statement of peer review - pnup repository
TRANSCRIPT
17, avenue du Hoggar - PA de Courtabœuf – BP 112 - 91944 Les Ulis Cedex A (France)
Tél. : 33 (0)1 69 18 75 75 - Fax : 33(0)1 69 07 45 17 – www.edpsciences.org
Statement of Peer review
In submitting conference proceedings to Web of Conferences, the editors of the proceedings certify to the Publisher that
1. They adhere to its Policy on Publishing Integrity in order to safeguard good scientific practicein publishing.
2. All articles have been subjected to peer review administered by the proceedings editors.
3. Reviews have been conducted by expert referees, who have been requested to provideunbiased and constructive comments aimed, whenever possible, at improving the work.
4. Proceedings editors have taken all reasonable steps to ensure the quality of the materials theypublish and their decision to accept or reject a paper for publication has been based only onthe merits of the work and the relevance to the journal.
Proceedings editor(s):Ade Gafar AbdullahAsep Bayu Dani Nandiyanto
The 3rd Annual Applied Science and Engineering Conference (AASEC)18 April 2018, Universitas Pendidikan Indonesia, Bandung, Indonesia
Ade Gafar Abdullah
Bandung, 12 August 2018
All issues Series Forthcoming About Search Menu
All issues Volume 197 (2018)
Previous issue Table of Contents Next issue
Free Access to the whole issue
MATEC Web of ConferencesVolume 197 (2018)
The 3rd Annual Applied Science and Engineering Conference (AASEC 2018)
Bandung, Indonesia, April 18, 2018 Ade Gafar Abdullah and Asep Bayu Dani Nandiyanto (Eds.)
Export the citation of the selected articles Export Select all
Open Access
Statement of Peer review Published online: 12 September 2018PDF (34.4 KB)
Open Access
About the conference Published online: 14 September 2018PDF (10.7 MB)
- MathematicsOpen Access
Solving the heart curve with geogebra 01001Ida Nuraida, Hamdan Sugilar, Rahayu Kariadinata, Juariah Juariah and Nunung SobarningsihPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819701001PDF (411.9 KB) References
Open Access
Representations of cyclically ordered semigroups 01002Rizky Rosjanuardi, Isnie Yusnitha and Sumanang Muhtar GozaliPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819701002PDF (240.6 KB) References
Open Access
The kumjian-pask algebras of �nite �nitely aligned k-graphs without cycle as modules 01003Sumanang Gozali, Rizky Rosjanuardi and Isnie YusnithaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819701003PDF (255.3 KB) References
Open Access
The behaviour of measles transmission in three di�erent populations 01004Budi Priyo Prawoto, Dimas Avian Maulana and Yuliani Puji AstutiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819701004PDF (298.4 KB) References
Open Access
The braid group: rede�ning 01005Mahyuddin K M NasutionPublished online: 12 September 2018
Journals Books Conferences EDPS Account
Mathematics
Physics
Computer Science
Material Science
Chemistry
Biology
Pharmacology
Mechanical Engineering
Chemical Engineering
Civil Engineering
Electrical Engineering
Material Engineering
Environmental Engineering
Industry Engineering
Information Engineering
Computer and Communication Engineering
Architecture
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
DOI: https://doi.org/10.1051/matecconf/201819701005PDF (315.2 KB) References
Open Access
The implementation of �sher yates shu�e on aljabar learning media based on hybrid application 01006Iyon Maryono, Wildan Budiawan Zul�kar and Rahayu KariadinataPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819701006PDF (511.3 KB) References
Open Access
Total vertex irregularity strength of comb product of two cycles 01007Rismawati Ramdani and Muhammad Ali RamdhaniPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819701007PDF (370.5 KB) References
Open Access
Heat transfer problem analysis in three dimension tromol brake system problem 01008Tulus Tulus, Sudirman Sudirman, U. Sinulingga and T.J. MarpaungPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819701008PDF (350.1 KB) References
Open Access
Optimization temperature in the room using air conditioner with �nite element methods 01009Tulus Tulus, Lamtiur Simbolon, Sawaluddin Sawaluddin and T.J. MarpaungPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819701009PDF (482.4 KB) References
- PhysicsOpen Access
Simulation of granular in two dimensions: The e�ect of particle velocity on rigid wall boundary 02001Dewi Muliyati, Bagaskara Firdaus, Diah Ambarwulan, Ella Fitriani, Siswoyo Siswoyo, Fauzi Bakri and Handjoko PermanaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702001PDF (676.2 KB) References
Open Access
Low cost digitalization of observation telescope by utilizing smartphone 02002Ahmad Sohib, Niko Danusaid, Astri Sawitri, Bebeh Wahid Nuryadin and Rena Denya AgustinaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702002PDF (362.9 KB) References
Open Access
Preliminary study of simple methods to get the average speed using a smartphone's light sensor 02003Ea Cahya Septia Mahen, Seni Susanti, Bebeh Wahid Nuryadin and Ade Yeti NuryantiniPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702003PDF (402.4 KB) References
Open Access
Ozone application to extend shelf life of vegetables by microbial growth inhibition 02004A I Susan, E Sasmita, E Yulianto, F Arianto, M Restiwijaya, A W Kinandana and M NurPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702004PDF (495.7 KB) References
Open Access
Determination of ozone distribution in �sh cold storage dedicated plasma ozone technology 02005Intan Zahar, Yuliani Yuliani, Eko Yulianto, Meliza Meliza, Ade Ika Susan, Sumariyah Sumariyah and Muhammad NurPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702005PDF (346.2 KB) References
Open Access
The Pij matrix and �ux calculation of one-dimensional neutron transport in the slab geometry of nuclear fuel cell using collisionprobability method 02006Mohammad Ali Sha�i, Jakaria Usman, Seni H. J. Tongkukut and Ade Gafar AbdullahPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702006PDF (315.7 KB) References
Open Access
Structure and magnetic properties of Co-Zn substituted hexagonal ferrites 02007Erfan Handoko, Anggoro B S, Iwan Sugihartono, Mangasi AM, Dini Siti Nurwulan, Sera�n Christina and Zulkarnain JalilPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702007PDF (471.8 KB) References
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
Open Access
E�ects of sintering temperature on structure, magnetic and dielectric properties of La0.5Sr0.5Fe0.9Mn0.05Ti0.05O3 material 02008
Erfan Handoko, Iwan Sugihartono, Riser Fahdiran, Zulkarnain Jalil, Sitti Ahmiatri Saptari and Mangasi A MPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702008PDF (917.3 KB) References
Open Access
The in�uence of Cu doped on structure and mechanical properties of aluminium material 02009Anggoro B S, Erfan Handoko and Bambang SoegijonoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702009PDF (552.9 KB) References
Open Access
Synthesis of La1-xCaxMnO3 (x = 0 and 0.2) through ultrasonic mixing and its characterisation 02010
Mangasi A M, Iwan Sugihartono, Teguh B P, Sitti Ahmiatri Saptari and Erfan HandokoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702010PDF (546.7 KB) References
Open Access
Optimal tube diameter on heat exchanger shell and tube type with 15 mega watt thermal power using �uent 6.3 02011Siti Nurhasanah, Muhammad Subekti, Moch. Nurul Subkhi and Bebeh Wahid NuryadinPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702011PDF (1.078 MB) References
Open Access
Preliminary study of software tracker usage to analyze inhibitory style on free fall movie events 02012Seni Susanti, Ea Cahya Septia Mahen and Ade Yeti NuryantiniPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702012PDF (549.9 KB) References
Open Access
Analysis of Plasma-activated Medium (PAM) in aqueous solution by an Atmospheric Pressure Plasma Jet (APPJ) 02013Andi Wibowo Kinandana, Sumariyah Sumariyah and Muhammad NurPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702013PDF (652.9 KB) References
Open Access
E�ect of nanostructure Ni on the sorption properties of mechanical milled MgH2 for solid hydrogen storage materials 02014
Zulkarnain Jalil, Adi Rahwanto and Erfan HandokoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702014PDF (418.8 KB) References
Open Access
E�ect of di�erent permeability on electromagnetic properties of absorbing materials 02015Riser Fahdiran, Yuliyanti Dwi Utami and Erfan HandokoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702015PDF (1.025 MB) References
Open Access
Structural change of aluminum thin �lm in the temperature range from 300 K to 1000 K 02016Riser Fahdiran, Erfan Handoko, Iwan Sugihartono, Anggara Budi Susila, Esmar Budi and Setia BudiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819702016PDF (620.7 KB) References
- Computer ScienceOpen Access
Comparison of principal component analysis algorithm and local binary pattern for feature extraction on face recognition system03001
Ichsan Tau�k, Maya Musthopa, Aldy Rialdy Atmadja, Muhammad Ali Ramdhani, Yana Aditia Gerhana and Nanang IsmailPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703001PDF (441.0 KB) References
Open Access
SPADA: Online learning between universities of PGRI Indonesia 03002Muhammad Nur Hudha, Uwes Anis Chaeruman, Sudi Dul Aji, Choirul Huda, Andista Candra Yusro, Farida Nur Kumala, Wartono Wartono, Asep Bayu DaniNandiyanto and Ade Gafar AbdullahPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703002PDF (421.3 KB) References
Open Access
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
Hybrid Approach Rede�nition (HAR) model for optimizing hybrid ensembles in handling class imbalance: a review and researchframework 03003Hartono Hartono, Opim Salim Sitompul, Tulus Tulus, Erna Budhiarti Nababan and Darmawan NapitupuluPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703003PDF (426.8 KB) References
Open Access
Spatial pattern analysis and identi�cation type of open green space in Yogyakarta city 03004Muhammad Dimyati, Akhmad Fauzy and Anggara Setyabawana PutraPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703004PDF (916.2 KB) References
Open Access
Pseudo-prime number simulation and its application for security purpose 03005Robbi Rahim, Nuning Kurniasih, Nurmaliana Pohan, S Sriadhi, Tri Listyorini, Ricardo Freedom Nanuru, Rosida Tiurma Manurung, Asep Najmurrokhman,Abdurrozzaq Hasibuan et al. (2 more)Published online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703005PDF (911.5 KB) References
Open Access
Discretization method to optimize logistic regression on classi�cation of student’s cognitive domain 03006Yuni Yamasari, Puput W. Rusimamto, Naim Rochmawati, Dwi F. Suyatno, Setya C. Wibawa, Supeno M. S. Nugroho and Mauridhi H. PurnomoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703006PDF (474.3 KB) References
Open Access
Congklak, a traditional game solution approach with breadth �rst search 03007Robbi Rahim, Nuning Kurniasih, Abdurrozzaq Hasibuan, Liesna Andriany, Asep Najmurrokhman, S Supriyanto, W Wardayani, Rahmat Hidayat, D S W Lubis,Darmawan Napitupulu et al. (3 more)Published online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703007PDF (965.7 KB) References
