st flyer
TRANSCRIPT
![Page 1: ST flyer](https://reader035.vdocuments.net/reader035/viewer/2022071903/55c53828bb61eb04048b467b/html5/thumbnails/1.jpg)
Bodycote Surface Technology Limited Springwood Court, Springwood Close Tytherington Business Park Macclesfield Cheshire, SK10 2XF United Kingdom Tel: +44 1625 505300 E-mail: [email protected] Web: www.bodycote.com
© Bodycote - Ref: ST/O&G/Aug2014/rev1
Surface Technology Services
Specialised coatings are used extensively to prolong the working life of components and protect them from environmental factors such as corrosion, abrasion and erosion. The range of coatings and services available from Bodycote covers a wide variety of applications, providing solutions for manufacturers in the Oil & Gas sector. Bodycote offers a single solution service; alleviating the need for customers to use numerous contractors and, in doing so, dramatically reducing many of the risks associated with multi operational manufacturing. Bodycote operates a range of robotically controlled coating booths, providing a maximum coating capacity of up to 6m in length by 1.5m diameter, and up to 2 tonnes in weight.
Bodycote provides: Complete service solution Manufacture of components
Machine, coat and finish grind of components up to 4m
length Large capacity Skilled workforce Focus on service
- Consistent quality - Reliable delivery - Speed of response
Fast-track service options
Thermal spray services: HVOF Plasma spray Arc wire spray Flame spray
Typical coatings applied: Carbides Metallics Ceramics Abradables Coating benefits: Increased corrosion and chemical resistance Wear and erosion resistance at high and low
service temperatures Electrically conductive or thermally insulating Abrasion resistance Dimensional restoration
Typical applications Down-hole tools Mandrels Pump components
Full manufacture and refurbishment of
impellers, pump shafts, balance drums,
diffusers, sleeves and wear rings
Seals
Manufacturing, finishing and inspection Capability for complete manufacture of
components. Machine shop with both conventional and
CNC machines capable up to 4 metre length Grinding shop with diamond grinding of
components up to 4 metre length and 500mm diameter and superfinishing capabilities.
Coating sealing Shot peening. 200 ton straightening press 3m Co-ordinate Measuring (CMM) Machine Full metallurgical laboratory facilities
Machining – Coating – Finishing