stampin’ anonymous

Stampin’ Anonymous November 2018 Tutorials

!

Thank you for your purchase! I hope that you enjoy the fabulous “better than flat” projects that my

fellow demonstrators and I have created for you this month. I appreciate your loyalty! Please remember

that these special tutorials are for you, and I do kindly ask that you not share them. If you’d like to share

an idea, please alter the project to make it your own and share it in your own words OR direct others to

where they can access the tutorial from me. The demonstrators that made these tutorials put a lot of work

into what they created. Your understanding is appreciated.

If I can answer any questions or help you with online ordering, please don’t hesitate to call me. I want to

give you the BEST service I can!

Craft Luv & Create Happiness!

Wendy Cranford

Stampin' Up!® Demonstrator

209-612-4056

[email protected]

www.luvinstampin.com

Stampin’ Anonymous Tutorials ©Stampin’ UP!

mailto:[email protected]

http://www.luvinstampin.com

Christmas Treat Bag

�


Supply List:

• 148478 Farmhouse Christmas Stamp Set • 149941 Farmhouse Christmas Bundle • 147050 Poppy Parade Stamp Pad • 147809 Santa’s Workshop Designer Series Paper • 119793 Poppy Parade Cardstock • 100730 Whisper White Cardstock • 147811 Santa’s Workshop Enamel Shapes • 147813 Poppy Parade Textured Weave Ribbon • 147806 Galvanized Clips • 141704 Gusseted 3 x 6 Cellophane Bags • 145372 Stitched Shapes Framelits Dies • 147922 Farmhouse Framelits Dies • 141708 Layering Squares Framelits Dies • 146320 Detailed Trio Punch • 126189 Paper Piercing Tool • 138995 Tear & Tape Adhesive • 104332 Snail Adhesive • 103683 Mini Glue Dots • 104430 Stampin Dimensionals • 122334 Simply Scored • 143263 Big Shot • 130658 Magnetic Platform

Project Details:

• Poppy Parade Cardstock o 4” x 11” o Scrap for die-cutting scallop square

• Santa’s Workshop Designer Series Paper o 1-1/4” x 3-3/4” o 3-3/4” x 3-3/4”

• Whisper White Cardstock o 5-1/2” x 4-1/4” - or scraps to stamp image twice

Instructions:


1. Score the 4 x 11 piece of Poppy Parade card stock at 1-1/2, 5-1/2, 6-1/4, & on the

11” side (landscape side).

2. Fold and burnish on score lines. Create a “mountain” fold on the 6-1/4” score line.

!

3. Round the corners of the top section of the Treat Bag using the Detailed Trio

Punch. Round edges on one side of the Santa’s Workshop Designer Series Paper

that measures 1-1/4 x 3-3/4. Add both pieces of Designer Series Paper using Snail

Adhesive.

4. Place candy in 3 x 6 cellophane bag. Fold over bag and staple closed (or use

adhesive). I used a Galvanized Clip to keep the cellophane bag inside the

Christmas Bag … you could use adhesive (Tear & Tape).

5. Tie a bow with the Poppy Parade Textured Weave Ribbon and add to Galvanized

Clip with a Mini Glue Dot.

!


6. Stamp the greeting twice with Poppy Parade ink on Whisper White card stock.

Cut the first image out with the Stitched Shapes Framelits. Cut the center piece out

using the Farmhouse Christmas Framelits. Cut out a Poppy Parade Scallop Square

using the Layering Squares Framelits. Assemble layers by add Merry Christmas

with Dimensionals, add square to Poppy Parade with Snail Adhesive and add to top

of bag with Tear & Tape.

7. Add the Enamel bow by cutting small pieces of a Stampin Dimensional.


Candy Cane Season Treat Bag

�


Supply List:

• 149927 Candy Cane Season Bundle • 147090 Old Olive Stampin’ Pad • 147084 Real Red Stampin’ Pad • 100730 Whisper White Cardstock • 100702 Old Olive Cardstock • 146921 Under the Mistletoe Designer Series Paper • 141705 Layering Circles Framelits • 146821 Spot of Tea Framelits • 143659 Bouquet Bunch Framelits • 138299 1 1/2” Circle Punch • 122334 Simply Scored Scoring Tool • 134365 1/8” Handheld Circle • 138995 Tear & Tape Adhesive • 104332 Snail Adhesive • 104430 Stampin’ Dimensionals • 102300 Bone Folder • 143263 Big Shot • 126199 Stampin’ Pierce Mat • 146925 Real Red 3/8” Cotton Ribbon • 104199 Linen Thread • 146924 Red Rhinestones

