steps towards advance technology “lps, gis & sms system” ( lps = loading point system...
TRANSCRIPT
Steps Towards Advance Technology
“LPS, GIS & SMS SYSTEM”( LPS = Loading Point System
GIS=Geographical Information SystemSMS = Short Message Service)
By: Manzoor Hussain Malik
Senior Vice President (Agri.)
Shakarganj Mills Limited
Shakarganj Mills Limited
We are using advance technologies like LPS, GIS and SMS in Shakarganj Mills.
LPS System is used at Check Posts to identify the Sugarcane Loaded Vehicle with GPS Position.
GIS System is used for Grower Wise Survey with Field Pictures and GPS position.
SMS System is used to check the Current Yard Balance, Crushing & Recovery etc.
HOW LPS WORK
Following technologies are required for this system :-
1. GSM – Group Special Mobile (Telenor)
2. GPS – Global Positioning System
3. GPRS – General Packet Radio Service
(Mobile Internet)
4. Java Supported Symbian Mobile (Nokia C5-03)
HOW LPS WORK
Following Items must be checked before the start of Software :-
1. Time/Date must be correct
2. Operator Signals must be available
3. Mobile Internet must be enabled on SIM
4. Mobile must be configured for Internet
SOFTWARE FUNCTIONS FOR LPS & GIS SYSTEM
LPS & GIS SYSTEM
New Registration Check Registration Configuration 0 Pending Photos
Powered by Shakarganj
Feedback of submitted
record
To submit new record
To define Company and
Area
Captured Images
waiting to Upload
Snap of Vehicle Registration
These snaps are taken at Check Post and Send to SML Server through Software with a unique code.
Snap of Vehicle with Driver
Snaps of Vehicle
Verification
The snaps and unique code are verified at Token-I
Verification
The snaps and unique code are verified at Token-I
SNAPING PROCESSSTEP-1: Identification
Image-1 : Data of Board
SNAPING PROCESSSTEP-1: Identification
Image-2 : Grower or CNIC Image
SNAPING PROCESSSTEP-1: Identification
Image-3 : Growers Home Image
SNAPING PROCESSSTEP-2: Field Side - I
Image-1 : Data of Board
SNAPING PROCESSSTEP-2: Field Side - I
Image-2 : Field Close
SNAPING PROCESSSTEP-2: Field Side - I
Image-3 : Field Overall
SNAPING PROCESSSTEP-3: Field Side - II
Image-1 : Data of Board
SNAPING PROCESSSTEP-3: Field Side - II
Image-2 : Field 2nd Side Close
SNAPING PROCESSSTEP-3: Field Side - II
Image-3 : Field 2nd Side Overall
SNAPING PROCESSSTEP-4,5,6: If needed (Separate Site)
Image-1 : Data of Board
Image-2 : Field Close
Image-3 : Field Overall
(Repeat step 3)
Complete Set of Pictures with Relevant Data
GEOGRAPHICAL LOCATION OF GROWER
Sugarcane Plot Marked
A GSM modem is a specialized type of modem which accepts a SIM card, and operates over a subscription to a mobile operator, just like a mobile phone.
A Subscriber identification module (SIM) is used with GSM Modem to Send and Receive SMS.
Following Equipments are required for SMS System
SENDING TEXT MESSAGE
At your Cell Phone, write text message with the given Codes and send to Specific Number
To: 03418205328
Text:Balance
RECEIVING TEXT MESSAGE
System will automatically read the message and send back required information after verification of Sender Number.
From: 03418205328
Text:Yard Balance = 258Crushing = 9,750Recovery = 9.73
