stainless steel submersible pump brochure
DESCRIPTION
Stainless Steel Submersible Pump BrochureTRANSCRIPT
-
Stainless SteelSubmersible Pumps
-
2
All the internal and external metal components of the pump are constructed of stainless steel throughout and are cold pressed from stainless steel sheet.
The bearings and the neck rings are made of special high nitrile content rubber to ensure excellent resistance to wear and abrasion by sand suspended in the well water.
Pump identification code
Number of stagesNominal flow rate in GPMStainless steel submersible pump
ATP 35 - 12
General SpecificationsCapacity from 2 to 350 GPM.Head up to 1700 feet.Motor rating up to 10 HP (4 motor) and 60 HP (6 motor).Vertical and horizontal position of operation.Maximum fluid temperature 86 F (30C) (for higher temperatures, please contact us).Maximum allowable amount of sand: 50 g/m3
About ATP 4 & 6Stainless Steel Pumps
Coupling with 4 and 6 Nema standard for motor.All parts out of stainless steel AISI 304 or AISI 316.
Applications Domestic and general water supply.Sprinkler and drip irrigation systems.Pressure boosting.Fountains and water displays.Lowering of groundwater level.Other industrial applications.
Construction features Coupling and flange suitable for motors with pump mounting dimensions in accordance with NEMAstandards.Jam free check valve, built into the discharge chamber, designed for low loss of head.Generously dimensioned intermediate bearings located at each pump stage to align the shaft, specially designed to optimize lubrication.Easy-to-replace wear-rings and bearings.Rugged cable guard.Hydraulic profiles are optimized for the attainment of high efficiencies.Resistance to corrosion and abrasion, i.e. the same inherent qualities of stainless steel.Very strong construction: minimum thickness of stainless steel sheet of 1 mm, 6 spot weldings on each vane, special top bearing for every pump, very rugged coupling on the shaft, 4 straps ...Great ease of dismantling and assembly.
Top Diuser and Upper Bearing
Impeller
Diuser
Pump Shaft, Motor Coupling,Spacers and Pin
-
Pump Section and list of main components
Radial Flow Pump
4 ATP 104 ATP 164 ATP 224 ATP 35
1 Discharge chamber
2 Valve cone3 Valve seat
4 Retainer for valve seat5 Hook6 Top diffuser7 Spacer8 Top bearing9 Nut M8
10 Washer11 Diffuser
12 Impeller
13 Neck ring14 Intermediate bearing15 Bottom diffuser16 Suction interconnector17 Strainer18 Spacer19 Shaft with NEMA coupling20 Cable guard
21 Strap22 Nut M8
3
Mixed Flow Pump
4 ATP 60
304 Stainless Steel304 Stainless SteelNBR/316 Stainless SteelNBR/316 Stainless Steel
304 Stainless Steel304 Stainless SteelNBR
304 Stainless Steel
304 Stainless SteelNBR/316 Stainless SteelNBR304 Stainless Steel304 Stainless Steel304 Stainless Steel
304 Stainless Steel304 Stainless Steel
304 Stainless Steel
304 Stainless Steel
300 Stainless Steel
300 Stainless Steel300 Stainless Steel
300 Stainless Steel
Item Description Material Item Description Material
6 ATP 1506 ATP 2306 ATP 300
4, 6
0 H
z, S
tain
less
Ste
el S
ubm
ersi
ble
Pum
ps
-
ATP Submersible PumpsType ATP 10
Specifications subject to change without notice.4 motor standard, 3450 RPM.
Performance conforms to ISO 9906 Annex A.
4
Motor Dimensions in inches Weight in lbsPump Model [KW][HP] A B C Pump End Pump+Motor
ATP 10-6ATP 10-9ATP 10-12ATP 10-15ATP 10-21ATP 10-27ATP 10-34ATP 10-41ATP 10-48ATP 10-54ATP 10-62
1
11/22
3
5
5
5
5
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.7
3.7
3.7
3.7
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1/23/4
13.7
16.6
19.5
22.3
40.3
47.0
53.6
58.3
66.0
22.5
26.1
30.2
34.1
41.6
49.2
60.9
70.6
77.2
81.9
89.6
3.8 3.9
8.6
11.0
13.5
15.9
20.3
24.9
30.4
36.0
41.7
44.5
53.3
26.7
29.1
34.5
39.9
48.3
57.9
71.4
91.0
96.7
99.5
108.3
Disch.Size D E
1/3
34.1
13.6
10.7
11.8
9.5
15.1
20.6
23.6
23.6
23.6
23.6
8.8
DIMENSIONS AND WEIGHTS
28.0
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
NOTES: Specifications subject to change without notice.
