stoddard maxflex pop on polishing discs...order no. dp051 10.0 5.2 dp052 8.3 6.0 dp053 2.5 10.0...

ROTARYINSTRUMENTSROTARYINSTRUMENTS

August2013

ROUND

CYLINDERTAPER FLAT END TAPER ROUND END

CYLINDER

COARSE

FINE X-FINE

FLAME

MEDIUM

EGGPOINT BUD

POINT BUD EGG

FLAME

POINT BUD EGG

0.8 0.9 1.0 1.2

801/008M 801/009M 801/010M 801/012MISO Order No.

Length (mm) 1.4 1.6

801/014M 801/016M

3.0 3.0

835/009M 835/010M 835L/010M 835/012M 835/014M

3.0 4.0 4.04.0

835/008M

10.0 10.0 8.0 8.0

859/014F 859/016F 862/010F 862/012FISO Order No.

Length (mm)

3.0 3.0 4.0 4.0

835/009C 835/010C 835L/010C 835/012CISO Order No.

Length (mm) 4.0 8.0

835/014C 847/014C

10.0 10.0

848/014C 848/016C 848/018C 856/014C 856/016C

8.0 10.0 8.08.0

847/016C

10.0

850/014C

10.0 4.5

850/018C 368/018C 368/023C 379/018C 379/023C

10.0 5.0 4.53.5

4.5

368/018F 368/023F 379/018F 379/023F

5.0 4.53.5

850/016C

10.0 10.0 8.0 8.0

859/014XF 859/016XF 862/010XF 862/012XFISO Order No.

Length (mm) 4.5

368/018XF 368/023XF 379/018XF 379/023XF

5.0 4.53.5

HORSELEY DIAMOND BURSBULK PACKMedium Grit, 25 pcs/pack ...... $27.50Coarse Grit, 25 pcs/pack ........ $33.55Fine Grit, 25 pcs/pack ............. $33.55X-Fine Grit, 25 pcs/pack ......... $33.55

actual size

Buy 5 get 1 FREE (same number)

STODDARD MAXFLEX POP ON POLISHING DISCS

coarse (blue)stainless

steelmandrels

$26.95 $26.95 $26.95 $26.95

medium (purple) fine (pink) ultra-fine (white)

high shine polishing

• For contouring, finishing, polishing and high shine of all restoration surfaces, composite, amalgam, glass ionomer cement, semi-precious and precious metals • Single coated with aluminium oxide grit with a brass centre to ensure secure attachment to the mandrel

Buy 5 get 1 FREE (same Item)

max. 10’000 rpmmax. 10’000 rpm max. 15’000 rpmmax. 15’000 rpm

Grit

Indication

Diameter (mm)

Thickness (mm)

100 pcs/pack

1014 Maxflex Pop On Set240 Discs + 1 Mandrel

(30 x each size/grit disc)$68.75

10 pcs/pack$59.95

contouring

10.0

0.24

10.0

0.17

14.0

0.17

10.0

0.15

14.0

0.15

10.0

0.12

14.0

0.12

14.0

0.24

finishing polishing

Order No. MFD100CTP061 MFD104 MFD101 MFD105 MFD102 MFD106 MFD103 MFD107

ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-7192

Sundries

• Disposable felt polishers for an exceptionally high shine result (single use). Designed for use with deluxe diamond polishing paste• Finishing/reglazing takes 30 seconds or less

STODDARD MAXFLEX STRIPS

STODDARDMULTIPURPOSECERAMIC(FIBREGLASS) BURS RA

DELUXE DIAMOND POLISHING PASTE

DISPOSABLESTODDARD MINIFELT

STODDARD PROPHYLAXIS PASTE

coarse (blue)

$5.50$5.50

medium (purple) fine (pink) ultra-fine (white)

high shine polishing

Grit

Indication

Width & length (mm)

Thickness (mm)

50 pcs/pack

contouring

4 x 150

0.17 - 0.24

4 x 150

0.15 - 0.12

finishing polishing

Order No. MFS001 MFS002

• Made of highly flexible polyester and coated on one side with aluminium oxide particles• Ideal for contouring, finishing, polishing and high shine of all restoration surface, composite, amalgam, glass ionomer cement, semi-precious and precious metals

$29.15

L (mm)

Ø (mm)

5 pcs/pack

11.0

2.3

Order No. FB001

$29.15

11.0

3.3

FB002

$29.15

11.0

1.8

FB003

$29.15

10.0

2.3

FB004

$29.15

6.0

2.2

FB005

$29.15

5.0 trial pack contains 1piece each ofFB001, FB002,FB003, FB004,

FB005 and FB0063.3

FB006

$38.50

1015

• Can be used to remove cement, composites, adhesives and stains without risk of harming the enamel, ceramic, metals and soft tissues,• For orthodontics, periodontology, implantology and clinical process procedures in general.

max. 10’000 rpm

max. 5’000 rpm

$49.50 / 3 gm syringe

Grit

each package

unm

ount

ed

Order No. PASD003

• New improved formula and concentration of 2 - 4 microns diamond grit • Green coloured paste is lime flavoured for intra and extra -oral use and is excellent for final polishing of all restorative materals and natural teeth

$59.95

L (mm)

Ø (mm)

50 pcs/pack

3.0

2 - 4 чm

9.0

Order No. FP001

$59.95

5.0

9.0

FP002

$24.75

3.5

12.0

FP003

MaterialCTP033 Mandrels

for Minifelt (unmounted)10 pcs/pack ... $19.80



Buy 5 get 1 FREE

Buy 5 get 1 FREE

Buy 5 get 1 FREE

$6.60 / 50 gm pot $6.60 / 50 gm pot

RAD Value

Grit & Colour

each package

120

fine (yellow)

Order No. PAS009

170

medium (pink)

PAS001

Flavour

• Available in a fine and medium blend of mint flavoured paste• Formulated to have an easy to use consistency without causing splatter• Made of 100% natural ingredients and does not contain flouride

hard felt soft

mint

ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719 3

Polishing

STODDARDSICA OCCLUSALBRUSHES RA

STODDARDDIAMONDBRUSHES RA

STODDARDMINI PROPHYCUPS RALATEX FREE

STODDARD PROPHYPOINTS LATEX FREE

$24.75 $24.75 $24.75

Trim (mm)

Ø (mm)

10 pcs/pack

7.0

5.0

Order No. JC/SICRA/B

5.0

6.0

KS/SICRA/C KS/SICRA/D

5.0

6.0

max. 5’000 rpm

max. 10’000 rpm

max. 10’000 rpm

max. 10’000 rpm

max. 5’000 rpm

Buy 5 get 1 FREE

Buy 5 get 1 FREE

Buy 5 get 1 FREE

Buy 5 get 1 FREE

3001 SICA Occlusal Brush Set9 pcs/set ... $24.75/set

3022 DIA Brush Set9 pcs/set ... $59.95/set

• High gloss polishing of restorations made of composites, compomers and glass ionomer cements• Loaded with fine silicone carbide, no polishing paste required• One step finishing and polishing• Faster and more efficient than polishing paste systems• Very economical• Low heat generation• Autoclavable

$59.95 $59.95 $59.95

Trim (mm)

Ø (mm)

10 pcs/pack

7.0

5.0

Order No. JC/DIA/A

5.0

6.0

KS/DIA/A/001 KS/DIA/A/002

5.0

6.0

• No polishing paste required• One step finishing and polishing• Faster and more efficient than polishing paste systems• Very economical• Low heat generation• Autoclavable for reuse• For composite,ceramics,amalgam, precious non-precious metals and natural teeth

Comparisons between Standard Prophy Cups RA and MINI Prophy Cups RA

Comparisons between Standard ProphyCups screw type and SMART MINI Prophy Cups screw

22mm

10mm

18mm

6mm

13mm

10mm

10mm

6mm

$38.50

stiffness

colour

100 pcs/pack

pink

soft

Order No. PSMRA001

$38.50

purple

medium

PSMRA002

$38.50

blue

hard

PSMRA003

$38.50

stiffness

colour

100 pcs/pack

pink

soft

Order No. PSMSC001

$38.50

purple

medium

PSMSC002

$38.50

blue

hard

PSMSC003

• MINI Prophy cups are shorter• Cups provide fast and efficient polishing where the space is restricted• Specially designed to clean and polish children’s teeth or any other restricted areas• Cups are approximately half the size of standard range

Stiffness

Colour

100 pcs/pack

Order No.

