4.2

www.ssg.eu

SSGboltleSSShelvingsystemwithoutbolts–representingthebestoftoday’stechnology.Withsimpleremodelingpossibilities,SSGboltlessSystemgivesyouflexibilityandsmartdetails.

2 www.ssg.eu

Choose our shelving solutions

SSG Boltless Shelving System meets all requirements regarding functionality, design and flexibility. A wide range of models gives everyone the opportunity to find their own SSG Boltless Shelving solution.

3www.ssg.eu

SSG Boltless System 6Pre-packed shelving system 12Storage for auto parts 14Shelves 16SSG T-profiles frame 17Accessories 18

tableofContents

4 www.ssg.eu

boltlesskreuzstrebeTekst på denne linjen?

SBS 150

SBS 250

5www.ssg.eu

Realall-roundersSbS150• 150 kg shelf load capacity: e.g. for tools, paint or metal goods.

• Unique edge height for this shelf load of only 25 mm.

• Shelf load can be increased to 200 kg using optional reinforcement beam.

Forheavygoods

SbS250• 250 kg shelf load capacity for large containers, rolls of laminate, bundled cables, etc.

• Shelf load can be increased to 300 kg using optional reinforcement beam.

SSGboltlesssystem• Quick and easy assembly, allowing flexible reconfiguration.

• Access from one or both sides.

• Also suitable for constructing multi-storey shelving systems and double shelving.

• Very flexible, with easy replacement of accessories and component parts.

• Max load capacity 150, 250 og 330 kg.

Quick and eaSy aSSemBly

6 www.ssg.eu

SSGboltlessSystemforwarehouses,workshops,commercialpremisesFor single sided access with cross bracing

• Vertical adjustment of individual shelves at 25 mm intervals.

• Ideal for constructing shelving against a wall. Back-to-back

assembly as double shelving also possible.

• Three shelving widths allow customised fitting to match the

space available and type of goods stored.

• Suitable for multi-level shelving systems.

• Quick assembly to easy plug-in insertion of the shelves.

• Simple adjustment of the shelf with turnbuckles at the cross braces.

• Economic bracing version.

• Increase of bay load capacity with additional side elements.

SafetyShelving units with a height-to-depth ratio greater than 5:1 must be secured against tipping over.

example: A shelving unit with a depth of 300 mm and a height of 2000 mm must be secured to a wall or the floor, or by bracing at the top (see fixing accessories on Page 21).

The load bearing capacities indicated apply for evenly distributed loads per shelf.

dimenSionS aSSemBledStarter bay: Nominal length + 60 mmextension bay: Nominal length + 6 mm frame depth overall: Nominal depth + 36 mm

Depth: 300 mm 400 mm 500 mm 600 mm

Height: 2000 mm 2500 mm 3000 mm

Width: 1000 / 1300 mm

numBer of croSS BracingS2000mm = 1 cross bracing2500mm = 1 cross bracing3000mm = 2 cross bracing

7www.ssg.eu

Bracing uSing croSS-BraceS Cross-braces give the plug-in shelving stability. They are attached to the rear of the shelving and tensioned.

BenefitS

• Shelving unit easily aligned using turnbuckles on the cross-braces.

• Economic bracing version.

depth mm 300 400 500 600

height mm

Bay load capacity

Shelves

Starter bay extension bay

Starter bay extension bay

Starter bay extension bay

Starter bay extension bay

Shelf width 1.000 mm · load capacity 150 kg

2000 1,3 t 5 310097 310232 310100 310235 310103 310238 310106 310241

2500 1,8 t 6 310142 310277 310145 310280 310148 310283 310151 310286

3000 1,6 t 7 310187 310322 310190 310325 310193 310327 310196 310331

additional shelf with 4 shelf brackets 310360 310360 310362 310362 310364 310364 310366 310366

Shelf width 1.000 mm · load capacity 250 kg

2000 1,3 t 5 310394 310517 12940 12945 12950 12955 12960 12965

2500 1,8 t 6 310435 310559 310438 310562 310441 3310565 310444 310568

3000 1,6 t 7 310476 310601 310472 310604 310482 310607 310485 310610

additional shelf with 4 shelf brackets 310637 310637 310639 310639 310641 310641 310643 310643