Project Details:

• Under the Mistletoe Designer Series Paper o 4” x 6” scored landscape at 2, 2 ¾, 4 ¾ and 5 ½” rotate 90 degrees and score

at ¾” o Scrap for 1/2” Circle Punch

• Whisper White Cardstock o 2 ¼ x 3” for stamping and punching candy cane – use the scrap to stamp and

fussy cut the holly and die cut the tag o 2 ½” square for die cutting the scallop circle from Spot of Tea

• Old Olive Cardstock o 2 ½” square for die cutting the Layering Circle Framelit

Instructions:


1. Cut and score your Under the Mistletoe Designer Series Paper and assemble your

bag. Black line – score, Red line – cut, Blue line – adhesive

2. Punch two holes in the top of the bag about ½” in from each side and about ½”

from the top. Fill with candy. I used individual wrapped candy canes. Thread the

Real Red Cotton ribbon through the holes and tie a pretty bow.

3. Die cut the Whisper White with the Spot of Tea Framelits and the Old Olive with

the Layering Circles Framelits. Adhere the pieces together and adhere to the bag.

4. Punch Under the Mistletoe Designer Series Paper 1 ½” circle and adhere to the Old

Olive circle.

5. Stamp the candy cane with Real Red Ink and punch out. Set aside.

6. On the Whisper White scrap. Die cut the tag from Bouquet Bunch Framelits, then

stamp the holly and fussy cut.

7. Stamp the “for you!” greeting in Old Olive ink on the bitty little tag. Tie tag to set

aside candy cane.

8. Adhere candy cane with Stampin’ Dimensionals. Decorate tag with stamped holly

and Red Rhinestones.

Santa Notepad Holder


�

Supply List:


• 147690 Signs of Santa stamp set• 132708 Memento Tuxedo Black ink • 146990 Granny Apple Green card stock• 140272 Whisper White thick card stock• 147690 Santa's Workshop designer series paper• 146920 Granny Apple Green 1/2” Textured Weave ribbon• 147274 Granny Apple Green Stampin' Blends combo pack• 147275 Poppy Parade Stampin' Blends combo pack• 147273 Soft Suede Stampin' Blends combo pack• 144601 Crumb Cake Stampin' Blends combo pack• 144605 Pool Party Stampin' Blends combo pack• 145058 Smoky Slate Stampin' Blends combo pack• 147280 Pineapple Punch Stampin' Blends combo pack• 138995 Tear & Tape adhesive • 104332 Snail adhesive • 126889 Stampin' Trimmer• 104430 Stampin' Dimensionals

Project Details:

• 146990 Granny Apple Green card stock o 6” x 8 1/4” o 6 1/2”x 8 1/4”o 3 3/4” x 6”

• 140272 Whisper White thick card stocko 4” x 6 1/4” o 3”x 5 1/4”

• 147690 Santa's Workshop designer series papero 5 3/4” x 8” (stripes)o 3 1/2” x 5 3/4” (dots)

Instructions:

1. Please note that this fits any 6” x 8” size notepad. Other options would be to add pockets inside and put items in as gifts.


2. After cutting all your pieces as listed above start by scoring the largest sheet of Granny Apple Green card stock (6 1/2” x 8 1/4”). Score on the long side at 1/4” and 1/2”. This creates the tabs for folding around the back of the notepad.

3. Add Tear & Tape adhesive to the 1/4” tab. This tab will adhere to the back of the other Granny Apple Green card stock piece (6” x 8 1/4”). See image below.

�

4. After adhering the two large pieces together, use Tear & Tape on the back of the notepad to adhere it to the right side of the notepad cover. Close the cover.

5. Adhere the striped piece of designer series paper to the front of the notepad.

6. Use a long piece of Granny Apple Green Textured Weave ribbon and wrap it around the back and front leaving plenty of tail space on each side. Tie a bow.

7. Use Stampin' Dimensionals to add the 4” x 6 1/4” piece of Whisper White thick card stock.

8. Use Snail Adhesive to add 3 3/4” x 6” piece of Granny Apple Green card stock, making sure to center it over the Whisper White.

9. Use Snail Adhesive to add the dotted piece of designer series paper. Last, do all the stamping and coloring on the remaining piece of Whisper White thick card stock. As an option you can stamp them directly on the card


stock or you can stamp them on a scrap and then hand cut them out and pop them up with Dimensionals. After coloring add to the notepad cover.