4, 6
0 H
z, S
tain
less
Ste
el S
ubm
ersi
ble
Pum
psH
EAD
IN M
ETERSHEA
D IN
FEE
T
CAPACITY IN GPM
CAPACITY IN M /H3
Operational Range
4, 60 Hz, Stainless Steel Subm
ersible Pumps
-
ATP Submersible PumpsType ATP 16
Specifications subject to change without notice.4 motor standard, 3450 RPM.
Performance conforms to ISO 9906 Annex A.
5
ATP 16-5ATP 16-8ATP 16-10ATP 16-14ATP 16-18ATP 16-24ATP 16-31ATP 16-41ATP 16-51ATP 16-62
1
11/22
3
5
5
0.37
0.55
0.75
1.1
1.5
2.2
3.7
3.7
12.8
15.6
16.8
21.3
37.5
47.0
55.5
66.0
22.3
26.3
28.6
34.9
40.2
51.4
61.1
70.6
83.7
94.2
3.8 3.9
7.7
10.4
11.7
14.8
18.1
22.5
28.2
35.9
41.2
49.1
26.7
31.4
35.7
42.8
51.1
63.5
83.2
90.2
111.2
119.1
30.8
13.6
10.7
11.8
9.5
15.1
20.6
23.6
23.6
28.2
25.1
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
NOTES: Specifications subject to change without notice.
71/271/2
5.5
5.5
28.2
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1/23/4
4, 60 Hz, Stainless Steel Subm
ersible Pumps
HEA
D IN
METERSH
EAD
IN F
EET
CAPACITY IN GPM
CAPACITY IN M /H3
Operational Range
Motor Dimensions in inches Weight in lbsPump Model [KW][HP] A B C Pump End Pump+Motor
Disch.Size D E
DIMENSIONS AND WEIGHTS
-
ATP Submersible PumpsType ATP 22
Specifications subject to change without notice.4 motor standard, 3450 RPM.
Performance conforms to ISO 9906 Annex A.
6
ATP 22-4ATP 22-6ATP 22-7ATP 22-10ATP 22-13ATP 22-19ATP 22-26ATP 22-31ATP 22-39ATP 22-47
1
2
3
5
5
0.37
0.55
0.75
1.1
1.5
2.2
3.7
3.7
11.9
13.7
14.7
16.8
32.7
37.5
45.1
52.7
21.4
24.4
26.5
30.3
35.5
46.7
56.3
61.1
73.3
80.9
3.8 3.9
7.1
8.4
9.3
12.1
14.1
18.8
24.3
27.6
34.4
40.8
26.1
29.4
33.3
40.9
47.1
59.8
79.3
82.6
104.4
110.8
26.1
13.6
10.7
11.8
9.5
15.1
20.6
23.6
23.6
28.2
20.4
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
NOTES: Specifications subject to change without notice.
71/271/2
5.5
5.5
28.2
ATP 22-60 64.1 108.0 49.0 124.043.9 3.8 3.910 7.5
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1 1/2" NPT
1/23/4
11/2
4, 6
0 H
z, S
tain
less
Ste
el S
ubm
ersi
ble
Pum
ps
HEA
D IN
METERSH
EAD
IN F
EET
CAPACITY IN GPM
CAPACITY IN M /H3
Operational Range
Motor Dimensions in inches Weight in lbsPump Model [KW][HP] A B C Pump End Pump+Motor
Disch.Size D E
DIMENSIONS AND WEIGHTS
-
4, 6
0 H
z, S
tain
less
Ste
el S
ubm
ersi
ble
Pum
ps
Specifications subject to change without notice.4 motor standard, 3450 RPM.
Performance conforms to ISO 9906 Annex A.
7
2
ATP Submersible PumpsATP
ATP 35-2ATP 35-4ATP 35-5ATP 35-7ATP 35-9ATP 35-12ATP 35-16ATP 35-20ATP 35-26ATP 35-31
1
2
3
5
5
0.37
0.55
0.75
1.1
1.5
2.2
3.7
3.7
2" NPT 10.0
11.9
12.8
14.7
23.3
27.0
32.7
37.5
19.5
22.6
24.6
28.3
31.0
40.1
46.9
50.6
60.9
65.7
3.8 3.9
5.7
7.1
7.7
9.3
10.8
12.8
16.6
18.6
24.3
28.0
24.7
28.1
31.7
37.3
43.8
53.8
71.6
73.6
94.3
98.0
19.5
13.6
10.7
11.8
9.5
15.1
20.6
23.6
23.6
28.2
15.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
NOTES: Specifications subject to change without notice.
