standard hosereel cabinet - fire protection...
TRANSCRIPT
STANDARD FIRE HOSEREEL CABINET
FEATURES• Compact and elegant design.• Quality finishes in epoxy/polyester powder coated and oven baked.• Easy and fast installation with minimum labour required.
Fig.300
Fig.320
Fig.310
Fig. 300 � � �
Fig. 310 � � � �
Fig. 320 � * � �
Model
Features for 25mm x 30M Swing Type Fire Hosereel Cabinet
Plasticdoorcam
3mmglass Springlock
SpareKey Box
Aluminiumhandle
* The glass is 5mm tempered type.
GENERAL“AE” range of surface wall mounted standard type fire hosereel cabinets are generally fabricated from electro-galvanised steel material. Aluminium or stainless steel materials are available upon request.
The door hinges are either riveted or welded to the cabinet and swings out 180 degree from left to right. The cabinet comes with viewing panel design at the door to show the equipment installed inside.
The quality of workmanship and finishes are carefully planned and executed from the initial stage of preparing the material, fabrication, upto the surface preparation and powder coating.
The standard finishes of the electro-galvanised steel and aluminium cabinets are “Red” epoxy/polyester powder coated and oven baked. Stainless steel Type 304 and 316 grade cabinets come with 4B quality finishes. Other finishes available on request.
STANDARD FIRE HOSEREEL CABINET
* All dimensions shown are in millimetres.* Due to the improvement in the design and standard, we reserve the right to change the specifications without prior notice.
Fig 300
Fig 310
Fig 320
FIRE HOSEREEL
OPERATING INSTRUCTION: TURN ON THE INLET VALVE BEFORE RUNNING OUT THE HOSE
340mm 16mm
800mm
800mm
Steel hinge
Plastic doorcam (w/o key-lock type)
“FRONT ELEVATION” “SECTION VIEW” “REAR VIEW”
125mm
125mm
495mm
25mm
95mm 50mm 200mm
12mm dia x 4 nos mounting holes
100mm
“PLAN VIEW”
U-slot cut-out at bottom panel for hosereel piping
3mm plain glass
FIRE HOSEREEL
OPERATING INSTRUCTION: TURN ON THE INLET VALVE BEFORE RUNNING OUT THE HOSE
340mm 16mm
800mm
800mm
Steel hinge
“Key-alike” springlock
“FRONT ELEVATION” “SECTION VIEW” “REAR VIEW”
125mm
125mm
495mm
25mm
95mm 50mm 200mm
12mm dia x 4 nos mounting holes
100mm
“Plan View”
U-slot cut-out at bottom panel for Hosereel piping
3mm plain glass
70mm x 70mm Spare Key Box
FIRE HOSEREEL INSTRUCTIONS: IN CASE OF FIRE, BREAK GLASS TO OPEN DOOR
TURN ON THE INLET VALVE BEFORE RUNNING OUT THE HOSE
362mm 18mm
800mm
800mm
Welded lift-up Steel hinge
“Key-alike” springlock
“Front Elevation” “Section View” “Rear View”
Aluminium handle
25mm
100mm 50mm 200mm
12mm dia x 4 nos mounting holes
100mm
“Plan View”
U-slot cut-out at bottom panel for hosereel piping
5mm clear “tempered” glass
U-Rubber gasket
Door with single bending with gap for fixing U-Rubber
123mm
565m
m
145mm
50mm high “White” silk-screen wordings
12.5mm high “White” silk-screen wordings