Open Access
A combination of vigenere algorithm and one time pad algorithm in the three-pass protocol 03008Dian Rachmawati, Amer Sharif and Rosalia SianiparPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703008PDF (297.9 KB) References
Open Access
Insilico docking studies of daidzeion compounds as selective estrogen receptor modulator (SERMS) breast cancer 03009Yani Suryani, Opik Taupiqurrohman, Ai Rikani and Epa PaujiahPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703009PDF (317.9 KB) References
Open Access
Design of decision support system for santri admission 03010Undang Syaripuddin, Cepy Slamet, Hendri Prabowo and Muhammad Ali RamdhaniPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703010PDF (431.2 KB) References
Open Access
Enhanced pixel value di�erencing with cryptography algorithm 03011Robbi Rahim, Nuning Kurniasih, Frisma Handayanna, Linda Sari Dewi, Erene Gernaria Sihombing, Ester Arisawati, R Rinawati, Agus Perdana Windarto, Erlin WindiaAmbarsari et al. (2 more)Published online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703011PDF (284.5 KB) References
Open Access
Prototyping AR EduGame for children: learning Indonesian culture 03012Endah Sudarmilah, Heru Supriyono, Umi Fadlilah, Fatah Yasin Al Irsyadi and Azizah FatmawatiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703012PDF (434.1 KB) References
Open Access
Recommendation system for selecting universities in Indonesia using Google Maps API services 03013Aldy Rialdy AtmadjaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703013PDF (404.9 KB) References
Open Access
Decision support system for football player's position with tsukamoto fuzzy inference system 03014Yana Aditia Gerhana, Wildan Budiawan Zul�kar, Yuga Nurrokhman, Cepy Slamet and Muhammad Ali Ramdhani
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
Published online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703014PDF (442.8 KB) References
Open Access
Design of expert system for train operational feasibility with Tsukamoto fuzzy inference system 03015Jumadi Jumadi, Wildan Budiawan Zul�kar, Dicky Andika Sulaeman and Muhammad Ali RamdhaniPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703015PDF (251.5 KB) References
Open Access
Design of personnel information systems using rapid application development method 03016Dini Destiani Siti Fatimah, Asep Deddy Supriatna and Rina KurniawatiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703016PDF (380.3 KB) References
Open Access
Design of prototype decision support system for �ood detection based on ultrasonic sensor 03017Yosep SeptianaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703017PDF (265.5 KB) References
Open Access
Design of decision support system for blood analysis 03018Yosep Septiana, Dede Kurniadi, Asri Mulyani and Wiyoga BaswardonoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703018PDF (363.0 KB) References
Open Access
The implementation of web service based text preprocessing to measure Indonesian student thesis similarity level 03019Yan Watequlis Syaifudin, Pramana Yoga Saputra and Dwi PuspitasariPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703019PDF (477.6 KB) References
Open Access
Automation animal tracker using complex value neural network 03020Elly Matul Imah, Atik Wintarti, R. Sulaiman and Manuharawati ManuharawatiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819703020PDF (400.9 KB) References
- Material ScienceOpen Access
E�ect of charge on graphene vacancy for hydrogen storage application 04001Gagus Ketut Sunnardianto, Intan Ayu Larasati, Farid Triawan and Ammar M. AamerPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819704001PDF (285.6 KB) References
Open Access
E�ect of heat treatment on bio-corrosion rate of steel structure (API 5L) in marine evironment 04002Herman Pratikno, Harmin Sulistiyaning Titah and Bima Ero Dwi SyahputraPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819704002PDF (507.4 KB) References
Open Access
Structure and electrical properties of polymer electrolyte membrane for fuel cell application 04003Yusmaniar Yusmaniar, Afrizal Afrizal, Nurzaman Nurzaman and Erfan HandokoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819704003PDF (408.9 KB) References
Open Access
Laser induced ablation of aluminum nanoparticle: a molecular dynamics study 04004Riser Fahdiran, Erfan Handoko, Iwan Sugihartono and Herbert M. UrbassekPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819704004PDF (439.3 KB) References
Open Access
Deformation pro�le of a piece of japonica cooked rice with squeezing test 04005Efrina Efrina, Yoshiyuki Komoda, Hiroshi Suzuki and Ruri HidemaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819704005PDF (283.5 KB) References
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
- ChemistryOpen Access
Ethanol of ajwa 05001M. Dede Rodliyana, Saepudin Rahmatullah, Dudang Gojali, Ecep Ismail and Risma Nur ApipahPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819705001PDF (225.1 KB) References
Open Access
Synthesis of zeolite L using rice husk ash silica for adsorption of methylene blue: kinetic and adsorption isotherm 05002Citra Deliana Dewi Sundari, Soni Setiadji, Yusuf Rohmatullah, Sanusi Sanusi, Denia Febby Nurbaeti, Ira Novianti, Ida Farida, Ai Nurohmah and Atthar LuqmanIvansyahPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819705002PDF (548.1 KB) References
Open Access
The increased use value of bamboo leaves as silica source for t-type zeolite synthesis 05003Soni Setiadji, Citra Deliana Dewi Sundari, Endang Lala, Denia Febby Nurbaeti, Ira Novianti, Dede Suhendar, Wahyudin Darmalaksana and Atthar Luqman IvansyahPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819705003PDF (579.9 KB) References
Open Access
Cyclic voltammetry in electrochemical oxidation of amoxicillin with Co(III) as mediator in acidic medium using Pt, Pt/Co and Pt/Co(OH)2electrodes 05004H. Herlina, Muhammad Ali Zul�kar and B. BuchariPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819705004PDF (517.9 KB) References
- BiologyOpen Access
Screening of cellulose- and lignin-degrading fungi for improving nutritive quality of ruminant feed 06001Muhammad Fauzi, Nisa Rachmania Mubarik and Anuraga JayanegaraPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819706001PDF (261.3 KB) References
Open Access
δ aminolevulinic acid dehydratase (ALAD) gene polymorphism of marine taskforce personnel whit routine exposure of lead suspendedin air 06002Rini Puspitaningrum, Chris Adhiyanto, Nurmasari Sartono, Palgunadi Palgunadi, Solihin Solihin, Yasuhiro Yamashiro and Yukio HattoriPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819706002PDF (634.4 KB) References
Open Access
Microsatellite analysis of the mating system of Bruguiera gymnorrhiza and Kandelia obovata 06003Mohammad Basyuni, Shigeyuki Baba, Hirosuke Oku, Ridha Wati and Annisa FitriPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819706003PDF (373.3 KB) References
Open Access
Search for polyisoprenoids in the �owers and fruits of selected coastal plants using two-dimensional thin layer chromatography 06004Mohammad Basyuni, Ridha Wati, Astrid Nur Prabuanisa, I Komang Tri Wijaya Kusuma, Hamiuddin Hamiuddin, Guntur Guntur and Hiroshi SagamiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819706004PDF (406.5 KB) References
Open Access
The potential of tropical grass as a feed in ruminant by using an in vitro gas production 06005Nevyani Asikin, Anuraga Jayanegara, Muhamad Ridla and Anjas Asmara SamsudinPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819706005PDF (203.3 KB) References
Open Access
Morphological characteristic of black-winged myna (acridotheres melanopterus)* 06006Renaldi Ednin Vernia, Anais Tritto, Abinawanto Abinawanto, Nurul Winarni, Anita mayasari, Agung Sedayu and Anom BowolaksonoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819706006PDF (598.1 KB) References
Open Access
Sexual behaviour of lowland anoa (bubalus depressicornis) in the captivity of anoa breeding centre (ABC) Manado* 06007Anita Mayasari, Diah Irawati Dwi Arini, Ady Suryawan, Rahma Suryaningsih, Renaldi Ednin Vernia, Abinawanto Abinawanto, Ade Suryanda and Anom BowolaksonoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819706007PDF (546.9 KB) References
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
Open Access
Vaginal swab cytology aplication to determine the estrus cycle of lowland anoa (bubalus depressicornis, smith, 1927) in captivity 06008Anita Mayasari, Ady Suryawan, Margaretta Christita, Adven Tri Joy Simamora, Abinawanto Abinawanto, Ade Suryanda and Anom BowolaksonoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819706008PDF (504.1 KB) References
- PharmacologyOpen Access
Antihyperglycemic and diabetic wound healing activity of smallanthus sonchifolius leaves extract 07001Rina Herowati, Alip D.S. Saputri, Tri Wijayanti and Gunawan P. WidodoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819707001PDF (380.5 KB) References
Open Access
Correlation between total lymphocyte counts and CD4 among human immunode�ciency virus (HIV) patients 07002I M S Darmana, N W Rusni and S MasyeniPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819707002PDF (212.6 KB) References
Open Access
Statin and anemia in chronic kidney disease (CKD): an experimental study 07003P N Cahyawati, A A S A Aryastuti, M B T Ariawan, N Ar�an and Ngatidjan NgatidjanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819707003PDF (281.5 KB) References
Open Access
Adverse event of antiepileptic drugs: a cross sectional study 07004P A N K Permatananda, E Kristin, D Endharti, R T Pinzon and I K SumadaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819707004PDF (223.2 KB) References
Open Access
Tumour necrosis factor-alpha level among travellers contracted with dengue virus in Bali 07005N W Widhidewi, S Masyeni and H SukmawatiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819707005PDF (216.7 KB) References
Open Access
A model con�rmatory of adherence behavior with standard medication treatment among patients with asthma in Medan-Indonesia07006
Arlinda Sari Wahyuni, Rozaimah Zain Hamid, Tamsil Sya�uddin, Adang Bachtiar, Sake Juli Martina and Rina AmeliaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819707006PDF (374.5 KB) References
Open Access
Antidiabetic activity of musa acuminata colla fruit peel (MACFP) ethanol extract in glucose-induced diabetic rats 07007Erza Genatrika, Visda Nila Happy Laksari and Tjiptasurasa TjiptasurasaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819707007PDF (231.5 KB) References
Open Access
E�ectivity comparison between aspirin, propolis, and bee pollen as an antiplatelet based on bleeding time taken on mice 07008Sake Juli Martina, Muhammad Luth�, Pradeepa Govindan and Arlinda Sari WahyuniPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819707008PDF (257.6 KB) References
- Mechanical EngineeringOpen Access
Frame modal analysis for an electric three-wheel vehicle 08001Faizal Arifurrahman, Indrawanto Indrawanto, Bentang Arief Budiman, Poetro Lebdo Sambegoro and Sigit Puji SantosaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708001PDF (567.9 KB) References
