stb command

start user services

Block size 131072, page size 2048, OOB size 64

Dumping data starting at 0x0 and ending at 0x200000...

#################### boot chain 0 ####################

yaffs: dev is 265289731 name is "romblock3"

yaffs: Attempting MTD mount on 253.3, "romblock3"



mount: mounting /dev/romblock3 on /home/hdiptv failed: Invalid argument

starting pid 1, tty '/dev/ttyS0': '/bin/getty -L ttyS0 115200 vt102 &> /dev/null'

(none) login: root

# usb 2-1: new high speed USB device using brcm-ehci-1 and address 2

usb 2-1: configuration #1 chosen from 1 choice

Initializing USB Mass Storage driver...

scsi2 : SCSI emulation for USB Mass Storage devices

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

isa bounce pool size: 16 pages

Vendor: IBM Model: USB2.0 Disk Rev: 5.00

Type: Direct-Access ANSI SCSI revision: 02

SCSI device sda: 4030464 512-byte hdwr sectors (2064 MB)

sda: Write Protect is off

sda: assuming drive cache: write through




sda: sda1

sd 2:0:0:0: Attached scsi removable disk sda

sd 2:0:0:0: Attached scsi generic sg0 type 0

#

#

# nandwrite -p $CURRENT_APP dareapp.img

open input file: No such file or directory



# usb 2-1: USB disconnect, address 2

scsi 2:0:0:0: rejecting I/O to dead device

usb 2-1: new high speed USB device using brcm-ehci-1 and address 3



#

# Vendor: IBM Model: USB2.0 Disk Rev: 5.00








sda: sda1



#

#

#

#

#

#

# ps

PID PORT STAT SIZE SHARED %CPU COMMAND

1 S 0K 0K 1.1 init

2 S 0K 0K 0.0 migration/0

3 S 0K 0K 0.0 ksoftirqd/0



6 S 0K 0K 0.0 events/0


8 S 0K 0K 0.0 khelper

9 S 0K 0K 0.0 kthread

10 S 0K 0K 0.0 kblockd/0


12 S 0K 0K 0.0 khubd

13 S 0K 0K 0.0 kseriod

14 S 0K 0K 0.0 kgameportd

15 S 0K 0K 0.0 pdflush


17 S 0K 0K 0.0 kswapd0

18 S 0K 0K 0.0 aio/0

19 S 0K 0K 0.0 aio/1

20 S 0K 0K 0.0 ata/0

21 S 0K 0K 0.0 ata/1

22 S 0K 0K 0.0 ata_aux

23 S 0K 0K 0.0 scsi_eh_0

24 S 0K 0K 0.0 scsi_eh_1

25 S 0K 0K 0.0 mtdblockd

26 S 0K 0K 0.0 romblockd

27 S 0K 0K 0.0 pegasus

41 S 0K 0K 0.0 syslogd

49 S 0K 0K 0.0 portmap

50 S 0K 0K 0.0 utelnetd -d

122 S0 S 0K 0K 0.0 -sh

417 S 0K 0K 0.0 scsi_eh_3

418 S 0K 0K 0.0 usb-storage

567 S0 R 0K 0K 0.0 ps

# ?

sh: ?: command not found

# help

GNU bash, version 2.05.0(62)-release (mipsel-unknown-linux-gnu)

These shell commands are defined internally. Type `help' to see this list.

Type `help name' to find out more about the function `name'.

Use `info bash' to find out more about the shell in general.

A star (*) next to a name means that the command is disabled.

%[DIGITS | WORD] [&] . filename

: [ arg... ]

alias [-p] [name[=value] ... ] bg [job_spec]

bind [-lpvsPVS] [-m keymap] [-f fi break [n]

builtin [shell-builtin [arg ...]] case WORD in [PATTERN [| PATTERN].

cd [-PL] [dir] command [-pVv] command [arg ...]

compgen [-abcdefjkvu] [-o option] complete [-abcdefjkvu] [-pr] [-o o

continue [n] declare [-afFrxi] [-p] name[=value

dirs [-clpv] [+N] [-N] disown [-h] [-ar] [jobspec ...]

