhang


Time-dependent system reliability analysis method based on the outcrossing rate

Dequan Zhang*, Xu Han, Jiang Chao, Qing Li

Room: CLR350 Multidisciplinary Optimization 4 (Wind Energy)

Chairs: Achille Messac (Mississippi State University, United States) and Michael Muskulus (Norwegian University of Science and Technology, Norway)


14:00 1330

Achille Messac

(Mississippi State University, United

States)

Surrogate-based Particle Swarm Optimization for Large-scale Wind Farm Layout Design

Ali Mehmani, Weiyang Tong, Souma Chowdhury, Achille Messac*

14:20 1389

Longyan Wang

(Queensland University of Technology,

Australia)

Optimal design of wind farm layout and control strategy

Longyan Wang*, Md Rifat Shahriar, Andy Tan, Yuantong Gu

14:40 1326

Michael Muskulus

(Norwegian University of Science and

Technology, Norway)

Topology optimization of a jacket structure for an offshore wind turbine with a genetic algorithm

Johan Henrik Martens, Daniel Zwick, Michael Muskulus*

15:00 1347

Souma Chowdhury

(Mississippi State University, United

States)

A Visually-Informed Decision-Making Platform for Wind Farm Layout Optimization

Souma Chowdhury*, Weiyang Tong, Ali Mehmani, Achille Messac

15:20 1287

Michael Kirschneck


Netherlands)

Structural Dynamic Topology Optimization of a Direct-Drive Single Bearing Wind Turbine Generator

Michael Kirschneck*, H. Polinder, R. A. J. van Ostayen, F. C. M. van Kempen, D. J. Rixen

15:40 1390

Robert Thomas Rudolf

(Flensburg University of Applied Sciences,

Germany)

Reduced Order Simulation Surrogate for Wind Turbine Component Design

Robert Thomas Rudolf*

Th

urs

day 1

1th

Ju

ne, 2015

46 WCSMO-11

State-of-the-Art Discussion


16:20 – 18:00


Please join us for the State-of-the-Art (SOTA) Discussion, to be held at

Eastern Avenue Auditorium. Four panelists will present and discuss the

emerging trends in various technology areas relevant to the

WCSMO-11.

Chair

Professor Kyung K. Choi

University of Iowa, United States

Panelists

Professor Qing Li

University of Sydney, Australia

Topic: Topology optimization: achievements and new frontiers

Professor Nozomu Kogiso

Osaka Prefecture University, Japan

Topic: Design under uncertainty: from variability to model -form uncertainty and

design validation

Professor Ramana V. Grandhi

Wright State University, United States

Topic: Surrogates and meta-models: for high-dimensionality, multi-fidelity and

adaptivity

Professor Erik Lund

Aalborg University, Denmark

Topic: Design applications: success stories and emerging opportunities

Th

ursd

ay 1

1th Ju

ne, 2

015

June 7-12, 2015 47

Congress Dinner


18:30 – 21:30

The Great Hall

Please join us for the Congress Dinner, to be held at the Great Hall

Th

urs

day 1

1th

Ju

ne, 2015

48 WCSMO-11

Scientific and Social Excursion

Friday 12 th June, 2015

The Sydney Opera House

Following the tradition of the WCSMO, we have organized a scientific

and a social visit on the last day of the congress to the Sydney Opera

House. The iconic landmark is hailed as

“one of the indisputable masterpieces of human creativity, not only in

the 20th century but in the history of humankind”

– 2007 World Heritage

Day Visit (8:45 – 11:00)

Sydney Opera House Tour

From architectural design to structural engineering

Tours are for 1 hour.

Starting time for your tour is shown on your ticket.

Evening Visit (20:00 – 22:30)

Sydney Symphony Orchestra performance

Summer Nights

Haydn – Symphony No.31 (Horn Signal)

Berlioz – Les Nuits d'été (Summer Nights)

Schubert – Symphony No.4 (Tragic)

Conductor: David Robertson

Mezzo-soprano: Katarina Karnéus

June 7-12, 2015 49

Notes

50 WCSMO-11

sponsors - web.aeromech.usyd.edu.auweb.aeromech.usyd.edu.au/wcsmo2015/documents/... · sponsors ....

Documents