Open Access
Experimental investigation on the performance of residential air conditioning system using water condensate for subcooling 08002Kasni Sumeru, Triaji Pangripto Pramudantoro and Andriyanto SetyawanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708002PDF (267.7 KB) References
Open Access
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
Analysis of �ame stabilization limit in a cylindrical of step micro-combustor with di�erent material through the numerical simulation08003
Herman Saputro, Aris Purwanto, Laila Fitriana, Danar S Wijayanto, Valiant L P Sutrisno, Eka D Ariyanto, Marshal Bima, Yuda Pratama, Heri Juwantono,Tutuko Firdani et al. (2 more)Published online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708003PDF (549.7 KB) References
Open Access
Performance of LLBC-based rotor blade for low speed wind turbine 08004A. Setiawan, M. M. Al Gifari and I. HamidahPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708004PDF (301.2 KB) References
Open Access
Numerical simulation of �ame stabilization in meso-scale vortex combustion 08005Herman Saputro, Heri Juwantono, Husin Bugis, Danar Susilo Wijayanto, Laila Fitriana, Valiant Lukad Perdana, Aris Purwanto, Eka Dwi Arianto, Marshal Bima,Yudha Pratama et al. (2 more)Published online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708005PDF (739.4 KB) References
Open Access
Study experimental of �ame-spread rate and spread limit distance of bio-solar droplets in microgravity combustion 08006Laila Fitriana, Bawono Widyo Gumelar, Herman Saputro, Tutuko Firdani, Riyadi Muslim, Hengky Aries Ismunandar, Rifqi Arif Zainudin, Rusdan Aditya Nugroho Aji,Revelation Rahmadi, Valiant L P Sutrisno et al. (2 more)Published online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708006PDF (354.4 KB) References
Open Access
The performance of up-draft gasi�er with various of air �ow rate in gasi�cation palm starch waste 08007Herman Saputro, Imam Muttaqin, Supriyadi Supriyadi, Vani Fadlullah, Laila Fitriana, Tutuko Firdani, Riyadi Muslim, Khani�udin Khani�udin, Sri Lasmini, Valiant L PSutrisno et al. (2 more)Published online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708007PDF (328.1 KB) References
Open Access
The in�uence of the number of rotor blades on the performance of orthopter wind turbine 08008Rachmat Firdaus, Takahiro Kiwata, Koji Nagao and Takaaki KonoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708008PDF (456.1 KB) References
Open Access
Determining the energy demand towards sustainable machining of AISI 316L stainless steel 08009Rusdi Nur, Asmeati Sabir, Muhammad Arsyad Suyuti and Abdul SalamPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708009PDF (234.5 KB) References
Open Access
Improving PEM fuel cell performance using in-line triangular ba�es in triple serpentine �ow �eld 08010A'rasy Fahruddin, Djatmiko Ichsani and Fadlilatul TaufanyPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708010PDF (440.9 KB) References
Open Access
Experimental study e�ect of diameter and number of spray nozzle holes on counter�ow cooling tower to improve coolinge�ectiveness 08011A'rasy Fahruddin, Muslimin Muslimin, Ginanjar Deni Susilo and Ali AkbarPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708011PDF (374.8 KB) References
Open Access
Technical and economical feasibility analysis of photovoltaic power installation on a university campus in indonesia 08012Ruben Bayu Kristiawan, Indah Widiastuti and Suharno SuharnoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708012PDF (485.9 KB) References
Open Access
Investigation on the improvement of car air conditioning system performance using an ejector 08013Enang Suma Ari�anto, Ega Taqwali Berman and Mutau�q Mutau�qPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708013PDF (323.4 KB) References
Open Access
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
Application of green building concept in the basement area of indonesia computer university 08014Herman S. Soegoto and Wanita Subadra AbiosoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708014PDF (452.5 KB) References
Open Access
CFD analysis of number of blades on the performance of counter rotating wind turbine designed using blade element momentumtheory under transient condition 08015Didit Setyo Pamuji and Muhammad Agung BramantyaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708015PDF (633.8 KB) References
Open Access
The e�ects of surface tension on the spreading ratio during the impact of multiple droplets onto a hot solid surface 08016Ra�l Arizona, Teguh Wibowo, Indarto Indarto and Deendarlianto DeendarliantoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708016PDF (710.9 KB) References
Open Access
Numerical studies in�uence con�guration fairing �ap track airfoil type naca 4412 and naca 6412 character unmanned aerial vehicle(UAV) 08017Handrico Ramelan Pratama and Muhammad Agung BramantyaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708017PDF (420.9 KB) References
Open Access
Energy and exergy analysis of dry-steam geothermal power plant: Case study in kamojang geothermal power plant unit 2 08018Nova Dany Setyawan, Nugroho Agung Pambudi, Frandhoni Utomo, Herman Saputro, Reza Adiprana, Lip Huat Saw, Mert Gürtürk and Bayu RudiyantoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708018PDF (455.9 KB) References
Open Access
Numerical study of e�ect of cooling channel con�guration and size on the product cooling e�ectiveness in the plastic injection molding08019
Angger Bagus Prasetiyo and Fauzun FauzunPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708019PDF (392.7 KB) References
Open Access
Measurement of pressure wave speed in stainless-steel pipe generated by water hammer 08020Ignatius Pulung Nurprasetio, Bentang Arief Budiman, Farid Triawan and Muhammad Ha�dPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819708020PDF (660.0 KB) References
- Chemical EngineeringOpen Access
The morphology and �ltration performances of poly(ether sulfone) membrane fabricated from di�erent polymer solution 09001Afrillia Fahrina, Teuku Maimun, Syarifah Humaira, Cut Meurah Rosnelly, Mirna Rahmah Lubis, Intan Bahrina, Rahmat Sunarya, Ahmad Ghufran andNasrul ArahmanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819709001PDF (678.0 KB) References
Open Access
The classi�cation of arabica gayo wine co�ee using UV-visible spectroscopy and PCA-DA method 09002Diding Suhandy and Meinilwita YuliaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819709002PDF (474.9 KB) References
Open Access
Identi�cation of fresh and expired ground roasted robusta co�ee using UV-visible spectroscopy and chemometrics 09003Meinilwita Yulia and Diding SuhandyPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819709003PDF (496.8 KB) References
Open Access
Production of clean synthetic gas from palm shell in a �xed bed gasi�er with recycle system of producer gas 09004Sunu Herwi Pranolo, Muhammad Tasmiul Khoir and Muhammad Fahreza PradhanaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819709004PDF (376.3 KB) References
Open Access
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
Kinetics study on non-isothermal thermochemical liquefaction of corncobs in ethanol-water solution: E�ect of ethanol concentration09005
Bregas Siswahjono Tatag Sembodo, Hary Sulistyo, Wahyudi Budi Sediawan and Mohammad FahrurroziPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819709005PDF (521.6 KB) References
Open Access
Low cost carbon electrodes to produce salinity gradient energy using reverse electrodialysis membranes: E�ect of feed �ow velocitiesand addition of Mg2+ 09006Tsalis Wahyu Najmiyah, Lina Aziyah, Yusuf Hendrawan, Dewi Maya Maharani, La Choviya Hawa and Yusuf WibisonoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819709006PDF (540.9 KB) References
Open Access
The in�uences of polydopamine immersion time on characteristics and performance of polyvinylidene �uoride ultra�ltrationmembrane 09007Syawaliah Syawaliah, Nasrul Arahman, Medyan Riza and Sri MulyatiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819709007PDF (429.1 KB) References
Open Access
Coconut husk ash as heterogenous catalyst for biodiesel production from cerbera manghas seed oil 09008Husni Husin, Abubakar Abubakar, Suci Ramadhani, Cici Ferawati Br. Sijabat and Fikri Has�taPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819709008PDF (395.7 KB) References
Open Access
Synthesis of silica of rice husk modi�cation (3-aminopropyl) trietoxysilane for adsorption methylene blue 09009Yusmaniar Yusmaniar, Darsef Darwis, Afrizal Afrizal and Annisa AnnisaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819709009PDF (396.9 KB) References
- Civil EngineeringOpen Access
Spectral displacement (SD) of banda aceh’s soft soil for seismic vulnerability assessment 10001Tau�q Saidi, Teuku Budi Aulia, Bambang Setiawan, Nora Abdullah and Muttaqin HasanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819710001PDF (435.6 KB) References
Open Access
Site response analysis for estimating seismic site ampli�cation in the case of Banda Aceh - Indonesia 10002Halida Yunita, Bambang Setiawan, Tau�q Saidi and Nora AbdullahPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819710002PDF (635.2 KB) References
Open Access
Proposing mathematical model for seawater intrusion phenomena in the coastal aquifer 10003Ngakan Putu Purnaditya, Herr Soeryantono and Dwinanti Rika MarthantyPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819710003PDF (265.3 KB) References
Open Access
Estimating the normal duration using normal Production Rate per Day (PRPD) of project activity 10004Fachrurrazi Fachrurrazi, Abdullah Abdullah, Yuwaldi Away and Teuku Budi AuliaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819710004PDF (482.0 KB) References
Open Access
Development risk analysis method for tsunami disaster 10005Purnawan Purnawan, Vera Surtia Bachtiart and Titi KurniatiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819710005PDF (422.3 KB) References
Open Access
Technical feasibility analysis of reservoir on agricultural area 10006Sulwan PermanaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819710006PDF (234.1 KB) References
- Electrical EngineeringOpen Access
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
E�ect of indirect lightning strike to 66kV transmission line in Java-Bali system 11001Aristo Adi Kusuma, Putu Agus Aditya Pramana, Brian Bramantyo S.D.A. Harsono and Buyung So�arto MunirPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711001PDF (742.4 KB) References
Open Access
A case study of mutual current e�ect on circulating current protection system 11002Kevin Gausultan Hadith Mangunkusumo, Aristo Adi Kusuma and Buyung So�arto MunirPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711002PDF (333.9 KB) References
Open Access
Covered conductor burn-down prevention for distribution line in Indonesia 11003Putu Agus Aditya Pramana, Aristo Adi Kusuma, Buyung So�arto Munir and Handrea Bernando TambunanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711003PDF (438.2 KB) References
