statistical process control 2
TRANSCRIPT
-
8/8/2019 Statistical Process Control 2
1/14
-
8/8/2019 Statistical Process Control 2
2/14
Statistical process control is applied after a processhas been stabilized so that any deviation from the
stability can be handled easily.
There are four types of attribute charts used for non
measurable defect and defective controlling
N and NP Charts for the control of number of
defectives or non- conforming C and U Charts for the control of the defects or non-
conformities
-
8/8/2019 Statistical Process Control 2
3/14
Used at places where various defectscould occur in a single product that is
being manufactured
The sample size of inspection is fixed
for this chart.
-
8/8/2019 Statistical Process Control 2
4/14
Standard Deviation is given by (np (p-1))
Upper Control Limit
np + 3(np (p-1))
Lower Control Limit
np - 3(np (p-1))
Where
p = fraction of defectives
n = sample size
-
8/8/2019 Statistical Process Control 2
5/14
-
8/8/2019 Statistical Process Control 2
6/14
Used at places where various defectscould occur in a single product that is
being manufactured
The sample size of inspection is variable
for this chart.The proportion of defectives are plotted
and analyzed for improvement of the
rocess
-
8/8/2019 Statistical Process Control 2
7/14
-
8/8/2019 Statistical Process Control 2
8/14
-
8/8/2019 Statistical Process Control 2
9/14
-
8/8/2019 Statistical Process Control 2
10/14
-
8/8/2019 Statistical Process Control 2
11/14
-
8/8/2019 Statistical Process Control 2
12/14
-
8/8/2019 Statistical Process Control 2
13/14
-
8/8/2019 Statistical Process Control 2
14/14
IMPLEMENTATION CHART
http://j/FOR%20PRINT/C%20CHART%20IMPLEMENTATION%2030.6.10.xlshttp://j/FOR%20PRINT/C%20CHART%20IMPLEMENTATION%2030.6.10.xls