$38.50

purple

medium

TPY811 TPY812

STODDARDMINI PROPHYCUPS SCREWLATEX FREE

PREMIUMPLUS TM

PROPHY BRUSHES RA JUNIOR

M268BBristle

M268NNylon

P268BBristle

P268NNylon

actualsize

Prophy Brushes RA Junior, 144 pcs/boxM268B Metal Bristle .......... $59.95M268N Metal Nylon ........... $49.50P268B Plastic Bristle ......... $44.55P268N Plastic Nylon .......... $38.50

Buy 5 get 1 FREEBuy 10 get 3 FREEBuy 20 get 8 FREEBuy 40 get 20 FREE

(same number)


Polishing

$38.50 $38.50 $38.50 $38.50

L (mm)

Ø (mm)

5 pcs/pack

7.0

polishing

3.3

Order No. DP101

10.0

5.2

DP102

8.3

6.0

DP103

2.5

10.0

DP104

$38.50 $38.50 $38.50 $38.50

7.0

fine-polishing

3.3

DP111

10.0

5.2

DP112

8.3

6.0

DP113

2.5

10.0

DP114

Indication

max. 20’000 rpm

max. 20’000 rpm

max. 20’000 rpm

max. 20’000 rpm

• Synthetic latex free rubber with diamond grit• Efficient and effective finishing of all composites, ceramics, compomer and Glassionomer in just 2 steps• High performance diamond polishers eliminate the need for a pre-polishing step• Less time required for finishing and polishing• Eliminates the need for glazing• No heat build-up or grooving• Prevents formation of micro-cracks• High lustre polishing and smoothing

STODDARD DIA-DUPLEX POLISHERS RA (2 step multipurpose)

STODDARD DIA-COMP POLISHERS RA (3 step)

STODDARD COMPO POLISHERS RA (single step)

Buy 5 get 1 FREE(same Item)

1001 Dia-Comp Set12 pcs/set ... $137.50



1004 Comp Set12 pcs/Set ... $27.50

$49.50 $49.50 $49.50 $49.50

L (mm)

Ø (mm)

5 pcs/pack

7.0

pre - polishing

3.3

Order No. DP031

10.0

5.2

DP032

8.3

6.0

DP033

2.5

10.0

DP034

$49.50 $49.50 $49.50 $49.50

7.0

polishing

3.3

DP041

10.0

5.2

DP042

8.3

6.0

DP043

2.5

10.0

DP044

Indication

$49.50 $49.50 $49.50 $49.50

L (mm)

Ø (mm)

5 pcs/pack

7.0

fine - polishing

3.3

Order No. DP051

10.0

5.2

DP052

8.3

6.0

DP053

2.5

10.0

DP054

Indication

• Three-step polishing system for composites, compomer and glassionomer• Synthetic latex free rubber with diamond grit

$22.55 $22.55 $22.55 $22.55

L (mm)

Ø (mm)

10 pcs/pack

6.0

satin finish

3.3

Order No. S151 S152 S153 S154

10.0

5.2

9.5

7.0

8.5

9.0

Indication

• Single-step polishing system for composite, blending and natural teeth• Synthetic rubber, latex free

1012 Dia-Duplex Set8 pcs/set ... $59.95


Sundries

STODDARDDEPTH MARKERS FG

STODDARD MICRO PREPARATION DIAMOND BURS FG

STODDARD SINTERED DIAMOND DISC RA

max. 20’000 rpm

max. 300’000 rpm

max. 300’000 rpm

Buy 5 get 1 FREE Buy 5 get 1 FREE

4005 Micropreparation SetMedium

6 pcs/set ... $27.50

4006 Micropreparation SetFine

6 pcs/set ... $27.50

$24.755 pcs/pack

6.0

1.6

6.0

2.1

L (mm)

Ø (mm)

0.3 0.5T (mm)

ISO Order No. D834.016 D834.021

$24.75each

0.3

9.5

L (mm)

Ø (mm)

Order No. SD70

• The 127 µm grit size has a high cutting capacity that ensures all types of crowns can be quickly separated• The diamond grit cuts through gold, porcelain, non-precious metals and even zirconia

Sintered diamond disc specially for separating crowns

$24.75 $24.755 pcs/pack

2.7

0.9

2.7

0.7

Fine Order No.

Medium Order No.

Length (mm)

Ø (mm)

ISO No. D830R D889

D830RM D889M

D830RMF D889MF

$24.75

2.0

1.4

D953

D953M

D953MF

$24.75

2.5

1.4

D953

D953AM

D953AMF

$24.75

2.7

0.7

D838

D838M

D838MF

$24.75

2.7

1.2

D830

D830M

D830MF

Micro preparation requires specially designed instruments with a small working head, but with a long neck for better vision.Produces excellent results with high precision and durability

Advantages:• Better vision during the preparation• Precise material reduction due to the choice of different diamond particle sizes• Minimal invasive cavity shaping• Maximum preservation of the tooth

Buy 5 get 1 FREE(same Item)

$59.95

L (mm)

Ø (mm)

5 pcs/pack

11.0

1.6

Order No. C151

max. 300’000 rpm

For a variety of procedures:-• Initial endodontic access• Sectioning of impacted molars• Separating roots• Removing a broken root stump• Cutting a tooth horizontally

STODDARD ENDO ICARBIDE BURS FGXL

$24.75

L (mm)

Ø (mm)

5 pcs/pack

10.0

1.4

Order No. D857

max. 300’000 rpm

STODDARD DIA ENDO I DIAMOND BURS FG

STODDARD ENDO II CARBIDE BURS FGXL

$59.95

L (mm)

Ø (mm)

5 pcs/pack

9.0

1.6

Order No. C152

max. 300’000 rpm

STODDARD ENDO II DIAMOND BURS FG

$24.75

L (mm)

Ø (mm)

5 pcs/pack

10.0

1.4

Order No. D802K

max. 300’000 rpm


Buy 5 get 1 FREEBuy 5 get 1 FREE

After initial penetration, these long, tapered burs create a funnel shape for easier access in the pulp chamber. The rounded, non-cutting safe-end tip prevents penetration of the pulp chamber floor or the root canal walls

Safe ended tip diamond burs used to remove the pulp chamber roof withoutdamaging the chamber floor

The DIA-ENDO II is a combination of a round and cone shaped diamond which allows access into the pulp chamber and preparation of the chamber walls, in one operation


Sundries

$77.55

Size Ø ¹/10 (mm)

L (mm)

6 pcs/pack

10.0

050

Order No. 1332RA

$77.55

6.0

030

1333RA

$68.75 $68.75 $68.75 $68.755 pcs/pack

Order No.

