stainless and tough, meet the new
TRANSCRIPT
L I Q U I F L O C H E M I C A L P R O C E S S I N G P U M P S
TM
Copyright © 2005 Liquiflo, Inc.All rights reserved. 05-8 Centry
F E AT U R E SThe Liquiflo Centry® Series Centrifugal Pumps were exclusively designed for chemical, agricultural, general industrial, or specific OEM applications. Both economically-priced and ruggedly constructed, these pumps are madefrom heavy-walled investment cast 316 SS. Compared to other manufacturer’sproducts, the extra corrosion allowance offered by our Centry Series pumps willadd years of service life even when pumping harsh and corrosive chemicals.
In general purpose applications, they promise unequaled performance andyears of trouble-free operation. The back pullout design allows for quick andeasy maintenance since the volute can be kept in-line while the internal components of the pump are replaced or repaired. The Centry Series pumpsare available with either Mechanical Seal or Magnetic-Drive.
R u g g e d C o n s t r u c t i o nCentry® Series pumps are extremely durable and well-suited for aggressive chemical applications. Their oversized shafts reduce L3/D4 ratio minimizingunwanted shaft vibrations which extend the life of the seal and bearings.
CENTRY® SERIESL i q u i f l o C e n t r i f u g a l P u m p s CENTRY® SERIES
1
Centry® SeriesMag-Drive Centrifugal Pump
Centry® SeriesSealed Centrifugal Pump
Stainless and Tough, Meet the New...
Liquiflo Centry™ Series• Sealed or Mag-Drive
• 316 Stainless Steel Construction
• Flows Up to 150 GPM
• Heads Up to 100 Feet
• Close-Coupled
motralec 4 rue Lavoisier . ZA Lavoisier . 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48Demande de prix / e-mail : [email protected]
www.motralec.com
SEALED PUMP
MOTOR
Mechanically Sealed Pumps:
• Close-Coupled or Long-coupled mounting available.
• Type 21 Seals are standard withoptional Type 9 Seals available.
• Standard seal materials are Carbon Seal Face with Ceramic Seal Seat. Other options available.
• Closed Impeller improves pump performance, simplifies axial positioning of impeller and eliminates axial loads transmitted to motor bearings for extended service life.
• Back Pullout Design simplifies maintenance.
• Impeller Positioning Ring eliminates guesswork when trying to position impeller on close-coupled sealed pumps. With this unique design, a new or replacement sealed pump is fitted to the motor without having to adjust theimpeller position. The Centry Series is the only pump available with this feature.
2
Centry® Pumps620, 621 & 622
CLOSED IMPELLER Improves pump performance, simplifies axial positioning of impeller and eliminates axial loads transmitted to motor bearings for extended service life
RUGGED CONSTRUCTION Manufactured from heavy-walled 316 SS investment casting for added corrosion allowance when pumping aggressive chemicals
HEAVY-DUTY SHAFTReduces L3/D4 ratio, minimizing unwanted shaftvibrations which extend seal and bearing life
TM
Centry® PumpsFeatures of Sealed and Seal-less
TM
MAG-DRIVE PUMP
Mag-Dr ive Pumps:
• Double Support Sleeve Bearingsare standard in Carbon and alsoavailable in Silicon Carbide for ultra-thin or abrasive fluids. Thrust bearingsare standard in Silicon Carbide.
• Hard Ceramic Coated Shafts are standard which extends servicelife even when pumping thin or abrasive fluids. Optional Tungsten Carbide coating is also available.
• Samarium Cobalt Magnets are available in two sizes to meet specificapplication requirements.
• Available in a Close-Coupled or Power Frame design.
• Back Pullout Design simplifies maintenance.
3
Models Avai lab le
MODEL SIZE * (inches) MAX FLOW MAX HEAD
620 1 x 3/4 x 3 3/4 45 GPM 65 FT
621 11/4 x 1 x 5 85 GPM 100 FT
622 2 x 11/2 x 5 160 GPM 95 FT
* Suction Port Size x Discharge Port Size x Impeller Diameter
D I M E N S I O N A L C H A R T S ( i n c h e s )
DISCHARGE
SEALED MAG-DRIVE
SUCTION
A
B
MOTORLc
E
D
E
D
2.506.50
4.00
C5.943.50
AB SUCTIONDISCHARGE
Model Suction Discharge A B D E
620 1” 3/4” 6.56 1.31 2.75 2.25
621 11/4” 1” 5.83 1.32 3.50 2.75
622 2” 11/2” 6.70 2.12 3.82 3.12
Note: Drawings for Reference Only
2.500.41
DIA. THRU
Model Suction Discharge A B C D E
620 1” 3/4” 8.87 1.31 4.125 2.75 2.25
621 11/4” 1” 9.33 1.32 4.58 3.50 2.75
622 2” 11/2” 10.20 2.12 5.45 3.82 3.12
Note: Drawings for Reference Only
Motor
L I Q U I F L O C H E M I C A L P R O C E S S I N G P U M P S
MOTOR
TM
C h a l l e n g e U sW i t h Yo u r
To u g h e s tP u m p i n g
A p p l i c a t i o n s
L I Q U I F L O C H E M I C A L P R O C E S S I N G P U M P S
L i q u i f l o C e n t r i f u g a l P u m p s CENTRY® SERIES
4
Hea
d (
Feet
)
Flow (GPM)
30
25
20
15
10
5
0
5.0 4.5
4.0 3.5
3.0
BH
P
30105 400 50252015 4535
1.0
0.5
0
Hea
d (
Feet
)
Flow (GPM)
120
100
80
60
40
20
0
5.0 4.5
4.0 3.5
BH
P
602010 800 100504030 9070
5
4
3
2
1
0
Model 621 1.25 x 1 x 5 1750 RPM Model 621 1.25 x 1 x 5 3500 RPM
3.0
Hea
d (
Feet
)
Flow (GPM)
30
25
20
15
10
5
0
5.0
4.5
4.0
3.5
3.0
BH
P
502010 700 904030 8060
1.0
0.5
0
Model 622 2 x 1.5 x 5 1750 RPM Model 622 2 x 1.5 x 5 3500 RPM
Hea
d (
Feet
)
Flow (GPM)
120
100
80
60
40
20
0
5.0
4.5
4.0
3.5
3.0
BH
P
1004020 1400 1808060 160120
543210
0.25
0
15105 200
Hea
d (
Feet
)
25
Flow (GPM)
20
18
16
14
12
10
8
6
4
2
0
3.75 3.50
3.25 3.00
2.75
BH
P
1.5
1.0
0.5
0
Hea
d (
Feet
)
Flow (GPM)
80
70
60
50
40
30
20
10
0
3.75 3.50
3.25 3.00
2.75
BH
P
30105 400 50252015 4535
Model 620 1 x 0.75 x 3.75 1750 RPM Model 620 1 x 0.75 x 3.75 3500 RPM
motralec 4 rue Lavoisier . ZA Lavoisier . 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48Demande de prix / e-mail : [email protected]
www.motralec.com