SOUNDGUARDSOUNDGUARD®

MARINE RANGE SUMMARY

High performance noise controlPyrotek Soundguard manufactures and sells some of the most technically advanced, specialised vibration, noise control and fi re protection materials in the world today. This brochure provides summary information on the Marine product range. Detailed information and technical specifi cation sheets are available for each product on request.

Quality Assurance – ISO9001:2000

Specialist technical expertise

Proudly Australian made

Azzura M

arine Warw

ick 76 Gram

ac

SOUNDGUARDSOUNDGUARD ®

MARINE RANGE SUMMARY

SORBERFLEX® Composite Sandwich - Decoupled Flexible Noise Barrierwith Absorptive Foam Facing

Sorberfl ex® is a composite sandwich material comprising of a fl exible high

mass noise barrier, based on Wavebar® technology, laminated between two

layers of fl exible acoustic foam. Both the decoupling foam and absorptive

layer are composed of Soundguard’s Sorberfoam™ combustion modifi ed,

polyether polyurethane foam that provides excellent hydrolysis resistance.

This foam is especially suited for use in wet and humid areas, such as boats

or tropical environments.

The construction of Sorberfl ex® increases overall transmission loss through

the use of the decoupled barrier and provides a high degree of sound

absorption thereby reducing reverberant noise levels.

APPLICATIONS

Engine compartments and bulkheads of boats•

Ancilliary machinery & equipment enclosures•

Spa motor enclosures•

Generator enclosures•

Pump motor enclosures•

Compressor enclosures•

SILENTSTEP® PREMIUMDecoupled Flexible Noise Barrier with Abrasion Resistant Facing

Silentstep® Premium is an inexpensive high

performance acoustic carpet underlay that

offers excellent support for all types of carpet and provides signifi cant

reduction in transfer of air-borne and impact noise between fl oors, when

laid on most types of fl ooring. It performs especially well on lightweight

fl ooring materials such as timber, fi breglass and composite panel materials.

Easy to cut and lay, Silentstep® Premium uses a decoupled mass barrier

approach and is composed of a fl exible, high mass (8kg/m2) noise barrier,

based on Wavebar® technology, laminated to a layer of high performance

10mm thick, decoupling foam.

This product is especially suited for use in wet and humid areas, such as boats

or tropical environments. When used under carpet, Silentstep® Premium

provides excellent reduction in both airborne and impact noise from the fl oor

above into the room directly below.

APPLICATIONS

Upper and mid deck fl oor covering, under carpet in marine applications•

Bulkheads of boats, trucks, buses and construction machinery•

Lightweight partition panels in marine and transportation applications•

Outer covering on generator set and pump motor enclosures•

SUBDUE®

Damped Airborne Noise Barrier

Subdue® is an easily installed, damped, airborne

transmission loss barrier engineered for quality

construction of fl oated interiors in marine

applications. For areas where high noise reduction

measures are required, the range of Subdue®

products provide unique benefi ts for the boat

builder and boat owner.

Subdue® is a specialty product consisting of unique cores laminated between

two layers of appropriate grades of marine plywood. Due to the light weight

and stiffness of standard marine ply, airborne sound is easily transferred

through partitions and soles. Standard ply also vibrates signifi cantly from

the transfer of structure-borne energy. Being fully damped, with improved

transmission loss properties, Subdue® provides a signifi cantly lower noise

and vibration levels throughout the interior of the vessel. When used in

conjunction with Sylomer® (an elastic vibration isolation material), a fully

fl oating (isolated) interior is achieved, further enhancing the comfort for

owners & guests.

APPLICATIONS

Floating fl oors / decks •

Acoustic enclosures•

Engine covers•

Acoustic doors•

Acoustic partitions / bulkhead linings •

BARRIERS

QUADZERO®

Foil Faced Flexible Noise Barrier Range

Quadzero® is a range of foil faced fl exible noise barrier materials, built on the

respected Wavebar® series. Quadzero® exhibits four zero performance to AS

1530.3-1999 and low spread of fl ame & smoke index, and as such meets all

current marine and building requirements for fi re resistance. The refl ective

foil facing provides fi re resistance and additional thermal performance when

Quadzero® is used in marine and building applications.

With ease to cut and install, Quadzero® has excellent sound transmission loss

due to being highly fl exible. Quadzero® remains the easiest and most effective

means to reduce noise through partition walls, bulkheads and deckheads in

marine vessels, buildings, automobiles and trucks.

