static white led neon - 24v · 2020-06-09 · static white led neon - 24v dome profile / side...

STATIC WHITE LED NEON - 24VDome Profile / Side Bending / Silicone

WATTAGE 3.7W per foot

IP RATING IP67 - wet locations. Protected against temporary submersion, limited protection against harsh environments.

PROFILE Dome

BEND ORIENTATION Side Bending

HOUSING MATERIAL Silicone

OUTPUT 2200K (2238 ±102K) - 104 lm/ft2700K (2725 ±120K) - 108 lm/ft3000K (3045 ±175K) - 112 lm/ft3500K (3525 ±202K) - 114 lm/ft4000K (3985 ±245K) - 118 lm/ft5700K (5669 ±355K) - 122 lm/ft

INPUT VOLTAGE 24VDC

CRI 80+

SEGMENT LENGTH Every 3.3”, not field-cuttable

MAXIMUM RUN 49 feet (single feed power)

DIMENSIONS 0.45” W x 1.14” H (11.5mm x 29mm)

MINIMUM BEND 4.72” diameter

INSTALLATION TEMP. 32°F to 140°F (do not install when temperatures are below freezing)

OPERATING TEMP. -13°F to 140°F

WARRANTY 3 year limited

POWER SUPPLY Compatible with all 24VDC power supplies -- see page 6

MOUNTING OPTIONS (SOLD SEPARATELY)

ANTI-WICKING FERRULEStandard on all LED Neon power cables. Located 4.5” from the connector. Protects against water ingress and circuit board corrosion.H 0.47” x W 1.18”

SPECIFIER

PROJECT

DATE

PART NUMBER BUILDER / ORDERING GUIDE

TECHNICAL INFORMATIONNOTE: All data has +/- 5% tolerance.

3 YEARLIMITED

WARRANTY

270° Beam Spread

LLI ARCHITECTURAL LIGHTING (847) 412-4880 [email protected] LLI ARCHITECTURAL LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE

Example part number: LLI-N3.7W-67-DSS-30K-24V-96in

SERIES IP RATING TYPE CCT VOLTAGE LENGTH

LLI-N3.7W – 67 – DSS – – 24V – 22K - 104 lm/ft (enter length in inches, up to 587”)

27K - 108 lm/ft

30K - 112 lm/ft

35K - 114 lm/ft

40K - 118 lm/ft

57K - 122 lm/ft

PAGE 1REV 20.01

0.54”

0.87”

Recommended: 2 mounting clips for every 12in of Neon.

Part Number: LLI-ND-MCL-1.5IN1.38” L x 0.87” H x 0.54” W

Mounting Clip

Channel options available (see page 5).

Recommended: 2 mounting clips for every 12in of Neon.

Part Number: LLI-ND-EXT-S-1.5IN1.38” L x 1.01” H x 0.63” W

0.63”

1.01”

Spring Mounting Clip

NOTE: Neon sections may be mounted end-to-end on the non-power feed end to create the appearance of longer runs. End-to-end Neon sections must have a 0.5” to 1” gap to allow for expansion/contraction. A dark spot may be visible at <20ft viewing distance.



PAGE 2REV 20.01

ORIENTATION & MINIMUM BEND DIAMETER

POWER FEED ORIENTATION GUIDE

SIDE LEFT FEED

SIDE RIGHT FEED

END FEED

REAR FEED



PAGE 3REV 20.01

POWER FEED & TERMINATION OPTIONS (IP67)

End Power Feed

Side Left Power Feed

Rear Power Feed

LENGTH

LLI-ND-67-PWR2-EF

LENGTH

LLI-ND-67-PWR2

SIDE

SL

LENGTH

LLI-ND-67-PWR2SERIES

SERIES

SERIES

39IN78IN

118IN196IN393IN

39IN78IN

118IN196IN393IN

39IN78IN

118IN196IN393IN

Side Right Power FeedLENGTH

LLI-ND-67-PWR2

SIDE

SR

39IN78IN

118IN196IN393IN

0.63”

1.14”

0.45”

Ø 0.47”

0.43” 0.2”

0.55”

0.08”

0.08”

0.62”

0.45”

