srk-atex - advancedtech.co.kr 2014-1/srk-atex_en_1113.pdf · filtration according to nas 1638 class...

4
Hydraulic fluid Mineral oil according to DIN 51524 (other fluids on request) Fluid temperature range -20 bis 80 °C Ambient temperature range -20 bis 40 °C (up to -40 °C on request) Viscosity range 5 to 220 mm 2 /s (optimal: 15-35) Max. operating pressure 700 bar continuous pressure (S1) Operation pressure at suction port -0,2 bar to 0,5 bar gauge pressure Filtration According to NAS 1638 class 6 resp. ISO/DIN 4406 17/15/12 Weight See product information Installation position Any Radial force/Axial force onto driving shaft Not allowed Max. speed range 1800 min -1 Direction of rotation Any Suction height Max. 500 mm Material Pressure flange: steel Driving shaft: steel Cover:cast aluminium Technical data • Specially designed for demanding applications with continuous pressures (S1) up to 700 bar long economic lifetime! • Explosion-prone hydraulic constructions (according ATEX standard) Applications • Radial piston pump of modular design • With valve controlled pump elements • can be supplied with 3, 5 or 7 pistons per section (depending on size) • Design as multiple circuit pump on re- quest • Low-friction pumping elements with low sliding speed Design • High volumetric efficiency • Self-priming and venting • Low pulsation • Low noise level Features Type SRK-ATEX 700 bar 0,24 up to 8,14 cm 3 /rev Special Radial piston pumps

Upload: hadat

Post on 11-Feb-2019

216 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: SRK-ATEX - advancedtech.co.kr 2014-1/SRK-ATEX_EN_1113.pdf · Filtration According to NAS 1638 class 6 resp. ISO/DIN 4406 17/15/12 ... Type SRK-ATEX 700 bar 0,24 up to 8 ... 702 4,58

Hydraulic fluid Mineral oil according to DIN 51524(other fluids on request)

Fluid temperature range -20 bis 80 °CAmbient temperature range -20 bis 40 °C (up to -40 °C on request)Viscosity range 5 to 220 mm2/s (optimal: 15-35)Max. operating pressure 700 bar continuous pressure (S1)Operation pressure at suction port -0,2 bar to 0,5 bar gauge pressureFiltration According to NAS 1638 class 6 resp. ISO/DIN 4406 17/15/12Weight See product informationInstallation position AnyRadial force/Axial force onto driving shaft Not allowedMax. speed range 1800 min-1

Direction of rotation AnySuction height Max. 500 mmMaterial Pressure flange: steel

Driving shaft: steelCover:cast aluminium

Technical data

• Specially designed for demanding applications with continuous pressures (S1) up to 700 bar → long economic lifetime!

• Explosion-prone hydraulic constructions (according ATEX standard)

Applications• Radial piston pump of modular design• With valve controlled pump elements• can be supplied with 3, 5 or 7 pistons per

section (depending on size)• Design as multiple circuit pump on re-

quest• Low-friction pumping elements with low

sliding speed

Design

• High volumetric efficiency• Self-priming and venting• Low pulsation• Low noise level

Features

Type SRK-ATEX700 bar0,24 up to 8,14 cm3/rev

Special Radial piston pumps

Page 2: SRK-ATEX - advancedtech.co.kr 2014-1/SRK-ATEX_EN_1113.pdf · Filtration According to NAS 1638 class 6 resp. ISO/DIN 4406 17/15/12 ... Type SRK-ATEX 700 bar 0,24 up to 8 ... 702 4,58

2/4

SRK701-ATEX-0,24-700-V-C*00

Ordering code

Mounting

700 bar0,24 up to 8,14 cm3/rev

Type SRK-ATEX

- -- - -V 00

Design revisionsee dimension drawings(capital letters A-Z; identical letters equal same connect-ing dimensions)

Special design01 ... 99(00 for standard)

