STATESMAN Campers, Raising the standards.

STATESMAN XP-2

STATESMAN XP-2

TRAILER SIZE AND WEIGHT

Overall dimension (mm): 4535x1750x1180(+100mm high luggage rack) (LxWxH)

Outer box size (mm): 2205x1750x637 (LxWxH) Inner box size (mm): 2100x1680x450 (LxWxH) Distance from trailer top to the ground: 1180mm Ground clearance: 543mm Trailer tare mass: 900kg Reference VSB-1 GTM: 1700 KG, Reference VSB-1 ATM: 1800 KG, Reference VSB-1

TRAILER DRAW BAR AND CHASSIS TUBE

Extended/reinforced drawbar of 3000mm long, drawbar tube size: 100x50x3mm tube (heavy duty), fully welded to chassis, chassis: 70x50x3mm tube

Draw bar & trailer frames hot-dipped galvanized.

TRAILER BODY CONSTRUCTION AND

MATERIALS

Trailer panel walls: 1.5mm thick flat cold-pressed steel plate, powder coated.

All hinges, latches, fasteners are stainless steel Inside and outside of box top: Aluminum

checker plate: 1.5mm thick Trailer box top insulated

TRAILER SUSPENSION AND WHEEL

Independent coiled suspension with dual gas shock absorbers

10” electric brakes with hand braking system Off road all terrain wheels:

3x15” wheels, steel powder coated rims and 235/75R15 tyres, 6-stud pattern, including 1x Spare wheel mounted under chassis at trailer rear

TRAILER DETAILS & ACCESSORIES

Safety chains: Hot-dipped galvanized, comply with Australian standard 4177 with Australian standard markings

Hitch: Treg poly block hitch, loading capacity: 2000KG, unit weight: 10KG, complies with Australian standard, with Australian standard markings

Jockey wheel: Swing up type with 10” solid wheel Winch: PP webbing 8m to close camper, loading

capacity: 1000KG, heavy duty winch support

Stone guard: Hot-dipped galvanized stone guard with PVC mesh

Hot-dipped galvanized 2XGas bottle holders: Standard 9KG gas bottle holders

Hot-dipped galvanized 2X20L Jerry can holders Large powder coated steel tool box, size:

1565x1180x550mm (LxWxH) Slide out draw for fridge left side of the large

toolbox, maximum fridge size Maximum : 770x560x420 (LxWxH)

TRAILER DETAILS & ACCESSORIES

The fridge sample as shown is: 40L, 560x380x420mm (LxWxH)

Slide out storage drawer left side of the large toolbox, size: 640X640X200mm (LXWXH)

TRAILER DETAILS & ACCESSORIES

Gas struts: fitted for lifting bed base, extra heavy duty gas struts for safe folding

TRAILER DETAILS & ACCESSORIES

TENT AND ANNEX

Locks and keys: all access doors hinges and locks are stainless steel, water proof and dust sealed

Storage compartments fully sealed & lockable, located left side & right side of the rear of trailer box, for storage equipment

4 wind down rear stabilizer legs & adjusting spanner

Two luggage racks, hot-dipped galvanized; 1 on top of the large tool box, 1 on top of the trailer box

TRAILER DETAILS & ACCESSORIES

TRAILER KITCHENETTE

Water tank: 90L stainless steel water tank, size: 1000X520X180mm (LXWXH)

12V Electric water pump, allluminiumchecker plate cover over water pump.

High quality stainless steel filler cap Kitchen: kitchen top and stainless steel

kitchen sink; 1Xdrawer in kitchen, high quality lockable sliding rails

TRAILER ELECTRIC SET-UP

Wiring harness under trailer concealed in steel conduit

Wire cable: standard 7-core wire cable 4 LED tail Lights, 1 number plate light, number

plate holder 2 Reflectors: white on front of the large tool

box 

TRAILER ELECTRIC SET-UP

2 Tent bar lights and switch. 1 Cooking area light 3X12V outlets (1 beside the kitchen, 2 under

tent bed) Tent: 14OZ tent with double roof

ACCESSORIES

Jerry can.Gas stove/ BBQ FridgeAlloy wheelsBattery

Vehicle standards bulletin

VSB-01 12.5 Aggregate Trailer Mass (ATM) ATM is the total mass of the trailer when carrying the maximum load recommended

by the manufacturer. This includes mass imposed onto the towing vehicle when the combination vehicle is resting on a horizontal supporting plane.

12.6 Gross Trailer Mass (GTM) GTM is the mass transmitted to the ground by the tires of the trailer when coupled to

a towing vehicle and carrying the maximum load recommended by the manufacturer or importer, approximately uniformly distributed over the load bearing area.

12.7 Tare Mass Tare Mass is the total mass of the trailer when not carrying any load, but when ready

for service, unoccupied (if relevant) and with all fluid reservoirs (if fitted) filled to nominal capacity except for fuel, which shall be 10 liters only, and with all standard equipment and any options fitted. This includes any mass imposed onto the drawing vehicle when the combination vehicle is resting on a horizontal supporting plane. (Fluid reservoirs do not include water tanks and waste water tanks fitted to caravans).