1.7”1.2”

0.63”

0.45”

0.08”

Ø 0.47”

Ø 0.47”

0.55”

1.14”

0.43”0.52”SERIES

OVERALL LENGTH / CUT POINT GUIDE



PAGE 4REV 20.01

POWER FEED & TERMINATION OPTIONS (IP67)

End Cap

LLI-ND-ECSERIES

Jumper Power ConnectorLENGTH (L)SIDE

LLI-ND-67-CON2SERIES

SRSLEFRF

12IN39IN78IN

118IN196IN393IN

0.63”

0.45” 0.08”

1.14”

L

3.56'' 6.84'' 10.12'' 13.40'' 16.68'' 19.96'' 23.24'' 26.52'' 29.80'' 33.08'' 36.36'' 39.64''42.92'' 46.20'' 49.48'' 52.76'' 56.04'' 59.32'' 62.60'' 65.88'' 69.16'' 72.44'' 75.72'' 79.00''82.28'' 85.56'' 88.84'' 92.12'' 95.40'' 98.68'' 101.96'' 105.24'' 108.52'' 111.80'' 115.08'' 118.36''

121.64'' 124.92'' 128.20'' 131.48'' 134.76'' 138.04'' 141.32'' 144.60'' 147.88'' 151.16'' 154.44'' 157.72''161.00'' 164.28'' 167.56'' 170.84'' 174.12'' 177.40'' 180.68'' 183.96'' 187.24'' 190.52'' 193.80'' 197.08''200.36'' 203.64'' 206.92'' 210.20'' 213.48'' 216.76'' 220.04'' 223.32'' 226.60'' 229.88'' 233.16'' 236.44''239.72'' 243.00'' 246.28'' 249.56'' 252.84'' 256.12'' 259.40'' 262.68'' 265.96'' 269.24'' 272.52'' 275.80''279.08'' 282.36'' 285.64'' 288.92'' 292.20'' 295.48'' 298.76'' 302.04'' 305.32'' 308.60'' 311.88'' 315.16''318.44'' 321.72'' 325.00'' 328.28'' 331.56'' 334.84'' 338.12'' 341.40'' 344.68'' 347.96'' 351.24'' 354.52''357.80'' 361.08'' 364.36'' 367.64'' 370.92'' 374.20'' 377.48'' 380.76'' 384.04'' 387.32'' 390.60'' 393.88''397.16'' 400.44'' 403.72'' 407.00'' 410.28'' 413.56'' 416.84'' 420.12'' 423.40'' 426.68'' 429.96'' 433.24''436.52'' 439.80'' 443.08'' 446.36'' 449.64'' 452.92'' 456.20'' 459.48'' 462.76'' 466.04'' 469.32'' 472.60''475.88'' 479.16'' 482.44'' 485.72'' 489.00'' 492.28'' 495.56'' 498.84'' 502.12'' 505.40'' 508.68'' 511.96''515.24'' 518.52'' 521.80'' 525.08'' 528.36'' 531.64'' 534.92'' 538.20'' 541.48'' 544.76'' 548.04'' 551.32''554.60'' 557.88'' 561.16'' 564.44'' 567.72'' 571.00'' 574.28'' 577.56'' 580.84'' 584.12'' 587.40'' 590.68''

Dimension tolerance of ± 1/8”. Measurements below do not include area required for routing power wire. Add 1” distance to layout to account for routing end feed power wire. This product expands and contracts in varying ambient temperatures. If butting Neon end-to-end, add 1/2” to 1” gap between sections for expansion.

STATIC WHITE LED NEON - 24VDome Profile / Side Bending / SiliconeMOUNTING CHANNELS

0.54”

0.87”

ALUMINUM MOUNTING CHANNEL

20” Mounting ChannelPart Number: LLI-ND-EXT-S-20INDimensions: 20” L x 1.01” H x 0.63” W

0.63”

1.01”

ALUMINUM MOUNTING CHANNEL WITH SPRING CLIPS

4” Mounting ChannelPart Number: LLI-ND-EXT-F-4INDimensions: 4” L x 0.97” H x 0.52” W

0.52”

0.97”

