stage 3: finishing renders - roofing supplies · pdf file stage 3: finishing renders insulclad...

Click here to load reader

Post on 14-Jun-2020

5 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • RENDERED WALL SYSTEM

    PROCESS C0 M90 Y85 K0

    1300 78 74 78 www.insulclad.com.au

    Stage 3: Finishing Renders

    Insulclad Finishing Renders are polymer modifi ed cement based renders that are specially formulated for superior coverage and adhesion. Choose between Coarse, Medium or Fine fi nishes. Application methods will vary with each fi nish. Check the Render Finishes Guide to determine the application sequence that applies to your selected fi nish.

    Insulclad Coarse Float, Medium Float and Fine Skim Finishing Renders can be used as: • A fi nish coat render on Insulclad Core Panel polystyrene system when Insulclad Base Render is applied fi rst or, • A fi nish coat render on Insulclad Pre-Mesh Panel polystyrene system. • A general purpose render fi nish coat for blue board, Hebel, brick or block work and other masonry substrates.

    Finishing Renders

    1 32FIXING PREP FINISH

    THE THREE STAGE INSULCLAD WALL SYSTEM

  • RENDERED WALL SYSTEM

    PROCESS C0 M90 Y85 K0

    1300 78 74 78 www.insulclad.com.au

    INSULCLAD RENDER FINISHES

    Coat sequences to achieve a desired fi nish

    Scan here for full installation instructions

    Achieve your desired fi nish...

    1 32FIXING PREP FINISH

    THE THREE STAGE INSULCLAD WALL SYSTEM

    CORE PANEL No. of Coats

    Thickness Range Coverage

    Finish Sequence Min. Max. m²/Bag*

    Fine Base 1 coat 3mm 4mm 4

    Medium 2 coats 1mm 2.5mm 12

    Fine 1 coat 1mm 2.5mm 14

    Total Minimum No. of Coats 4 6 11.5

    Medium Base 1 coat 3mm 4mm 4

    Medium 2 coats 1mm 2.5mm 12

    Total Minimum No. of Coats 3 5 9

    Coarse Base 1 coat 3mm 4mm 4

    Medium 1 coat 1mm 2.5mm 12

    Coarse 1 coat 2mm 3mm 8

    Total Minimum No. of Coats 3 6 9.5

    PRE-MESH PANEL No. of Coats

    Thickness Range Coverage

    Finish Sequence Min. Max. m²/Bag*

    Fine Medium 2 coats 1mm 2.5mm 12

    Fine 1 coat 1mm 2.5mm 14

    Total Minimum No. of Coats 3 3 7.5

    Medium Coarse 1 coat 2mm 3mm 8

    Medium 1 coat 1mm 2.5mm 12

    Total Minimum No. of Coats 2 3 5.5

    Coarse Coarse 2 coats 2mm 3mm 8

    Total Minimum No. of Coats 2 4 6

    * Coverage specifi ed is at minimum recommended thickness

    * Coverage specifi ed is at minimum recommended thickness