$49.50

Size Ø ¹/10 (mm)

L (mm)

12 pcs/pack

10.0

050

Order No. 0352RA

$49.50

10.0

050

0362RA

$49.50

10.0

050

0372RA

STEP 1 2 3

OrthoFlex Polisher (adhesive remover)There are several methods used for removal of residual resin after debonding of orthodontic brackets. Therefore, the method of removal of the residual resin is very important to avoid damages on enamel. However, carbide burs are harder than enamel and when used at high speed, can damage the underlying enamel. We recommend using our new developed OrthoFlex Polisher which produces the finest scratch pattern with the least enamel loss. Advantages of the OrthoFlex polisher: Used for reliable, gentle removal of residual adhesive without damaging the natural tooth structure achieved by a special grit, which despite having a high polishing capacity is not harder than the natural tooth structure. Especially reliable alternative to adhesive or cement residue removal using rotary diamond or metal instruments. After removal of the adhesive the teeth are re-polished using: Exa Cerapol 1 = pre-polishing enamel, 2 = polishing enamel, Cerapol Super 3 = natural high-lustre polish.

Exa CerapolCerapol Super

ORTHOFLEX POLISHERS RA (adhesive remover)

OrthoFlex

max

. 15’

000

rpm

max

. 15’

000

rpm

max

. 160

’000

rpm

max

. 160

’000

rpm

max

. 20’

000

rpm

max

. 20’

000

rpm

max

. 10’

000

rpm

max

. 10’

000

rpm

max

. 5’0

00 rp

m

Buy 5 get 1 FREE(same number)

Buy 5 get 1 FREE

Buy 5 get 1 FREE

EDENTA INTRAORAL FINISHING BURS FG WORK ON TITANIUM

Intraoral Trimming of Titanium AbutmentsThe use of titanium abutments in implant prosthetics requires special instruments for adjustments and adaptation, for example recontouring for adapting the path of insertion of the restoration on the titanium abutments. The tungsten carbide instruments with a coarse cross-cut, which were specially developed for trimming titanium alloys, guarantee optimal contouring of titanium materials (Figure 1). The titanium surfaces are then finished using the congruently shaped red ring finishers (Figure 2).

TC847KRG.FG.016

(1)

TC336.FG.016

(2)

CONTOURING FINISHING

TC847KRG.FG.016

TC379G.FG.023 TC336.FG.016 TC379.FG.023

EDENTA ADHESIVE REMOVERS RA The perfect completion of a bracket treatment. New adhesive remover, specially designed for this task.Removes adhesive residues, does not damage the enamel and creates smooth surfaces.

C22

ALG

KR

A01

6

C22

AG

KR

A01

6

• Available in RA shank for use in contra-angle handpieces• The special blades remove the resin without injuring the tooth• The safety bevel at the end of the blades reduces the risk of cutting

striations in the enamel surface• The various lengths of blade simplify trimming smaller and larger areas• The safe-tip prevents injury to the gingival margin

Smooth dome-shaped instrumenthead for gingival protection

Safety chamfer sectionto void flute forming

Single Size, 6 pcs/box … $99.55


$99.55

Buy 5 get 1 FREE

Buy 5 get 1 FREE

Buy 5 get 1 FREE

EDENTA DIAMOND FINISHING STRIPS

For contouring the proximal regions of all types of fillingsRemoving excess material from the proximal regions offilling-materials like composites,acrylics,glass ionomercements and amalgamRemoving excess cement after placing inlays,onlays andlaminate veneers

Contours the proximal regions anatomicallySimplifies working procedures through the serrated edgewhich separates interdental spaces quicklyThe serrated diamonds strips have wider non-diamondcoated area,which simplifies sawingSerrated sawing edge and diamond-coated abrasive areacombined in one instrument simplifies working proceduresMade of highly stable stainless steel to resist breaking andstretching for an economical service lifeAutoclavableLength: 147mm

DIAMOND FREE AREA

DIAMOND FREE AREA SERATED EDGE

FINE (serrated edge)

SUPER FINE (serrated edge)

MEDIUM FINE SUPER FINE

MEDIUM FINE SUPER FINE

40MM

16MM

Grit

Order No.

Medium45μm

Fine30μm

Super Fine15μm

Medium45μm

Fine30μm

Super Fine15μm

Fine30μm

Super Fine15μm

• DS2 • FDS2 • CDS2 • FDS3• DS3 • CDS3 • FXDS3 • CXDS3

Thickness (mm) 0.13 0.10 0.08 0.13 0.10 0.10 0.10 0.08

Width (mm) 2.5 2.5 2.5 3.75 3.75 3.75 3.75 3.75

Applications••

•

Advantages••

•

•

•

••

0.15" (3.75mm)

0.15" (3.75mm)

0.1" (2.5mm)

0.15" (3.75mm)

serrated edge serrated edge

DIAMOND FREE AREA

40MM

EDENTA WIDE DIAMOND FINISHING STRIPS (contouring the side of the overlapping teeth)

Wide Diamond Strips are designed for Interproximal reduction (IPR) also known as „tooth stripping“ or „interdental reduction.” IPR is a procedure in which part of the thickness of a tooth’s enamel is trimmed where space is needed for orthodontic realignment.The wide diamond strips, which facilitates the contouring of enamel, will also reduce many types of dental materials. It enables the often necessary reduction of the interproximal tooth structure, correcting inadequate space, caused by an insufficient arch length. Interproximal re-contouring is easily achieved in a minimum time with a more natural finish. Single sided wide diamond strips are perfect for situations where you want to reduce tooth structure on one side only without any damage or marking to the adjacent tooth. Reusable, autoclavable, length 147mm.

Grit

10 pcs/box

45 µm

Thickness (mm) 0.13

Width (mm) 6.0

$99.55

30 µm

0.10

6.0

$99.55

15 µm

0.06

6.0

Order No. ● DS6 ● FDS6 ● CDS6

PXDS3 PFXDS3PCXDS3

single side coated

Serra ted

Serra ted

EDENTA PERFORATED DIAMOND STRIPS (serrated edge, coated on one side)

Perforated Diamond Strips are designed for complete control during interproximal reduction, shaping, and contouring.Strips allow easy access and precise manual enamel reduction resulting in a smooth, natural finish. Perforated design assists in debris removal, provides improved visibility, control, and flexibility; easier approximal contouring due to quick interdental separation with 40 mm diamond-free zone with saw cut. Minimum effort required due to saw cut and diamond cutting surface in one instrument. Single-sided stain-less steel strip resistant to breaking and stretching, reusable,autoclavable, length 147mm.

$88.00

$88.00 $88.00 $88.00 $88.00 $88.00 $88.00 $88.00 $88.00

$88.00 $88.00

Grit

10 pcs/box

10 pcs/box

45 µm

Thickness (mm) 0.13

Width (mm) 3.75

30 µm

0.10

3.75

15 µm

0.06

3.75

Order No. ● PXDS3 ● PFXDS3 ● PCXDS3

DS6

FDS6

CDS6

single side coated

Diamond Finishing Strips


Sundries

max

. 100

’000

rpm

opt.

