standalone exit alarms eax300 battery powered door … · • adjustable surface strike bracket for...
TRANSCRIPT
© 2020 - 2021
DETEXSTANDALONE EXIT ALARMS
EAX300 BATTERY POWERED DOOR PROPPED ALARM
D
27
EAX500 STANDALONE BATTERY POWERED EXIT ALARM
PART #
086334
• Self-contained door alarm with 100 dB piezo horn that sounds to warn unauthorized use of a door or gate
• Secure, tamper resistant housing
• Patented plastic template allows for foolproof alignment of internal magnetic door contact and accurate installation of unit
• Tapered cover allows for installation on narrow stile doors that are 2” minimum width
• Intelligent circuit senses the external magnet location automatically and sets the correct door handing
• Size: 7.7”H x 2.1”W x 2.375”D
• Patented cam assembly automatically adjusts for different sizes of cylinders without use of spacers
• Extended bypass allows alarm to remain bypassed when door is open and automatically rearm upon door closing
• 9VDC battery operated with low battery alert
• Has LED visual and audible arming indicators
• Field selectable 2-minute auto rearm, if desired
• Field selectable status indicators if desired
• Mortise cylinder with standard Yale cam required (sold separately)
• Accepts 1”, 1-1/8” & 1-1/4” cylinders
PART #
105341
The Detex EAX-300 series is designed for applications where doors may be used
for egress or ingress, but may not be held or propped open. Door open times from
1 second to 2 minutes (15 second default) are field selectable. The smaller size
makes installation quick and easy.
• Helps keep energy costs down by ensuring doors are closed
• Quick, easy installation saves time and money
• Alarm silences when door is closed, no waiting for key-holder to arrive
• Secure, tamper resistant housing
• Patented plastic template assures accurate installation by providing foolproof alignment with internal magnetic door contact
• Tapered cover allows for installation on narrow stile doors, 2” minimum
• Intelligent circuit senses the external magnet location automatically and sets the correct door handing
• 100 dB piezo alarm
• 9VDC battery operated with low battery alert
• LED visual arming indicators
• Size: 2.10”W x 7.7”H x 2.375”D
• Mortise cylinder with standard Yale cam required (sold separately)
• Accepts 1”, 1-1/8” & 1-1/4” cylinders
I 81
© 2020 - 2021
D
28
EXIT CONTROL LOCK
DETEXEXIT CONTROL LOCKS, ACCESSORIES & FIRE RATED EXIT CONTROL LOCKS
ECL600 FIRE RATED EXIT CONTROL LOCKS
DESCRIPTION PART #
English 065944
French 075868
• Fire rated and code-compliant relatching exit device
• Attack resistant design withstands over 2200 lbs of outside pull force
• Reduces internal and customer theft
• 1” throw saw resistant dead bolt & 3/4” latching bolt
• 100 decibel alarm, powered by 9-volt battery (included)
• Accepts 5-pin through 7-pin standard and interchangeable core rim cylinders
• Durable steel plate with photo luminescent sign absorbs light to “glow in the dark” when lights are dimmed
• Non-handed
• Locking and unlocking the dead bolt always arms and disarms the alarm
• Resetting the alarm can only be accomplished with a control key
DESCRIPTION PART #
9 Volt Conversion Kit 065219
Adjustable Surface Strike 003273
Standard Strike 026229
Cover Cam Lock for ECL230, EAX300 & EAX500 003268
ECL2111K• Siren/battery conversion kit - for ECL-230C & D
• Converts ECL-230 6 volt lantern battery to 9 volt battery & siren
ECL435K• Adjustable surface strike bracket for some double door applications where one
door is held closed with surface or flush bolts
• For use on left hand, right hand inswinging doors or double doors with one door stationary using flush bolts or DDH-2250
ECL437K• Adjustable surface strike for use with outswinging doors
PP5572• Cover lock, nut, and 2 keys
ACCESSORIES
DESCRIPTION PART #
English 003270
French 075089
• Attack resistant design withstands over 2200 lbs of outside pull force
• Reduces internal and customer theft
• Single point 1” throw saw resistant dead bolt
• 100 decibel alarm, powered by 9-volt battery (included)