Shelf width 1.300 mm · load capacity 150 kg

2000 1,3 t 5 310112 310247 310115 310250 310118 310253 310121 310256

2500 1,8 t 6 310157 310292 310160 310295 310163 310298 310166 310301

3000 1,6 t 7 310202 310337 310205 310340 310208 310343 310211 310346

additional shelf with 4 shelf brackets 310370 310370 310372 310372 310374 310374 310376 310376

Shelf width 1.300 mm · load capacity 250 kg

2000 1,3 t 5 310409 310532 310412 310535 310414 310538 310417 310541

2500 1,8 t 6 310450 310574 310453 310577 310455 310580 310458 310583

3000 1,6 t 7 310491 310616 310494 310619 310496 310622 310499 310625

additional shelf with 4 shelf brackets 310647 310647 310649 310649 310651 310651 310653 310653

8 www.ssg.eu

• Vertical adjustment of individual shelves at 25 mm intervals.

• Stored goods can be placed and reached from both sides.

• Two shelving widths allow customised fitting to match the space

available and type of goods stored.

• Suitable for assembling multi-storey shelving systems.

• Quick assembly thanks to easy plug-in insertion of the shelves.

• Shorter picking sequences thanks to access from both sides.

• Bay load can be increased using additional short crossbars.

SafetyShelving units with a height-to-depth ratio greater than 5:1 must be secured against tilting.

example: A shelving unit with a depth of 300 mm and a height of 2000 mm must be secured to a wall or the floor, or by bracing at the top (see fixing accessories on Page 21).

The load bearing capacities indicated apply for evenly distributed loads per shelf.

dimenSionS aSSemBledStarter bay: Nominal length + 60 mmextension bay: Nominal length + 6 mm frame depth overall: Nominal depth + 36 mm

Bracing levelS with long croSSBarSUp to 2000 mm = 2 pairs of long crossbarsUp to 2500 mm = 3 pairs of long crossbarsUp to 3000 mm = 3 pairs of long crossbars

Depth: 300 mm 400 mm 500 mm 600 mm

Height: 2000 mm 2500 mm 3000 mm

Width: 1000 / 1300 mm

SSGboltlessSystemforwarehouses,workshops,commercialpremisesFor double-sided access with long cross bars

9www.ssg.eu

additional Bracing with long croSSBarS T-profile frame to ensure excellent stability.

BenefitS

• Bracing version for placement of goods from both sides.

• In both single and double shelving units, the stored

goods can be simply pushed through.

depth mm 300 400 500 600

height mm

Bay load capacity

Shelves

Starter bay extension bay

Starter bay extension bay

Starter bay extension bay

Starter bay extension bay

Shelf width 1.000 mm · load capacity 150 kg

2000 1,3 t 5 310846 310981 310849 310984 310852 310987 310855 310990

2500 1,8 t 6 310891 311026 310894 311029 310897 311032 310900 311035

3000 1,6 t 7 310936 311071 310939 311074 310942 311077 310945 311080

additional shelf with 4 shelf brackets 310360 310360 310362 310362 310364 310364 310366 310366

Shelf width 1.000 mm · load capacity 250 kg

2000 1,3 t 5 311113 311239 311116 311242 311119 311245 311222 311248

2500 1,8 t 6 311155 311281 311158 311284 311161 311287 311164 311290

3000 1,6 t 7 311197 311323 311200 311326 311203 311329 311206 311332

additional shelf with 4 shelf brackets 310637 310637 310639 310639 310641 310641 310643 310643

Shelf width 1.300 mm · load capacity 150 kg

2000 1,3 t 5 310861 310996 310864 310999 310867 311002 310870 311005

2500 1,8 t 6 310906 311041 310909 311044 310912 311047 310915 311050

3000 1,6 t 7 310951 311086 310958 311089 310957 311092 310960 311059

additional shelf with 4 shelf brackets 310370 310370 310372 310372 310374 310374 310376 310376

Shelf width 1.300 mm · load capacity 250 kg

2000 1,3 t 5 311128 311254 1311131 311257 311134 311260 311137 311263

2500 1,8 t 6 311170 311296 311173 311299 311176 311302 311179 311305

3000 1,6 t 7 311212 311338 311215 311341 311218 311344 311221 311347

additional shelf with 4 shelf brackets 310647 310647 310649 310649 310651 310651 310653 310653

10 www.ssg.eu

11www.ssg.eu

douBle BoltleSS Shelving with croSS Bracing

12 www.ssg.eu

Pre-packedshelvingsystemSimple assembly without tools

SSg Boltless Shelving system - shop-in-shop version.