FLEXIBLE STAINLESS STEEL MOUNTING CHANNEL


0.42”

0.19”

0.19”0.56”

20” Mounting ChannelPart Number: LLI-ND-EXT-P-20INDimensions: 20” L x 0.94” H x 0.55” W

PLASTIC MOUNTING CHANNEL

39” Mounting ChannelPart Number: LLI-ND-EXT-P-39INDimensions: 39.4” L x 0.94” H x 0.55” W



0.94”

0.55”

39” Mounting ChannelPart Number: LLI-ND-EXT-S-39INDimensions: 39.4” L x 1.01” H x 0.63” W

20” Mounting ChannelPart Number: LLI-ND-EXT-20INDimensions: 20” L x 1.01” H x 0.63” W

39” Mounting ChannelPart Number: LLI-ND-EXT-39INDimensions: 39” L x 1.01” H x 0.63” W


PAGE 5REV 20.01

NOTE: Leave a 0.5” to 1” gap between Neon power feed and mounting channel, to avoid undue stress on power feed cables.



PAGE 6REV 20.01

147

165

90

26

L

W147

165

90

26H

L

W

H

147

165

90

26

L

W147

165

90

26H

147

165

90

26

L

W147

165

90

26H

DIMMABLE ELECTRONIC 0-10V

PART NUMBER CAPACITY OUTPUT CLASS LOCATION L W HLLI-PS-DE010-030W-24V-KO 30W 24V CLASS 2 WET 6.5” 3.6” 1.6”

LLI-PS-DE010-060W-24V-KO 60W 24V CLASS 2 WET 7.4” 3.6” 1.6”




NON-DIMMABLE ELECTRONIC

PART NUMBER CAPACITY OUTPUT CLASS LOCATION L W HLLI-PS-NDE-030W-24V-KO 30W 24V CLASS 2 WET 6.5” 3.5” 1.02”

LLI-PS-NDE-060W-24V-KO 60W 24V CLASS 2 WET 7.4” 3.5” 1.2”

LLI-PS-NDE-096W-24V-KO 96W 24V CLASS 2 WET 8.7” 3.7” 1.7”

LLI-PS-DEC-200W-24V-KO 200W 24V CLASS 1 WET 10.3” 4.1” 1.8”

LLI-PS-DEC-300W-24V-KO 300W 24V CLASS 1 WET 10.9” 4.3” 1.8”

UNIVERSAL DIMMABLE ELECTRONIC FLICKER-FREE

PART NUMBER CAPACITY OUTPUT CLASS LOCATION L W HLLI-PS-UDEFF-030W-24V-KO 30W 24V CLASS 2 WET 6.5” 3.6” 1.0”

LLI-PS-UDEFF-060W-24V-KO 60W 24V CLASS 2 WET 7.4” 3.6” 1.0”




PART NUMBER CAPACITY OUTPUT CLASS LOCATION L W HLLI-PS-DM-020W-24V-KO 30W 24V CLASS 2 NEMA 3R 7.38” 2.11” 1.60”

LLI-PS-DM-040W-24V-KO 60W 24V CLASS 2 NEMA 3R 7.38” 2.11” 1.60”






LLI-PS-DM-300W-24V-CL2-KO 6 x 50W 24V CLASS 2 NEMA 3R 10.29” 5.69” 3.43”

LLI-PS-DM-600W-24V-KO 2 x 300W 24V CLASS 1 NEMA 3R 10.29” 6.79” 4.68”

W

H

L

DIMMABLE MAGNETIC

Optimal performance dims to 0%.*

*Performance can be affected by driver loading and dimmer type.

Optimal performance dims to 2-5%.

Optimal performance dims to 5-10%.*

PART NUMBER CAPACITY OUTPUT CLASS LOCATION L W HL3D0-96W24V-U 96W 24V CLASS 2 INDOOR 10.5” 5.5” 2.0”

LUTRON HI-LUME PREMIER 0.1% DIMMABLE ELECTRONICSoft-on, Fade-to-Black, continuous flicker-free dimming from 100% to 0.1.

POWER SUPPLIES

static white led neon - 24v · 2020-06-09 · static white led neon - 24v dome profile / side...

Documents