stock # item 22708 kreg r3 pocket make & take 52318 pocket...
TRANSCRIPT
Bean Bag Toss Game
OTHER MATERIALS
• Glue• Sandpaper• 1/4" x 2" carriage bolts
• 1/4" nuts and washers
• Finish nails
GET FROM ROCKLER
Stock # Item22708 Kreg R3 Pocket
Hole Jig52318 Pocket Hole ScrewsMake & Take
Make this Bean Bag Toss game. It’s tons of fun for the whole family!
Rockler
Series
© 2017 Rockler Companies Inc.
www.rockler.com800-279-4441
2 © 2017 Rockler Companies Inc.
1. BORE THE HOLES 2.BUILD THE FRAME 3. MARK THE LEGS
4. LOCATE AND DRAW CIRCLE 5. CUT THE PARTS 6. BUILD THE LEG SET
Use the long driver bit provided to drive screws through the pocket holes into the sides. No glue is required for this task.
Use a compass to draw the rounded end onto the leg components. Set the pieces aside. The rounded shape will be cut out later.
Use a compass to mark out the 6-inch circle for the bean bag hole. The hole is centered on the panel, 9 inches down from the end.
Use a handheld jigsaw to cut the legs to shape. Next, bore a 1/2" hole into the marked bag hole and use that for the blade access to cut out the hole.
Attach the legs to the leg support. Drive pocket-hole screws to secure the pieces.
Use a pocket-hole jig to drill the holes that will join the rails and stretcher to the sides. Secure the pieces with clamps before you drill.
1
1
10
2
3
4
4
5
6
7
8
9
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
3/4"
9"6" dia
12"
1/4" dia
3/4"
13/4" R.Cut to inside of line for clearance
13/4"
13/4"
23/4"
1"
1/4" dia
13/4"
© 2017 Rockler Companies Inc.
8. ATTACH THE DECK
7. ATTACH THE LEG SET
Attach the deck to the frame using glue and fi nish nails. Let the glue cure, then sand the game and paint it as you desire.
Clamp the leg set into the frame and drill holes through the legs and the frame for 1/4" carriage bolts. Mount the legs.
3
MATERIAL LIST (makes one set) T x W x L1 Deck (2) 1/2" x 24" x 48"2 Side Rails (4) 3/4" x 31⁄ 2" x 48" 3 End Rails and Stretcher (6) 3/4" x 31⁄ 2" x 221⁄ 2"4 Legs (4) 3/4" x 31⁄ 2" x 12"5 Leg Support (2) 3/4" x 31⁄ 2" x 203⁄ 4"
1
10
2
2
3
3
3
4
4
5
6
7
8
9
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
3/4" 3/4"
115/16"
1
1
10
2
3
4
4
5
6
7
8
9
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
3/4"
9"6" dia
12"
1/4" dia
3/4"
13/4" R.Cut to inside of line for clearance
13/4"
13/4"
23/4"
1"
1/4" dia
13/4"
LEG(SIDE VIEW)
BOLT HOLE LOCATION(SIDE VIEW)
HOLE LOCATION(TOP VIEW)