71/271/2
5.5
5.5
28.2
ATP 35-36 42.2 86.1 31.5 106.543.9 3.8 3.910 7.5ATP 35-41 47.0 90.9 36.0 111.043.9 3.8 3.910 7.5
2" NPT
2" NPT
2" NPT
2" NPT
2" NPT
2" NPT
2" NPT
2" NPT
2" NPT
2" NPT
2" NPT
1/23/4
11/2
4, 60 Hz, Stainless Steel Subm
ersible Pumps
HEA
D IN
METERSH
EAD
IN F
EET
CAPACITY IN GPM
CAPACITY IN M /H3
Operational Range
Motor Dimensions in inches Weight in lbsPump Model [KW][HP] A B C Pump End Pump+Motor
Disch.Size D E
DIMENSIONS AND WEIGHTS
4, 6
0 H
z, S
tain
less
Ste
el S
ubm
ersi
ble
Pum
ps
-
4, 60 Hz, Stainless Steel Subm
ersible Pumps
ATP Submersible PumpsType ATP 60
Specifications subject to change without notice.4 motor standard, 3450 RPM.
Performance conforms to ISO 9906 Annex A.
8
ATP 60-4ATP 60-5ATP 60-7ATP 60-9ATP 60-13ATP 60-18
3
5
5
71/210
1.5
2.2
3.7
3.7
5.5
7.5
2" NPT 14.5
16.0
19.0
22.0
29.6
36.6
42.6
45.6
56.3
79.6
3.8 3.9
7.7
8.6
10.6
12.4
16.1
20.7
40.7
49.6
65.6
67.4
86.1
95.7
2
35.7
23.6
20.6
23.6
15.1
28.2
43.9
28.1
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
3.8 3.9
NOTES: Specifications subject to change without notice.
2
2" NPT
2" NPT
2" NPT
2" NPT
2" NPT
HEA
D IN
METERSH
EAD
IN F
EET
CAPACITY IN GPM
4, 6
0 H
z, S
tain
less
Ste
el S
ubm
ersi
ble
Pum
ps
CAPACITY IN M /H3
Operational Range
Motor Dimensions in inches Weight in lbsPump Model [KW][HP] A B C Pump End Pump+Motor
Disch.Size D E
DIMENSIONS AND WEIGHTS
6, 60 Hz, Stainless Steel Subm
ersible Pumps
-
ATP Submersible PumpsType ATP 150
Specifications subject to change without notice. Performance conforms to ISO 9906 Annex A.
9
- 3 5 HP
- 4 7.5 HP
- 6 10 HP- 5 7.5 HP
- 7 10 HP
- 8 15 HP
- 9 15 HP
- 10 15 HP
- 11 20 HP
- 12 20 HP
- 13 20 HP
- 14 20 HP
- 15 25 HP- 16 25 HP
- 17 25 HP
0 3 6 9 12 15 18 21 24 27 30 33 36 39 42
0
20
180
40
60
80
100
120
140
160
200
220
240
260
280
300
E: maximum diameter including cable guard (Direct start)E*: maximum diameter including two cable guards (Star Delta start)NOTE. Specifications subject to change
ATP150-3ATP150-4ATP150-5
ATP150-6ATP150-7ATP150-8ATP150-9ATP150-10ATP85-11
ATP150-12ATP85-13ATP150-14
3.7
5.5
5.5
7.5
7.5
11
11
11
2,20
15
3,00
15
5.0
7.5
7.5
10
10
15
15
15
3,00
20
4,00
20
24.65
28.19
31.73
35.28
38.82
42.32
45.91
15,90
52.99
-
60.08
21.11
24.20
24.20
25.40
25.40
28.00
28.00
28.00
9,50
30.60
11,80
30.60
44.01
48.85
52.39
57.13
60.68
66.82
70.32
73.91
5,60
83.59
7,20
90.68
5.44
5.44
5.44
5.44
5.44
5.44
5.44
5.44
2840
5.44
2865
5.44
5.47
5.47
5.47
5.47
5.47
5.47
5.47
5.47
1506
5.47
1796
5.47
460
-
5.59
5.59
5.59
5.59
5.59
5.59
5.59
5.59
356
423
ATP150-15ATP150-16ATP85-20
18.5
18.5
1,50
25
25
2,00
63.62
67.17
9,50
33.10
33.10
5,70
96.72
100.27
3,30
5.44
5.44
2900
5.47
5.47
928
5.59
356
72.3
327
ATP150-11
ATP150-13
15
15
20
20
49.45
56.54
30.60
30.60
80.05
87.14
5.44
5.44
5.47