80’

000

rpm

max

. 100

’000

rpm

max

. 120

’000

rpm

max

. 120

’000

rpm

max

. 160

’000

rpm

max

. 120

’000

rpm

max

. 120

’000

rpm

Buy 5 get 1 FREE

Buy 5 get 1 FREE

Buy 5 get 1 FREE

Buy 5 get 1 FREE

Buy 5 get 1 FREE (same number)

1,5

8,5

GF844 TwoGrit DiamondSpecial diamond instrument used for preparing and finishing without changing the instrument when preparing for a veneer. The working section of the TwoGrit diamond instruments consists of two different diamond grits.The main conical section is coated with coarse diamond grit and the tip with fine diamond grit. The coarse grit enables rapid material removal and the fine diamond grit of the tip guarantees a perfectly finished preparation margin. Speed opt. 70,000 - 140,000 rpm.

opt.

70’0

00 -

140’

000

rpm

opt.

70’0

00 -

140’

000

rpm

$59.55

L (mm)

5 pcs/box

014 016

Order No. GF844FG012

$59.55

10.0 10.0

GF844FG016

Size Ø ¹/10 (mm)

$77.55

L (mm)

5 pcs/box

009 009

Order No. H152FG009

$77.55

9.0 9.0

H152FGL009

Size Ø ¹/10 (mm)

$24.75

L (mm)

5 pcs/box

013 016

Order No. 802LFG013

$24.75

10.0 10.0

802LFG016

021

$27.50

10.0

802LFG021

Size Ø ¹/10 (mm)

$68.75

L (mm)

3 pcs/box

014

Order No. G254FGXXL014

6.0

Size Ø ¹/10 (mm)

$68.75

L (mm)

3 pcs/box

016

Order No. D254FGXXL016

10.0

Size Ø ¹/10 (mm)

GF844

ROUND END TAPER

EDENTA TWOGRIT DIAMOND BURS FG

H152 EndoburSpecial endodontic drill with a long, conical blade configuration for producing a funnel-shaped access into the pulp chamber. The rounded, safe end drill tip prevents penetration into the root canal walls and the floor of the pulp chamber during drilling. Maximum motor speed 120,000 rpm, apply only light pressure during preparation.

EDENTA H152 ENDO CARBIDE BURS FG/FGL

EDENTA 802L ENDO DIAMOND BURS FG

EDENTA SURGERY DIAMOND BURS FGXXL

EDENTA SURGERY DIAMOND BURS FGXXL

H152

CONICAL SPECIALLY LONG

802L EndoburSpecial endodontic drill for reducing the pulp chamber roof and extending the access opening for successful root canal treatment. The long diamond coated instrument neck facilitates in producing a straight access to the root canal and creating a funnel-shaped access to the pulp chamber. The special diamond grit guarantees rapid and gentle removal of the tooth structure. Speed opt. 120,000 – 160,000 rpm. Apply only light pressure during preparation.

802L

LONG ROUND WITH COLLAR

G254 Surgery DiamondSurgery diamond instrument used for removal and smoothing of bone surfaces as well as separation of teeth and effectivemachining of the tooth structure in tooth osteotomy. The special design and coordinated diamond grit guarantee gentle trimmingof the bone and tooth structure with minimal heat build-up. Speed max. 100,000 rpm. Apply only light pressure during preparation.

G254SurgeryDiamond

D254 Surgery DiamondSurgery diamond instrument used for atraumatic separation of teeth and effective machining of the tooth structure duringapicectomy. The coordinated diamond grit guarantees gentle trimming of the tooth structure with minimum heat build-up. Not recommended for machining bone. Speed max. 100,000 rpm. Apply only light pressure during preparation.

D254

SurgeryDiamond

3mm

10°

Diamond coated bone cutter for bone incisions, removaland precision finishing. Also ideal for severing tooth roots.

Advantages:The combination of special shaping and diamond coating results inclose contact with bone structure, less heat development as well as abetter removal of bone chips and tooth structure.

Always cool the area properly.

Grit:green/coarse = 151 µm - ISO 534

EDENTA OSTEOTOM GSD1 SURGICAL DIAMOND BURS

• Tungsten carbide bone cutter C163A with A cut design foroptimum cutting capacity and precise preparation

• Atraumatic treatment provided by optimum chip removal, resultingin improved surface quality of the prepared bone material

• The high stability of the tungsten carbide bone cutter and the A cutdesign ensure optimum cutting capacity

EDENTA C163A TUNGSTEN CARBIDE BONE CUTTERSMinimally Invasive and Precise Preparation in Oral Surgery

C163A.014HP Bone Cutter 3 pcs/box .... $115.50C163A.014RA Bone Cutter 3 pcs/box .... $115.50

C163A.014HP

C163A.014RA

Max. 100,000 rpmAlways use with water coolant

actual size

Order No.HP Order No. GSD1

01612.0

FG016

$89.65

01812.0

RA018FG018

$89.65

02112.0

HP021RA021FG021

$99.55

02312.0

HP023RA023

$99.55

RA Order No. GSD1FG Order No. GSD13 Diamond Burs

per box

ISO Size 1/10 mmLength (mm)

actualsize

RAL Order No. C141RAXL Order No. C141

HP Order No. C141027

HP027RAL027

RAXL027

$68.75

031HP031

RAL031RAXL031

$68.75

035HP035

RAL035RAXL035

$77.55

040HP040

RAL040RAXL040

$94.05

050HP050

RAXL050

$99.003 Carbide Bursper box

ISO Size 1/10 mm

RAL Order No. C141ARAXL Order No. C141A

HP Order No. C141A027

HP027RAL027

RAXL027

$77.55

031HP031

RAL031RAXL031

$77.55

035HP035

RAL035RAXL035

$94.05

040HP040

RAL040

$99.00

050HP050

$115.503 Carbide Bursper box

1ISO Size /10 mm

EDENTA ORAL SURGERY CARBIDE BURSHP/RAL/RAXLactual sizeC141AC141HP length = 44mm

RAL length = 26mmRAXL length = 34mm

Buy 5 get 1 FREE

Buy 5 get 1 FREE



Burs

EDENTA C254A TUNGSTEN CARBIDE BONE CUTTERS FGXL/FGXXL

C254AFGXL012

C254AFGXXL012

C254A Bone CutterBone cutter used for preparing bone and tooth structure. The special A-cut blades guarantee very quiet instrument running at the highest cutting capacity with maximum conservation of the tooth structure to be prepared. The long, slimline neck provides excellent visibility during preparation. Indications: Exposing and removing impacted wisdom teeth, apicectomies, preparation of bone structure and a bone lid, separating teeth and tooth roots. Drive: Only use a micromotor and red contra-angle. Do not use in a turbine as there is the risk of injury. Speed opt. 80,000 rpm. Apply only light pressure during preparation.

opt.

80’0

00 rp

m

max

. 100

’000

rpm

$99.55

L (mm)

3 pcs/box

012 012

Order No. C254AFGXL012

$99.55

6.0 6.0

C254AFGXXL012

C254A

BONE CUTTER

Size Ø ¹/10 (mm)


(same unmber)

Oral Surgery Bur HP/RAeach … $11.55

EDENTA LINDEMANN ORAL SURGERY CARBIDE BURS HP/RAL/FGXL/RAXL

Length (mm)

RAL Order No.RAXL Order No.

FG Order No.3 Carbide Burs

per box

HP Order No.

C1610169.0

C161HP016C161RAL016

C161RAXL016C161FGXL016

$94.05

C1620169.0

C162HP016C162RAL016

C162RAXL016C162FGXL016

$99.00

C16602110.0

C166HP021C166RAL021

C166RAXL021

$99.00

C16702310.0

C167HP023

C167RAXL023

$99.00

ISO Size 1/10 mmNo.

actualsize

actualsize

C161C162 C166 C167

HP length = 44mmRAL length = 26mmRAXL length= 34mmFGXL = 25mm

Shape Fissure Round Round

ORAL SURGERY BURS HP/RATUNGSTEN CARBIDE

Buy 5 get1 FREE

(same number)


actualsize

023 RA023 HP016 HPSize

Fig No.ISO Ref.