• Accepts 5-pin through 7-pin standard and interchangeable core rim cylinders
• Durable steel plate with photo luminescent sign absorbs light to “glow in the dark” when lights are dimmed
• Non-handed
• Locking and unlocking the dead bolt always arms and disarms the alarm
• Resetting the alarm can only be accomplished with a control key
ECL2111K ECL435K
ECL437K PP5572
I 82
© 2020 - 2021
DETEXHINGE BOLTS, FIRE RATED ALARMED & DELAYED EGRESS EXIT DEVICES
V40 ALARMED & DELAYED EGRESS EXIT DEVICES
D
29
FUNCTION LANGUAGE PART #
Standard English 075079
Standard French 075803
Delayed Egress English 088434
Sticker in French French 075088
V40EB• Reduces internal and customer theft while meeting building code requirements
• Alarmed 100 decibel exit device powered by standard 9-volt battery
• Stainless steel, 3/4” deadlocking Pullman-type latch bolt
• Heavy-duty ribbed aluminum rail extrusion
• Fits 36” doors, (can be cut down in the field) 1-3/4” to 2-1/4” thick with minimum 2-1/2” stiles
• 1/8 turn of mortise cylinder provides dogging of the device
• Controls foot traffic, deters unauthorized exits, and prevents loss
• Heavy-duty angled end cap
• Accommodates all sizes of mortise cylinders with a standard Yale cam; collar is required for 7-pin IC cylinders
• Patented back plate and plastic strike locator provide paperless template for perfect alignment of unit on door and frame
• Field selectable key rearm or 2 minute auto rearm
• Visual and audible arming indicators status are field selectable
V40EE• All the features of the V40EB above with delayed egress
• Powered by regulated power supply that delivers a constant 24VDC of filtered and regulated voltage at a rated load of 1A
• Fire alarm input can be connected at power supply
• Remote signal output and remote bypass input standard
• Includes delayed egress panic bar, 24VDC filtered and regulated power supply, 3’ confuit loop and door sign that says “PUSH UNTIL ALARMS SOUNDS, DOOR CAN BE OPENED IN 15 SECONDS”
• 9V battery provides alarm function only in case of power failure
V40EB Alarmed Exit Device
V40EE Delayed Egress Bar
HINGE BOLTS
DESCRIPTION FINISH PART #
Single Hinge Bolt Grey 108133
Single Hinge Bolt Black 108134
Double Hinge Bolts Grey 108135
Double Hinge Bolts Black 108136
Triple Hinge Bolts Grey 108137
Triple Hinge Bolts Black 108138
• Provides hinge-side protection against break-ins
• Adds additional locking points, improving holding strength to slow down crowbar attacks
• Easy to install
• Can be added to almost any outswing door application
• Choose the right level of protection with kits of 1 bolt, 2 bolts or 3 bolts
• Kits include through-bolt mounting hardware
• One piece stainless construction provides superior holding strength
• Excellent for exterior application or that doors that get wet
I 83
© 2020 - 2021
DORMAFLOOR CLOSERS & DOOR HOLDERS
D
47
BTS80 FLOOR CLOSER
ELECTROMAGNETIC DOOR HOLDER
DESCRIPTION PART #
Long Catch 028943
Short Catch 028942
• Replacement body is 13-7/16"L x 2-3/8"D
• Cover not included
• Mechanical backcheck at approximately 70º
• Selectable delayed action between 175º and 75º
• Delayed action is functional when hold open is not engaged
• Selectable multipoint hold open between approximately 75º and 175º
• Adjustment for hold open between 75º and 105º
• Accommodates doors weighing up to 660 pounds and 4'-6" wide interior and 4'-0" exterior
• Closer adjustment in cement case provides lateral and longitudinal adjustment of 1/4" and height adjustment of 5/32"BTS80
SIZE PART #
2 036857
3 036858
2-5/8
4-5/8 1-3/4
7/82- 3/4
Door
Overall Projection: 3-1/2"
Door
2-7/16 2- 3/4
1-5/8
1-3/4 4-5/8
Overall Projection: 4-1/16"
EM504 24VAC
EM508 24VAC
• Dual voltage capability reduces stocking requirements
• Low current draw allows savings on power supplies and backup batteries
• Optional extension rods fit on standard catch plate to accommodate deeper door to wall conditions
• Low residual magnetism allows easy release of door
• All electrical values +10% to –15%.