5.47
5.59
5.59
5.59
5.59
ATP150-17 18.5 25 71.50 33.10 104.60 5.44 5.475.59
5.59
26.7
22.8
35.1
30.8
43.2
39.0
51.6
47.4
60.0
55.8
68.1
63.9
76.5
83.1
134.7
123.8
151.1
138.8
171.3
155.0
180.6
176.4
205.0
200.8
213.1
208.9
232.5
228.3
239.1
22.90
C
A
B
D
E NPT 3
HEA
D IN
METERSH
EAD
IN F
EET
CAPACITY IN GPM
CAPACITY IN M /H3
6, 60 Hz, Stainless Steel Subm
ersible Pumps
Motor Dimensions in inches Weight in lbsPump Model [KW][HP] A B Pump End Pump+Motor
Disch.Size D E
DIMENSIONS AND WEIGHTS
C E*
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
without notice
6, 6
0 H
z, S
tain
less
Ste
el S
ubm
ersi
ble
Pum
ps
-
ATP Submersible PumpsType ATP 230
Specifications subject to change without notice. Performance conforms to ISO 9906 Annex A.
10
0 3 6 9 12 15 18 21 24 27 30 33 36 39 42
0
20
180
40
60
80
100
120
140
160
200
220
240
260
280
300
-4 15 HP
-1 5 HP
-2 7.5 HP
-3 10 HP
-5 20 HP
-6 20 HP
-7 25 HP
-8 25 HP
-9 30 HP
-10 40 HP
-11 40 HP
-12 40 HP
-13 40 HP
-14 50 HP
-15 50 HP
-16 50 HP
45 48 51 54 57 60 63 66 69
E: maximum diameter including cable guard (Direct start)E*: maximum diameter including two cable guards (Star Delta start)NOTE. Specifications subject to change
ATP230-1ATP230-2ATP230-3ATP230-4ATP230-5ATP230-6ATP230-7ATP230-8ATP230-9ATP230-10ATP85-11
ATP230-12ATP85-13ATP230-14
3.7
7.5
11
15
15
18.5
18.5
22
30
2,20
30
3,00
37
5
7.5
10
15
20
20
25
25
30
40
3,00
40
4,00
50
27.83
32.17
36.50
40.83
45.16
49.49
53.82
15,90
62.48
-
71.14
14.84
19.17
23.50
30.60
30.60
33.10
33.10
35.70
40.80
9,50
40.80
11,80
55.30
37.74
43.39
48.90
55.83
62.77
67.10
73.93
78.26
85.42
94.62
5,60
103.28
7,20
126.46
5.44
5.44
5.44
5.44
5.44
5.44
5.44
5.44
5.44
5.44
2840
5.44
2865
5.44
5.47
5.47
5.47
5.47
5.47
5.47
5.47
5.47
5.47
5.47
1506
5.47
1796
5.47
460
-
5.59
5.59
5.59
5.59
5.59
5.59
5.59
5.59
5.59
5.59
356
423
ATP230-15ATP230-16
37
37
50
50
75.47
80.59
55.30
55.30
130.79
135.89
5.44
5.44
5.47
5.47
5.59 89.5
ATP230-11
ATP230-13
30
30
40
40
58.15
66.81
40.80
40.80
98.95
107.61
5.44
5.44
5.47
5.47
5.59
5.59
5.59
5.59
5.59
21.2
15.9
31.8
26.5
42.1
37.0
52.7
47.4
63.3
58.0
73.6
68.3
84.2
78.9
97.2
129.1
116.9
160.7
142.4
187.1
182.0
208.6
203.4
265.2
231.9
275.6
270.3
384.2
280.9
397.2
389.5
22.90
24.20
25.40
5.5
28.00
C
A
B
D
E NPT 3
CAPACITY IN GPM
HEA
D IN
FEE
TH
EAD
IN M
ETERS
CAPACITY IN M /H3
6, 6
0 H
z, S
tain
less
Ste
el S
ubm
ersi
ble
Pum
ps
Motor Dimensions in inches Weight in lbsPump Model [KW][HP] A B Pump End Pump+Motor
Disch.Size D E
DIMENSIONS AND WEIGHTS
C E*
3 NPT3 NPT3 NPT3 NPT3 NPT3 NPT3 NPT3 NPT3 NPT3 NPT
3 NPT3 NPT3 NPT3 NPT3 NPT3 NPT3 NPT
without notice
6, 60 Hz, Stainless Steel Subm
ersible Pumps
-
ATP Submersible PumpsType ATP 300
Specifications subject to change without notice. Performance conforms to ISO 9906 Annex A.