APPLICATIONS

Marine vessels •

Replacement for toxic lead sheeting•

High privacy partition wall linings•

Flex mass barrier of engine rooms bulkhead & deckheads•

SOUNDPAINT® SP150Water Based Vibration Damping Compound

Soundpaint® SP150 is fast drying, high solids water based viscoelastic vibration

damping compound. The unique formulation outperforms other similar

compounds. The exceptional vibration damping properties are complemented by

ease of use, environmental friendliness and, when dry, low combustibility .

IMO A653-16 compliant, Soundpaint® SP150 is a thixotropic paste.

Soundpaint® SP150 is specially designed for trowel, brush, roll-on and air-gun

spray applications. Once dry, the cured fi lm is UV resistant, water resistant

and chip resistant.

APPLICATIONSBoat hulls, decks, deckheads and bulkheads•

Interior of superstructure•

Ancilliary machinery and equipment •

enclosures

Machinery guards•

Stainless steel fabrications eg sinks, bowls•

Generator set enclosures•

Compressor enclosures•

SOUNDSTEEL® MPM Constrained layer steel/plastic/steel sandwich laminate

Soundsteel® MPM is a fully damped steel composite comprising two layers

of steel laminated together using a layer of a viscoelastic, thermoplastic to

form the laminate. Using the “constrained layer” principle, the function of

the thermoplastic interlayer is to damp disturbing structure borne sound.

Soundsteel® MPM is free from resonance and coincidence phenomena which

often detract from the performance of other acoustic insulation materials.

Using electrogalvanised, cold-rolled, low carbon steel allows the laminate to

be used as a structural material in equipment construction. Soundsteel® can

be used as a structural acoustic material in walls, doors, chutes, enclosures

and hoods. Because of the steel base material, Soundsteel® MPM can be

used in severe environments which other materials cannot withstand.

APPLICATIONS

Engine rooms for high speed craft / vessels•

Machinery and equipment enclosures•

Compressor and generator set enclosures•

Acoustic hoods and chutes•

Conveyor systems, crushers / granulators•

Coin counters•

Air conditioners•

Automotive sumps and panels•

Acoustic walls and doors•

SYLOMER® Vibration Isolation

Sylomer® – the special PUR-Elastomer by

Getzner – is used in its cellular or compact

form for many applications in civil engineering

and machinery. In most of them, Sylomer® is

used as an elastic interlayer like a spring. The

characteristics of this spring can be adapted to

the need of application and of the construction, or the construction method by

selecting the Sylomer® –type, the thickness and the loaded surface area.

The fi ne cellular structure allows for the necessary defl ection when loaded

statically or dynamically, so that elastic bearings with full surface contact and

low power transmission density become possible. This is a big advantage in

construction, design and economy, especially in civil engineering.

APPLICATIONS

Elastic foundation and strip bearings for vibration insulation for tools, •

machinery, boilers etc

Elastic mounting elements for insulating motors, gear units, pressure lines•

Highly elastic seals for housing doors, hydraulic cylinders•

Elastic impact mats / components for gripping equipment, clamp pads & •

stamp presses

Transport rollers / belts for copying, packaging & conveyor equipment•

Buffers and stops for cableway cabins, chair lifts & machine tools•

Wear resistant surfaces for loading bins, containers and conveyance •

systems

DAMPERS

SOUNDAMP™ DC30 Two Component Polyurethane Damping Paste

Soundamp™ DC30 is a two-component

polyurethane based damping paste.

Soundamp™ DC30 works best in a constrained

layer confi guration, (sandwich system) where

maximum advantage can be taken of its

excellent visco-elastic damping properties. The

high level of vibration damping achieved using Soundamp™ DC30 results in

substantial reductions in structure-radiated air-borne sound.

Soundamp™ DC30 performs well over a wide temperature and frequency

range enabling it to be used in a multitude of applications especially in

marine environments.

APPLICATIONS

Marine applications on the hull, deck and bulkheads to reduce vibration •

noise and structure borne noise

Floors to reduce impact noise•

Heavy construction industries such as earthmoving equipment•

Portable generator and pump units•

Automotive / transport / rail industry•

INSULCOAT TRPThermal Insulation Coating

Insulcoat TRP is a multipurpose coating formulated to provide excellent thermal

insulation and protection against condensation (anti-condensation coating). It

is VOC friendly, non-toxic, non-combustible and water based, and is designed

primarily for solving thermal insulation challenges in marine vessels.