• Floor & wall mounted styles
• Can be manually pulled from hold open position
• Silent operation
• Holding force 15–25 lbs nominal
• Can be manually pulled from hold open position with 25-40 maximum hold open force
• Voltage: 24 VAC/DC or 120 VAC
• Amps: .015
• Meets ADA requirements with minimal spring force door closers
• ANSI A156.15 Grade 1
• UL and cUL listed
• Finish: Satin chrome
EM504• Semi flush wall mount
• Overall projection: 3-1/2”
EM508• Surface wall mount
• Overall projection: 4-1/16”
EM508 24VAC
I 103
© 2020 - 2021
R
137
RCI4 SERIES ELECTRIC STRIKES
4 SERIES COMMERCIAL DUTY CENTRELINE ELECTRIC STRIKES
• Body only, faceplates sold separately
• ANSI-size faceplate: 1-1/4” x 4-7/8”
• Accommodates 3/4” latch projection (pullman design not included)
• Enlarged latch cavity width allows compatibility with cylindrical and centreline mortise locks (including 3-piece anti-friction type) and mortise exit devices
• 1-1/2” cut-out depth accommodates most aluminum and hollow metal frames
• Use with wide range of door thicknesses: 1-3/8” to 2-3/8”
• AC/DC input acceptable for all fail secure models
• Fully reversible for right or left-hand doors
• Standard mounting tabs and fasteners included
• Unique anti-vibration design prevents manipulation by vibration
• Finish: Stainless steel
• UL 1034 burglary resistant - highest level 1000 lbs of static strength
• Meets ANSI/BHMA A156.31 Grade 1
• Non-handed
DESCRIPTION PART #
12VAC/DC Body 036920
11-16VAC Body 084017
24VAC/DC Body 036921
4 SERIES FACEPLATES
FOR FRAME CORNERS PART #
4114 Hollow Metal Square 080950
4104 Aluminum Round 080949
4105 Aluminum/Wood Round 036930
4107 Aluminum Round 081393
4108 Aluminum/Wood Round 080955
B4714 - For 4114• Use with centreline exit devices, cylindrical or centreline mortise locks
• 1-1/4” x 4-7/8”
B4704 - For 4104• Use with aluminum, cylindrical or centreline mortise locks and centreline exit
devices
• 1-1/4” x 4-7/8”
B4705 - For 4105• Use with centreline exit devices, aluminum, cylindrical or centreline mortise locks
• 1-1/8” x 5-7/8”
B4707 - For 4107• Use with aluminum locks, cylindrical or centreline mortise locks and mortise exit
devices
• 1-1/4” x 6-7/8”
B4708 - For 4108• Use with aluminum locks, cylindrical or centreline mortise locks and centreline exit
devices
• 1-7/16” x 7-15/16”
B4714 B4705
B4708
B4704
B4707
I 305
© 2020 - 2021
R
138
RCIF4 & 7 SERIES ELECTRIC STRIKES
DESCRIPTION PART #
12VDC Body 046067
24VDC Body 046069
7 SERIES ADJUSTABLE ELECTRIC STRIKES
• For extra-strength in heavy-duty applications and is fire labeled
• Unique anti-vibration design prevents manipulation by vibration
• Crossed wires are never a problem as the coil is not polarity-conscious
• Accommodates 3/4” latch projection (pullman design not included)
• Enlarged latch cavity width allows compatibility with cylindrical, and centerline mortise locks (including 3-piece anti-friction type) and mortise exit devices
• 1-1/2” cut-out depth accommodates most aluminum and hollow metal frames
• Door thicknesses: 1-3/8” to 2-3/8”
• AC/DC input acceptable for all fail secure models
• Fully reversible for right or left-hand doors
• Standard mounting tabs and fasteners included
• ANSI/BHMA A156.31 Grade 1
• UL listed: UL 10C fire rated 1-1/2 hr
• UL 1034 burglary resistant - highest level 1,000 lbs static strength
• ANSI stainless steel faceplate: 1-1/4” x 4-7/8”
• Stainless steel finish
F4 SERIES FIRE RATED COMMERCIAL DUTY CENTRELINE ELECTRIC STRIKES
VOLTAGE PART #
12VDC 062845
24VDC 086438
• Body only, faceplates sold separately
• RCI’s 7 Series electric strikes allow installers to adjust the strike pivot horizontally for precise alignment
• Unique anti-vibration design prevents manipulation by vibration
• Crossed wires are never a problem, as the coil is non polarity-conscious
• Accommodates 5/8” latch projection (pullman design not included)
• Unique anti-vibration design prevents manipulation by vibration
• Enlarged latch cavity width allows compatibility with cylindrical, narrowline aluminum and centerline mortise locks (including 3-piece anti-friction type)