Seal material V [FPM] other seal materials on request

Max. operating pressure [bar] see product information

Displacement [cm3/rev] see product information

Version ATEX

Size 701 702

Special Radial piston pump

7000,47ATEX701SRKExample

Manufacturer’s logoCE-identifi cation

Symbol for explosion protectionDevice class II (other explosion hazardous areas)

Device category for device group II: high degree of safety

Type of the explosion hazardous athmosphere for class II:gases, vapors, mists

Ignition protecion type:constructional safety

Temperature class (max. 135°C)

Page 3: SRK-ATEX - advancedtech.co.kr 2014-1/SRK-ATEX_EN_1113.pdf · Filtration According to NAS 1638 class 6 resp. ISO/DIN 4406 17/15/12 ... Type SRK-ATEX 700 bar 0,24 up to 8 ... 702 4,58

3/4

Calculation of driving motor power

Product information

p · Vg · n · kP = ηt · 600 · 103

P = Driving power [kW] p = Operating pressure [bar]Vg = Displacement [cm3/rev]n = Speed [rpm] ηt = Overall efficiency approx. 0,8

k = Pulsation factor - with 3 pumping elements: k approx. 1,05 - with 5 pumping elements: k approx. 1,0 - with 7 pumping elements: k approx. 1,0 - with 9 pumping elements: k approx. 1,0

700 bar0,24 up to 8,14 cm3/rev

Type SRK-ATEX

Baureihe Fördervolumen[cm3/U]

Betriebsdruckmax. [bar]

Anzahl Pumpenele-

mente

Pumpenele-mente Ø

[mm]

Gewichtca. [kg]

Art.-Nr. [Bieri/SAP]

701 0,24 700 3 5 6,1 75661/3888830701 0,34 700 3 6 6,1 75662/3888831701 0,47 700 3 5 6,2 75646/3867847701 0,60 700 3 8 6,1 75663/3888832701 0,68 700 3 6 6,2 75647/3888832701 0,79 700 5 5 6,6 75650/3888834701 1,10 700 7 5 6,9 75652/3888865701 1,21 700 3 8 6,2 75648/3888867701 1,53 700 3 9 7,2 75649/3888868701 2,01 700 5 8 6,9 75651/3888758701 2,81 700 7 8 7,2 75653/3873960701 3,14 700 5 10 6,9 75785/3888485*701 3,56 700 7 9 7,2 75654/3888486701 4,40 700 7 10 7,2 75655/3888869*701 6,33 700 7 12 7,2 75611/3888871*702 2,81 700 7 8 14,9 75656/3888872702 3,56 700 7 9 14,9 75657/3888874702 4,40 700 7 10 15,4 75658/3888885*702 4,58 700 9 9 15,7 75659/3888886702 5,65 700 9 10 15,7 75660/3888887*702 6,33 700 7 12 15,4 75612/3888888*702 8,14 700 9 12 15,7 75613/3888889*

*Please contact us if a mineral oil with a viscosity less than 15 mm2/s is required!

Page 4: SRK-ATEX - advancedtech.co.kr 2014-1/SRK-ATEX_EN_1113.pdf · Filtration According to NAS 1638 class 6 resp. ISO/DIN 4406 17/15/12 ... Type SRK-ATEX 700 bar 0,24 up to 8 ... 702 4,58

Bieri Hydraulik AGKönizstrasse 274 CH-3097 Liebefeld Tel. +41 31 970 09 09 | Fax +41 31 970 09 [email protected] | www.bierihydraulics.com4/4 SRK-ATEX_1113

The information in this brochure relates to the operating condi-tions and applications described.For applications and operating conditions not described, ple-ase contact the relevant technical department.Subject to technical modifications.

Dimensional drawings

Size SRK701-ATEX / Design revision C

700 bar0,24 up to 8,14 cm3/rev

Type SRK-ATEX

Size SRK702-ATEX / Design revision C