steelmate manufacturing facility - acb.noacb.no/pdf/brosjyre.pdf · 2006 pts200n awarded 4 stars by...
TRANSCRIPT
2011-3-10 4
Highly accurate production equipment, including Mazak, Sodick
etc. Tolerance accuracy can be as close as 0.005 mm.
2011-3-10 6
ROHS (ELV) Laboratory, Environment Laboratory, EMI Laboratory.
Most tests are performed on-site at Steelmate.
Test machines: AOI, ICT, Multi-function tester (developed by
Steelmate).
2011-3-10 7
2003
2004
IEC 839-10-1
CE, E-mark, FCC
ISO 9001:2000
2006.8
2007.9
ISO/TS16949
ISO/14001
ISO/18000
2011-3-10 8
PTS400I won Mobile Electronics News
Gold Award in UK 4 Years Running
PTS400N won the I.C.E. gold award in
2006
PTS200N awarded 4 stars by
Auto Express in UK in 2005
PTSV401 win the SEMA show
global Media award in 2007
2011-3-10 16
Target customer list
1.Dealer (expeditor)
2.Retailer
3.End user
4.Chain stores
5.OEM with other brand
6.Fleet vehicle owner’s/operators
7.Custom designed user
2011-3-10 17
Target Customer List
1. Independent shops/garages/installers
2. Fleet vehicle owners/operators: shuttle bus/van
services, courier companies, rental car companies,
etc..
3. Chain store companies: Best Buy, Pep Boys, Fry’s,
etc..
4. …
2011-3-10 22
Matching a Car’s Paint Color
Visit this website and follow the directions to find and
order factory matching automotive paint:
http://www.paintscratch.com
2011-3-10 24
Properly Painting a Steelmate Sensor
Do not paint Standard Sensors
Blank sensors have primer only and are designed to be painted to color to match any vehicle
Blank sensors can ship with most systems but they must be requested when the order is placed
SM-12B-09 SM-14S-06SM-14D
2011-3-10 26
Vertical bumper installation (less than 5 o angle)
How to Correctly Install a Steelmate Sensor
2011-3-10 27
How to Correctly Install a Steelmate Sensor
Non-vertical bumper installation (more than 5 o angle)
Requires an angle adjustment ring for proper operation
Different angle rings are available
2011-3-10 28
Changing a Sensor Angle Ring
To change the angle
ring of sensor 12B-09,
use a small flat blade
screwdriver and follow
these directions
2011-3-10 30
Testing the System After Installation
After installation test the system by holding a wooden board
(0.3m x 1m) about 1.5m behind the vehicle. Slowly reverse
the vehicle to test the system functions.
2011-3-10 31
Installation Errors and Corrections
The sensor hole is drilled and the height of the hole is less than 45cm from the ground.
Solution: use 10 o /13 o angle ring to correct the sensor detection direction.
The sensor hole for 12B-09 is drilled using a hole saw for 14D
Solution: install 14D sensors instead
The height of sensor hole is less than 30cm or the hole diameter is more than 3cm
Solution: replace the bumper
2011-3-10 32
For vehicles with a spare tire, tow bar, or similar extension, install
one of the following models: PTSW1, PTSW2,
PTS400/E/M/N/I/X/X1/V/V1/W/L1/L2/L3/L4/L5/L6/V5/V6/M2/M
5/M6/M8, These models feature a learning function to identify the
protrusion so it will not cause false alarms.
Vehicles with Interfering Protrusions
2011-3-10 34
Steelmate Parking Assist System Advantages
World’s largest supplier of parking assist systems,
with nearly 20 years experience
Quality
ISO9001, ISO/TS16949 approval
CE, E-MARK, FCC and CCC certified
General Motors qualified supplier
5 years of OEM production for Toyota, Honda, etc.
More than 50 product models available