• 1-1/2” cut-out depth accommodates most aluminum and wood frames
• Door thicknesses: 1-3/8” to 2-3/8”
• AC/DC input acceptable for fail secure models
• Fail secure
• Non-handed
• Standard mounting tabs, fasteners, and trim plate included
• 1/8” horizontal adjustment
• UL listing: UL 1034 burglary resistant, 500 lbs of static strength
• Modular design
I 306
© 2020 - 2021
R
139
RCI7 SERIES ELECTRIC STRIKES FACEPLATES, JIG, & 5 SERIES ELECTRIC STRIKE
FINISH PART #
Aluminum 066332
4 & 7 SERIES FRAME PREP JIG
7 SERIES FACEPLATESB4714 - For 7114• Use with centreline exit devices, cylindrical or centreline mortise locks
• 1-1/4” x 4-7/8”
B4704 - For 7104• Use with aluminum, cylindrical or centreline mortise locks and centreline exit
devices
• 1-1/4” x 4-7/8”
B4705 - For 7105• Use with centreline exit devices, aluminum, cylindrical or centreline mortise locks
• 1-1/8” x 5-7/8”
B4707 - For 7107• Use with aluminum locks, cylindrical or centreline mortise locks and mortise exit
devices
• 1-1/4” x 6-7/8”
B4708 - For 7108• Use with aluminum locks, cylindrical or centreline mortise locks and centreline exit
devices
• 1-7/16” x 7-15/16”
B4714 B4705 B4708B4704 B4707
• Improves installation accuracy, and aids in cutting of aluminum or metal frames
• Frame prep jig for ANSI-sized electric strike
• For series 4104/4304, 4114/4314, 7104/7304, 7114/7314
FOR FRAME CORNERS PART #
7114 Hollow Metal Square 080950
7104 Aluminum Round 080949
7105 Aluminum/Wood Round 036930
7107 Aluminum Round 081393
7108 Aluminum/Wood Round 080955
5 SERIES
FINISH PART #
Aluminum 104294
I 307
© 2020 - 2021
RCI6 SERIES ELECTRIC STRIKES
6 SERIES HEAVY DUTY UNIVERSAL ELECTRIC STRIKES
6 SERIES UNIVERSAL STRIKE FACEPLATES
R
140
DESCRIPTION LATCH PROJECTION PART #
Low Profile Body 5/8” 080961
Standard Profile Body 3/4” 080962
LMKM Standard Profile Body 3/4” 080963
• Body only, faceplates sold separately
• Field selectable lock mode – choose fail secure or fail safe with the turn of a dial (fail secure mode requires DC voltage)
• Field selectable voltage input – accommodates 12 or 24VDC, and 12 to 24VAC, and even 16VAC in one strike
• Low profile version (L) is shallow enough for use with narrow stile aluminum frames only 1-1/16” deep, standard version (S) requires 1-3/16” frame depth
• 1/4” horizontal adjustment
• Modular “plug-in” wire connectors for fast hook-up
• Tested to over 1,000,000 cycles
• UL listed 1034 burglary resistant, 1500 lbs of static strength
• Modular “plug-in” wire connectors for fast hook-up
AS65LMKM• The latch monitor is a SPDT switch with a trigger located in the strike cavity to
indicate the presence of a latch bolt when the door is closed
• The keeper monitor is a SPDT switch that will indicate when the keeper moves from the closed (normal) position to the open position
• NOTE: LMKM switches are rated at 2 amps @ 24VDC
B614
B607 B608
B605B604
FOR FRAME CORNERS PART #
S6514/L6514 Hollow Metal Square 080957
S6504/L6504 Aluminum Round 080956
S6505/L6505 Aluminum/Wood Round 082651
S6507/L6507 Aluminum/Wood Round 082652
S6508/L6508 Aluminum/Wood Round 080958
B614 32D - For S6514-Standard/L6514-Low• Use wi th centreline exit devices, cylindrical or centreline mortise locks
• 1-1/4” x 4-7/8”
B604 32D - For S6504-Standard/L6504-Low• Use with aluminum, cylindrical or centreline mortise locks and centreline exit
devices
• 1-1/4” x 4-7/8”
B605 32D - For S6505-Standard/L6505-Low• Use with centreline exit devices, aluminum. cylindrical or centreline mortise locks
• 1-1/8” x 5-7/8”
B607 32D - For S6507-Standard/L6507-Low• Use with aluminum locks, cylundrical or centreline mortise locks and mortise exit
devices
• 1-1/4” x 6-7/8”
B608 32D - For S6508-Standard/L6508-Low• Use with aluminum locks, cylindrical or centreline exit devices
• 1-7/16” x 7-15/16”
I 308
© 2020 - 2021
R
141
RCIF2 SERIES FIRE RATED & 15 SERIES ECONOMY ELECTRIC STRIKES
F2 SERIES FIRE RATED COMMERCIAL DUTY CENTRELINE ELECTRIC STRIKES
• Modular design allows compatibility with most locks without having to order special faceplates