�

Christmas Holiday Planner


�

Supply List:


• 149967 Signs of Santa Bundle • 147050 Poppy Parade ink • 147809 Santa’s Workshop Specialty DSP • 146969 Call Me Clover Cardstock • 119793 Poppy Parade Cardstock • 100730 Whisper White Cardstock • 146960 Silver Glimmer Paper • 147905 Santa’s Workshop Memories & More Card Pack • 147813 Poppy Parade ½” Textured Weave Ribbon • 141705 Layering Circles Framelits • 119850 1-3/4” Circle Punch • 133782 2” Circle Punch • 143717 Starburst Punch • 143263 Big Shot • 122334 Simply Scored Scoring Tool • 133751 Dazzling Diamonds Stampin’ Glitter • 102300 Bone Folder • 138995 Tear & Tape Adhesive • 104430 Stampin’ Dimensionals • 104332 SNAIL Adhesive • 110755 Multipurpose Liquid Glue • **Notepad (8-1/8” x 5) & Pen from office supply store • **Cardboard (cut from Stampin’ Up! shipping box)

Project Details:

• 146969 Call Me Clover Cardstock o 7” x 9” o 7” x 8-1/8” o 3” x 4” o Scrap for punching three 1-3/4” circles

• 100730 Whisper White Cardstock o 4-1/2” x 6-1/2” o 2” x 2” o Scrap for punching a 2” circle

• 119793 Poppy Parade Cardstock o Scrap for using Starburst punch

• 146960 Silver Glimmer Paper o Scrap for die-cutting scallop circle

• 147809 Santa’s Workshop Specialty DSP


o 5” x 9” (Candy Cane design) o 4”x 6” (Flocked diagonal design) o ¾” x 8-1/8” (Flocked diagonal design) o 1-3/4” x 12” (2 pieces – Swiss Dot polka dot design)

• Cardboard o 8-1/8” x 6”

Instructions:

1. Place the cardboard base in the center of 7” x 9” piece of Call Me Clover

Cardstock.

2. Use stylus from scoring board and run along all 4 sides.

3. Place Tear & Tape Adhesive on all 4 sides on cardstock – just the length of

cardboard.

4. Cut the corners off leaving approximately 1/8” from corner of cardboard.

5. Remove backing strip off and adhere cardstock to cardboard.

6. Place 7” x 8-1/8” piece of Call Me Clover on Simply Scored Scoring Tool

7. On 7” side, score at ½”, 1-1/2” & 2”.

8. Fold ½” strip backwards & burnish with Bone Folder. Adhere with Tear & Tape

Adhesive.

9. Fold 2” & burnish score line.

10.Place pen on 1-1/2” & 2” section & use pencil to make two tick marks to create

pen holder.

11.Use scissors to cut up to 2” score line.

12.Fold 1-1/2” & 2” score lines opposite, making sure pen holder pops out to hold the

pen.

13.Place Tear & Tape Adhesive on the ½” & 1-1/2” sections (avoiding slits) and

adhere to covered cardboard base.

14.Cover note pad with 5” x 9” candy cane DSP using Tear & Tape Adhesive

15.**Tip: hold note pad on end and line up DSP from bottom of pad and wrap DSP

around top and back.

16.Cover back side of note pad with Tear & Tape Adhesive and place inside cover.


!

17.Adhere a 6” x 4” card from Santa’s Workshop Memories & More Card Pack to

front of DSP.

!

18.Score glitter polka dot 4” x 6” card a ½” on three sides.

19.Place Tear & Tape Adhesive on the front side of three sides.

20.Cut off the bottom two corners leaving 1/8”.


21.Fold backwards and remove backing paper to create pocket.

22.Adhere to left side of inside cover flush to bottom left corner.

23.Decorate pocket with Poppy Parade Starburst.

24.Adhere 2” Whisper White & 1-3/4” Call Me Clover circles on top of starburst.

25.Stamp “official seal” using Poppy Parade ink and die cut using coordinating.

framelit. Use Stampin’ Dimensionals to adhere on top of circles.

26.Adhere 6-1/2” x 4-1/2” Whisper White cardstock to front of cover.

27.Adhere 4” x 6” diagonal DSP to Whisper White cardstock.

28.Adhere 3”x 4” Call Me Clover Cardstock on top.