Open Access
Investigation of transformer failure in Indonesia 11004Brian Bramantyo S.D.A. Harsono, Aristo Adi Kusuma, Buyung So�arto Munir and Nur Widi PriambodoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711004PDF (1.343 MB) References
Open Access
Electrical discharge phenomenon of electrode gaps in oil insulation 11005Jannus Maurits Nainggolan, MK Iwa Ganiwa, Chairul Hudaya and Amien RahardjoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711005PDF (546.8 KB) References
Open Access
A low cost 3D-printed robot joint torque sensor 11006Indrazno Siradjuddin, Rendi Pambudi Wicaksono, Anggit Murdani, Denda Dewatama, Ferdian Ronilaya, Erfan Rohadi and Rosa Andrie AsmaraPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711006PDF (361.0 KB) References
Open Access
Design and building motion capture system using transducer Microsoft kinect to control robot humanoid 11007Gun Gun Maulana, Yuliadi Erdani, Aris Budiyarto and Wahyudi PurnomoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711007PDF (603.0 KB) References
Open Access
Development of a secured room access system based on face recognition using Raspberry Pi and Android based smartphone 11008Asep Najmurrokhman, Kusnandar Kusnandar, Arief Budiman Krama, Esmeralda Contessa Djamal and Robbi RahimPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711008PDF (589.3 KB) References
Open Access
Design of the automatic shoe dryer 11009Ayu Latifah, Hilmi Aulawi and Muhammad Ali RamdhaniPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711009PDF (309.1 KB) References
Open Access
Eco-electric energy generator system using human exercise activities 11010Frans Setya Prabowo, Porman Pangaribuan and Denny DarlisPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711010PDF (424.5 KB) References
Open Access
Implementation of raindrops energy collector board using piezoelectric transducer 11011Eka De�yani, Porman Pangaribuan and Denny DarlisPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711011PDF (393.5 KB) References
Open Access
Parameters identi�cation BLDC motor: Instrumentations and transfer functions 11012Izza Anshory, Imam Robandi and Wirawan WirawanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711012PDF (312.7 KB) References
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
Open Access
Stabilising a cart inverted pendulum with an augmented PID control scheme 11013Indrazno Siradjuddin, Zakiyah Amalia, Budhy Setiawan, Ferdian Ronilaya, Erfan Rohadi, Awan Setiawan, Cahya Rahmad and Supriatna AdhisuwignjoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711013PDF (564.7 KB) References
Open Access
Analysis of the in�uence of the barrier against a range of active and passive RFID and its performance 11014Mochammad Junus, Tundung Subali Patma, Awan Setiawan, Arddy Awangga Kusuma and Isa MahfudiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711014PDF (585.8 KB) References
Open Access
Green energy harvesting from human footsteps 11015Putri Berlian Abadi, Denny Darlis and Mas Sarwoko SuraatmadjaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711015PDF (533.1 KB) References
Open Access
E�cient energy consumption for indoor mobile robot prototype under illumination 11016Seilla Angelina, Shofuro A�fah, Paramadina Susamti, Rizki Ardianto Priramadhi and Denny DarlisPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711016PDF (336.6 KB) References
Open Access
Empirical base solar re�ective array accumulator design simulator 11017Budhy Setiawan, Riska Nur Wakidah, P Raden Edy, D Annisa Maulidia, Yulianto Yulianto and Widjanarko WidjanarkoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711017PDF (449.4 KB) References
Open Access
Inverter using powerbank as power source with pure sine wave output 11018Muhammad Arif Wicaksono and Estananto EstanantoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711018PDF (339.2 KB) References
Open Access
Passive �lter design for reducing harmonics in light emitting diode bulb 11019Rambe Ali Hana�ah, Muhammad Safril and Suherman SuhermanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711019PDF (397.4 KB) References
Open Access
Wireless body area network's application for motion detection based on Android smartwatch 11020Eppy Yundra, Arif Widodo, Pradini Puspitaningayu and Unit Three KartiniPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711020PDF (408.8 KB) References
Open Access
Delay reduction of transmission control protocol in WiMAX by prioritizing the acknowledgement packets 11021Suherman SuhermanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711021PDF (361.7 KB) References
Open Access
Design and implementation of an automatic control for a laptop battery charger 11022Agus Ramelan, M Adli Rizqulloh and Dadang Lukman HakimPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711022PDF (328.9 KB) References
Open Access
E�ect of load current harmonics on vibration of three-phase generator 11023I Made Wiwit KastawanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711023PDF (481.7 KB) References
Open Access
Electret condenser microphone as a traditional Chinese medicine arterial pulse sensor 11024Erni Yudaningtyas, Waru Djuriatno, Achsanul Khabib and Dionysius J.D.H. SantjojoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819711024
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
PDF (312.2 KB) References
- Material EngineeringOpen Access
Simulation the e�ect of anode-cathode displacement and anode type on reinforced concrete cathodic protection using BEM 12001Syarizal Fonna, Syifaul Huzni, Muzaiyin Arika Putra and Rudi KurniawanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819712001PDF (416.2 KB) References
Open Access
Corrosion rate of AA 7050 in 3.5% NaCl environment with sodium chromate (Na2CrO4) inhibitor variation 12002
Pramesti A D Wulandari and M Noer IlmanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819712002PDF (332.6 KB) References
Open Access
Electric current e�ect on mechanical properties of SMAW-3G on the stainless steel AISI 304 12003Edi Widodo, Iswant Iswanto, Mirtza Adi Nugraha and Karyanik KaryanikPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819712003PDF (422.3 KB) References
Open Access
E�ects of stirring parameters on the rheocast microstructure and mechanical properties of aluminum alloy ADC12 12004Syaharuddin Rasyid, E�endy Arif, Hairul Arsyad and Muhammad SyahidPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819712004PDF (463.0 KB) References
Open Access
Cure characteristics, swelling behaviour and tensile properties of carbon black-�lled Natural Rubber (NR)/Chloroprene Rubber (CR)blends in the presence of alkanolamide 12005Indra Surya, Mimpin Ginting and Hana� IsmailPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819712005PDF (183.5 KB) References
Open Access
E�ects of alkanolamide addition on cure characteristics, crosslink density and tensile properties of carbon-black-�lled styrene-butadiene rubber compounds 12006Indra Surya and Hana� IsmailPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819712006PDF (176.5 KB) References
Open Access
The e�ects of welding current and purging gas on mechanical properties and microstructure of tungsten inert gas welded aluminumalloy 5083 H116 12007Ekak Novianto, Priyo Tri Iswanto and Mudjijana MudjijanaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819712007PDF (537.7 KB) References
Open Access
Problem solving in phase diagram of engineering material subject through animation as learning media 12008Mumu Komaro, Ariyano Ariyano, A Suherman and G F GeovaniPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819712008PDF (341.5 KB) References
- Environmental EngineeringOpen Access
Soil quality in corn cultivation using bamboo biochar, compost, and phonska 13001Yohanes P SitumeangPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713001PDF (199.3 KB) References
Open Access
The e�ectiveness of “Simantri” program in producing organic fertilizer and biourine to organic farming system in Bali, Indonesia 13002I D N Sudita, Y T L Suariani, I N Kaca and N M YudiastariPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713002PDF (198.7 KB) References
Open Access
Coastline change analysis and erosion prediction using satellite images 13003Putu Aryastana, I Made Ardantha and Kadek Windy CandrayanaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713003
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
PDF (364.0 KB) References
Open Access
Design of water hyacinth utilization as renewable electricity energy source in Tondano Lake 13004Herry Sumual, Felly Warouw and Marlon KamagiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713004PDF (216.9 KB) References
Open Access
The application of grey water recycling at Gayanti City Apartment, South Jakarta 13005A Muthiya, T Tazkiaturrizki and R RatnaningsihPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713005PDF (243.1 KB) References
Open Access
Mapping the potential of green energy to border societies of Indonesia and Timor Leste (a preliminary study) 13006Frederikus FiosPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713006PDF (170.8 KB) References
Open Access
Analysis of water quality in Maninjau Lake, West Sumatera, Indonesia using phytoplankton 13007Muhammad Arif Salsabil, Astri Rinanti and Melati Ferianita FachrulPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713007PDF (235.8 KB) References
Open Access
Potential of biomass residues from oil palm agroindustry in Indonesia 13008Dwi Ermawati Rahayu, Dutarama Nasarani, Wahyono Hadi and Budisantoso WrjodirjoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713008PDF (395.8 KB) References
Open Access
Design of drinkable tap water system at X Apartment, Jakarta 13009Hariastuti Prameswari, Tazkiaturrizki and R RatnaningsihPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713009PDF (213.7 KB) References
Open Access
Bioethanol production from mixed culture microalgae biomass with temperature hydrolysis variation 13010I Gede Aditya Juliarnita, Rositayanti Hadisoebroto and Astri RinantiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713010PDF (249.6 KB) References
Open Access
Increasing lipid content from biomass of microalgae to produce biofuels with optimization of nitrogen source 13011Istikhomah Putri Ayuwaningsih, Melati Ferianita Fachrul and Astri RinantiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713011PDF (254.5 KB) References
Open Access
Chlorpyrifos removal by Thiobacillus sp. and Clostridium sp. in liquid medium 13012Thalia Sunaryo, Hilarion Widyatmoko and Astri RinantiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713012PDF (306.0 KB) References
Open Access
Potential of indigenous bacteria to remove cyanide with variations of contact time and temperature 13013Kezia Eunike, Astri Rinanti and Ratnaningsih RatnaningsihPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713013PDF (209.9 KB) References
Open Access
Correlation of physics and chemical factors on phytoplankton distribution pattern in North Sunter Reservoir, Jakarta 13014Claudia Juliastutie, Astri Rinanti and Diana HendrawanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713014PDF (424.4 KB) References