Applied to the hull and super structure, Insulcoat TRP reduces the thermal fl ux

of the system, thereby providing insulation and anti condensation protection in

waters ranging from Antarctic to subtropical. Typically used at a dry fi lm thickness

between 1mm and 3mm, Insulcoat TRP exhibits insulation performance

normally observed from 50mm thermal blanket.

APPLICATIONS

Marine vessel hull and super structure as •

an anti-condensation coating

Marine super structure as thermal •

insulation coating

Underside of metal deck roofi ng to reduce •

heat fl ux or condensation

Exterior casings of refrigeration units•

ABSORBERS

SORBERFOAM™ ALRReinforced Aluminium Faced Acoustic Foam

Sorberfoam™ ALR is a reinforced, aluminium foil faced, acoustic foam with

low fl ammability and smoke emission. The aluminium facing is more fl exible

than thicker, non-reinforced foils. The thin aluminium foil provides a fl ame

resistant, light and heat refl ective facing which protects the foam from the

ingress of dust, oil and other contaminants. The reinforcing scrim provides

strength and tear resistance to the foil.

The acoustic foam layer provides high sound absorption and thermal

insulation and has excellent performance in the critical mid-frequency

region. The foam is hydrolysis resistant so it is particularly well suited for

use in marine, industrial and tropical environments.

APPLICATIONS

Machinery and equipment enclosures•

Compressor and generator set enclosures•

Boat engine compartments•

Air conditioners•

Buses, trucks and cars- under-bonnet insulation and interior sound •

absorption

Headlining•

Electronic and electrical equipment•

Wall and ceiling linings for plant and equipment rooms•

SORBERMEL® ALRReinforced Aluminium Faced Fire Retardant Melamine Foam

Sorbermel® ALR is made from a reinforced

aluminium faced open-cell, fl exible, melamine

resin based foam, featuring a delicate

three-dimensional fi ligree network structure,

formed from slender and hence readily

thermoformable fi laments.

This foam structure provides Sorbermel® its unique sound absorptive

properties. The melamine backbone exhibits excellent resistance to hydrolysis

and combustion. The use of a reinforced aluminium facing enhances mid to

low frequency absorption and provides additional protection to the foam from

mechanical stress and dirt, oil and liquid ingress. It also enhances the fi re and

thermal insulation performance of the foam.

APPLICATIONS

Marine engine compartment and cabin insulation •

Machinery and equipment enclosures•

Compressor and generator set enclosures•

Air conditioners•

Buses, trucks and cars- under bonnet insulation and interior sound •

absorption

Headlining•

Electronic and electrical equipment •

Wall and ceiling linings for plant and equipment rooms•

Baffl es, screens and partitions•

SORBERSCREEN® Advanced Perforated Metal Sound Absorber

Sorberscreen® perforated metal screen with

a fl ow resistant backing textile, offers high

performance sound absorption. The product has

a hard durable fi nish with aesthetic appeal. It is the perfect fi nish for sound

absorption in engine rooms, soundproof enclosures and architectural building

wall and ceiling absorptive panel applications.

Sorberscreen® is combined with Sorbertex® P44, a black acoustic textile

that reduces airborne sound due to its inherent airfl ow resistance. The

Sorbertex® P44 converts sound energy to heat energy thus reducing noise.

Sorberscreen® is made from either marine grade aluminium sheet or

galvanised steel. It can be easily powder coated or spray-painted to any colour

required, before backing with Soundguard® Sorbertex® P44 absorptive textile.

APPLICATIONS

Acoustic wall and ceiling panels in all types of buildings•

Wall and ceiling insulation in marine engine rooms•

Lining of acoustic enclosures•

Acoustic baffl es•

Interior decorative wall absorbers•

Pyrotek Soundguard works with selected affi liate companies to offer clients complete solutions.

AFFILIATES

Foil Faced Marine BlanketFlexible High Temperature Insulation Blanket

FyreWrap Foil Faced Marine Blanket products from Unifrax are specifi cally

designed to provide passive fi re protection for marine applications. FyreWrap

Marine Blanket allows for thermal and acoustical insulation with reduced

structural weight. It is US Coast Guard approved for steel and aluminium

vessels, complies with SOLAS safety objectives, and IMO FTP Code fi re

test requirements. FyreWrap is used to insulate bulkheads and decks on

commercial and military vessels and also offshore structures.