• Pre assembled T-Profile frames.

• Incl. 4 pcs shelves.

• Available in depth 400, 500 and 600 mm.

• Shelves height adjustable with 25 mm.

• Individual assembly with accessories page 18.

• Pre-packed in plastic.

• With crossbracing.

• Galvanized.

• Quick assembly with easy insertion of the shelves.

• Assembly with tools.

depth mm 400

height mm

Bay load

capacity

Shelves

Starter bay

extension bay

2000 1,3 t 4 311515 311518

2 pcs additional shelves with brackets

311512 311512

13www.ssg.eu

Shop SolutionS

14 www.ssg.eu

wheel/tyre Shelving

width mm 900 1150

heigth mm

depth mm

number of levels

Starter bay

extension bay

Starter bay

extension bay

2000400

3 311574 311578 311575 311579

2500 4 311576 311580 311577 311581

wheel/tyre Shelving

Spacer Bracketfor double shelving units

• For tyre and rim units.

• To maintain the necessary distance

between two shelving units.

• Can be adjusted at 25 mm intervals.

• Can be inserted into the T-profile frames.

• Galvanized.

wall Bracketfor single shelving

• For tyre and rim units.

• For fixing the shelf units to the wall.

• Vertical adjustment at 25 mm intervals.

• Galvanized.

Supplied without wall plug accessories.

features

• Tyres can be placed and picked

from both sides.

• Vertical adjustment of individual

storage levels at 25 mm intervals.

• Load up to 150 kg per level.

• Bracing with tyre beams.

• Galvanized.

Benefits

• Safe storage of the tyres thanks

to special tyre beams.

• Quick assembly thanks to

easy plug-in insertion of the

storage levels.

• Four different shelving widths

allow customised fitting to

different tyre sizes and the

storage areas available.

• Can be adjusted for use with

tyres of 550–650 mm Ø.

StorageforautopartsOptimum storage with easy access

Length = distance between t-profiles

art. nr. l mm311587 175 – 325

art. nr. l mm311588 175 – 325311589 265 – 465

15www.ssg.eu

kitS for auto partS Storagefor standing parts

• 2 pcs. angle brackets including 4 pcs. shelf supports.

• 1 pcs. universal profile with non-slip finish.

tuBe divider

• Lined to prevent storage damage.

• Complete with end cap.

kitS for auto partS Storagefor suspended parts up to 50 kg

• 2 pcs. angle brackets including 4 pcs. shelf supports.

• 1 pcs. tubular hanger bar including fixing for suspending mats, etc.

kitS for auto partS Storagee.g. for metal parts

• 2 pcs. angle brackets including 4 pcs. shelf supports.

• 2 pcs. universal profiles with non-slip finish.

• To accommodate up to 9 pcs. tube dividers.

tuBe divider

• Lined to prevent storage damage.

• Complete with end cap.

width 1000 mm

depth mm 400 500 600 800 1000

311610 311611 311612 311613 311614

length mm 300 400 500

311615 311616 311617

width 1000 mm

depth mm 400 500 600 800 1000

311600 311601 311602 311603 311604

width 1300 mm

depth mm 400 500 600 800 1000

311605 311606 311607 311608 311609

width 1000 mm

depth mm 400 500 600 800 1000

311590 311591 311592 311593 311594

length mm 300 400 500

311615 311616 311617

16 www.ssg.eu

optimised box design increases the load capacity per shelf up to 25%.

additional bracing provided by doubling the material thickness on the supporting edges.

easily inserted into the shelf brackets.

maximum stability by running the box profile right into the corners.

high degree of stability thanks to triple edge chamfering along the depth of the shelf.

protection during transit thanks to stacking lugs.

eco friendly connection technique

accessories such as metal dividers or dividers thanks to hole-system.

ratchet holes for easy assembly in screw-in system.

