step 7 step 9 - secure.img.wfcdn.com · step 6 approx. 30 minutes recomm. 2 person tools required...
TRANSCRIPT
Assembly Instruction
Customer ServiceTel/Fax: 281.500.9372Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)Email: [email protected]
Install Square Leg(5)on Panel(B)with Screw(2).
STEP 6
Approx. 30 minutes
Recomm. 2 Person
Tools Required
Attach Bottom Panel(B) to assembled unit with Screw(1).
STEP 7
Unfold the Bin(9)and slide into the storage.
STEP 9
Upright the unit.Attach Back Panel(H)to the back sidewith Power Pin(6).
STEP 8
WARNING:>This unit has been designed to support themaximum loads shown. Exceeding theseload limits could cause sagging, instability,product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
(6)x16pcs
(1)x6pcs
(2)x12pcs(5)x4pcs
(9)x4pcs
Furinno Multipurpose Storage Cabinetwith 4 Bin-Type Drawer
1115920140325(2)
MODEL : 11159 23.6”(W) x 33.1”(H) x11.8 ”(D)DIMENSION :
its Space. its Budget
www.furinno.com
15
*Unit in Pound(lbs)
5
5
1
2
3
4
5
6pcs
12pcs
2pcs
18pcs
16pcs
4pcs
A
B
C
D
E
1pcs
1pcs
1pcs
1pcs
1pcs
6
Long Screw
Short Screw
Long Plastic Dowel
Short Plastic Dowel
Square Leg
Power Pin
Top Panel
Bottom Panel
Left Side Panel
Right Side Panel
Center Panel
USEFUL HINTS BEFORE YOU START:1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
Insert Dowel(4) to Panel(G1)(G2)(G3).Insert Dowel(3)&(4)to Panel(F).
Insert Cam-Lock Nut(7)and Dowel(4)into Panel(C)(D)(E).**Arrow on Cam-Lock Nut should be pointing toward hole.**
Attach Shelf Panel(G)to Panel(C)&(E).Attach Panel(F)to Panel(E)&(D).
STEP 3
STEP 1
STEP 2
Screw Cam-Lock Screw(8)into the pre-drilled holes on Panel(A).
Attach assembled unit to Panel(A)andtighten Cam-Lock Nut(7) using phillips screwdriver.
STEP 5STEP 4
F
GG
H
1pcs
3pcs
2pcs
Short Shelf Panel
Long Shelf Panel(G1)(G2)(G3)
Back Panel
7
8
6pcs
4pcs
6pcs
9
Cam-Lock Nut
Cam-Lock Srew
Bin
(6)x2pcs
No Hardware List Qty No QtyParts List
(8)x6pcs