Insert the grille at an angle to bypass the base tray clips along the bottom rim. Push the grille up and into the grille holding clips.

Insert the wire tray clip intothe holes along the bottomlip of the cage body.

12

3 4

Finial attaches to the roof in four places. Hold the nut in place on the inside and, from the outside, screw in the phillips head screw.

× 4 sets

Stainless Steel Home Series#150 Lotus • #151 Empress • #152 Dynasty

read first REVIEW BEFORE ASSEMBLY

• NOTE: Assembly is the samefor all Stainless Steel models.

• TOOLS: A small head Phillipsscrewdriver is required.

For assistance or replacementparts, please contact Prevue:

TOLL-FREE 800.243.3624ONLINE www.prevuepet.comEMAIL customerservice @ prevuepet.com

150-151-152— 10 /15— USL Made in China for Prevue Pet Products, Inc., Chicago IL USA www.prevuepet.com 800 243-3624 customerservice@prevuepet.com

1 To install the FINIAL, you willneed these pieces:

2 To attach the tray base, you will first need to install thewire TRAY CLIP piece:

3 To install the FLOOR GRILLE,you will need this piece:

Insert the slotted perchends into the vertical cagewires. Let the perch reston the heavy horizontal bar for stability.

CLICK

With the tray base off-center, tuck the lip into one of the integratedbase clips...

...rotate the base to tuck the lipinto the second clip...

...and lock the base intoplace with the wire clip.

150-151-152— 10 /15— USL For more wonderful cages, toys, and accessories for dogs, cats, birds, chickens, rabbits, ferrets and small animals, visit www.prevuepet.com

4 To install the TRAY BASE, you will need this piece:

5 To attach the FOOD/WATERCUPS, you will need thesepieces:

6 To install the decorative PERCH, you will need thispiece:

Turn the cup sideways, poke the knob (along thecup’s metal band )through the cage wires...

...then twist the cup upright, locking the knob into the cage wires.