STONERA SYSTEMS PVT. LTD

Tel : +9180 42666222 | Fax : 42666223 | Email : contact@stonera.com | Web : www.stonera.com

#793, 11th Cross, 27th Main Road,Sector - 1, HSR Layout, Bangalore - 560 102. INDIA

Cleaners, Protectors,

Stain and Rust Remover

for Stones

MOELLER CHEMIE

Chemicals For Engineered Marble:

R85 Composite Quartz Intensive Cleaner:

Is a special concentrated cleaner for removing fatty, oily and greasy substances, general construction dirt, cement and grout smears, wax coatings and film built up from regular cleaning products from polished, honed, satin and brushed composite quartz materials. It is available in LT1 packing.

S46 Composite Quartz Stain Protection:

S46 is a ready to use special impregnator that reduces the penetration of water, dirt, oil and grease into polished, honed, brushed and satin finished composite quartz surfaces. It is available in LT1 packing.

P11Composite Quartz care Cleaner:

Is a mild cleaning concentrate for daily cleaning and maintenance. Highly active ingredients quickly and thoroughly clean and maintain all composite quartz and porcelain surfaces. With regular use, surfaces become more resistant to stains and easier to clean. It is available in LT1 packing.

Chemicals for Porcelain/Ceramic/Vitrified Tiles:

R 61 – Porcelain Tile Cleaner (CLEANER):

An alkaline base cleaner for polished, honed and textured interior or exterior porcelain

tile. R 61 removes construction dirt, wax finishes, soot, grease and oil. Recommended

for initial cleaning prior to impregnation with S 43 Porcelain Tile Impregnator and for

periodic maintenance.

P15- Porcelain Tile Care Cleaner (POLISHER):

P15 is a mild concentrated cleaner with highly active ingredients that clean and

maintain honed, polished, textured and glazed porcelain tiles. P15 has been

specially developed to enhance the appearance of porcelain wall and floor tiles and

contains special ingredients that enrich the colour and structure of the surface. If

used regularly, a resistance to stains is developed and the tiles will become easier to

clean. Its water-soluble ingredients also prevent the buildup of film usually caused

by soap residue. It is available in LT1 packing.

S35 Stone Sealer – Matte Finish:

S35 is a ready to use colour enhancing surface sealant with a matte finish that reduces the penetration of water and dirt substances into honed, brushed, sandblasted, flamed or riven natural stone (soft and hard stones), agglomerates and terrazzo.

Sealants For Finished Surfaces (Leather Finish, Honed Finish Etc) :

S 43 – Porcelain Tile Impregnator (SEALANT):

A silicone base impregnator specifically designed for polished, honed and textured porcelain tile. For Interior and exterior use. Excellent protection against dirt, water, oil and alkali. Highly suited for bathrooms, kitchens and eating area. S43 is 98% permeable, UV resistant and leaves surfaces looking natural.It is available in LT1 packing.

S37 Stone Sealer – Satin finish:

S37 is a ready to use colour enhancing surface sealant with a satin finish that reduces the penetration of water and dirt substances into honed, brushed, sandblasted, flamed or riven natural stone (soft and hard stones), agglomerates and terrazzo. The colour and structure of the surface will be enriched, leaving a satin finish. Facilitates regular cleaning and overall maintenance, especially on rough and textured surfaces. It is available in LT1 packing.

S39 Stone Sealer – High gloss:

A modified acrylic base sealer which produces a tough, hard, and highly protective finish. S39 protects against water, dirt, oil, and citric acids. For interior and conditional exterior use for rough and textured mineral surfaces. Enhances the colour and texture, while leaving a high gloss finish. S39 is highly vapor permeable, UV resistant, and slip retardant. Not effective on polished, glazed or non-absorbing surfaces. It is available in LT1 packing.

S40 – Jobsite Protector/Grout Release:

A water base acrylic coating for jobsite application for interior and exterior use on all mineral; especially for rough, textured and flamed finishes. S 40 prevents the adhesion of cement and latex/resin modified grouts to the surface, and possible staining that might result from grout pigments. It also protects the surface against other construction dirt, and facilities the later clean up.It is available in LT1 packing.

S32W Stain Protection – Water base:

S32W is a solvent free water based impregnator that reduces the penetration of water, dirt and oil on soft and hard natural stone surfaces, agglomerates, concretes block, terracotta, brick and block paving, clay surfaces and unglazed tiles. Colour and texture will not be affected. It is available in LT1 packing. The colour and structure of the surface will be enriched, leaving a matte finish. Facilitates regular cleaning and overall maintenance, especlly on rough and textured surfaces. It is available in LT1 packing.

Cleaners for Marble & Granite:

R52 Oil and Wax Remover - Paste:

For use on all new and existing interior and exterior natural and cast stone, agglomerate terrazzo, ceramic/porcelain tile and cement surfaces, regardless of surface finish. Comes in paste for; ready to apply. Very effective in removing wax, oil and silicone stains left behind from grouting/sealants. It is available in LT1 packing.