Length mm

100801/008

0.8100

$16.50

101801/009

0.9101

$16.50

102801/010

1.0102

$16.50

103801/012

1.2103

C103

$18.15

104801/014

1.4104

C104

$16.50

105801/016

1.6105

C105

$19.80

106801/018

1.8106

C106

F106

$19.80

360801/021

2.1360

C360

F360

XF360

$22.00

361801/023

2.3361

C361

F361

XF361

$22.00

362801/025

2.5362

C362

F362

XF362

$24.75

410801/031

3.1410

C410

F410

XF410

$24.75

105L801L/016

1.6105L

C105L

$24.755 Diamond Bursper box

131806/009

2.0131

$16.50

132806/010

2.0132

C132

$16.50

133806/012

3.0133

C133

$18.15

134806/014

3.0134

C134

$18.15

135806/016

3.0135

$19.80

136806/018

3.0136

$19.80

ROUND INVERTED CONE WITH COLLAR

Fig No.ISO Ref.

Length mm

120805/008

1.0120

$16.50

121805/009

1.0121

$16.50

122805/010

1.0122

C122

$16.50

123805/012

1.2123

C123

$18.15

124805/014

1.6124

C124

$18.15

125805/016

1.6125

C125

$19.80

126805/018

1.6126

C126

$19.80

226807/014

4.0226

C226

$19.80

227807/016

4.0227

C227


230830/010

2.7230

C230

$16.50

230B830/012

2.7230B

C230B

$18.15

231830/014

2.7231

C231

$18.15

232830/016

2.7232

C232

$19.80

366A830L/014

5.0366A

C366A

F366A

XF366A

$19.80

366830L/016

5.0366

C366

F366

XF366

$22.00

367830L/018

5.0367

C367

F367

XF367

$22.00

368830L/022

5.0368

C368

F368

XF368

$24.75

525832/033

5.0525

C525

$24.75

305847/012

8.0305

C305

$19.80

237846/016

6.0237

C237

$22.00

236846/014

6.0236

C236

$19.80

235846/012

6.0235

C235

$19.80

306847/014

8.0306

C306

$19.80

307847/016

8.0307

C307

$22.00

308847/018

8.0308

C308

$22.00

401847/021

8.0401

C401

$24.75

409847/025

8.0409

C409

$24.75

310848/012

10.0310

C310

$19.80

311848/014

10.0311

C311

$19.80

312848/016

10.0312

C312

$22.00

313848/018

10.0313

C313

$22.00

402848/021

10.0402

C402

$24.75

411848/025

9.0411

C411

$24.75

403848L/018

12.0403

C403

$24.75

PEARINVERTED CONE

Fig No.ISO Ref.

Length mm

201835/008

3.0201

$16.50

201B835/009

3.0201B

C201B

$16.50

202835/010

3.0202

C202

$16.50

203835L/010

4.0203

C203

$16.50

204835/012

4.0204

C204

$18.15

205835/014

4.0205

C205

$18.15

206A836/010

6.0206A

C206A

$19.80

206836/012

6.0206

C206

$19.80

206B836/014

6.0206B

C206B


301837/012

8.0301

C301

$22.00

302837/014

8.0302

C302

$22.00

302B837/016

8.0302B

C302B

$24.75

303837/018

8.0303

C303

$24.75

276836KR/018

6.0276

C276

$24.75

238836KR/012

6.0

C238

$22.00

431836KR/023

6.0431

C431

$24.75

301A837KR/012

8.0301A

C301A

$22.00

302A837KR/014

8.0302A

C302A

$22.00

303A837KR/018

8.0303A

C303A C433

$24.75

433837KR/023

8.0433

$24.75

263846KR/018

6.0263

C263

$24.75

463846KR/023

6.0463

$24.75

355847KR/018

8.0355

C355

$24.75

455847KR/023

8.0455

C455

$24.75

CYLINDER

CYLINDERROUND EDGE

TAPER ROUND EDGE

Fig No.ISO Ref.

Length mm

243849/009

4.0243

$16.50

244849/010

4.0244

$16.50

245849/012

4.0245

$18.15

246849/014

4.0246

$18.15

250855/010

6.0250

$19.80

251855/012

6.0251

$19.80

252855/014

6.0252

C252

$19.80

253855/016

6.0253

C253


TAPER ROUND END

270838/008

3.0270

$16.50

270B838/009

3.0270B

C270B

$16.50

271838/010

3.0271

C271

$16.50

272838L/010

4.0272

C272

$16.50

273838/012

4.0273

C273

$16.50

347881/010

8.0347

C347

F347

$19.80

348881/012

8.0348

C348

F348

$19.80

349881/014

8.0349

C349

F349

$19.80

349B881/016

8.0349B

C349B

$22.00

349C881/018

8.0349C

C349C

$22.00

350882/012

10.0350

C350

F350

$22.00

351882/014

10.0351

C351

F351

$22.00

CYLINDER ROUND END

Fig No.ISO Ref.

Length mm

281853/010

4.0281

F281

XF281

$19.80

283852/010

6.0283

F283

XF283

$19.80

284852/012

6.0284

F284

XF284

$19.80

330858/010

8.0330

F330

XF330

$19.80

331858/012

8.0331

F331

XF331

$19.80

332858/014

8.0332

F332

XF332

$19.80

333858/016

8.0333

F333

XF333

$22.00

335859/010

10.0335

F335

XF335

$19.80

336859/012

10.0336

C336

F336

XF336

$19.80

336B859/014

10.0336B

C336B

F336B

XF336B

$19.80

337859/016

10.0337

C337

F337

XF337

$22.00

338859/018

10.0338

C338

F338

XF338

$22.00

412859/021

10.0412

C412

F412

XF412

$24.75

336L859L/012

11.5336L

C336L

F336L

XF336L

$24.75

337L859L/016

11.5337L

C337L

F337L

XF337L


POINTED CONE

TAPER FLAT END

INT

ER

PR

OX

IMA

L

378392/016

5.0378

F378

XF378

$22.00

HORSELEYDIAMONDBURS FG

actual size


Diamond Burs FG

For every 2 boxes ofHorseley Diamond Burs FG purchased(any mix)

get one N050 Bur Dispenser (FG or MIX) FREE(for Bur Dispenser details,please refer to page 11)

orBuy 5 get 1 FREE Buy 10 get 3 FREE

Buy 20 get 8 FREE Buy 40 get 20 FREE(same number)

Fig No.ISO Ref.

Length mm

Fig No.ISO Ref.

Length mm

Fig No.ISO Ref.