• Includes offset and centreline faceplates
• Adjustable deadbolt keeper and deadlatch ramp
• Heavy-duty stainless steel construction
• Fits HES 1006 (1003) frame cutout
• Accommodates 3/4” latch projection
• Faceplate and anti-tamper security screws included for centreline latch entry
• Unique sliding shim design for up to 1/8” (3mm) horizontal adjustment for misaligned frames
• Vertical adjustability of strike for precise positioning of lockset
• Accommodates up to 1” deadbolt; night-latch function only, bolt will not release
• Field selectable voltage input – accommodates 12 or 24VDC and 12 to 24VAC
• Hex and security driver bit included
• Low current draw (0.19 Amps @24VDC)
• “Cool Keeper” solenoid design prevents keeper from heating up
• Plug-in wire connector
• Trim plate included
• Non-handed
• UL 10C, 3 hour fire-rated (fail secure only)
• UL listing 1034, burglary resistant listed, 1500 lbs static strength
• Factory tested to meet ANSI/BHMA 156.31 for strength and endurance
• Non fire-rated version (fail safe) available by special order: Model# 2364
15 SERIES ECONOMY STRIKES
FOR FACEPLATE PART #
Special Offset Latch Entry Satin Chrome 028493
Centreline Latch Entry Aluminum 028494
15BS 15CA
For light use with narrowline aluminum cylindrical locks
15BS• Replaces Edwards #9
• For special offset latch entry
• Voltage: 11-16 VAC
• Size: 1-1/4” x 5-7/8”
• 5/8” latch projection
• Fail secure
• For hollow metal, aluminum or wood frames
• Non-handed
15CA• Replaces Peso 710
• For centerline latch entry
• Voltage: 11-16 VAC
• Size: 1-1/4” x 5-7/8”
• 5/8” latch projection
• Fail secure
• For hollow metal, aluminum or wood frames
FOR FINISH PART #
Centreline Latch Entry Stainless Steel 105559
I 309
© 2020 - 2021
R
142
0161 RIM ELECTRIC STRIKES
0162 RIM ELECTRIC STRIKES
RCI0 SERIES RIM ELECTRIC STRIKES
DESCRIPTION PART #
Fail Secure 12VAC/DC Strike 029226
Fail Secure 24 VAC/DC Strike 029287
Double Door Housing 0803830161 0161DDH
DESCRIPTION PART #
Fail Secure 12/24VAC/VDC Strike 100012
Double Door Housing 100013
0563 1/2” RIM ELECTRIC STRIKE
DESCRIPTION PART #
Fail Secure/Fail Safe 1/2” 12/24VDC Strike 107997
• Surface mounted - no frame cutting required
• New third wire for cooler operation
• Conventional keeper design (one moving part) - promotes even load distribution
• Lockdown holes for secure mount
• Compatible with most Pullman latch exit devices
• Accommodates exit devices with latch projections from 1/2”-3/4” (13mm-19mm)
• Horizontal adjustment ensures proper latch positioning to compensate for door misalignments - up to 1/4” (6.4mm)
• Non-handed - for use with right and left handed doors
• Field selectable voltage input
• Low Energy - 0.01A (10mA) Auto-sensing 12-24VDC
• Plug-in wire connector
• Hex socket head cap screws for added support and tamper resistance
• UL 1034 Listed for 1500lbs of static strength, burglary resistant
• Size: 1-3/4”W x 9”H x 1/2”D
• PoE power friendly
• No frame cutting required - surface mounted
• Compatible with most major exit devices
• Accommodates exit devices with latch projections from 1/2” to 3/4” (13mm - 19mm)
• Ensure proper latch alignment with horizontal adjustment up to 1/4” (6.4mm) to compensate for door misalignments
• Non-handed
• Field selectable voltage input -12 or 24VDC and 12 to 24VAC (even 11 to 16VAC)
• Horizontal solenoid prevents manipulation from vibration
• Hex socket head cap screws for added support and tamper resistance
• Mounting spacer included to provide enhanced latch engagement
• UL 1034 Listed for 1500lbs of static strength, burglary resistant
• Size: 1-3/4”W x 9”H x 3/4”D
• For Hollow Metal, Aluminum or Wood Frames
• Universal design accommodates most manufacturers’ exit devices
• Accommodates 1/2” to 3/4” Pullman latch projection
• Extensive horizontal adjustment
• Fully reversible (non-handed)
• UL 1034 Listed for 1500lbs of static strength, burglary resistant
• Size: 1-3/4”W x 9”H x 3/4”D
* A minimum frame depth of 1-5/8” for surface-mounted installations
MADE IN
CANADA
I 310
