12/06/2013

D1 Base Connection at Wide Foundation 08/07/08

ATMI PRECAST

STANDARD SHOP DRAWING DETAILS

TABLE OF CONTENTS

12/06/2013

D2 Base Connection at Poured Wall = Outside Faces 08/07/08

D3 Base Connection at Poured Wall = Panel Thickness 08/07/08

D4 Floor Tie Detail 08/07/08

D5 Base Connection at Panel Face 08/23/13

D6 Base Connection at Panel Face 08/07/08

D10 Typ. Pole Bracing Sect. for B-4 Braces 08/23/13

D11 Typ. Pole Bracing Plan View for B-4 Braces 08/07/08

D12 Typ. Pole Bracing Sect. for B-5 Braces 08/23/13

D13 Typ. Pole Bracing Plan View for B-5 Braces 08/07/08

D14 Erection Rigging for 6 Point Pick 08/07/08

D15 Erection Rigging for 8 Point Pick 08/07/08

D20 Beam Pocket 08/07/08

D21 Beam Pocket @ Joint Section 08/22/08

D22 Beam Pocket @ Joint Detail 03/18/09

D23 Beam Bearing Embed Plate 11/17/09

D30 Joist Girder Bearing Angle within Panel Width 08/07/08

D31 Joist Girder Bearing Angle at Panel Joint 08/22/08

D32 Joist Girder Bearing Angle @ Joint – Panel Face 03/18/09

D35 Joist Bearing on Haunch at Inside Face 08/07/08

D36 Joist Bearing on Angle at Inside Face 08/07/08

D37 Joist Bearing at Outside Face 08/07/08

D40 Deck Bearing Angle at Inside Face 08/07/08

D41 Deck Bearing Plates at Outside Face 08/07/08

D44 Panel to Panel Mid-point Alignment Connection 09/19/13

D45 Panel to Panel Mid-point Alignment Connection 08/22/08

D46 Panel to Panel Critical Connection 08/22/08

D47 Panel to Panel Shear Connection 08/22/08

D48 Panel to Panel Top Alignment Connection 08/07/08

D50 Mitered Corner Connection 08/22/08

D51 Outside Butt Corner Connection 08/22/08

D52 Inside Butt Corner Connection 08/22/08

12/06/2013

D53 Overlap Back to Back Corner Connection 08/22/08

D54 Hidden Panel to Panel Connection – Roscoe 08/07/08

D60 Typical Wall Panel – Spandrel Support 08/07/08

D61 Heavy Duty Wall Panel – Spandrel Support 08/07/08

D65 False Joint 08/07/08

D66 Vertical / Horizontal Reveal 08/07/08

D67 Caulk Corner at Opening 12/06/13

D68 ½” Edge Chamfer at Opening 12/05/13

D69 ¾” Edge Chamfer at Opening 12/05/13

D70 ¾” Chamfer on Both Faces at Butt Corner 08/07/08

D71 Continuous Drip reveal at Opening Head 12/05/13

D72 Typical Wash at Opening Sill 12/05/13

D73 Typical Panel Joint 08/22/08

D74 Typical Rated Panel Joint 08/22/08

D80 Inside Face Hollowcore Bearing 03/31/09

D81 Outside Face Hollowcore Bearing 03/31/09

D82 Inside Face Hollowcore Bearing @ T/Wall Panel 03/31/09

D83 Hollowcore Non-Bearing Walls 08/23/13