Length mm

320A856/010

8.0320A

C320A

F320A

XF320A

$19.80

320856/012

8.0320

C320

F320

XF320

$19.80

321856/014

8.0321

C321

F321

XF321

$19.80

322856/016

8.0322

C322

F322

XF322

$22.00

323856/018

8.0323

C323

F323

XF323

$22.00

344A863/012

10.0344A

C344A

F344A

XF344A

$22.00

323B856B/018

8.5323B

C323B

$22.00

344B863/014

10.0344B

C344B

F344B

XF344B

$22.00

404856/021

8.0404

C404

$24.75

344C863/016

10.0344C

C344C

F344C

XF344C

$22.00

417856/025

8.0417

C417

$24.75

344863/018

10.0344

C344

F344

XF344

$24.75

372C878K/018

8.0372C

C372C

F372C

$24.75

405878K/021

8.0405

C405

F405

$24.75

373A879K/010

10.0373A

C373A

$22.00

324850/012

10.0324

C324

F324

XF324

$19.80

446863/024

10.0446

C446

F446

XF446

$24.75

373B879K/012

10.0373B

C373B

F373B

$22.00

373C879K/014

10.0373C

C373C

F373C

$22.00

373879K/016

10.0373

C373

F373

$22.00

374879K/018

10.0374

C374

F374

$24.75

408879K/021

10.0408

C408

F408

$24.75

218877/012

6.0218

C218

F218

$19.80

217877/010

6.0217

C217

F217

$19.80

216876/010

4.0216

C216

F216

$19.80

315878/010

8.0315

C315

F315

$19.80

316878/012

8.0316

C316

F316

$22.00

317878/014

8.0317

C317

F317

$22.00

318A879/012

10.0318A

C318A

F318A

$22.00

318879/014

10.0318

C318

F318

$24.75

319879/016

10.0319

C319

F319

$24.75

256884/010

6.0256

C256

F256

$19.80

257884/012

6.0257

C257

F257

$19.80

352A885/010

8.0352A

C352A

F352A

$19.80

352885/012

8.0352

C352

F352

$22.00

352B885/014

8.0352B

C352B

F352B

$22.00

357A886/012

10.0357A

C357A

$22.00

357886/014

10.0357

C357

$24.75

358886/016

10.0358

C358

$24.75

324B850/014

10.0324B

C324B

F324B

XF324B

$19.80

325850/016

10.0325

C325

F325

XF325

$22.00

326850/018

10.0326

C326

F326

XF326

$22.00

326B850B/018

10.5326B

C326B

$24.75

406850/021

10.5406

C406

$24.75

Medium Order No.Without Ring 115

Medium Order No.Without Ring 115μm


Coarse Order No.Green Ring 150

Coarse Order No.Green Ring 150μm

Coarse Order No.Green Ring 150μm

Fine Order No.Red Ring 60

Fine Order No.Red Ring 60μm

Fine Order No.Red Ring 60μm

Superfine Order No.Yellow Ring 20μm

Superfine Order No.Yellow Ring 20

Superfine Order No.Yellow Ring 20μm

5 Diamond Bursper box



TAPER ROUND END (CHAMFER)

435909/037

1.0435

C435

$22.00

436909/041

1.0436

C436

$22.00

516909/046

1.5516

C516

$24.75

WHEELROUND EDGE

419899/027

7.0419

C419

$24.75

400811/031

4.0

C400

$24.75

500811/032

4.2500

C500

$24.75

501811/037

7.0501

C501

$24.75

502811/047

7.0502

C502

$24.75

BARREL

340862/010

8.0340

C340

F340

XF340

$19.80

341862/012

8.0341

C341

F341

XF341

$19.80

342862/014

8.0342

C342

F342

XF342

$22.00

343862/016

8.0343

C343

F343

XF343

$22.00

FLAME

165889/009

3.5165

F165

XF165

$19.80

FLAME

286860/010

4.0286

C286

F286

XF286

$19.80

287860/012

5.0287

C287

F287

XF287

$19.80

288860/014

5.0288

C288

F288

XF288

$19.80

289860/016

5.0289

C289

F289

XF289

$22.00

FLAME

255379/014

3.0255

C255

F255

XF255

$19.80

396379/018

3.5396

C396

F396

XF396

$22.00

416379/023

4.5416

C416

F416

XF416

$24.75

EGG

241368/016

3.5241

C241

F241

XF241

$19.80

296368/018

4.5296

C296

F296

XF296

$22.00

300368/023

5.0300

C300

F300

XF300

$24.75

530369/033

5.5530

C530

$24.75

POINTED BUD

220877K/012

7.0220

C220

F220

$19.80

221877K/014

7.0221

C221

F221

$19.80

222877K/016

8.0222

C222

F222

$22.00

223877K/018

7.0223

C223

F223

$22.00

GINGIVAL CURETTAGE

BEVELED CYLINDER

372B878K/016

8.0372B

C372B

F372B

$22.00

370878K/010

8.0370

C370

F370

$19.80

371878K012

8.0371

C371

F371

$19.80

372878K/014

8.0372

C372

F372

$22.00

HORSELEYDIAMONDBURS FG

Fig No.ISO Ref.

Length mm

Fig No.ISO Ref.

Length mm

S101S801/009

0.9S101

$22.00

S103S801/012

1.2S103

$22.00

S105S801/016

1.6S105

$22.00

S106S801/018

1.8S106

$22.00

S360S801/021

2.1S360

$22.00

S132S806/010

2.0S132

$22.00

S133S806/012

3.0S133

$22.00

S201S835/008

3.0S201

$22.00

S201BS835/009

3.0S201B

$22.00

S202S835/010

4.0S202

$22.00

S203S835L/010

4.0S203

$22.00

S204S835/012

4.0S204

$22.00

S283S852/010

6.0S283

$27.50

S300S368/023

5.0S300

$27.50

S368S830L/022

5.0S368

$27.50





actualsize

actualsize

• Specially designed for cleaning and autoclaving of burs• Locks open or closed for processing• Medical grade plastic, autoclavable up to 135ºC• Size: 75 mm x 35 mm x 10 mm

N050-FG, Bur Dispenser 12 FG .............. $14.85N050-MIX Bur Dispenser 6 FG + 6 RA ... $14.85

COLOURSCOLOURS Blue Light Blue Green Yellow White Light Beige Lavender

N050-MIX

N050-FG

AUTOCLAVABLE PLASTIC BUR DISPENSERS HORSELEYDIAMOND BURS FGSHORT SHANK

μm

µm

µm

µm


Diamond Burs FG


Buy 5 get 1 FREE Buy 10 get 3 FREE(same number)

Buy 5 get 1 FREE Buy 10 get 3 FREEBuy 20 get 8 FREE Buy 40 get 20 FREE

(same item)

For every 2 boxes of Horseley Diamond Burs FG purchased(any mix)get one N050 Bur Dispenser (FG or MIX) FREE

(for Bur Block details,please refer above)or

PREMIUMPLUS TM

837KR 837KR 837KR 837KR 010 012 014 016 8.0 8.0 8.0 8.0

010M 012M 014M 016M

012C 014C 016C


845KR 845KR 845KR 016 018 025 4.0 4.0 4.0

016M 018M

016C 018C 025C

846 846 846 012 014 016 6.0 6.0 6.0

012M 014M 016M

012C 014C 016C

847 847 847 847 847 010 012 014 016 018 8.0 8.0 8.0 8.0 8.0

010M 012M 014M 016M 018M

012C 014C 016C 018C

847KR 847KR 847KR 016 018 023 8.0 8.0 8.0

016M 018M

016C 018C 023C

ISO No.Size 1/10 mmLength mm

KR CYLINDER

ROUND END TAPER (CHAMFER)FLAT END TAPERROUND END TAPER (CHAMFER)EXTRA LONG

KR FLAT ENDTAPER

FLAT ENDTAPER

FLAT END TAPER KR FLAT END TAPER


801 801 801 801 801 801 801 801 801 801 801 801 801007 008 009 010 012 014 016 018 021 023 025 029 0350.7 0.8 0.9 1.0 1.2 1.4 1.6 1.8 2.1 2.3 2.5 2.9 3.5