Open Access
Utilization of solar energy for sea water and brackish water desalination using vacuum pressure and number of trays variations 13015Riana Ayu Kusumadewi, Suprihanto Notodarmodjo and Qomarudin Helmy
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
Published online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713015PDF (387.0 KB) References
Open Access
Removing cyanide by mixed culture at liquid media with variation in pH and cyanide concentration 13016Corry Valentina, Rositayanti Hadisoebroto and Astri RinantiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713016PDF (294.3 KB) References
Open Access
Validation of CO dispersion model due to the road position on the dominant wind direction on transport sector 13017Vera Surtia Bachtiar, Purnawan, Reri Afrianita and Randa AnugerahPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713017PDF (493.6 KB) References
Open Access
Starch producing in microalga biomass as a raw material for bioethanol 13018Fiona Putri, Mawar DS Silalahi and Astri RinantiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713018PDF (242.1 KB) References
Open Access
Increasing content of lipid in tropical microalgae Chlorella sorokiniana and Closterium sp. with variation of nitrogen content andextraction temperature 13019Amani Karima, Mawar DS Silalahi and Astri RinantiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713019PDF (253.4 KB) References
Open Access
Isolation and screening of resistant bacteria of heavy metal (Fe) at ship dismantling 13020Harmin Sulistiyaning Titah, Herman Pratikno, Atiek Moesriati, Rizky Islami Putera and Muhammad Fauzul ImronPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713020PDF (322.9 KB) References
Open Access
Utilisation of sustainable green energy in young generation 13021Yonik M Yustiani, Astri Hasbiah and Latifah MutmainahPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713021PDF (216.8 KB) References
Open Access
Simulation of e�ective volume increasement inside oxidation ditch reactor 13022Rositayanti Hadisoebroto, Yazid Bindar and Suprihanto NotodarmojoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713022PDF (449.7 KB) References
Open Access
Sustainable smart forest monitoring system for burning forest and deforestation detection 13023Denny Darlis, Dion Saputra Parulian Sirait and Dimas Bayu MaulanaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713023PDF (672.2 KB) References
Open Access
Environmental education model in non-formal education at coastal community based on resilience and social ecological systems13024
Samadi Samadi and Dwi Sukanti LestariningsihPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819713024PDF (253.5 KB) References
- Industry EngineeringOpen Access
E�ect of work posture on operator complaints: Choice between sitting and standing work 14001Anizar Anizar, Rahmi M Sari, Khalida Syahputri, Indah Rizkya and Nurul AtikahPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819714001PDF (384.4 KB) References
Open Access
Three-stage �ow-shop scheduling model with batch processing machine and discrete processing machine 14002Yusuf MauluddinPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819714002PDF (467.3 KB) References
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
Open Access
Supply chain management of co�ee commodities 14003Andri IkhwanaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819714003PDF (261.3 KB) References
Open Access
Application of lean manufacturing method and BLOCPLAN algorithm for productivity improvement of a laundry soap bar production14004
Ukurta Tarigan, Uni Pratama P Tarigan and Akbar Rizky RifangiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819714004PDF (607.8 KB) References
Open Access
Storage design using Fast moving, Slow moving and Non moving (FSN) analysis 14005Mangara M Tambunan, Khalida Syahputri, Indah Rizkya, Rahmi M Sari and Muhammad D CahyoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819714005PDF (515.0 KB) References
Open Access
Design of facility layout with lean service and market basket analysis method to simpli�cation of service process in the supermarket14006
Ukurta Tarigan, Uni Pratama P Tarigan, Intan Hartanti Rahman and Indah RizkyaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819714006PDF (366.8 KB) References
Open Access
Quality engineering of crumb rubber by minimizing rework using fuzzy FMEA 14007Khalida Syahputri, Jelly Leviza, Rahmi M Sari, T Indah Rizkya, Ikhsan Siregar and Mangara M TambunanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819714007PDF (212.4 KB) References
Open Access
Optimization of saving production cost in plastic jute sacks with dynamic programming 14008Rahmi M Sari, Mangara M Tambunan, Khalida Syahputri, Anizar Anizar, Ikhsan Siregar and T Indah RizkyaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819714008PDF (204.8 KB) References
Open Access
Analysis of the decision on the fresh milk�sh purchase by using Analytic Hierarchy Process method (AHP) 14009Ribangun Bamban Jakaria and Wiwik SulistiyowatiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819714009PDF (286.1 KB) References
Open Access
Assembly line balancing in an electronics company using simulation approach 14010Khalida Syahputri, Jelly Leviza, Sari Sari, Rizkya T Indah, Humala Napitupulu and Anizar AnizarPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819714010PDF (315.6 KB) References
Open Access
A shortest route metaheuristic method for oil palm Fresh Fruit Bunch (FFB) transportation based on genetic algorithm: A case study inPTPN III Indonesia 14011Meilita Tryana Sembiring, M Zaky Hadi, Jessica Tanuwijaya and Irwan BudimanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819714011PDF (439.8 KB) References
Open Access
Redesigning layout in the palm oil tank plant to enhance the utility 14012Anita Christine Sembiring, Irwan Budiman and Hardianta TariganPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819714012PDF (609.6 KB) References
Open Access
Design control system of auto air remaining machine based on programmable logic controller in the automotive manufacturingindustry 14013Syahril Ardi and Laurentia Tricilya CascarinePublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819714013PDF (297.1 KB) References
Open Access
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
Design of pokayoke system on the process of mounting actuator bracket based on programmable logic controller in automotivemanufacturing industry 14014Syahril Ardi, Muhammad Abdul Rahman Nurdin and Agus PoncoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819714014PDF (279.3 KB) References
- Information EngineeringOpen Access
C2C marketplace model in �shery product trading application using SMS gateway 15001Dwi Ely Kurniawan, Nur Zahrati Janah, Ari Wibowo, Mir'atul Khusna Mu�da and Purwono PrasetyawanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819715001PDF (474.8 KB) References
Open Access
The controlling and monitoring system in oyster mushroom cultivation using fuzzy logic through web technology integrated withInternet of Things 15002Muhammad Priyono Tri Sulistyanto, Wahyudi Harianto, Danang Adi Nugroho, Rio Eka Retandi, Aji Kusuma Akbar and Prantasi Harmi TjahjantiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819715002PDF (489.2 KB) References
Open Access
Physical design development for evaluate digital library application based on modi�ed CSE-UCLA with weighted product 15003Dewa Gede Hendra Divayana, P. Wayan Arta Suyasa and Ida Bagus Gede Surya AbadiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819715003PDF (348.2 KB) References
Open Access
The evaluation on a mobile augmented reality application as therapy media 15004Hendra Pradibta, Indra Dharma Wijaya, Ferdian Ronilaya and Usman NurhasanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819715004PDF (423.5 KB) References
Open Access
Flashcard computer generated imagery medicinal plant for orthopedagogic education 15005Rohman Dijaya, Noor Mayaminiy Maulidah and Dahlan AbdullahPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819715005PDF (350.8 KB) References
Open Access
Comparative Study of Gait Gender Identi�cation using Gait Energy Image (GEI) and Gait Information Image (GII) 15006Rosa Andrie Asmara, Irtafa Masruri, Cahya Rahmad, Indrazno Siradjuddin, Erfan Rohadi, Ferdian Ronilaya, Anik Nur Handayani and Qonitatul HasanahPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819715006PDF (296.8 KB) References
Open Access
Mobile Braille Touch Application for Visually Impaired People using Double Diamond Approach 15007Rony Aldhea Dwi Cahya, Anik Nur Handayani and Aji Prasetya WibawaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819715007PDF (537.6 KB) References
Open Access
False Color Photography E�ect using Hoya UV&IR Cut Filters Feature White Balance 15008Setya Chendra Wibawa, Asep Bayu Dani Nandyanto, Dodik Arwin Dermawan, Alim Sumarno, Naim Rochmawati, Dewa Gede Hendra Divayana andAmadeus BonaventuraPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819715008PDF (412.6 KB) References
Open Access
Decision Support System for Islamic Couple Selection Using Fuzzy-AHP and WSM Method Based Web 15009Yulian Findawati, Nadifatul Qomariyah, Arif Senja Fitroni and Dahlan AbdullahPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819715009PDF (238.2 KB) References
Open Access
Quality of Service Assurances in Multimedia Network: A Simulation Approach 15010Suartana I Made and Prapanca AdityaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819715010PDF (341.5 KB) References
Open Access
Exploring Computational Thinking to Improve Energy-E�cient Programming Skills 15011Yeni Anistyasari, Ekohariadi and Ari Kurniawan
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
Published online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819715011PDF (357.4 KB) References
- Computer and Communication EngineeringOpen Access
Augmented reality of traditional food for nutrition education 16001Cica Yulia, H Hasbullah, E.E. Nikmawati, S.R. Mubaroq, Cep Ubad Abdullah and Isma WidiatyPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819716001PDF (333.4 KB) References
Open Access
Virtual gasoline engine based on augment reality for mechanical engineering education 16002Dede, Ade Gafar Abdullah, Budi Mulyanti and Dedi RohendiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819716002PDF (292.9 KB) References
Open Access
Prototyping of Flooding Early Warning System using Internet of Things Technology and Social Media 16003Aris Haris Rismayana, Castaka Agus Sugianto and Ida Bagus BudiyantoPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819716003PDF (575.3 KB) References
Open Access
Design of Android Interactive Multimedia for the Concept of Aromatic Compound 16004Laely Amaliyah, Ferli Septi Irwansyah, Neneng Windayani and Muhammad Ali RamdhaniPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819716004PDF (357.3 KB) References
Open Access