echo [-neE] [arg ...] enable [-pnds] [-a] [-f filename]

eval [arg ...] exec [-cl] [-a name] file [redirec

exit [n] export [-nf] [name ...] or export

false fc [-e ename] [-nlr] [first] [last

fg [job_spec] for NAME [in WORDS ... ;] do COMMA

function NAME { COMMANDS ; } or NA getopts optstring name [arg]

hash [-r] [-p pathname] [name ...] help [-s] [pattern ...]

history [-c] [-d offset] [n] or hi if COMMANDS; then COMMANDS; [ elif

jobs [-lnprs] [jobspec ...] or job kill [-s sigspec | -n signum | -si

let arg [arg ...] local name[=value] ...

logout popd [+N | -N] [-n]

printf format [arguments] pushd [dir | +N | -N] [-n]

pwd [-PL] read [-ers] [-t timeout] [-p promp

readonly [-anf] [name ...] or read return [n]

select NAME [in WORDS ... ;] do CO set [--abefhkmnptuvxBCHP] [-o opti

shift [n] shopt [-pqsu] [-o long-option] opt

source filename suspend [-f]

test [expr] time [-p] PIPELINE

times trap [arg] [signal_spec ...] or tr

true type [-apt] name [name ...]

typeset [-afFrxi] [-p] name[=value ulimit [-SHacdflmnpstuv] [limit]

umask [-p] [-S] [mode] unalias [-a] [name ...]

unset [-f] [-v] [name ...] until COMMANDS; do COMMANDS; done

variables - Some variable names an wait [n]