25 /

40 m

m

edge heightS:

SBS 150 25 mm with shelf load of 150 kg.

SBS 250 og SBS 330 40 mm with shelf load of 250 kg and 330 kg.

Width: 750 / 1000 / 1300 mm

Depth: 300 / 400 / 500 / 600

ShelvesExcellent quality and load capacity

• Shelf with 25 mm edge height, 150 kg shelf load.

• With box profile for optimum distribution of load

bearing capacity.

• Shelf with 40 mm edge height, 250 kg shelf load.

• With box profile for optimum distribution of load

bearing capacity

SBS 150

width mm 1000 1300

depth mm

300 311649 311659

400 311651 311661

500 311653 311663

600 311655 311665

SBS 250

width mm 1000 1300

depth mm

300 311677 311689

400 311679 311691

500 311689 311693

600 311683 311695

17www.ssg.eu

t-profileplug-in

• For constructing SSG T-profile frames.

• Galvanized, RAL 7035 Light Grey and RAL 5010 Gentian Blue.

• New optimised T-profile.

• High load bearing capacity.

• Maximum stability.

• Hole-system with lengths marked off for easy connection of system components.

• Meets the strictest manufacturing tolerance requirements.

• Galvanized (RAL 7035 Light Grey and RAL 5010 Blue on request).

Short croSSBarplug-in

• For constructing SSG T-profile frames.

• Simply insert in the T-profiles.

• Galvanized, RAL 7035 Light Grey and RAL 5010 Gentian Blue.

high Quality and preciSion in plug-in SyStem

Shelving iS Quickly aSSemBled in juSt a few StepS

heigth mm 2000 2500 3000

311712 311718 311721

depth mm 300 400 500 600

311732 311738 311738 311744

SSGt-profilesframe

Up to H:2000 mm = 2 short crossbarsUp to H:2500 mm = 3 short crossbarsUp to H:3000 mm = 3 short crossbars

18 www.ssg.eu

plaStic malletfor fixing shelving parts

• 40 mm head.

End cap

T-profile

Shelf Long crossbar

Short crossbar

Cross-brace

Clip-on shoe

Shelf support

plug-in SyStem Bracing

To brace the plug-in system you will need either a cross-brace OR a long crossbar.

overview of BaSic level eQuipment

end capfor SSg t-profiles

• Nice visual finish.

• Made from plastic,

RAL 7035 Light Grey.

Single clip-on Shoefor SSg t-profiles

• For secure assembly

of plug-in shelving.

• Galvanized.

On floors containing magnesite, the clip-on shoes must have pro-tective separating foil inserted between them and the floor.

On floors containing magnesite, the clip-on shoes must have pro-tective separating foil inserted between them and the floor.

douBle clip-on Shoefor SSg t-profiles

• For secure assembly of the centre

T-profiles with double shelving.

• Galvanized.

end cap 311761

clip-on shoe 311753

Shims 311758

clip-on shoe 311754

Shims 311759

mallet 311899

Accessories

19www.ssg.eu

long croSSBarfor plug-in system shelving

• For plug-in system shelving to be accessed from both sides.

• For bracing without cross-braces.

• Galvanized or RAL 7035 Light Grey.

Quantity:Up to 2000 mm = 2 pairsUp to 2500 mm = 3 pairsUp to 3000 mm = 3 pairs

Shelf SupportSBS 150 and SBS 250• For suspending the shelves in

plug-in system frames.

• 4 pcs. items needed per shelf.

• Specially reinforced

shelf supports for

SBS 330 shelves.

• Galvanized.

univerSal Supportfor wooden shelves and mesh panels

• For inserting wooden shelves

etc. in plug-in system frames.

• 4 pcs. items needed per shelf.

• Load bearing capacity of up to

200 kg per level.

• Galvanized.

Every second bay must be stabilized with cross bracing.

Up to 2500 mm = 1 pcs cross brace

Up to 3000 mm = 2 pcs cross brace

croSS-Bracefor plug-in system basic shelving

• Comprising:

2 pcs. diagonal braces,

2 pcs. turnbuckles.