Fyrewrap Marine Blanket provides fi re protection insulation for a variety

of rated assemblies on marine structures and vessels. Thin, lightweight,

fl exible systems result in lower installation costs and signifi cant weight

savings, offering builders and owners reduced structure weight which may

yield increased vessel speed, fuel savings and

available payloads.

BENEFITS

Approved systems for structural fi re •

protection for engine rooms

A rated systems for steel, aluminium and •

composite structures

Non combustible material•

Certifi ed to IMO A.754 (18)•

LITECORE™Ultra lightweight marine panels

Litecore™ is a new ultra-lightweight concept

in marine panel technology. The core material

consists of Skamol SuperPro 225 or Skamol

SuperPro 300 made of calcium silicate. The panels are low weight, have high

insulation value, and are manufactured from environmentally friendly materials.

The benefi ts of Litecore™ panels are their stability, lightweight, and ease of

tooling. Approved acc to IMO A.754(18) and MSC.61(67), Litecore™ marine

panels can be processed to customer requirement, for example, decorative

HPL laminate, paper, glass tissue, veneers, plywood, steel sheets or

aluminium sheets.

APPLICATIONS

Cruise and ferry•

High speed ships•

Bulk carriers (coasters) – Fishing boats / fl eet •

Offshore industry (oil rigs)•

Approvals & DNV Certifi ed for:

B-0, B-15, B-30, A-60 Tongue & Groove & H-120 Tongue & Groove

Marine Exhaust Systems

DeAngelo Marine Exhaust is the industry leader in the design, engineering,

manufacture and installation of quality marine exhaust systems. DeAngelo

Marine Exhaust can manage clients exhaust project, including hull

penetration locations, geometry, auxiliary cooling requirements, attenuation

and temperature restrictions. DeAngelo offer a proprietary cooling process

technology that is unmatched.

DeAngelo professionals understand the delicate balance between maximum

allowable exhaust back pressure, exhaust temperature, noise attenuation,

raw water intake and engine room serviceability. We take these fundamental

elements and apply superior design expertise to create a product that will

yield years of trouble free performance.

SERVICES

Professional engineering and design work•

Computer aided design (CAD) Services •

On site application and engineering and exhaust fi t measurement services •

Complete installation and service •

Quality assurance •

Fibreglass Marine Wet Exhaust Solutions

Centek Industries have been in business for over

40 years and are recognised as the world leader

in wet exhaust solutions. All of their fi breglass muffl ers utilise the highest quality

resin designed specifi cally to offer the most in terms of heat and fi re resistance.

As a result, Centek products are Lloyds Register Certifi ed, carry an ABS Type

approval and meet or exceed ABYC-P1 standards.

Centek Industries is an engineering driven company and is able to offer

custom solutions to satisfy specifi c client needs and offers a complete line of

muffl ers including in-line, lift, water-gas separators and combination lift / gas

water separators.

APPLICATIONS

Main engine exhaust muffl ers•

Generator set, water separators and muffl ers•

C EN T E K I N DU S T R I E S

SOUNDLAG® WAVEBAR® QUADZERO® SOUNDPAINT® SOUNDSTEEL® SOUNDUNE® SILENTSTEP® SUBDUE® SORBERTEX® SORBERFLEX® SORBERSCREEN®

SOUNDGUARD ® is a Registered Trademark of PYROTEK ® P/L | This document is covered by Pyrotek standard disclaimer, warranty and © Copyright clauses.

CONTACT US

AUSTRALIA

1300 136 662

+61 2 8868 2088

NEW ZEALAND

0800 266 878 427

+64 9 272 2056

USA

+1 509 926 6212

www.soundguard.com.au

CHINA

+86 755 8601 6743

DUBAI

+971 50 624 9254

TAIWAN

+886 7 224 8222

www.tcmaxis.com

Distributor:

Taiwan Office 62 Lane 939 Zhonghua 5th Rd 806 Kaohsiung TaiwanTel: +886 7 5362583 Fax: +886 7 5367267 Mob: +886 989466874 Em: tom@tcmaxis.com

Australia Office

12/11-21 Ocean St, Narrabeen, NSW, 2101Tel: +61 2 99708251 Fax: +61 2 99708261 Mob: +61 415623985 Em: rob@tcmaxis.com