stm16_huawei_(osn_9500_&_7500)_modified

1

Hardware Requirements

In C Drive : Min 4GB Free

RAM Should be: 1GB

Operating System : XP,XP SP1,XP SP2,Vista Business

DVD Reader

2

Set IP Address to your LCT (Laptop/Desktop)

Start Control PanelNetwork ConnectionsRight Click on Local Area Connections Properties

3

Precautions for installing LCT Software

1) “Local Area Connection” Should be in Active (The LCT should be connected to a LAN, The LAN can be activated, we can use Sub

rack/Office LAN/ADSL modem)

2) Give the IP address 129.9.0.200

3) We can use any RJ45 ( Straight or Cross) Cable to access node

4) We have to create “LCT” (i.e that Folder name should be LCT) folder in “C Drive”, Copy the DVD in to that Folder. Then We have to follow the bellow steps.

4

Installation steps of iManagerT2000

Double click on the install.bat

Step 1

4

Mr.S.S.Reddy (Prithvi Informations Solutions Ltd.)

05/29/10

To Start Installation we have to type yes and press Enter

5



05/29/10

We have to type 5 and press Enter ( i.e We are going to install “MSDE Edition for NMS Release”

Step 2

6



05/29/10

Step 3

7



05/29/10

Step 4

8



05/29/10

Step 5

9

Installation Steps of iManagerT20009

Mr.S.S.Reddy (Prithvi Informations Solutions Ltd.) 05/29/10

Step 6

10



Step 7

11


Step 8

12


Step 9

13


Step 10

14


Step 11

15


Step 12 Step 13

16


Step 14

17


Step 15

This password is default, if you want to change we can change

18


Step 16

19


Step 17

We have to wait atleast ½ Hour for installation to complete

Finally click Finish

Its asking Restart your System YES or NO, Select YES ( The PC has to be restarted )

Step 18

20

Operation of iManagerT2000

How to login in to iManager T2000 First Login into “System Monitor” Next Login in to Client

Double click on the “” on your desktop.

20


User Name : adminPassword : T2000Server Name: Local

21

How to Start iManager T2000

Note:

We have to “wait until all the services should be start”. ( i.e Service Should be Running State),


22

How to Start iManager T2000

Note:

Now “T2000 System Monitor is Ready (i.e All the Services are in Running State), Now We have to Start “T2000 Client”


23

Operation of iManagerT2000

How to login in to iManager T2000 First Login into System Monitor Next Login in to Client

Double click on the “T2000-Client” on your desktop.

05/29/10Mr.S.S.Reddy (Prithvi Informations Solutions Ltd.)

23

User Name : adminPassword : T2000

24

Searching For NE

To Search NE, we have to click on Auto Discovery

25

Searching for NE (Adding the “lct” User)

Note:

1) Don’t use root user for NE search/login

2) So we have to add one more user (i.e Eg: LCT bangalore, LCT Anjimedu, LCT Adoni )

3) Password : password ( by Default )

26

Searching for NE

Select the lct user then click Next

27

Searching for NE

Wait up to Searching the all nodes in particular network

28

Searching for NE

If searching is completed, all the nodes are displayed here, now here one node is displayed

29

Searching for NE

User Name: lct

Password: password

30

Configure the NE

Right click on the NE Select “Configure”

31

Onfigure the NE( Manual Configuration)

If first time your going to configure the NE, select “Manual

Configuration”

Second time onwards it should be “Upload”

32

Manual Configuration

33


Self Type : Enhanced Sub rack

Remaining all the parameters are Default

34


Note:

Check ( Front & Rare Panel) the Configuration which is available in physical NE with the Result on this LCT( Front & Rare Panel), If it is correct (i.e its appearing all the boards correctly) click NEXT

In Rare Panel JSTI Card (Slot No 58), its not appearing if you Query Physical Information. S we have to right click on the particular slot Select “Add JSTI ”

36

Configured NE Status

If we want to work on that particular NE, Select that NE in NE Information List and Click on the “NE Explorer”

If our configuration is completed, once check the Status in NE Information List (i.e Configured/ unconfigured )

37

Open NE Explorer

38

Synchronization NE with NM Time

Select NE Time Synchronization

Select NM

39

Synchronization NE with NM Time

Right click on the NE,Select “Synchronize with NM Time”

40

Set NE Performance Monitoring Time

Select the NE after that Enable the 15-Minute Monitoring time Then Apply

41

Query Optical Power

Select Particular Optical Card, Under configuration Select

“Optical Power Management”, Then click on “Query”

stm16_huawei_(osn_9500_&_7500)_modified

Documents

prithvi informations

ne information

imanager t2000first

system monitor

synchronization

running state

front amp

rare panel