• For bracing plug-in system

basic shelving to be accessed

from one side.

• Made from tubular steel.

• Galvanized.

diagonal Bracefor plug-in system extension shelving

• Comprising:

1 pcs. diagonal brace,

1 pcs. turnbuckle.

• For bracing plug-in system

extension shelving to be

accessed from one side.

• Made from tubular steel.

• Galvanized.

SBS150 SBS250

311894

SBS330 311895

for wooden shelves and mesh panels

311896

width mm

750 / 1000 311762

1300 311763

width mm

750 / 1000 311764

1300 311765

150 Shelf

length mm 1000 1300

galvanized 311876 311880

light grey 311877 311881

250 and 330 Shelf

length mm 1000 1300

galvanized 311878 311882

light grey 311879 311883

20 www.ssg.eu

attachment Bracket for corner SolutionS for plug-in system shelving with long crossbars

• Each corner level requires 2 pcs. long crossbars and

2 pcs. attachment brackets.

• Can be used on shelves with 25 mm edge height.

• Load bearing capacity of the attachment bracket: 100 kg.

• Galvanized.

reinforcement BeamSfor shelves

• For increasing load bearing capacity by 50 kg per shelf.

• Prevents shelves bending.

• Fitted lengthways, from a depth dimension of 400 mm on.

• Can be simply pushed into fully assembled shelving, if it is free of goods.

• Galvanized.

cover Strip for double shelving units

• Bridges the gap between the shelves on double shelving.

tyre croSS memBerSfor safe storage of wheels, tyres and rims

• Complete with 2 pcs. plastic plugs.

• Galvanized.

filling Bar for long croSS Bar

filling Bar for Shelf with hookS

2 safety pins on each beam

150 Shelf

length mm heigth mm

100025

311890

1300 311892

250 and 330 Shelf

length mm heigth mm

100040

311891

1300 311893

Shelf bracket for corner bay - SBS 150 311868

Shelf bracket for corner bay - SBS 250 311869

for long croSS Bar

length mm

1000 311785

1300 311789

for Shelf with hookS

length mm

1000 311783

1300 311787

length mm heigth mm

100050

311771

1300 311773

Safety pin 311943

21www.ssg.eu

douBle Shelving connectorfor t-profiles

• For safe and stable screw-joint

connection of the T-profiles on

double shelving.

• For use from heights of 3000 mm up.

• Complete with 2 pcs. hex screws.

profile clipfor double shelving units

• For clipping together T-profiles

on double shelving.

connection piece for 2 t-profileSone-part

• For stacking shelving units on top

of one another.

• For safe and stable screw-joint

connection of the T-profiles.

• Complete with 4 pcs.

self-tapping screws.

• Attached to hole-system

of the T-profiles.

connection piece for 4 t-profileStwo-part

• For stacking double

shelving systems.

• For safe and stable screw-joint

connection of the centre T-profiles.

• Complete with 8 hex screws.

• 2 pcs. connectors enclose

4 pcs. abutting T-profiles.

floor anchorfBn 2 10/10

• For fixing plug-in system

shelving to the floor.

• Suitable for plug-in system

clip-on shoes.

wall fixingstable design

• Needed to prevent shelving units from

tilting, where their height-to-depth

ratio is 5:1 or more.

• Supplied without screws or wall plugs.

• Galvanized.

Self-tapping Screw 4,8 x 13 mm

• For secure connection of

clip-on shoes on plug-in

system T-profiles.

wall fixinglightweight design

• Needed to prevent shelving units from

tilting, where their height-to-depth ratio is

5:1 or more.

• Supplied without screws or wall plugs.

• Galvanized.

connection platefor cross-brace

• For installing the cross-braces

on double shelving.height 55 mm

galvanized 311897

profile clip 311900

connection plate 311766

height 200 mm Single Sided

galvanized 311946

height 200 mm douBle Sided

galvanized 311944

wall fixing 311948

floor anchor 311760 wall fixing 311949

Screw 311755

22 www.ssg.eu

Solid metal Side panelSfor basic and extension shelving

• Flexible solution thanks to 2 heights that can be combined.