11
0 3 6 9 12 15 18 21 24 27 30 33 36 39 42
0
20
180
40
60
80
100
120
140
160
200
220
240
260-13 60 HP
-1 5 HP
-2 10 HP
-3 15 HP
-4 20 HP
-5 25 HP
-6 30 HP
-7 40 HP
-8 40 HP
-9 40 HP
-10 50 HP
-11 50 HP
-12 60 HP
45 48 51 54 57 60 63 66 69 72 75 78 81 84 87 90
E: maximum diameter including cable guard (Direct start)E*: maximum diameter including two cable guards (Star Delta start)NOTE. Specifications subject to change
ATP300-1ATP300-2ATP300-3ATP300-4ATP300-5ATP300-6ATP300-7ATP300-8ATP300-9ATP300-10ATP85-11ATP300-12ATP85-13
3.7
11
15
18,5
22
30
30
30
37
2,20
45
3,00
5
10
15
20
25
30
40
40
40
50
3,00
60
4,00
30.51
35.43
40.35
45.28
50.20
55.12
60.04
15,90
69.88
-
15.75
20.67
23.62
30.60
33.10
35.70
40.80
40.80
40.80
55.30
9,50
61.30
11,80
38.65
46.07
51.62
61.11
68.53
76.05
86.08
91.00
95.92
115.34
5,60
131.18
7,20
5.44
5.44
5.44
5.44
5.44
5.44
5.44
5.44
5.44
5.44
2840
5.44
2865
5.47
5.47
5.47
5.47
5.47
5.47
5.47
5.47
5.47
5.47
1506
5.47
1796
460
-
5.59
5.59
5.59
5.59
5.59
5.59
5.59
5.59
5.59
5.59
356
423
ATP300-11
ATP300-13
37
45
50
60
64.96
74.80
55.30
61.30
120.26
136.10
5.44
5.44
5.47
5.47
5.59
5.59
5.59
22.1
16.1
33.7
27.8
45.4
39.5
57.1
51.1
68.8
62.8
80.4
74.5
86.2
138.0
117.1
178.7
156.8
219.4
195.5
259.1
253.2
368.8
264.8
410.5
374.5
416.2
22.90
25.40
28.00
7.5
C
A
B
D
E NPT 3
HEA
D IN
METERSH
EAD
IN F
EET
CAPACITY IN GPM
CAPACITY IN M /H3
6, 60 Hz, Stainless Steel Subm
ersible Pumps
Motor Dimensions in inches Weight in lbsPump Model [KW][HP] A B Pump End Pump+Motor
Disch.Size D E
DIMENSIONS AND WEIGHTS
C E*
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
3 NPT
without notice
-
The original goal of American Turbine was to design and manufacture energy ecient turbine pumps. As a result of our experience, we produce a quality line of pumping equip-ment that is accompanied by responsive service, strong technical support, and prompt delivery schedules. This combination, in turn, allows our customers to be highly competitive in their respective markets.
American Turbine supplies pumps to diversi-ed markets around the world. American Turbine has manufacturing facilities in Lubbock, Texas, Houston, Texas and Fresno, California.
American Turbine also maintains a network of worldwide representatives to provide our customers with the type of service they expect.
Developing and implementing new technol-ogy is the driving force behind our success within the pump industry. Through develop-mental engineering, in conjuction with our in-house testing and pattern making facilities, American Turbine is an aggressive leader in unique pumping applications.
Our dedication to customer satisfaction is unparalleled. We will not, at any time, compro-mise the standards of quality expected by our customers. Therefore, our customers receive only the most reliable product available.
Worldwide Availability & Service
4229 Adrian StreetLubbock, Texas 79415(806) 747-3248(800) 858-4517FAX (806) 747-4239
General Email (all locations): [email protected]
5727 Luce StreetHouston, Texas 77087(713) 641-6818(800) 231-0590FAX (713) 641-4569
3711 S. Bagley #109Fresno, California 93725(559) 486-7867(800) 435-7867FAX (559) 486-2341
Distributed By:Website: americanturbine.net