while COMMANDS; do COMMANDS; done { COMMANDS ; }

# cd

# pl

sh: pl: command not found

# -ps

sh: -ps: command not found

# -pl

sh: -pl: command not found

# clear

sh: clear: command not found

# clea

sh: clea: command not found

# cls

sh: cls: command not found

# cl

sh: cl: command not found

# cls


# login

(none) login: root

# cls


# clear

sh: clear: command not found

# 0988888

sh: 0988888: command not found





# ls

# ps

PID PORT STAT SIZE SHARED %CPU COMMAND

1 S 0K 0K 0.4 init







8 S 0K 0K 0.0 khelper

9 S 0K 0K 0.0 kthread



12 S 0K 0K 0.0 khubd

13 S 0K 0K 0.0 kseriod

14 S 0K 0K 0.0 kgameportd



17 S 0K 0K 0.0 kswapd0

18 S 0K 0K 0.0 aio/0

19 S 0K 0K 0.0 aio/1

20 S 0K 0K 0.0 ata/0

21 S 0K 0K 0.0 ata/1

22 S 0K 0K 0.0 ata_aux

23 S 0K 0K 0.0 scsi_eh_0

24 S 0K 0K 0.0 scsi_eh_1

25 S 0K 0K 0.0 mtdblockd

26 S 0K 0K 0.0 romblockd

27 S 0K 0K 0.0 pegasus

41 S 0K 0K 0.0 syslogd

49 S 0K 0K 0.0 portmap

50 S 0K 0K 0.0 utelnetd -d

122 S0 S 0K 0K 0.0 -sh

417 S 0K 0K 0.0 scsi_eh_3

418 S 0K 0K 0.0 usb-storage

577 S0 S 0K 0K 0.0 -sh

587 S0 R 0K 0K 0.0 ps

#

#

#

# ls

# cd mnt

sh: cd: mnt: No such file or directory

# cd /

# ls

bin etc init linuxrc proc sbin sys usr

dev home lib mnt root share tmp var

# cd mnt

# ls

hd nfs

# cd hd

# ls

sda1

# cd sdal

sh: cd: sdal: No such file or directory

# ls/

sh: ls/: No such file or directory

# cd /

# ls



# cd etc

# ls

build-date hotplug partition.map

config hotplug.d passwd

dhcpc init.d profile

fstab inittab protocols

fstab-xfs mtab services

group osflags.xml termcap

host.conf partition-lba48.map version

# cd /

# cd home

# ls

hdiptv info upgrade

# cd /

# cd mnt

# ls

hd nfs














sda: sda1



ls

hd nfs

# cd /

# ls



# cd mnt

# cd hd

# ls

sda1

# cd sdal


# ls

sda1

# cd sda

sh: cd: sda: No such file or directory

# cd /

µÐ€ð ò ù

BCM74130011

012

K1

K2

K3

K4

K5

Shmoo Version=3.8

DDR Freq=0x0000018C

%00000001%

RC1=00000003

WC1=FFFFFFEC

RC2=00000017

WC2=0000003C

RC3=0000000D

WC3=FFFFFFEC

RC4=0000000D

WC4=0000003D

NWC=00000014

RC5=00000004

WC5=00000014

RC6=00000016

WC6=00000014

NRC=0000000D

RW=00000013

WW=00000052

G=00000000 R=0000000D W=00000014

BL=00000000

RC1=00000004

RC2=00000016

BL=00000001

RC1=00000005

RC2=00000015

BL=00000002

RC1=00000003

RC2=00000014

BL=00000003

RC1=00000005

RC2=00000014

3

COPY CODE

A567

BCM97213B1 CFE v2.26, CFE core v2.12, Endian Mode: Little

Build Date: 2010å¹´ 06æœˆ 01æ—¥ æ˜ŸæœŸäºŒ 09:29:36 CST (ken@ZouYongqian)

Copyright (C) Broadcom Corporation.

add a new flash, flash_phys_base=0x10000000, will be reset to 0!

DDR Freq: 396MHz

CPU speed: 405MHz

Memory Config: 32-bit UMA

Device Tech: 1Gb

Total memory: 256MB

Boot Device: NAND

Total flash: 256MB

osflags open device flash0.osflags0

osflags: get valid osflags partition flash0.osflags0.

osflags checksum ok

Initializing USB.

USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

CFE initialized.

Starting splash screen.

***************************************************

Found splash image - Width = 1280 Height = 720 splashWidth: 1280 splashheight: 720

***************************************************

-- replace splashAddress1 0xae600000 to new offsetNew 0xe600000

-- replace splashAddress 0xaf600000 to new offsetNew 0xf600000

xor = 0

Loader:elf Filesys:raw Dev:flash1.kernel0 File: Options:mem=100M flashsize=256M brcmnand=rescan

Loading: !!!!! UNC read error occurred, while reading from NAND flash

cfe loading percent: 1%

cfe loading percent: 1%

0x80001000/8121540 cfe loading percent: 14%

0x807bfcc4/181072 Entry address is 0x80422000

TP1 Entry Address at 0x80000ffc = 80422000

Starting program at 0x80422000

<5>Linux version 2.6.18-7.1 (ken@ZouYongqian) (gcc version 4.2.0 20070124 (prerelease) - BRCM 11ts-20090508) #172 SMP Mon May 31 13:56:48 CST 2010

Fetching vars from bootloader... OK (E,D,B,C)

Detected 256 MB on MEMC0 (strap 0x235c2812)

CFE EnvVar: SPLASH_PART_STARTAD: 0f400000, SPLASH_PART_SIZE: 00400000

g_board_RAM_size=256MB

**********SKIP_CHECK_BOOTROM: BOOTEDFROMFLASH, Base=10000000, flashSize=256MB

Options: sata=1 enet=1 emac_1=1 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=1

CPU revision is: 0002a044

FPU revision is: 00130001

Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes.

Primary data cache 64kB, 4-way, linesize 64 bytes.

<6>Synthesized TLB refill handler (23 instructions).

<6>Synthesized TLB load handler fastpath (37 instructions).

<6>Synthesized TLB store handler fastpath (37 instructions).

<6>Synthesized TLB modify handler fastpath (36 instructions).

Determined physical RAM map:

memory: 10000000 @ 00000000 (usable)

User-defined physical RAM map:

node [00000000, 06400000: RAM]

node [06400000, 09c00000: RSVD]

<5>Reserving 156 MB upper memory starting at 06400000

<7>On node 0 totalpages: 65536

<7> DMA zone: 65536 pages, LIFO batch:15

Built 1 zonelists. Total pages: 65536

<5>Kernel command line: mem=100M flashsize=256M brcmnand=rescan console=ttyS0,115200 rw

PID hash table entries: 2048 (order: 11, 8192 bytes)

Found MIPS counter frequency: 203 Mhz

Using 202.502 MHz high precision timer.