A Slack-Based Measures within Group Common Benchmarking using DEA for Improving the E�ciency Performance of Departments inUniversitas Malikussaleh 16005Dahlan Abdullah, Muhammad Zarlis, Darmawan Napitupulu, Hartono Hartono, S Sriadhi, Cut Ita Erliana, Rohman Dijaya, Yulian Findawati, Heri Nurdiyanto et al. (2more)Published online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819716005PDF (250.0 KB) References
Open Access
The user interface design for natural science learning media for elementary school 16006Ridho Hakiki, Danang Junaedi and Emil Robert KaburuanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819716006PDF (300.3 KB) References
Open Access
Analysis and Implementation of Goal-Directed Design in Reproductive Health Learning Media for High School Student Case Study:Mitra Citra Remaja (MCR) 16007David Meulana Abidin, Danang Junaedi and Indra Lukmana SardiPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819716007PDF (339.6 KB) References
Open Access
Designing an interactive learning application for ADHD children 16008Dian Kusumasari, Danang Junaedi and Emil Robert KaburuanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819716008PDF (369.6 KB) References
Open Access
Designing user interface on monopoly game application for learning fraction in elementary school by using goal directed designmethod 16009Ariningtyas Priyahita Istiqomah, Danang Junaedi and Emil Robert KaburuanPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819716009PDF (315.9 KB) References
- ArchitectureOpen Access
The River Settlement: Tree House as a solution safe from �oods 17001Vera Nur Nabillah, Azka Intasan, Esti Destikarani and M. Syaom BarlianaPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819717001PDF (326.0 KB) References
Open Access
Alternative solution for deforestation: under soil house as architecture experimental design 17002Farouk Irfan Almunir, Hena Safna Federlina, M. Syaom Barliana and Indah Susanti
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
Published online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819717002PDF (372.9 KB) References
Open Access
Open and Flowing: The Design of an Interactive Space at the Marketplace 17003Alfansyah Fauzy Prajawisastra, Tutin Aryanti and Restu MinggraPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819717003PDF (564.4 KB) References
Open Access
Deployable structure as architectural active structure on sports building in Bandung 17004Hafshah Salamah, Andry Widyowijatnoko, Surjamanto Wonorahardjo and Rakhmat Fitranto AditraPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819717004PDF (587.0 KB) References
Open Access
Playful museum design: Bringing the display to reality and bringing the reality to display 17005Rahmadean A. Purwatiani, Tutin Aryanti and Restu MinggraPublished online: 12 September 2018DOI: https://doi.org/10.1051/matecconf/201819717005PDF (545.9 KB) References
MATEC Web of ConferenceseISSN: 2261-236X
Copyright / Published by: EDP Sciences
Mentions légales Contacts Privacy policy
By using this website, you agree that EDP Sciences may store web audience measurement cookies and, on some pages, cookies from social networks. More information and setup OK
MATEC Web of Conferences 197, 08009 (2018) https://doi.org/10.1051/matecconf/201819708009AASEC 2018
© The Authors, published by EDP Sciences. This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/).
*Corresponding author: [email protected]
Determining the energy demand towards sustainable machining of AISI 316L stainless steel
Rusdi Nur1,2,*, Asmeati Sabir3, Muhammad Arsyad Suyuti1, and Abdul Salam1 1Mechanical Engineering Department, Politeknik Negeri Ujung Pandang, 9024 Makassar South Sulawesi, Indonesia 2Centerof Materials and Manufacturing Engineering, Politeknik Negeri Ujung Pandang, 9024 Makassar South Sulawesi, Indonesia 3Study Program of Mechanical Engineering, Universitas Fajar, 90231 Makassar South Sulawesi, Indonesia
Abstract. Minimizing the energy demand of machining operations has become mainly in the manufacturing field; encouraged by the significantly increase in the energy cost and the environmental effects due to high levels of energy demand. The energy consumed to cutting operation in turning process was divided into two sections, i.e. the energy used to setup machine and the energy consumed to cutting process. The total energy demand of machining process can be estimated with prediction equations based on material removal rate (MRR) and cutting force. This paper aims to promote an approach to predict and calculated the total energy demand of cutting operation performing the sustainable in turning process. The results presented that the estimated of energy demand values are almost similar to the actual values about 7.3 percent than the actual energy demand.
1 Introduction Consumption of natural resources and pollution resulting from the life of technical products has become a global environmental problem and has resulted in increased political pressure and stronger regulation applied to producers and users of those products [1]. The existence of sustainable development activities in production has been adopted in a cost-effective route industry to improve economic, environmental, and social performance.
Sustainable production as a problem solving in dealing issues of higher energy demand and costs, including applicable in the fields of engineering, such as the machining process [2]. In the sustainable production, reduction of energy consumption becomes an important consideration in addressing the issue of energy [3, 4].
In production processes, improving sustainability performance and saving money can be performed by minimizing energy demand. The production process highly requires the energy, and production is also integrated with machinery. Thus, the reduction of energy demand to generate parts can be contributed by reducing energy demand in machinery.
A prerequisite in targeting energy reduction in a machining process is the capability to determine the total energy used during machining. This identification of energy usage in a machining process can be done by studying a particular machining process in detail [5]. Previous works on identifying the machining process and deriving the calculation for total energy demand were reported by Rajemi et al. [4] and He et al. [6], to name some. The first stated that total energy during machining is the sum of the energy consumed by the machine during
setup processing, during cutting process, during tool change, and to produce a cutting tool and normalized per cutting edge. The last observed that total energy was from constant energy demand (corresponding to idle condition) and from variable energy consumption (related to cutting power). In this paper, the first approach is used. The machining process studied is turning of hardened steel under dry condition (no cutting fluid). The cutting tool used is carbide insert, which means the machining process is in extreme range of its capability [7]. The energy calculated is total energy consumed in machining the hardened steel starting from the beginning of cutting process (when the tool is still fresh) until the cutting tool reaches its tool life.
In this paper, the energy demand of turning process is investigated by using three methods. The experimental was performed on the turning of AISI 316L austenitic stainless steel.
2 Determining Energy Demand
The energy demand in turning process can be obtained using the measuring the power meter includes voltage, current, power and energy demand. Furthermore, the total of energy demand (E) can be formulated using a modified equation [4], as following equation:
E = E1 + E2 + E3 + E4 (1)
The energy consumed during the setup processing as E1, during the cutting operation as E2, for changing a tool as E3, and for resulting cutting tools as E4. In this paper, the energy used to cutting process for calculation of
2
MATEC Web of Conferences 197, 08009 (2018) https://doi.org/10.1051/matecconf/201819708009AASEC 2018
energy consumption, namely EC. Thus, equation (1) can be modified as below:
EC = E1 + E2 (2) E1 is the energy that is used to setup operation and can be formulated from the amount of power demand during timing setup, as shown in the equation:
E1 = P0 t1 (3)
whereP0, namely idle power, is the power required for devices to support the machine, such as the computer and fans, motor, coolant pump etc. The power required by a machine tool using a three-phase motor, Po, is formulated as follow [8]:
P0= VI √3 Cos (4)
whereV, is the voltage, I is the current [A], and Cos is the power factor (0.8 – 1.0). The value of V and I can be obtained from the machining data that shown in the control panel of CNC lathe machine, t1 is the time needed to setup the machine [s]. E2 is the energy demand during cutting process and can be formulated by the power engine module for removing material, as developed by [9] in equation below.
E2 = (P0 + k�̇�𝑣) t2 (5)
where (P0 + k�̇�𝑣) can defined as the electrical power required (P) for machining [9] with following equation below:
P = P0+ k �̇�𝑣 (6)
where, P is the power [W] consumed by machining process, P0is the power [W] consumed by all machine modules for a machine operating without loading, k is the specific energy requirement [Ws/mm3] in cutting operations (Table 1), and�̇�𝑣 is the material removal rate (MRR), in [mm3/s] which can be calculated as follows:
�̇�𝑣 = 𝑉𝑉𝐶𝐶 ∙ 𝑓𝑓 ∙ 𝑎𝑎𝑝𝑝 (7)
wheref is the rate of feeds (mm/rev) and Vc is the cutting speed (m/min), and ap isthe depth of cut (mm).
Table 1. Energy specific for Cutting (k).
Material k value [Ws/mm3] Aluminum alloy 0.4 – 1.0 Cast iron 1.1 – 5.4 Copper iron 1.4 – 3.2 High-temperature alloy 3.2 – 8.0 Magnesium alloy 0.3 – 0.6 Nickel alloy 4.8 – 6.7 Refractory alloy 3 – 9 Stainless steel 2 – 5 Steels 2 – 9 Titanium alloy 2 – 5
Value of (k�̇�𝑣) can be summarized as the cutting power.
Thus, the above equation for the total power consumption in cutting process (Pt) was assumed as follow:
P = P0 + PC (8)
where Pcis the cutting power which is the product of cutting force and cutting speed [10, 11] :
PC = FCVC (9)
whereVc was cutting speed (m/min), and Fc was cutting force that supplies the energy needed for the cutting operation. Thus, the cutting process have an equation as follow:
P = P0 + (FCVC) (10)
As described in equation 1, the energy requirement for the machining process can be summarized based on the cutting force and the cutting power (measured by using power meter) with following equation:
E2 = (P0 + FC VC) t2 (11)
E2 = (P0 + PC) t2 (12)
Based on theequation 2, theenergy consumed for cutting process can be calculated by equation below:
EC = P0 t1 + (P0 + Pc) t2 (13)
EC = P0 t1 + (P0 + k �̇�𝑣) t2 (14)
EC = P0 t1 + (P0 + Fc Vc) t2 (15)
3 Experimental Setup In this paper, the turning process was performed using the ALPHA 1350S 2-axis CNC lathe machine (100 - 6000 rpm of spindle speed ranges and 8.3 kW of horse power and) under without cooling conditions using uncoated carbide tool (Mitsubishi’s UTi20T) with featured 0.8 mm nose radius and designated as TCLNR 2020K12. The cutting parameters were selected after the recommendations given by the tool’s manufacturer. The criteria of tool life were adjusting at 0.2 mm of maximum flank wear width or until the tool was severely damage.
