spray flame spectroscopy

15
STEM Collegian Center Project Presented by Njimikara Abianui and Leke Abondem Atabong 7 December 2007 Supervised by Prof. William A. Boyle

Upload: erol

Post on 07-Jan-2016

45 views

Category:

Documents


0 download

DESCRIPTION

STEM Collegian Center Project Presented by Njimikara Abianui and Leke Abondem Atabong 7 December 2007 Supervised by Prof. William A. Boyle. SPRAY FLAME SPECTROSCOPY. It is one of the earliest analytical techniques in chemistry. - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: SPRAY FLAME SPECTROSCOPY

STEM Collegian Center Project Presented by

Njimikara Abianui and

Leke Abondem Atabong

7 December 2007

Supervised byProf. William A. Boyle

Page 2: SPRAY FLAME SPECTROSCOPY

It is one of the earliest analytical techniques in chemistry.

It identifies elements by the colors they produce in flames.

There are many ways of performing this test; each of which has its pros and cons.

Wooden splint, cotton swab, loop, spray bottle methods.

This project considered two of these methods: the loop and the spray bottle methods.

Page 3: SPRAY FLAME SPECTROSCOPY

Involves the use of a wire inoculation loop (platinum wire is desirable), a Bunsen burner and solutions of salts containing the elements.

The wire inoculation loop is cleaned between tests by keeping it in the flame until all the color due to the element is gone.

Inadequate cleaning of the loop can make color identification difficult.

Page 4: SPRAY FLAME SPECTROSCOPY

Introduces a mist of the element solutions directly into the flame.

Time saving. No problems of

color contamination from previous tests.

Page 5: SPRAY FLAME SPECTROSCOPY

5% solutions of Li2CO3, NaCl, CuSO4, KCl Sr(NO3)2

60 mL spray bottles. Bunsen burner

Page 6: SPRAY FLAME SPECTROSCOPY

LOOP METHOD SPRAY BOTTLE METHOD

High cost of platinum wires.

Difficult to eliminate element contamination from nichrome-steel wire (a less expensive substitute for platinum).

Flame color contamination.

Time consuming.

Affordable spray bottles.

Easy to clean and maintain.

Uses comparable amounts of solutions as the loop method.

No flame color contamination.

Faster to use.

Page 7: SPRAY FLAME SPECTROSCOPY
Page 8: SPRAY FLAME SPECTROSCOPY
Page 9: SPRAY FLAME SPECTROSCOPY
Page 10: SPRAY FLAME SPECTROSCOPY
Page 11: SPRAY FLAME SPECTROSCOPY
Page 12: SPRAY FLAME SPECTROSCOPY
Page 13: SPRAY FLAME SPECTROSCOPY

The loop method was time-consuming and prone to errors in the colors produced.

The spray bottle method is faster and produces the clean colors of each element.

Page 14: SPRAY FLAME SPECTROSCOPY

ACKNOWLEDGEMENTS

The plastic spray bottles used in this experiment were kindly provided to PGCC courtesy of

B.F. Ascher & Co., Inc., Lenexa, KS, USA.http://www.bfascher.com/

Page 15: SPRAY FLAME SPECTROSCOPY

Dogancay, Deborah. "Flame Tests Performed Safely: A Safe and Effective Alternative to the Traditional Flame Test." The Science Teacher 72.6 (2005): 34-38. Science Resource Center. Thomso Gale. Prince George's Community College Library. 6 Dec. 2007 <http://galenet.galegroup.com>.

Johnson, Kristin, and Rodney Schreiner. "A Dramatic Flame Test Demonstration." Journal of Chemical Education 78.5 (2001): 640-41. 6 Dec. 2007 <http://www.eric.ed.gov>.