startup and shutdown procedures for the uic ccrb...
TRANSCRIPT
System Start up 1. Turn the power strip (#1) next to the
computer. 2. Start PC (#2) and WAIT until you get to the
Windows desktop. 3. Turn on Ibidi 37oC/CO2/O2 environmental
controller if needed (note: system requires ~30min to equilibrate)
4. Log in Windows using UIC User account. 5. Log in with UIC iLab account information. 6. Start NIS-Elements from desktop icon. Shutdown of System 1. Transfer saved files to removable media, or server. Do
not leave your files on the computer. NEVER save any files to the C: drive.
2. Close all applications. Select Shutdown BEFORE logging out of iLab when done (if no one is waiting).
3. Clean up. 4. Become rich and famous!
Startup and Shutdown Procedures for the UIC CCRB Nikon TiE Deconvolution Microscope
1. Turn the power strip (Environmental
stage) next to the Ibidi controllers. Note: system requires ~30min to equilibrate
2. Tilt transmitted light head back. 3. Remove stage screws and stage.
4. Install 96-well plate insert. 5. Install correct insert for Ibidi stage
(slide or 35mm dish)
Procedure for the UIC CCRB Ibidi Slide/Dish Envirnonmental Chamber on
Nikon TiE Deconvolution Microscope