• Complete with M6x8 screws/nuts for fixing.

• Galvanized and RAL 7035 Light Grey.

Solid metal rear panelSfor basic and extension shelving

• Flexible solution thanks to 3 pcs. heights that

can be combined.

• Bracing of the rear panel via stiffener.

• Complete with rear panel brackets for fixing.

• Galvanized and RAL 7035 Light Grey.

Solid metal Side facingSfor outer frames

• Flush finish with T-profile frame.

• Attractive solid metal facing for outer frames.

• Flexible solution thanks to 3 pcs. heights that can be combined.

• Where solid metal side facings are used, the T-profile frames

must be fitted with small crossbars.

• Complete with M6x8 screws/nuts for fixing.

• RAL 7035 Light Grey and RAL 5010 Gentian Blue.

Flush finish with T-profile frame

Back wall clips

height mmdepth mm

300 400 500 600

1050 311919 311921 311923 311925

1300 311931 311933 311935 311937

height mmwidth mm

750 1000 1300

500 311901 311902 311903

1000 311907 311908 311909

height mmdepth mm

300 400 500 600

1000 311792 311794 311796 311798

1250 311802 311804 311806 311808

1300 311812 311814 311816 311818

23www.ssg.eu

meSh Side panelSfor basic and extension shelving

• 50 x 50 x 3 mm mesh.

• Complete with fixing hooks.

• Gloss galvanized.

meSh rear panelSfor basic and extension shelving

• 50 x 50 x 3 mm mesh.

• Complete with fixing hooks.

• Gloss galvanized.

doorS

Ideal for constructing lockable shelving systems in conjunction with side and rear panels. Can be combined with accessories from the plug-in system range, e.g. plug-in metal dividers and book ends.

The locks are available in two different locking versions:

identical locks:All doors can be locked using a single key.

different locks: Each door is locked using a separate key.

The door measuring 1000 mm in height can be combined with drawer module 36208-N.

• Easily assembled.

• Complete with knob with three-point locking.

• Complete with front facings.

• RAL 7035 Light Grey.

width mm heigth 300 mm heigth 500 mm heigth 1000 mm heigth 1950 mm

750 311851 311854 311847 311860

1000 311852 311855 131858 311861

1300 311853 311856 311859 311862

depth mm heigth 1950 mm

300 311863

400 311864

500 311865

600 311866

800 311867

pair of doorS 2000 mm

colour heigth mm width mm identical

locksdifferent

locks

ral 7035 light grey 2000 1000 311777 311778

pair of doorS 1000 mm

colour heigth mm width mm identical

locksdifferent

locksral 7035 light grey 1000 1000 311775 311776

24 www.ssg.eu

plinth facingS

• Complete with 2 pcs. plastic plugs for fixing.

• Galvanized.

front plate

• Prevents stored goods from sliding through.

• Complete with 2 pcs. plastic plugs for fixing.

• Galvanized.

rear panel

• For inserting into the shelf supports.

• Prevents stored goods from sliding through.

• Galvanized.

width mm heigth mm

100090

311976

1300 311977

150 kg / 25 mm edge

width mm heigth mm

100090

311954

1300 311958

250-330 kg / 40 mm edge

width mm heigth mm

100090

311956

1300 311960

width mm heigth mm

100055

311964

1300 311966

25www.ssg.eu

plug-in dividerS

• Divides the shelves for optimum

storage of small parts.

• Easily inserted between two shelves.

• Galvanized.

meSh dividerS

• Divides the shelves for optimum

storage of small parts.

• Easily inserted.

• Mesh sizes 45 x 50 mm and 50 x 50 mm.

• Can be combined with front plates.

• Galvanized.

meSh front plate

• Prevents stored goods from sliding through and falling off.

• Easily inserted.

• Can be combined with mesh divider.

• Galvanized.

SBS 150 ShelveS / 25 mm edge

depth mm heigth mm

300

140

312082

400 312083

500 312084

600 312085

SBS 150 ShelveS / 25 mm edge

width mm heigth mm

100080

312091

1300 312092

SBS 250 and 330 ShelveS / 40 mm edge

width mm heigth mm

100080

312094

1300 312095

for 150 Shelf / 25 mm edge

height mmdepth mm

400 500 600

200 312005 312021 312037

300 312009 312025 312041

400 312013 312029 312045

500 312017 312033 312049

26 www.ssg.eu

metal dividerS

• For optimum subdivision

of the bulk goods.