© 2020 - 2021
R
143
8 SERIES MULTIMAG®
MINIMAG® & MICROMAG®
RCIMAGNETIC LOCKS
DESCRIPTION FINISH PART #
Standard Mag Lock Aluminum 028497
Mag Lock with Door Status Sensor Aluminum 074352
Brackets for 8310 Aluminum 062850
Double Standard Mag Lock Aluminum 029322
• 1500 lbs holding force per magnet
• Adjustable keyhole mounting bracket for simplified installation
• Built-in time delay (instant release with adjustable relock, programmable from 0-110 seconds)
• Field selectable voltage – 12/24VDC
• Convenient plug-in wiring terminals
• Stabilizing 4-bolt “Drop Stop“ mag mounting (8-bolt for 8320)
• MOV surge protection
• No residual magnetism
• Low energy consumption
• Hardened steel armature nut
• Self-drilling tek™ fasteners
8310• Single outswinging interior or perimeter doors
• Size: 1-5/8” x 2-7/8” x 10-1/2”
• Delayed egress electromagnetic lock available by special order: Model# DE8310
DSS Option - Door Status Sensor• Ceramic magnet-reed type sensor for remote indication of door status (opened
or closed, independent of local power); magnet embedded in armature for tamper resistance; reed switch inside electronic housing cavity for easy access
8320• Double outswinging interior or perimeter doors without mullion
• Size: 1-5/8” x 2-7/8” x 21”
8310
8320
TYPE FINISH PART #
Sliding Aluminum 072973
Swinging Aluminum 076736
Swinging Aluminum 062849
• For interior use only
• Brushed anodized aluminum finish
• Low energy consumption
• Field-selectable voltage 12/24VDC
• MOV surge protection
• Hardened steel armature nut
• No residual magnetism
• Low profile design
8360 - Mortise minimag®
• Remote lock status - RLS
• Holding force: 750 lbs
• 1-1/16” x 1-1/2” x 9”
8371 - Surface MiniMag®
• Holding force: 750 lbs
• 1” x 1-7/8” x 9-3/8”
8375 - Surface MicroMag®
• Holding force: 250 lbs
• 13/16” x 1-1/2” x 6-17/32”
8375
8371
8360
TJ10
I 311
© 2020 - 2021
R
144
ELECTRIC CABINET LOCK
RCIMAGNETIC GATE LOCK, ELECTRONIC CABINET LOCK & POWER SUPPLY ACCESSORY
8380 GATEMAG® MAGNETIC GATE LOCK
• Up to 1500 lbs holding force
• No residual magnetism
• Weather-resistant stainless steel housing
• Versatile face or bottom mounting
• Built in RLS (remote lock status)
• Field selectable voltage 12/24VDC
• Throughbolt mounting
• 6-1/2’ wire cable
• Conduit fitting 1/2” inside diameter, 3/4” outside diameter
• MOV surge protection
• cULus Listed
SIZE PART #
1-3/4” x 2-1/2” x 8-7/8” 080081
• Field selectable fail secure or fail safe assembly
• Field selectable dual voltage 12/24VDC operation
• Plated (rust-resistant) self adjusting steel locking pin assembly
• 440 lbs holding force
• Low energy consumption (184mA @ 12VDC, 90mA @ 24VDC)
• Includes hardware kit
• For sliding or swinging cabinet doors
• Elongated holes on tongue for adjustable mounting
• Dual Monitoring option available by special order: Model# 3513DM
DESCRIPTION SIZE PART #
Electric Cabinet Lock 1-1/8” x 1-3/16” x 2-7/8” 100007
365 DAY, 99 EVENT TIMER
PART #
086293
• 2 momentary or latching SPDT relays to control locks and other electronically controlled devices or circuits
• 40 holidays and 99 user events
• Automatic voltage selection 12 to 24 VAC or DC
• Large alpha-numeric backlit LCD display for easy programming 16 characters by 2 line LCD
• Lithium battery included
• Ideal for openings requiring scheduled access
• Size: 3-3/4” x 4-11/16” x 1”
I 312
© 2020 - 2021
R
145
10 SERIES 1.5 AMP POWER SUPPLIES
RCIPOWER SUPPLY & POWER SUPPLY ACCESSORIES
PLUG & WIRE-IN TRANSFORMERS & RECTIFIER
DESCRIPTION OUTPUT CURRENT PART #
Plug-In Transformer 12VAC 20VA 064870
Plug-In Transformer 24VAC 20VA 064871
Wire-In Transformer 24VAC 40VA 036933
1 Amp Rectifier 028490
T1002/ T1008 - Plug-In Transformer• Plug into a standard 115VAC outlet to provide low voltage AC output
• Thermally protected to prevent overload due to short
• Transformer will need to be replaced once fuse is blown
• UL listed
• T1102 - size: 2” x 2-1/4” x 3-1/4”, T1108 - size: 2-3/8” x 2” x 2”T1009 - Wire-In Transformer• For permanent installations requiring hard wiring