Sealants For Polished Surface :

S31 – Silane Impregnator:

S 31 is a ready to use silane based impregnator that reduces the penetration of water and dirt into all natural stone surfaces (soft and hard stones), concrete and unglazed bricks. S 31 is vapour permeable, suitable for interior and exterior use, and will leave a little to no aesthetic change on the surface. Important: Clean surface thoroughly before treatment using R 55 Intensive Cleaner (diluted) followed by a flood rinse with water and allow at least 24 hours drying (max residual moisture of 6-8%) before sealing.

S34N Stain Protection - Extra:

S34N is a ready to use special impregnator which reduces the penetration of water, dirt, oil and grease into all natural stone surfaces (soft and hard stones), agglomerates and terrazzo. S34N is also suitable for polished surfaces. It is available in LT1 packing.

Clean the area to be treated thoroughly and allow the area to dry for atleast 1 day (max. residual moisture of 2 to 4%). Apply S34N generously and evenly with a natural bristle brush or a roller with short fibers. Repeat treatment for very absorbent surfaces after 24 hours. Any remaining residue can be loosened and wiped off by using a soft clean cloth moistened with S34N.

R54/R80 Stripper Stain Remover:

R54 is a ready to use solvent based stripper for removing old impregnators, wax treatments, vanish film built up from regular cleaning products, asphalt and bitumen, grease and oils from all natural and artificial stone surfaces. Ceramic and porcelain tiles, terracotta and brick and block paving. It is available in LT1 packing.

R60 Moss and Mildew Remover:

R 60 is a ready to use spray on cleaner for use on smaller surfaces. R 60 works fast to eliminate and prevent re-growth of moss, mould, fungus, lichens and mildew from steps, paths, gravestones, walls, garden ornaments etc. Polished surfaces are not damaged. R 60 is also extremely effective for bleaching organic stains caused by things such as coffee, cola, red wine, flowers, berries, fruits, fruit juices etc.

R63 Concrete Film Remover:

An extra strength, fast-acting, dilute acid type cleaner for all new and existing rough/textured interior and exterior natural and cast stone (use the milder R69 interior stone cleaner if acid fumes are a concern). R63 thoroughly removes construction dirt, grout residue, lime deposit, efflorescence, and rust from all surfaces. Not for use on polished/glazed surfaces. Avoid contact with metal; acid/fumes will cause etching. It is available in LT1 packing. R63 thoroughly removes construction dirt, grout residue, lime deposit, efflorescence, and rust from all surfaces.

R55 Intensive Cleaner:

R55 is a special concentrated cleaner for removing general construction dirt, emulsion paint wax coatings and residual film built up from regular cleaning products as well as oil, grease and light cement film from all natural and artificial stone surfaces. It is available in LT1 packing.

R70 Outside Stone Cleaner – Acid free :

R70 is a special long lasting acid free concentrated cleaner that removes general dirt eliminates and prevents the reformation of moss, mould and other vegetation from paths, patios, walls and steps made from natural and artificial stones and other forms of external paving.

Even externally dirty surfaces will become clean and bright again. R70 does not damage polished surfaces. It is available in LT1 packing.

R 75 – Exterior Stone Cleaner:

R 75 is a special concentrated acid based cleaner that removes cement film, lime scale, mortar residue, rust stains and heavy duty construction dirt from all acid tolerant natural and artificial stone surfaces.

The special rust-preventing additives in R75 make it especially suitable for cleaning rust susceptible hard stones, including those with polished finishes.It is available in LT1 packing.

R77 Rust Remover for hard Stone:

R77 is a ready to use acid based cleaner that removes rust spots and stains from all acid tolerant hard stone. Special additives reduce the development of rust after treatment. Suitable for polished surfaces.. It is available inLT1 and LT5 packing.

R79 Rust Remover for Soft Stone:

Is a special ready to use cleaner for use on all natural and artificial stone surfaces that removes rust sports caused by iron fertilizer, metal furniture, heater leaks etc. R79 contains special rust inhibitors that reduce future rust development. R79 is especially suitable for polished marble and limestone. It is available in LT0.475 packing.

P24 Liquid Stone Soap:

P24 is a mild concentrated natural soap for daily use. The highly active ingredients quickly and thoroughly clean and maintain all natural and artificial stones, brick paving, clay tiles and unglazed ceramic and porcelain tiles. If used regularly treated surfaces increase their resistance to stains as P24 forms an invisible dirt repellent film that helps to support existing impregnation, making regular maintenance easier. It is available in LT1 packing.

P 27 Re-Polishing Powder:

Is a polishing powder for repairing and renewing the polish of marble and limestone surfaces, using special polishing machines fitted with a white nylon polishing pads.It is available in KG1 packing.

P23 Polish Preserver:

A modified water base acrylic conditioner and maintenance sealer/cleaner for all honed and polished natural and cast stone. Exhibits excellent durability. Scuff, scratch, dirt resistant and slip retardant. Creates satin sheen on honed surface and gloss on polished surface with buffing. P23 is UV resistant and highly permeable.It is available in LT1 packing.

POLISHERS/SHINERS :