• Height at front 100 mm;

height at rear 200 mm.

• Galvanized.

meSh BaSket

• For shelving measuring 1000 mm width and 500 mm depth.

• 35 kg load bearing capacity where load is evenly distributed.

• Mesh width of 27 mm.

• Complete with 4 pcs. universal supports (Art. No. 311896).

• Supplied without mesh divider.

• Gloss Galvanized.

meSh dividerfor mesh baskets

• Galvanized. Art. No. 312097

Smallpart Storage

• For storing small parts and bulk goods.

• Bulk goods trays are placed on the shelves.

• Consist of front and rear component, as well as

2 pcs. metal sides (without metal dividers).

• Height at front 100 mm; height at rear 200 mm.

• Additional metal dividers can be used for

optimum subdivision of the bulk goods.

• At least one metal divider needed per bulk goods tray.

• Galvanized.

Slanted Shelf with divider

• With adjusting hole-system for dividers.

• Slanted shelf, Galvanized; long crossbar RAL 7035 Light Grey.

depth mm

300 312101

400 312103

500 312105

600 312107

width mm depth mm heigth mm

950 500 240 312096

depth mm width mm

300

1000

312102

400 312104

500 312106

600 312108

depth mm width mm

Slanted shelves incl. 2 pcs long crossbars 500 1000 312098

divider galvanized 312099

front mesh galvanized 312100

27www.ssg.eu

drip tray

• Can be positioned between the T-profile frames.

• Galvanized.

rod holder

• Available for shelving depths of 400, 600 and 800 mm.

• For storing long items, such as rods, profiles, etc.

• Fixed to the T-profile frames.

• Consists of upper and lower part.

• RAL 7035 Light Grey.

wardroBe pole

• For hanging storage of workwear etc.

• Complete with brackets and screws.

• Reinforced wardrobe pole on request.

• Gloss galvanized.

width mm depth mm capacity - liter

950 650 30 312112

SBS guard for liQuid containerS

• 1 pcs. locking bar, 2 pcs. angle brackets.

• For securing liquid containers, e.g., oil containers.

• For shelving - width 1000 mm.

• RAL 7035 Light Grey.

width mm

1000 312113

depth mm

400 312114

500 312115

600 312116

length mm max load

1000 45 312110

28 www.ssg.eu

extendaBle ShelveS

• Telescopic rails with ball bearings.

• For 500 mm deep shelving (shelf depth 440 mm);

extension 88%.

• 300 mm depth – extension 100%.

• 70 kg load bearing capacity where load is evenly distributed.

• Galvanized and RAL 7035 Light Grey.

Shelving drawer

• 1000 mm shelf width.

• 100% fully removable drawer on telescopic slides.

• 70 kg load bearing capacity where load is evenly distributed.

• Grip with labelling field and transparent laminate.

• Drawer open at top (a shelf is suitable as a top cover).

• Internal drawer dimension: 856 mm.

• RAL 7035 Light Grey.

Shelving drawer, set of three.Shelf as cover optional.

note: Shelving units with drawers must always be secured against tilting.

width mm depth mm

1000 300 312121

1000 500 312123

SBS drawer

heigth mm width mm depth mm

100 1000 500 312118

SBS drawer, Set of 3 pcS

heigth mm width mm depth mm

300 1000 500 312119

divider Setfor shelving drawer

for SBS drawer h=100 mm 312143

height 70 mm, consist of:1 compartment of 214 mm width5 compartment of 107 mm width2 compartment of 53 mm width

2 pcs. dividers in each compartment.

29www.ssg.eu

Shelving SyStem in two levelS – Special colour on reQueSt

30 www.ssg.eu

31www.ssg.eu

createurene.no

www.ssg.eu

Scandinavian Storage group aSPostboks 33 Vollebekk Brobekkveien 107 / NO-0516 Oslo / NorwayTlf +47 23 37 46 50 / Fax +47 23 37 46 51 post@ssg.no