standard blister packs - sabre medical
TRANSCRIPT
Validated «Babuschka» blister packs: Quick availability and low-cost tools!
The inside geometry can be adapted to the product. Press-cut contours and sealing edges are specified in order to have recourse to validation documentation (to ISO 11607). Stability lasting 5 years was demonstrated. Your products need only to have the sterilisation validations carried out. As an addition to the existing validation, we also provide transport tests with your products in accordance with ISTA 2A.
Inside blister «Babuschka» No. 2 for four different screws and standard outside blister No. 3 each made of PETG, sealed with Tyvek®
M E D I C A L P A C K A G I N G
Standard blister packs Type «Babuschka» validated according to ISO 11607
Certified to ISO 9001:2008and ISO 13485:2012
Technical subject to change
www.medipack.com
MEDIPACK AGMühlentalstrasse 184–1888200 SchaffhausenSwitzerlandPhone: +41 52 630 36 36Fax: +41 52 630 36 [email protected]
MEDIPACK AGGerman Subsidiaryc/o Dachser SEJosef-Schüttler-Str. 578224 [email protected]
10/2017
inside dimensions
Outer dimensions Single: 1 mm smaller each
Sheet format
No. of pack blanks per sheet
Babuschka no. 1 19.5 x 44 mm 35 x 67.5 mm 310 x 225 mm 21 x
Babuschka no. 2 36 x 69 mm 52 x 94 mm 310 x 225 mm 10 x
Babuschka no. 3 53 x 95.5 mm 69 x 121.5 mm 310 x 225 mm 6 x
Babuschka no. 4 70 x 123 mm 86 x 150 mm 310 x 225 mm 4 x
Babuschka no. 5 87 x 151.5 mm 103 x 179.5 mm 460 x 225 mm 4 x
Babuschka no. 6 104 x 180.5 mm 120 x 210 mm 460 x 225 mm 3 x
Height systems in mm
1 2 3 4 5 6
Babuschka no. 1 10 15 20 - - -
Babuschka no. 2 11.5 16.5 21.5 31.5 -
Babuschka no. 3 13 18 23 33 43
Babuschka no. 4 14.5 19.5 24.5 34.5 44.5 54.5
Babuschka no. 5 16 21 26 36 46 56
Babuschka no. 6 17.5 22.5 27.5 37.5 47.5 57.5
Size comparison (approx.1:1)
6 5 4 3 2 1
The advantages of the Babuschka blister pack:• •
•
•
• to ISO 11607
• Comprehensive validation service, incl. consultation and coordination
• Lower-cost deep-drawn, punching and sealing tools
The respectively smaller blister serves as the inside blister for the outer blister.
to ISO 11607to ISO 11607to ISO 11607
sealing toolsLower-cost deep-drawn, punching and
adapted to the requirementsPress-cut contours and sealing edges are Press-cut contours and sealing edges are specifi ed which helps to reduce validation costsThe inside geometry can be adapted to the The inside geometry can be adapted to the product
Validated «Babuschka» blister packs: Quick availability and low-cost tools!
Quicker availabilityAvailable as single blister or multipackThe material thickness and quality can be adapted to the requirementsPress-cut contours and sealing edges are specifi ed which helps to reduce validation costsThe inside geometry can be adapted to the product
•
Comprehensive validation documentation
-
-