29.Score 1-3/4” x 12” DSP strips every ½”.

30.Fold DSP back & forth and connect both pieces together to create a rosette.

31.Gather and press the rosette together. Place a punched Whisper White circle on the

backside of rosette using a hot glue gun.

32.Using finger, place Multipurpose Glue around the edge of rosette and dip it in

Dazzling Diamonds.

33.Die cut Santa, Mrs. Claus from DSP and scallop circle using Glimmer Paper.

34.Adhere scallop circle to center of rosette.

35.Adhere Call Me Clover 1-3/4” circle on top.

36.Place Santa & Mrs. Claus on top using SNAIL Adhesive & Stampin’

Dimensionals.

!

37.Tie a bow using Poppy Parade ribbon and adhere to bottom of die cuts.

38.Place ¾” DSP on section with pen holder. Use pencil to make two tick marks and

cut out around pen holder section. Adhere using Multipurpose Glue.


Chocolate Nugget Holder

!

Supply List:

• 147692 Candy Cane Season stamp set • 148011 Candy Cane Builder punch • 149927 Candy Cane Season Bundle • 147050 Poppy Parade classic ink • 119793 Poppy Parade card stock • 100730 Whisper White card stock


• 147809 Santa’s Workshop designer paper • 144628 Acetate Card Boxes • 147813 Poppy Parade ½” Textured Weave Ribbon • 138299 1 ½” Circle punch • 119850 1 ¾” Circle punch • 104332 Snail Adhesive • 138309 Fine-Tip Glue pen • 104430 Stampin’ Dimensionals • 144108 Mini Stampin’ Dimensionals • 103683 Mini Glue Dots • 133751 Dazzling Diamonds Glitter • Velcro (local store) • Hershey’s Chocolate Nuggets (9) (local store)

Project Details:

• Poppy Parade card stock o Cut at 4 3/8” x 5 5/8” o Cut at 1 5/8” x 2 5/8” (tag) o Scrap for punching 1-3/4” circle

• Whisper White card stock o Cut at 1 ½ ” x 2 ½” (tag) o Scrap for stamping and punching 1-1/2” circle o Scrap for stamping and cutting greeting

• Santa’s Workshop designer paper o Cut at 1 ¾” x 4 ¼”

Instructions:

1. Cut the Acetate Card Boxes in half at about 3” with scissors.

2. Cut Poppy Parade card stock at 4 3/8” x 5 5/8”. On the 5 5/8” side across the top

score at 3” and 3 5/8”

3. Cut Santa’s Workshop designer paper at 1 ¾” x 4 ¼” & adhere to the smaller 2”

section of the 4 3/8” x 5 5/8” Poppy Parade card stock. (The 3” side of Poppy

Parade card stock will be sliding into your clear box and the smaller flap (2”) will

be folded over the front of the clear box.)

4. You may add Snail adhesive to the backside of the Poppy Parade (3” side) and

adhere to the inside back of the clear box. The candy/gift will be in front of the


Poppy Parade showing through the clear box. This clear box can hold many types

of candy, even gift cards, cash, & lottery tickets. Inside the sample there are (9)

pieces of Hershey Chocolate Nuggets, you can add less if you’d like.

5. Stamp the Ho Ho Ho greeting from the Candy Cane Season stamp set with Poppy

Parade ink onto the Whisper White 1 ½” x 2 ½” piece, stamping off on scrap paper

to make it a lighter shade of Poppy Parade ink.

6. Layer this whisper white piece onto Poppy Parade card stock cut at 1 5/8” x 2 5/8.”

7. Stamp the Candy Canes on Whisper White scrap with Poppy Parade classic ink

and punch out with the 1 ½” Circle punch. Layer that onto Poppy Parade card

stock scrap punched out with the 1 ¾” circle punch. Pop up the candy canes onto

the Ho Ho Ho tag with Stampin’ Dimensionals.

8. Stamp the Tis the SWEET Season with Poppy Parade classic ink onto Whisper

White scrap card stock. Cut the greeting at ¼” x 2 3/8”. Position the greeting under

the candy canes with (2) Mini Dimensionals.

9. Make a bow with the Poppy Parade ½” Textured Weave Ribbon & adhere to the

tag with the Mini Glue Dots.

10.Using the Fine Tip Glue pen add glue to the candy canes and sprinkle Dazzling

Diamonds Glitter over the glue to add sparkle to your sweet candy holder.