• Size: 2-3/8” x 2” x 2”R10R1 - Bridge Rectifiers• Bridge rectifier changes AC power source to DC output for DC strikes & mag locks
T1002/ T1008
R10R1
T1009
DESCRIPTION PART #
1.5 Amp Power Supply 107721
1.5 Amp Power Supply with Fire Panel Disconnect 107722
Slide Switch
Field Selectable 12VDC and 24VDC output via slide switch
• Field selectable voltage 12/24VDC
• Exceptional brown out protection
• Surge protection input
• Class 2 fused DC output
• AC and DC visual indication
• Precise battery regulation for lead acid batteries
• Online batteries provide no drop switch over on AC failure
• Form C relay to indicate AC failure
Input: • AC input 115VAC/60Hz
• AC visual indicator
Output: • Norminal output voltage 12VDC or 24VDC
» 1.5 Amp supply current at 12VDC
» 1 Amp supply current at 24VDC
• Thermally protected DC output
• AC fail relay
• Visual indication
• Size: 12.5” x 12.5” x 4”
Certifications:• UL listed
• Access control unit power supply
• Power distribution modules and 24V to 12V DC convertor are listed subassembles
Applications:• To power access control systems
• To power electric locking systems
• To power electromagnetic locking systems
I 313
© 2020 - 2021
R
146
9 SERIES STANDALONE DIGITAL KEYPADS
9 SERIES EASY READ-MAGSTRIPE™ CARD READER
RCIMAGSTRIPE CARD READER & STANDALONE DIGITAL KEYPADS
DESCRIPTION PART #
Reader with Starter Pack 070929
Package of 100 Shadow Cards 070930
• Stainless steel read head
• Includes starter pack with master card and 100 enrollment (shadow) cards used to enroll and delete users
• Programming of opening time and lock mode is set with master card
• Can program up to a maximum of 1,000 cards per reader
• Satin chrome finish
• Accepts any ANSI standard Track II magstripe® card such as a drivers license or credit card
• For internal or external use (-20°C)
• Size: 1-3/8”W x 3-1/2”H x 1-3/8”D
RELAY RATING INPUT VOLTAGE BACKLIT PART #
8A@250V 12-24 VAC/VDC No 100313
2A@30VAC/DC 12-24 VAC/VDC Yes 101780
5A@30V 12VDC Yes 080344
9212I
9325I
9212I/ 9212ILW• Keypad programmable
• Single gang flush mount design
• 120 user capability
• Electronics mounted on back of keypad
• Stainless steel faceplate
• Three LED’s to indicate status and provide user with visual PIN entry confirmation
• Field selectable 12-24 VAC/VDC
9212I - Interior Use• Input trigger for Request-To-Exit (REX) or other open circuit contact
• Up to 4 independant outputs assignable by code
• All outputs programmable for latched or timed operation
• Size: 2-3/4” x 4-1/2” x 1-1/4”
9212ILW - Interior or Exterior Use• Heavy chrome plated trim ring
• Key press feedback via sounder and yellow LED
• Built-in assignable sounder
• Bi-color Red/Green LED indicates relay status
• Size: 3-3/8” x 5-1/8” x 5/8”
9235I - Interior Use• Accommodates up to 120 users
• EEPROM memory ensures programming remains intact when unit is not powered
• Secure access codes (4-8 digits)
• Silent mode (audible annunciation of key presses can be disabled)
• Programmable lockout
• Variable output time delay (1-60 seconds)
• Interior and exterior models
• Surface mount design
• 12 VDC
• Size: 2-3/4” x 4-1/2” x 1-5/32”
9212ILW
I 314
© 2020 - 2021
R
147
HANDICAP EXIT BUTTONS & SWITCHES
TAMPER RESISTANT KEY SWITCHES
RCIKEY SWITCHES & BUTTONS
TYPE MOUNTING PART #
Momentary Gang 028498
Maintained Gang 028499
Maintained Narrow Stile 090391
Momentary Narrow Stile 029192
Momentary Switch Only 090888
Maintained Switch Only 090889
MOUNTING BUTTON TYPE PART #
Wall Beige with Embossed Key 036915
Gang Blank Blue Mushroom Button 036916
Narrow Stile Blank Blue Mushroom Button 036917
Gang Red “Push to Exit” 071414
Gang Red Embossed “Exit” 036918
Narrow Stile Red Embossed “Exit” 036919
Gang 4” Stainless Embossed Handicap 071416
Junction 6” Stainless Embossed Handicap 071415
• Extruded clear aluminum 1/4” plate with beveled edges
• UL rated switches are SPDT and can be used for Normally Open (NO) or Normally Closed (NC) applications
• Contacts are rated at 3A@125 VAC, 1A@250VAC
• Can mount 2 switches on easy lock-down dual-switch bracket