007M 008M 009M 010M 012M 014M 016M 018M 021M 023M 025M 029M 035M

012C 014C 016C 018C 021C 023C 025C 029C 035C

018F 021F 023F 025F

018SF 021SF 023SF 025SF


ROUND

805 805 805 010 012 014 1.0 1.0 1.6

010M 012M 014M

012C 014C

INVERTED CONEINVERTED CONEWITH COLLAR OCCLUSAL

CONTOURING

FLAT END CYLINDERKR CYLINDERMODIFIED SHOULDER

KR CYLINDERROUND END TAPERMODIFIED SHOULDER


835 835 835 835 835 835 007 008 009 010 012 014 3.0 3.0 3.0 4.0 4.0 4.0

007M 008M 009M 010M 012M 014M

009C 010C 012C 014C


835KR 835KR 835KR 835KR 008 010 012 014 3.0 4.0 4.0 4.0

008M 010M 012M 014M

010C 012C 014C

836KR 836KR 836KR 836KR 008 010 012 014 6.0 6.0 6.0 6.0

008M 010M 012M 014M

012C 014C

8490094.0

009M

8490104.0

010M

8490254.0

025M

025C


822 822 822 822 008 009 010 012 2.0 2.0 2.0 3.0

008M 009M 010M 012M


830L 830L 830L 830L 830L 012 014 016 018 021 4.0 5.0 5.0 5.0 5.0

012M 014M 016M 018M 021M

012C 014C 016C 018C 021C

014SC 016SC 018SC

012F 014F 016F 018F

012SF 014SF 016SF 021SF

840 840 840 010 012 014 0.1 0.1 0.1

010M 012M 014M

PEAR LONG PEAR

839 839 839 010 012 014 0.1 0.1 0.1

010M 012M 014M

010F 012F 014F

END CUTTING FLATEND CUTTING TAPER


848 848 848 848 848 010 012 014 016 018 10.0 10.0 10.0 10.0 10.0

010M 012M 014M 016M 018M

012C 014C 016C 018C


850 850 850 850 850 010 012 014 016 018 10.0 10.0 10.0 10.0 10.0

010M 012M 014M 016M 018M

010C 012C 014C 016C 018C

014SC 016SC 018SC

010F 012F 014F 016F 018F

010SF 012SF 014SF 016SF 018SF

850L 850L 850L 850L 012 014 016 018 11.5 11.5 11.5 11.5

012M 014M 016M 018M

012C 014C 016C 018C

014SC 016SC 018SC

012F 014F 016F

BULLET

390 016 3.5

016M

016C

016F

016SF

830 830 830 009 010 012 2.7 2.7 2.7

009M 010M 012M

012C

PEAR

8330213.5

021F

021SF

8330313.5

031F

031SF

$38.50

$27.50

$38.50

$31.35

$24.75$38.50$38.50$31.35$27.50$27.50$27.50$24.75$24.75$24.75$27.50$27.50$24.75$24.75$24.75

$27.50$27.50$27.50$27.50$24.75$24.75$24.75$27.50$24.75$24.75$38.50$31.35$24.75$27.50$24.75$24.75$24.75

$19.80$19.80$24.75$24.75$24.75$24.75$24.75$24.75$19.80$19.80$19.80$19.80$19.80 $19.80$19.80$19.80

$27.50$27.50$27.50$27.50$27.50$27.50$27.50$24.75$24.75$24.75$19.80$19.80$19.80$19.80$19.80$19.80$19.80

$35.75$19.80$19.80$19.80$19.80$19.80$19.80$38.50$35.75$35.75$27.50$27.50$24.75$24.75$19.80 $19.80 $19.80 $19.80 $19.80 $19.80

8060102.0

010M

8060123.0

012M

012C

8060143.0

014M

014C

ISOBUR DIAMOND BURS FGactual size


Diamond Burs FG


(same item)

For every 2 boxes of Isobur Diamond Burs FG purchased(any mix)get one N050 Bur Dispenser (FG or MIX) FREE

(for Bur Block details,please refer to page 11)or


368 368 368 016 018 023 3.5 4.5 5.0

016M 018M 023M

016C 018C 023C

018SC 023SC

016F 018F 023F

016SF 018SF 023SF

$24.75 $27.50 $27.50

379 379 379 016 018 023 3.5 3.5 4.5

016M 018M 023M

016C 018C 023C

018SC 023SC

016F 018F 023F

016SF 018SF 023SF

$24.75 $27.50 $27.50

880 880 880 880 010 012 014 016 6.0 6.0 6.0 6.0

010M 012M 014M 016M

012C 014C 016C

010F 012F 014F

$24.75 $24.75 $24.75 $27.50

881 881 881 881 012 014 016 018 8.0 8.0 8.0 8.0

012M 014M 016M 018M

012C 014C 016C 018C

012F 014F 016F

$24.75 $24.75 $27.50 $27.50

882 882012 01410.0 10.0

012M 014M

012C 014C

012F 014F

$27.50 $27.50

ISO No.Size 1/10mmLength mm

ROUND END CYLINDERROUND END CYLINDERFOOTBALLFOOTBALL POINTED

ROUND ENDCYLINDER


862 862 862 862 862 009 010 012 014 016 8.0 8.0 8.0 8.0 8.0

009M 010M 012M 014M 016M

010C 012C 014C 016C

009F 010F 012F 014F 016F

009SF 010SF 012SF

$24.75 $24.75 $24.75 $24.75 $27.505 Diamond Bursper box

863 863 863 863 010 012 014 016 10.0 10.0 10.0 10.0

010M 012M 014M 016M

012C 014C 016C

010F 012F 014F 016F

010SF 012SF

$24.75 $24.75 $24.75 $27.50

8830103.0

010M

010F

$24.75

8880128.0

012M

012C

012F

012SF

$24.75

889 889 009 010 3.5 4.0

009M 010M

009F 010F

009SF 010SF

$24.75 $24.75

FLAMEFLAME

FLAME

FLAME FLAME


858 858 858 010 012 014 8.0 8.0 8.0

010M 012M 014M

010C 012C 014C

010F 012F 014F

010SF 012SF 014SF

$24.75 $24.75 $24.755 Diamond Bursper box

860 860 860 860 010 012 014 016 4.0 5.0 5.0 5.0

010M 012M 014M 016M

012C 014C 016C

010F 012F 014F 016F

010SF 012SF 014SF

$24.75 $24.75 $24.75 $27.50

861 861 012 014 6.0 6.0

012M 014M

012C 014C

012F 014F

012SF 014SF

$24.75 $27.50

859 859 859 859 859 010 012 014 016 018 10.0 10.0 10.0 10.0 10.0

010M 012M 014M 016M 018M

010C 012C 014C 016C 018C

010F 012F 014F 016F 018F

010SF 012SF 014SF 016SF 018SF

$24.75 $24.75 $24.75 $27.50 $27.50

NEEDLENEEDLE

FLAMEFLAME


852 852 010 012 4.0 6.0

010M 012M

010F 012F

010SF 012SF

$24.75 $24.755 Diamond Bursper box

856L 856L 856L 014 016 018 9.0 9.0 9.0 014M 016M

014C 016C 018C

016SC 018SC

$27.50 $27.50 $27.50

856 856 856 856 856 856 010 012 014 016 018 021 8.0 8.0 8.0 8.0 8.0 8.0

010M 012M 014M 016M 018M 021M

012C 014C 016C 018C 021C

014SC 016SC 018SC 021SC

012F 014F 016F

012SF 014SF 016SF

$24.75 $24.75 $24.75 $27.50 $27.50 $31.35

855 855 855 012 014 025 6.0 6.0 7.0

012M 014M 025M

012C 014C 025C

025SC

012F 014F

$24.75 $24.75 $38.50

XMAS TREEROUND END TAPER(CHAMFER)