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Memory: 91776k/262144k available (3368k kernel code, 170180k reserved, 856k data, 3704k init, 0k highmem)

Mount-cache hash table entries: 512

Checking for 'wait' instruction... available.

plat_prepare_cpus: ENABLING 2nd Thread...

TP0: prom_boot_secondary: Kick off 2nd CPU...

CPU revision is: 0002a044

FPU revision is: 00130001

Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes.

Primary data cache 64kB, 4-way, linesize 64 bytes.

Synthesized TLB refill handler (23 instructions).

Brought up 2 CPUs

migration_cost=1000

NET: Registered protocol family 16

PCI->SDRAM window size: 512MB

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)


IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

TCP established hash table entries: 8192 (order: 4, 65536 bytes)

TCP bind hash table entries: 4096 (order: 3, 32768 bytes)

TCP: Hash tables configured (established 8192 bind 4096)

TCP reno registered

brcm-pm: disabling power to USB block

brcm-pm: disabling power to ENET block

brcm-pm: disabling power to SATA block

squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher

NTFS driver 2.1.27 [Flags: R/O].

JFFS2 version 2.2. (NAND) (SUMMARY) (C) 2001-2006 Red Hat, Inc.

fuse init (API version 7.7)

yaffs Mar 5 2010 13:06:22 Installing.

io scheduler noop registered

io scheduler anticipatory registered (default)

io scheduler deadline registered

io scheduler cfq registered

Serial: 8250/16550 driver $Revision: 1.90 $ 3 ports, IRQ sharing disabled

serial8250: ttyS0 at MMIO 0x0 (irq = 22) is a 16550A



RAMDISK driver initialized: 16 RAM disks of 8704K size 1024 blocksize

loop: loaded (max 8 devices)

brcm-pm: enabling power to ENET block

Broadcom BCM7413 P21 Ethernet Network Device v2.0 Mar 5 2010 13:07:52

Config Internal PHY Through MDIO: Auto-negotiation timed-out

: 10 MB Half-Duplex (assumed)

bcmemac: no PHY detected on EMAC_1, disabling

PPP generic driver version 2.4.2


brcm-pm: enabling power to SATA block

PCI: Enabling device 0000:01:00.0 (0000 -> 0003)

ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42

ata2: SATA max UDMA/133 cmd 0xB0510100 ctl 0xB0510120 bmdma 0xB0510130 irq 42

scsi0 : sata_svw

ata1: SATA link down (SStatus 4 SControl 300)

ATA: abnormal status 0x7F on port 0xb051001c

scsi1 : sata_svw

ata2: SATA link down (SStatus 4 SControl 300)

ATA: abnormal status 0x7F on port 0xb051011c

Broadcom STB NAND controller (BrcmNand Controller)

i=0, CS[0] = 0

brcmnand_probe: CS0: dev_id=20da1095

After: NandSelect=40000101, nandConfig=16152300

NAND Config: Reg=16152300, chipSize=256 MB, blockSize=128K, erase_shift=11

busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff

timing1 not adjusted: 5363444f

timing2 not adjusted: 00000fc6

BrcmNAND mfg 20 da ST NAND02GW3B2C 256MB

Found NAND: ACC=f7ff1010, cfg=16152300, flashId=20da1095, tim1=5363444f, tim2=00000fc6

BrcmNAND version = 0x0302 256MB @00000000

brcmnand_probe: CS0: dev_id=20da1095

After: NandSelect=40000101, nandConfig=16152300

Found NAND chip on Chip Select 0, chipSize=256MB, usable size=256MB, base=0x

brcmnand_scan: chip->pbase=10000000, set to 0 to disable xor!

brcmnand_scan: B4 nand_select = 40000101

brcmnand_scan: After nand_select = 40000101

ACC_CONTROL for SLC NAND: f7ff1010, eccLevel=15

SLC flash: ACC_CONTROL = f7ff1010

page_shift=11, bbt_erase_shift=17, chip_shift=28, phys_erase_shift=17

Brcm NAND controller version = 3.2 NAND flash size 256MB @00000000

mtd->oobsize=64, mtd->eccOobSize=16

brcmnand_scan: mtd->oobsize=64

brcmnand_scan: oobavail=50, eccsize=512, writesize=2048

brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3

brcmnand_default_bbt: bbt_td = bbt_main_descr

rescanning ....