The workpiece material used in the turning process was AISI 316L austenitic stainless steel, with a diameter of 150 mm and length of 300 mm. The composition of AISI 316L was detailed in Tables 2.
Table 2. Composition of AISI 316L.
Composition Min Max C - 0.03
Mn - 2.00 Si - 0.75 P - 0.05 S - 0.03 Cr 16 18.00 Mo 2 3.00 Ni 10 14.00 N - 0.10
The experimental setup was developed using nine
experiments as shown in Table 3. It was conducted to repetition for each parameter.
3
MATEC Web of Conferences 197, 08009 (2018) https://doi.org/10.1051/matecconf/201819708009AASEC 2018
Table 3. Cutting parameters.
Levels Low Centre High Cutting speed (m/min) 90 150 210 Feed (mm/rev) 0.10 0.16 0.22 Depth of cut (mm) 0.4 Coolant No Fluid
4 Results and discussion The energy demand was calculated by using Equation 13 to 15. The calculation results for energy demand based on experimental, cutting force and material removal rate (MRR) are shown in Figures 1, 2 and 3 for feeds of 0.10, 0.16 and 0.22 mm/rev respectively.
Fig. 1.Plotting energy demand for 0.10 mm/rev of feed in different of cutting speeds.
Fig. 2.Plotting energy demand for 0.16 mm/rev of feed in different of cutting speeds
Fig. 1.Plotting energy demand for 0.22 mm/rev of feed in different of cutting speeds
Figures 1, 2 and 3 illustrate further comparison between the actual based on experiments and the estimated energy demand based on cutting force and material removal rate. All estimated energy demand values of the cutting operations are almost similar to the actual values, and the estimated value of the total energy demand is average difference of 7.3 percent than the actual one. In machining processes especially CNC machining, the energy demand that required was dominantly influenced by cutting parameters i.e. speed of cutting, feed rate and depth of cut. The cutting speed was more significant for the energy demand than feed rate. It found that the increasing cutting speed will be increase the energy demand.
These results were confirmed by Velchev et al [12], their study presented that the increasing cutting speed decreases the energy demand when turning of steel 17G2SAF using insert grade GC4235. Nur et al. [13,14] also investigate the turning of AISI 316L stainless steel using coated carbide, they concluded that the equations prediction developed for machining output can be useful in determining the optimum cutting parameters. Another study was conducted by Nur et al. for turning of aluminum alloys [15-17] and carbon steel [18-19]. The research result stated that the energy demand was influenced by cutting speed. Increasing the cutting speed will decrease energy demand, because the cutting process was faster.
5 Conclusions In this paper, the turning of AISI 316L stainless steel using an uncoated cemented carbide was studied and concluded as following results: The energy demand was significantly affected by the
cutting speed as compared with feeds. Increasing the cutting speed can be decrease the
energy demand for particular machining, it is due to shorter the cutting time during the machining process.
Determining the energy demand in the machining process can be performed with the three approaches, namely: direct measurement in the experiments, calculations using data cutting force and MRR.
0
10
20
30
40
50
90 150 210
Ener
gy d
eman
d (k
Wh)
Cutting Speed (mm/min)
Ec based Exp.Ec based FcEc based MRR
0
10
20
30
40
50
90 150 210
Ener
gy d
eman
d (k
Wh)
Cutting Speed (mm/min)
Ec based Exp.Ec based FcEc based MRR
0
10
20
30
40
50
90 150 210
Ener
gy d
eman
d (k
Wh)
Cutting Speed (mm/min)
Ec based Exp.Ec based FcEc based MRR
4
MATEC Web of Conferences 197, 08009 (2018) https://doi.org/10.1051/matecconf/201819708009AASEC 2018
We would like to acknowledge to Politeknik Negeri Ujung Pandang for the registration and we are also thankful to Center of Materials and Manufacturing of PoliteknikNegeri Ujung Pandang for supporting the research.
References 1. Jegatheesan, V., J.L. Liow, L. Shu, S.H. Kim, and C.
Visvanathan. J. of Cleaner Prod. 17(7): 637-643. (2009)
2. Hanafi, I., A. Khamlichi, F.M. Cabrera, E. Almansa, and A. Jabbouri. J. of Cleaner Prod.33: 1-9.(2012)
3. Park, C.-W., K.-S. Kwon, W.-B. Kim, B.-K. Min, S.-J. Park, I.-H. Sung, Y. Yoon, K.-S. Lee, J.-H. Lee, and J. Seok. Inter. J. of Prec. Eng. and Manuf. 10(5): 151-173.(2009)
4. Rajemi, M.F., P.T. Mativenga, and A. Aramcharoen. J. of Cleaner Prod. 18(10-11): 1059-1065.(2010)
5. Chapman, P.F. Energy Policy. 2(2): 91-103.(1974) 6. He, Y., B. Liu, X. Zhang, H. Gao, and X. Liu., J. of
Cleaner Prod.23(1): pp. 167-174.(2012) 7. Noordin, M.Y., D. Kurniawan, Y.C. Tang, and K.
Muniswaran. Inter. J. of Adv. Manuf. Tech.60(9-12): 853-863.(2012)
8. John, P. 1st ed. New York: McGraw-Hill Co. Inc.(2000)
9. Gutowski, T., J. Dahmus, and A. Thiriez. 13th CIRP Inter. Conf. on Life Cycle Eng. (2006)
10. Kalpakjian, S. and S. Schmid. 4th ed. London: Prentice-Hall Inter. (UK) Ltd. (2001)
11. Astakhov, V.P. and X. Xiao. Mach. Sci. and Tech. 12(3): 325-347. (2008)
12. Velchev, S., I. Kolev, K. Ivanov, and S. Gechevski, J. of Cleaner Prod. 80: pp. 139-149. (2014)
13. Nur, R., M. Noordin, S. Izman, and D. Kurniawan. Procee. of the Inst. of Mech. Eng., Part E: J. of Pro. Mech. Eng.. 231 (4) : 676-683. (2017)
14. Nur, Rusdi. J.Eng. App. Sci. ARPN 12 (6): 1885-1889. (2017)
15. Nur, Rusdi, D. Kurniawan, M. Y. Noordin, and S. Izman. Proc. Manuf. 2: 558-562. (2015)
16. Nur, Rusdi, M. Y. Noordin, S. Izman, and Denni Kurniawan. Adv. Mater. R., 845:799-802. (2014)
17. Nur, Rusdi, Muhammad Arsyad Suyuti, and Tri Agus Susanto. AIP Conf. Proc.1855: 020002. (2017)
18. Susanto, Tri Agus, and Rusdi Nur. IOP Conf. Series: Mater. Sci. & Eng.191 (1): 012028. (2017)
19. Nur, Rusdi, Muhammad Arsyad Suyuti, and Tri Agus Susanto. AIP Conf. Proc.1855 (1): 020002. (2017)
also developed by scimago: SCIMAGO INSTITUTIONS RANKINGS
Scimago Journal & Country Rank
Home Journal Rankings Country Rankings Viz Tools Help About Us
MATEC Web of ConferencesCountry France - SIR Ranking of France 12
H Index
Subject Area and Category Chemistry Chemistry (miscellaneous)
Engineering
Engineering (miscellaneous)
Materials Science Materials Science (miscellaneous)
Publisher
Publication type Conferences and Proceedings
ISSN 2261236X
Coverage 2012-ongoing
Join the conversation about this journal
Enter Journal Title, ISSN or Publisher Name
SJR
The SJR is a size-independent prestige indicator thatranks journals by their 'average prestige per article'. It isbased on the idea that 'all citations are not createdequal'. SJR is a measure of scienti�c in�uence ofjournals that accounts for both the number of citationsreceived by a journal and the importance or prestige ofthe journals where such citations come from Itmeasures the scienti�c in�uence of the average article
Citations per document
This indicator counts the number of citations received bydocuments from a journal and divides them by the totalnumber of documents published in that journal. Thechart shows the evolution of the average number oftimes documents published in a journal in the past two,three and four years have been cited in the current year.The two years line is equivalent to journal impact factor™ (Thomson Reuters) metric.
Cites per document Year ValueCites / Doc. (4 years) 2012 0.000Cites / Doc. (4 years) 2013 0.077Cites / Doc. (4 years) 2014 0.053Cites / Doc. (4 years) 2015 0.125Cites / Doc. (4 years) 2016 0.212Cites / Doc. (4 years) 2017 0.243Cites / Doc. (3 years) 2012 0.000Cites / Doc. (3 years) 2013 0.077Cites / Doc. (3 years) 2014 0.053Cites / Doc. (3 years) 2015 0.125
Total Cites Self-Cites
Evolution of the total number of citations and journal'sself-citations received by a journal's publisheddocuments during the three previous years.
Journal Self-citation is de�ned as the number of citationfrom a journal citing article to articles published by thesame journal.
Cites Year ValueS lf Cit 2012 0
2013 2014 2015 2016 2017
0.1
0.125
0.15
0.175
Cites / Doc. (4 years)Cites / Doc. (3 years)Cites / Doc. (2 years)
2012 2013 2014 2015 2016 2017
0
0.06
0.12
0.18
0.24
0.3
2012 2013 2014 2015 2016 2017
0
700
1.4k
Aprisal 2 weeks ago
We hope matec web of conferences continue ongoing in Scopus
reply
ardalan 5 months ago
hi. any information about the quality and strength of Conferences and Proceedings ?
reply
External Cites per Doc Cites per Doc
Evolution of the number of total citation per documentand external citation per document (i.e. journal self-citations removed) received by a journal's publisheddocuments during the three previous years. Externalcitations are calculated by subtracting the number ofself-citations from the total number of citations receivedby the journal’s documents.
Cit Y V l
% International Collaboration
International Collaboration accounts for the articles thathave been produced by researchers from severalcountries. The chart shows the ratio of a journal'sdocuments signed by researchers from more than onecountry; that is including more than one country address.