11.Optional: Add a small piece of Velcro to secure the candy holder front flap closed

and to keep candy from falling out.

!


Step Panel Holiday Photo Card

�


Supply List:

• 147702 Merry Christmas To All Stamp Set • 147112 Merry Merlot Classic Ink • 147816 Joyous Noel Designer Series Paper • 146979 Merry Merlot Cardstock • 121043 Sahara Sand Cardstock • 121045 Basic Black Cardstock (optional) • 147817 Joyous Noel Glimmer Paper • 147818 Merry Merlot & Copper Reversible Ribbon • 144219 Pearl Basic Jewels • 126889 Stampin’ Trimmer • 103579 Paper Snips • 143263 Big Shot • 147902 Blizzard Thinlits Die • 144262 Big Shot Die Brush (optional but helpful) • 133782 2” Circle Punch • 144106 Multipurpose Adhesive Sheets • 138995 Tear & Tape Adhesive • 104430 Dimensionals (optional – only used on second version of card) • 104332 Snail Adhesive • 103683 Glue Dots

Project Details:

• Merry Merlot Cardstock o 4-14” x 8-1/2” scored at ½”, 1-1/2”, 3” and 4” o 2-1/2” x 4-1/4” scored at ½” and 1-1/2”

• Sahara Sand Cardstock o Scrap for stamping and punching 2” circle o ½” x 4”

• Joyous Noel Designer Series Paper o 2-7/8” x 4” (Merry Merlot snowflake pattern) o 4” x 4-1/4” (Merry Merlot stripes pattern)

• Basic Black Cardstock (optional) o 2-1/4” x 2-1/2” for photo mat or just replace with photo

• Joyous Noel Glimmer Paper (Copper)


o 5/8” x 4” o Scraps for die-cutting snowflakes

• Merry Merlot & Copper Reversible Ribbon o 16”

Instructions:

1. Put Tear & Tape Adhesive along the edge of the 4-14” x 8-1/2” and 2-1/2” x 4-1/4”

Merry Merlot Cardstock pieces just before the ½” score lines.

2. Flip the 2-1/2” x 4-1/4” piece over and add a couple strips of Tear & Tape near the

other end as shown.

!

9. Fold the 4-14” x 8-1/2” inward on each score line. Flatten the cardstock back out,

and this time just fold at the 3” score line. Hold the card closed, remove the

backing on the Tear & Tape, then tuck that ½” end under and attach. Release the

card from the flattened position, and allow the folds to come back so that the base

of the card creates a “step.”

10.Stamp the sentiment on the Sahara Sand Strip. Attach this to the Glimmer Paper

Strip using Glue Dots. Attach this about a ¼” from the top of the snowflake

patterned designer paper using SNAIL. Then attach this with SNAIL to the top

portion of the card as shown below.

11.Attach the smaller 2-1/2” x 4-1/4” Merry Merlot Cardstock piece to the front by

flattening the card out again the same way you flattened it before. (You should be

able to see the whole designer paper piece that you just added.) Then fold over the

½” section of that 2-1/2” x 4-1/4” piece so that the Tear & Tape is all showing on

one side, remove the backings. And stick onto the flattened card so that the ½”

section is towards the top and the other end is flush with the bottom crease on the


flattened card as shown here in this second photo. (This is how your card will

flatten when you want to put it into an envelope.)

! !

12.Allow the card to pop up so you can see how it will stand on its own. Then

decorate the “step panels.” You may want to flatten the card back down when

attaching and tying on pieces, though.

13.Add the 2-1/4” x 2-1/2” Basic Black cardstock for a photo mat with SNAIL. Or

just attach a photo that size in the front area.

14.Wrap the ribbon around the top “step” and tie into a bow to give that “step panel”

the appearance of a gift.

15.Tape on the 4” x 4-1/4” striped pattern paper to the backside of the card.

16.Stamp the other sentiment on the Sahara Sand scrap and punch out with the 2”

Circle Punch.

17.Add Multipurpose Adhesive behind the Copper Glimmer Paper scraps, then die-cut

several snowflakes from the Blizzard Thinlits Die.

18.Attach these snowflakes and some pearls to the front and the back of your card to

embellish.

!


!

19.If you want to use a larger photo, switch the sizes of your Basic Black cardstock

(or photo) and your striped designer paper to get this look instead. You can sign

your card within the circle sentiment piece that is popped up off the photo with a

Dimensional.

� �


stampin’ anonymous

Documents