----- Contents of BBT -----

Bad block at ac60000

Bad block at d000000

----- END Contents of BBT -----

brcmnandCET: Status -> Deferred

numchips=1, size=10000000

Creating 11 MTD partitions on "bcm7xxx-nand.0":

0x000000000c400000-0x0000000010000000 : "temp"

0x0000000007400000-0x000000000c400000 : "app1"

0x0000000006c00000-0x0000000007400000 : "kernel1"

0x0000000001c00000-0x0000000006c00000 : "app0"

0x0000000001400000-0x0000000001c00000 : "kernel0"

0x0000000001200000-0x0000000001400000 : "osflags1"

0x0000000001000000-0x0000000001200000 : "osflags0"

0x0000000000c00000-0x0000000001000000 : "config"

0x0000000000800000-0x0000000000c00000 : "splash"

0x0000000000000000-0x0000000000200000 : "cfe"

0x0000000000200000-0x0000000000300000 : "nvm"

usbmon: debugfs is not available

ehci_hcd_brcm_init: Initializing 2 EHCI controller(s)

brcm-pm: enabling power to USB block

10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-0)

drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller

- USB h/w setup mode <B>

- USB power enable set for active LOW mode

brcm-ehci brcm-ehci.0: BRCM EHCI

brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1

brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300

brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004

usb usb1: configuration #1 chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-1)

drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller

brcm-ehci-1 brcm-ehci-1.1: BRCM EHCI

brcm-ehci-1 brcm-ehci-1.1: new USB bus registered, assigned bus number 2

brcm-ehci-1 brcm-ehci-1.1: irq 57, io mem 0x10480500

brcm-ehci-1 brcm-ehci-1.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004




ohci_hcd_brcm_init: Initializing 2 OHCI controller(s)

2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)

drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller

- Resetting at b0480408

<-- brcm_start_hc

brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI

brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 3

brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400




2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)

drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller

- Resetting at b0480608

<-- brcm_start_hc

brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI

brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 4

brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480600






usbcore: registered new driver hiddev

usbcore: registered new driver usbhid

drivers/usb/input/hid-core.c: v2.6:USB HID core driver

pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver

usbcore: registered new driver pegasus

drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)

usbcore: registered new driver rtl8150

usbcore: registered new driver asix

usbcore: registered new driver cdc_ether

usbcore: registered new driver net1080

usbcore: registered new driver zaurus

usbcore: registered new driver iforce

TCP bic registered



Freeing unused kernel memory: 3704k freed

init started: BusyBox v1.11.1 (2010-05-31 13:51:42 CST)

starting pid 1, tty '': '/etc/init.d/rcS'

Mount /proc fs

Mount /sys fs

Mount /dev/pts

Mount /proc/bus/usb

Cleaning up utmp and wtmp

Start syslog daemon

Configure Network interface

start services

telnetd: starting

port: 23; interface: any; login program: /bin/login

start user services

Block size 131072, page size 2048, OOB size 64

Dumping data starting at 0x0 and ending at 0x200000...

#################### boot chain 0 ####################





mount: mounting /dev/romblock3 on /home/hdiptv failed: Invalid argument

starting pid 1, tty '/dev/ttyS0': '/bin/getty -L ttyS0 115200 vt102 &> /dev/null'

(none) login: root

#

#

# ls

# cd /

# ls



# cd mnt

# ls

hd nfs

# cd hd

# ls

# ls

# cd /

#

# ls



# cd dev

# ls

console log loop9 mtdblock4 null romblock9 sdb5

hda loop0 mem mtdblock5 ppp root sdb6

hda1 loop1 mtd0 mtdblock6 ptmx scd0 sr0

hda2 loop10 mtd1 mtdblock7 pts scd1 sr1

hda3 loop11 mtd2 mtdblock8 ram0 sda tty

hda4 loop12 mtd3 mtdblock9 ram1 sda1 tty0

hda5 loop13 mtd4 mtdr0 random sda2 tty1

hda6 loop14 mtd5 mtdr1 romblock0 sda3 tty2

hdc loop15 mtd6 mtdr2 romblock1 sda4 tty3

hdc1 loop2 mtd7 mtdr3 romblock2 sda5 tty4


hdc3 loop4 mtd9 mtdr5 romblock4 sdb ttyS0

hdc4 loop5 mtdblock0 mtdr6 romblock5 sdb1 ttyS1

hdc5 loop6 mtdblock1 mtdr7 romblock6 sdb2 urandom

hdc6 loop7 mtdblock2 mtdr8 romblock7 sdb3 zero

kmem loop8 mtdblock3 mtdr9 romblock8 sdb4

# cd usb 2-1: USB disconnect, address 2



Initializing USB Mass Storage driver...