Year International Collaboration2012 36.112013 21 49
Citable documents Non-citable documents
Not every article in a journal is considered primaryresearch and therefore "citable", this chart shows theratio of a journal's articles including substantial research(research articles, conference papers and reviews) inthree year windows vs. those documents other thanresearch articles, reviews and conference papers.
Documents Year ValueN it bl d t 2012 0
Cited documents Uncited documents
Ratio of a journal's items, grouped in three yearswindows, that have been cited at least once vs. thosenot cited during the following year.
Documents Year ValueUncited documents 2012 0Uncited documents 2013 102Uncited documents 2014 450Uncited documents 2015 956
← Show this widget inyour own website Just copy the code belowand paste within your htmlcode:
<a href="https://www.scimag
A
A
2012 2013 2014 2015 2016 2017
0
0.2
0.4
2012 2013 2014 2015 2016 2017
0
20
40
2012 2013 2014 2015 2016 2017
0
3k
6k
2012 2013 2014 2015 2016 2017
0
3k
6k
Documents
Nur, R.a b , Sabir, A.c , Suyuti, M.A.a , Salam, A.a
Determining the energy demand towards sustainable machining of AISI 316L stainless steel (2018) MATEC Web of Conferences, 197, art. no. 08009, .
DOI: 10.1051/matecconf/201819708009
a Mechanical Engineering Department, Politeknik Negeri Ujung Pandang, Makassar South Sulawesi, 9024, Indonesia
b Centerof Materials and Manufacturing Engineering, Politeknik Negeri Ujung Pandang, Makassar South Sulawesi, 9024,Indonesia
c Study Program of Mechanical Engineering, Universitas Fajar, Makassar South Sulawesi, 90231, Indonesia
Abstract Minimizing the energy demand of machining operations has become mainly in the manufacturing field; encouraged by the
significantly increase in the energy cost and the environmental effects due to high levels of energy demand. The energyconsumed to cutting operation in turning process was divided into two sections, i.e. the energy used to setup machine andthe energy consumed to cutting process. The total energy demand of machining process can be estimated with predictionequations based on material removal rate (MRR) and cutting force. This paper aims to promote an approach to predict andcalculated the total energy demand of cutting operation performing the sustainable in turning process. The results presentedthat the estimated of energy demand values are almost similar to the actual values about 7.3 percent than the actual energydemand. © The Authors, published by EDP Sciences, 2018.
Index Keywords
Austenitic stainless steel, Machining centers, Turning; AISI316L stainless steel, Cutting operations, Cuttingprocess, Machining operations, Machining Process, Manufacturing fields, Material removal rate, Prediction equations;Energy management
Correspondence Address
Nur R.; Mechanical Engineering Department, Politeknik Negeri Ujung PandangIndonesia; email: [email protected]
Editors: Nandiyanto A.B.D., Abdullah A.G. Publisher: EDP Sciences
ISSN: 2261236X
Language of Original Document: English Abbreviated Source Title: MATEC Web Conf.
2-s2.0-85053773592 Document Type: Conference Paper
Publication Stage: Final Source: Scopus
Access Type: Open Access
Copyright © 2019 Elsevier B.V. All rights reserved. Scopus® is a registeredtrademark of Elsevier B.V.
AASEC 2018 PROGRAM
TIME EVENT VENUE
WEDNESDAY, APRIL 18, 2018
07.00-08.00 Registration Registration Counter
16.45-17.30 Closing Main Hall (Orchid 1-2)
10.00-12.00 Main Hall (Orchid 1-2)
09.45-10.00Chairman of AASEC
Rector of UPI
Main Hall (Orchid 1-2)
Keynote 1Dr. Abdullahkareem Shafiq
Taylor’s University Malaysia
Opening Ceremony
Plenary Session
Keynote 2Dr. Eng. Tedi Kurniawan
Universiti Malaysia Pahang
Keynote 3Dr. Lala Septem Riza
Universitas Pendidikan Indonesia
Keynote 4Dr. Eng. Topan Setiadiputra
National Nuclear Energy Agency
Keynote 5Dr. Eng. Farid TriawanTokyo Institute of Technology
Discussion
08.00-09.30 Parallel Session 1 Classroom 1-12
09.30-09.45 Coffee Break 1 Main Hall (Orchid 1-2)
13.00-15.00 Parallel Session 2 Classroom 1-12
12.00-13.00 Lunch and Pray Time Restourant andPrayer Room
15.00-15.30 Coffee Break 2 and Pray Time Main Hall (Orchid 1-2) Prayer Room
15.30-16.45 Parallel Session 3 Classroom 1-12
PARALLEL I SCHEDULE 08.00-09.30
PARALLEL II SCHEDULE 13.00-15.00
Room/ Topic
Venue Time
R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12
AS-01 AS-03 AS-04 AS-06 AS-09 EN-01 EN-02 EN-04 EN-06 EN-08 EN-09 EN-10
08.00-08.15 ABS-123
ABS-125
ABS-283
ABS-211
ABS-265
ABS-274
ABS-126
ABS-33
ABS-113
ABS-220
ABS-422
ABS-471
08.15-08.30 ABS-222
ABS-139
ABS-318
ABS-22
ABS-270
ABS-28
ABS-127
ABS-332
ABS-300
ABS-242
ABS-473
ABS-472
08.30-08.45 ABS-250
ABS-253
ABS-326
ABS-230
ABS-4
ABS-282
ABS-203
ABS-333
ABS-302
ABS-243
ABS-52
ABS-485
08.45-09.00 ABS-272
ABS-280
ABS-409
ABS-231
ABS-544
ABS-297
ABS-214
ABS-334
ABS-303
ABS-244
ABS-582
ABS-491
09.00-09.15 ABS-336
ABS-30
ABS-410
ABS-238
ABS-560
ABS-331
ABS-480
ABS-378
ABS-343
ABS-247
ABS-66
ABS-535
09.15-09.30 ABS-414
ABS-32
ABS-516
ABS-261
ABS-9
ABS-339
ABS-502
ABS-397
ABS-418
ABS-273
ABS-76
ABS-64
Room/ Topic
Venue Time
R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12
AS-01 AS-02
AS-03 AS-05 AS-06
AS-06 EN-01 EN-01 EN-01 EN-02 EN-03
EN-04 EN-07
EN-06 EN-07
EN-08 EN-10 EN-11 AS-08
13.00-13.15 ABS-434
ABS-37
ABS-286
ABS-262
ABS-131
ABS-346
ABS-74
ABS-407
ABS-537
ABS-3
ABS-218
ABS-122
13.15-13.30 ABS-83
ABS-38
ABS-287
ABS-264
ABS-169
ABS-416
ABS-509
ABS-411
ABS-70
ABS-301
ABS-284
ABS-387
13.30-13.45 ABS-100
ABS-380
ABS-342
ABS-278
ABS-189
ABS-436
ABS-515
ABS-423
ABS-533
ABS-365
ABS-295
ABS-389
13.45-14.00 ABS-263
ABS-41
ABS-441
ABS-351
ABS-2
ABS-445
ABS-530
ABS-48
ABS-266
ABS-437
ABS-348
ABS-461
14.00-14.15 ABS-294
ABS-428
ABS-109
ABS-430
ABS-226
ABS-449
ABS-539
ABS-487
ABS-308
ABS-454
ABS-386
ABS-484
14.15-14.30 ABS-356
ABS-482
ABS-111
ABS-456
ABS-228
ABS-458
ABS-24
ABS-513
ABS-325
ABS-490
ABS-398
ABS-191
14.30-14.45 ABS-361
ABS-496
ABS-19
ABS-492
ABS-239
ABS-464
ABS-256
ABS-524
ABS-329
ABS-520
ABS-408
ABS-394
14.45-15.00 ABS-367
ABS-51
ABS-198
ABS-505
ABS-240
ABS-478
ABS-550
ABS-102
ABS-337
ABS-549
ABS-417
ABS-475
PARALLEL III SCHEDULE
Room/ Topic
Venue Time
R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12
AS-02 AS-03
AS-03 AS-04
AS-06 AS-07 EN-01 EN-01 EN-04 EN-05 EN-07 EN-08 EN-06
EN-09 EN-10
15.30-15.45 ABS-557
ABS-55
ABS-199
ABS-142
ABS-25
ABS-486
ABS-140
ABS-116
ABS-341
ABS-68
ABS-107
ABS-421
15.45-16.00 ABS-574
ABS-598
ABS-201
ABS-192
ABS-254
ABS-488
ABS-216
ABS-132
ABS-412
ABS-72
ABS-289
ABS-444
16.00-16.15 ABS-59
ABS-71
ABS-202
ABS-246
ABS-260
ABS-489
ABS-219
ABS-368
ABS-439
ABS-508
ABS-369
ABS-452
16.15-16.30 ABS-108
ABS-98
ABS-21
ABS-276
ABS-268
ABS-507
ABS-248
ABS-420
ABS-501
ABS-462
16.30-16.45 ABS-120
ABS-185
ABS-210
ABS-344
ABS-271
ABS-561
ABS-320
ABS-547
ABS-528
ABS-465
15.30-16.45
ABBREVIATION
R1 = Classroom 1
R2 = Classroom 2
R3 = Classroom 3
R4 = Classroom 4
R5 = Classroom 5
R6 = Classroom 6
R7 = Classroom 7
R8 = Classroom 8
R9 = Classroom 9
R10 = Classroom 10
R11 = Classroom 11
R12 = Classroom 12
R13 = Classroom 13
AS-01 = Mathematics
AS-02 = Physics
AS-03 = Computer Science
AS-04 = Material Science
AS-05 = Chemistry
AS-06 = Biology
AS-07 = Pharmacology
AS-08 = Sport Science and Technology
AS-09 = Management Science
EN-01 = Mechanical Engineering
EN-02 = Chemical Engineering
EN-03 = Civil Engineering
EN-04 = Electrical Engineering
EN-05 = Electronics Engineering
EN-06 = Material Engineering
EN-07 = Environmental Engineering
EN-08 = Industry Engineering
EN-09 = Information Engineering
EN-10 = Computer and Communication Engineering
EN-11 = Architecture