• For 1-1/8” mortise cylinders with straight or clover cams (not supplied)
• Supplied with spanner screws & wrench
960• Size: 3” x 4-3/4”
960N• Size: 1-5/8” x 4-3/4”
960N960
917
• Momentary action switch standard
909• 2-3/8” x 2-3/8”
• Surface mount under desk or counter for concealment
916B/ 916NB• 916B: 3” x 4-3/4” • 916NB: 1-5/8” x 4-3/4”
• Tamper resistant handicap blank blue button
• Ideal for Request-To-Exit (REX) applications
• 20 gauge stainless steel faceplate
917• 2-3/4” x 4-1/2”
• Easy touch exit push button 12-40 VDC
• Totally weatherproof
• Solid state/no moving parts
• Pressure sensitive
950HP4/6• 4-1/2” or 6” round
• Ideal for Request-To-Exit (REX) applications
• Stainless steel faceplate
916B 916NB
950HP4/6
909
I 315
© 2020 - 2021
R
ROSSLARESTANDALONE KEYPAD & PROXIMITY CONTROLLERS
OUTDOOR MULLION BACKLIT PIN/PROXIMITY STANDALONE CONTROLLER
148
AC Q41H
AC Q42H
PART #
085010
• 500 dual code users
• 2 x 3 amp relays
• 2 inputs with user programmable logic
• 2 tri-colored LED indicators
• Fully-potted, meets IP65
• 3 user levels and 3 modes of operation
• Optical case and back tamper protection
• Lockout feature on wrong entries (keypad/card tamper)
• Input voltage VDC: 12–24 VDC; 16–24 VAC
• Max. input current 12 VDC @ 160 mA
• Standby input current 12 VDC @ 95 mA
• Max. read range: 3.15”
• Operating temprature: -32°C to +63°C
• Operating humidity: 0 to 95% (non-condensing)
• Outdoor usage: Weather resistant, meets IP65
• Size: 5.33”L x 1.74”W x 1.12”D
ANTI-VANDAL METAL BUTTON PIN/PROXIMITY STANDALONE CONTROLLERS
• 500 dual code users
• 2 x 2 amp relays
• 3 user levels and 3 operation modes
• Selectable PIN code length: 4–8 digits
• Auxiliary input and auxiliary output
• Input for Request-To-Exit (REX) button
• 2 tri-colored LED indicators
• Fully-potted, meets IP65
• Optical case and back tamper protection
• Lockout feature on wrong entries (keypad/card tamper)
• Terminal block interface for wiring
• Max. relay current: 2A
• Operating tempratures: -20°C to +60°C
• Weather resistant, meets IP54
• Size: 4.72”L x 2.8”W x 1.17”D
• Rugged metal construction
AC Q41H• Pin only
• Input voltage VDC: 12–24 VDC; VAC: 12–24 VDC
• Max. input current 12 VDC @ 100mA
• Standby input current 12 VDC @ 40mA
AC Q42H• Pin/proximity
• Input voltage VDC: 12–24 VDC; VAC: 16–24 VDC
• Max. input current 12 VDC @ 125 mA
• Standby input current 12 VDC @ 65 mA
• Built-in 125 kHz RFID
FUNCTION PART #
Pin Only 086890
Pin / Prox 086891
I 316
© 2020 - 2021
V
173
VON DUPRIN5100, 6100 & 6200 ELECTRIC STRIKES
5100 MULTI-FUNCTION SERIES
6100 & 6200 HEAVY DUTY STRIKES
• Voltage: 12 or 24 VDC continuous duty
• Fail safe or fail secure, easily changed in less than thirty seconds
• Includes mounting tabs & neoprene filler plate
• 1300 lbs of holding strength
• Keeper depth of 1⁄2”: Accommodates latches up to 5/8” throw
• Tested to over one million cycles
• Faceplates included: 4-7⁄8” ANSI round corner, 4-7⁄8” ANSI square corner, 7-15⁄16” long, round corner wood frame prep
• Adjustable keeper provides a snug fit and reduces pressure from the door on the strike
FOR VOLTAGE PART #
Rim Exit Devices 12VDC Fail Secure 062202
Rim Exit Devices 24VDC Fail Secure 030163
Rim Exit Devices 12VDC Fail Secure 037252
Rim Exit Devices 24VDC Fail Secure 030192
Cylindrical or Mortise 24VDC Fail Secure 030193
PART #
074901
1/2"
2 3/16"
1 3/8"
13/16"
15/8"
41/2"
MinimumClearance
6"
1 5/8"
7/8"
1 5/8"
9"
7/8"
3/4"
2 9/16"
MinimumClearance
9/16"
4 1/2"
1 5/8"
1 1/4"
4 7/8"
7/8"
1/2"
1 3/8"
MinimumClearance
12"
1 15/32"
1 11/16"
3 3/8"
2 1/6"
1/8"
• Stainless steel construction
• Accepts 3⁄4” throw latchbolt
• Non-handed
• Fail secure
• Horizontally adjustable
• Plug connectors
6111• For use with rim exit devices on single doors or double doors with mullion
applications
• For hollow metal, aluminum or wood
6112• For use with rim exit devices on single door applications
• For hollow metal, aluminum or wood
6211• Electric strike for use with mortise locks without deadbolt or cylindrical locks on
single door, hollow metal frames
6111
6112
6211
I 366