usbcore: registered new driver usb-storage

USB Mass Storage support registered.

isa bounce pool size: 16 pages









sda: sda1



ls

sh: cd: ls: No such file or directory

# cd /

#

#

# ls



# cd dev

# ls

console log loop9 mtdblock4 null romblock9 sdb5

hda loop0 mem mtdblock5 ppp root sdb6

hda1 loop1 mtd0 mtdblock6 ptmx scd0 sr0

hda2 loop10 mtd1 mtdblock7 pts scd1 sr1

hda3 loop11 mtd2 mtdblock8 ram0 sda tty

hda4 loop12 mtd3 mtdblock9 ram1 sda1 tty0

hda5 loop13 mtd4 mtdr0 random sda2 tty1

hda6 loop14 mtd5 mtdr1 romblock0 sda3 tty2

hdc loop15 mtd6 mtdr2 romblock1 sda4 tty3



hdc3 loop4 mtd9 mtdr5 romblock4 sdb ttyS0

hdc4 loop5 mtdblock0 mtdr6 romblock5 sdb1 ttyS1

hdc5 loop6 mtdblock1 mtdr7 romblock6 sdb2 urandom

hdc6 loop7 mtdblock2 mtdr8 romblock7 sdb3 zero

kmem loop8 mtdblock3 mtdr9 romblock8 sdb4

#

# cd /

# ls



# cd mnt

# ls

hd nfs

# cd hd

# ls

sda1

# cd sdal


# ls

sda1
















sda: sda1



usb 2-1: USB disconnect, address 4













sda: sda1



# ls

sda1

# cd sdal


# cd sda1

# ls

40B Ly Thai To.txt WinRAR3.3Corp

576 anh 39A

AutoRun.inf bien bang

BANG CHAM CONG.xls dareapp.img

BANG LUONG 2010.xls english (PC)

CT VTC gdnip.exe

Nero 8.3.2.1. Micro edition jirrj.cmd

New Folder luong 2010.chi loan

New Folder (2) qd57ubnd.pdf

Quy trinh goc.rar sw

Rubi tac pham di chuc.doc

Ruby tinh luong.hong

STB remote Tool tong hop cuoc 6x99.xls

Starcraft1152 tuyen ngon doc lap.doc

UpgradeVersion vba


Writing data to block 0





Writing data to block a0000

Writing data to block c0000

Writing data to block e0000






Writing data to block 1a0000

Writing data to block 1c0000

Writing data to block 1e0000




















Writing data to block aa0000

Writing data to block ac0000

Writing data to block ae0000

Writing data to block b00000





Writing data to block ba0000

Writing data to block bc0000

Writing data to block be0000






Writing data to block ca0000

Writing data to block cc0000

Writing data to block ce0000

Writing data to block d00000





Writing data to block da0000

Writing data to block dc0000

Writing data to block de0000






Writing data to block ea0000

Writing data to block ec0000

Writing data to block ee0000

Writing data to block f00000





Writing data to block fa0000

Writing data to block fc0000

Writing data to block fe0000











Writing data to block 1aa0000

Writing data to block 1ac0000

Writing data to block 1ae0000

Writing data to block 1b00000





Writing data to block 1ba0000

Writing data to block 1bc0000

Writing data to block 1be0000






Writing data to block 1ca0000

Writing data to block 1cc0000

Writing data to block 1ce0000

Writing data to block 1d00000





Writing data to block 1da0000

Writing data to block 1dc0000

Writing data to block 1de0000






Writing data to block 1ea0000

Writing data to block 1ec0000

Writing data to block 1ee0000

Writing data to block 1f00000





Writing data to block 1fa0000

Writing data to block 1fc0000

Writing data to block 1fe0000















#

stb command

Documents