static spares

MANDATORY SPARES(STATIC EQUIPMENT)

CCR REGENERATION PACKAGE GGSRP, HMEL

SECTION: A-4.1 6922-502-16-46-MD-101 of 3

Format No. EIL-1641-1924 Rev.1 Copyright EIL – All rights reserved

SECTION: A-4: MANDATORY /RECOMENDED SPARES A-4.1: STATIC EQUIPMENT

CCR REGENERATION PACKAGE

PROJECT : GURU GOBIND SINGH REFINERY OWNER : HPCL-MITTAL ENERGY LIMITED PMC : ENGINEERS INDIA LTD. JOB NO. : 6922

A 20.05.2008 ISSUED FOR BIDS TG VB AKM

Rev. No Date Purpose Prepared

by Checked

by Approved

by



SECTION: A-4.1 6922-502-16-46-MD-101 of 3


(A) MANDATORY SPARE PARTS 1. PRESSURE VESSELS, REGENERATION TOWER, REACTOR

Sl. No

Part Description Quantity Required

1 Bolting for each nozzle with blind/ companion flange and for each pad nozzle

10% (min. 2 nos.) for each nozzle

2 Gaskets for each nozzle with blind/ companion flange and for each pad nozzle

200 %

3 Bolting for internal flanges of each nozzle

One set for each nozzle

4 Gasket for internal flanges of each nozzle

200 %

5 Sight/light glasses assembly complete with bolting and gasket

4 sets for each installed glass.

6. Bolts, nuts, clamps, spares for demister of each size/ type

One set of each size / type

2. TUBULAR EXCHANGERS

SL. NO

PART DESCRIPTION QTY

1 Gaskets for girth joints, each nozzle with blind flange and interconnected nozzles

400%

2 Bolting (stud & nuts) 20% Bolting (Min. 4 studs and 8 nuts per joint)

3 Push Rods 100% 4 Lamiflex Sealing Strips 100%

3. ELECTRIC HEATER

SL. NO


1 Gaskets for girth joints, each nozzle with blind flange and interconnected nozzles

400%

2 Bolting (stud & nuts) 20% Bolting (Min. 4 studs and 8 nuts per joint)

3 Heating elements 10%(minimum 1) which shall be in-built and electrically not connected.

4. FILTERS, COALESCERS

SL.NO.


1 Filter Elements (Cartridges, Coalescing, separating elements)

100% for non reusable type of elements.

2 Bolting (stud & nuts) One set of each size of each nozzle 3 Gaskets 200% of each installed gasket



SECTION: A-4.1 6922-502-16-46-MD-101 of 3


(B) COMMISSIONING SPARES : To be recommended and supplied by vendor. (C) TWO YEARS OPERATIONAL SPARES :

Any additional spares required over and above mandatory spares for 2 years operation including spares for electrical, instrumentation, control etc. and any special tools and tackles required for maintenance shall be quoted separately along with details.

static spares

Documents