ROUND END TAPER(CHAMFER)

ROUND END TAPER LONG(CHAMFER)

909 909037 0401.0 1.0

037M 040M

037C 040C

037SC 040SC

$38.50 $38.50

WHEEL

ISOBUR DIAMOND BURS FG

actualsize


Diamond Burs FG


(same item)

For every 2 boxes of Isobur Diamond Burs FG purchased(any mix)get one N050 Bur Dispenser (FG or MIX) FREE


actual size

HP Order No.Length mm

each

0120.02314.0

$29.15

0220.02316.0

$29.15

0320.02316.0

$29.15

0420.02316.0

$29.15

0720.0238.0

$29.15

0820.0238.0

$29.15

1720.0238.0

$29.15

5120.06012.2

$44.55

5220.06012.2

$44.55


each

5320.060 5420.06012.2

$44.55 $44.55

13.9

5520.06015.9

$44.55 $44.55 $44.55 $44.55 $44.55 $44.55 $44.55 $44.55 $44.55

5620.04512.9

5720.04014.1

5820.06012.5

6120.0408.9

6320.0609.4

6420.03111.5

7020.06011.0

7220.06014.2


each

0130.02314.0

$38.50

0230.02316.0

$38.50

0430.02316.0

$38.50

0730.0238.0

$38.50

0830.0238.0

$38.50

1030.0237.0

$38.50

1130.0235.3

$38.50

5630.04512.9

$49.50

5730.04014.1

$49.50

5730.04514.1

$49.50

7230.04011.5

$49.50


each

0140.02314.0

$38.50

0240.02316.0

$38.50

0740.0238.0

$38.50

0840.0238.0

$38.50

5740.04514.1

$49.50


each

0124.02314.0

$29.15

2024.02310.5

$29.15

2124.0239.0

$29.15

5424.06013.9

$49.50

6924.04013.7

$49.50

7224.04011.5

$49.50

EDENTA CARBIDE BURS HP

FINECROSS-CUT

• For acrylics andprecious metals

FINECROSS-CUT

• For acrylics andprecious metals

SUPER FINECROSS-CUT

• For precious andnon-precious

metals,composite and

ceramics

DIAMOND CUTwith PRISMA

SURFACE

• For increasedsurface retention onthe metal framework(by more than 100%)

for ceramic andacrylic crown and

bridge work.

SPIRAL FINE CUT

• For preciousmetals, excellent

cuttingperformance ontitanium and NP

alloys

Size 1/10mm 023 023 023 060 040 040

Size 1/10mm 023 023 023 023 045

Size 1/10mm 023 023 023 023 023 023 023 045 040 045 040

Size 1/10mm

060 060

060 045 040 060 040 060 031 060 060

Size 1/10mm 023 023 023 023 023 023 023 060 060


Sundries

Buy 3 Edenta Carbide Burs HP (any mix)get one S-II Aluminium Bur Block FREE

(for Bur Dispenser details,please refer to page 16)or


(same number)

N250SSnap-On

SoftGreen

N250RSnap-OnRegular

Blue

N251RScrew

RegularBlue

N251SScrewSoft

Green

N252RRA

RegularBlue

N252SRASoft

Green

250SSnap-On

SoftGrey

250RSnap-OnRegularWhite

251RScrew

RegularWhite

251SScrewSoftGrey

252RRA

RegularWhite

252SRASoftGrey

actual size

PROPHY CUPS LATEX FREE

PREMIUMPLUS TM

REGULARWhite or Light Blue, 144 pcs/box250R Snap-On ................. $15.95251R Screw ..................... $24.75252R RA ........................... $33.00

SOFTGrey or Light Green, 144 pcs/box250S Snap-On .................... $15.95251S Screw ........................ $24.75 252S RA .............................. $33.00

• Ribbed and webbed• Available in REGULAR (white, light blue) or SOFT(grey, light green)

4037Snap-OnMandreleach

$11.55

PREMIUMPLUS TM

Prophy Brushes, 144 pcs/box

260T Snap-On Tapered ...261T Screw Tapered ........262T RA Tapered ..............

$49.50$55.55$59.95

265 RA Micro ..................$49.50

260F Snap-On Flat ...........261F Screw Flat ................262F RA Flat ......................

$49.50$55.55

$44.55

M268B Junior Cup Bristle ... $59.95M268N Junior Cup Nylon .... $49.50P268B Junior Cup Bristle .... $44.55P268N Junior Cup Nylon ..... $38.50


(same number)

Buy 5 get 1 FREEBuy 10 get 3 FREEBuy 20 get 8 FREE


261FScrew

Flat

261TScrew

Tapered 262FFlat

262TTapered

260TSnap-OnTapered

260FSnap-On

Flat

265Micro

PROPHY BRUSHESLATEX FREE

M268BBristle

M268NNylon

P268BBristle

P268NNylon

actual size

Length mm

each

14.0 17.0 8.0 8.0 7.0 5.3 8.0 4.2 8.0 3.9 3.5 2.0

Length m m

each

12.2 12.2 13.9 15.0 12.9 12.5 8.9 9.4 11.5 11.5 14.2

Length m m

each

12.2 12.2 13.9 15.0 12.9 12.5 13.9 9.4 11.5 11.5 14.2

Length m m

each

12.2 12.2 12.2 13.9 15.0 12.9 13.9 12.5

Length m m

each

12.2 12.2 12.2 13.9 15.0 12.9 13.9 12.5

Length m m

each

14.0 12.2 14.1 14.2 9.0

EDENTA CARBIDE BURS HP

For acrylicsand metals

For acrylicsand metals

For acrylicsand

preciousmetals

For bulkabrasion on

acrylics orplasters

For bulkreduction on

acrylics orplastics

For bulkabrasion on

acrylics orplasters

For bulkreduction on

acrylics orplastics

For softrelining

materials,mouth

guards orany softacrylics

actual size

BRASS BURBRUSH

actualsize

HP10pcs

FG/HPeach

FG/HPeach

Spiral10pcs

Sandpaper10pcs

Sandpaper10pcs

Size 1/10 mm 023 023 023 023 023 023 016 010 023 023 012 023

Size 1/10 mm 060 060 060 060 045 060 040 060 031 040 060

Size 1/10 mm 060 060 060 060 045 060 060 060 031 040 060

Size 1/10 mm 060 060 060 060 060 045 060 060

Size 1/10 mm 060 060 060 060 060 045 060 060

Size 1/10 mm 023 060 045 060 040

•

•

•

••

•

•

•

Grey Brown White

•

HP Order No. 0110.023 0610.023 0710.023 0810.023 1010.023 1110.023 1210.016 1310.010 1710.023 1810.023 3510.012 7110.023

5210.060 5310.060 5410.060 5510.060 5610.045 5810.060 6110.040 6310.060 6410.031 7210.040 7210.060

5270.060 5370.060 5470.060 5570.060 5670.045 5870.060 5970.060 6370.060 6470.031 7270.040 7270.060

5180.060 5280.060 5380.060 5480.060 5580.060 5680.045 5485.060 5885.060

5150.060 5250.060 5350.060 5450.060 5550.060 5650.045 5455.060 5855.060

0175.023 5275.060 5775.045 7275.060 7775.040

HP Order No.

HP Order No.

HP Order No.

HP Order No.

HP Order No.

STANDARDCROSS-CUT

STANDARDCROSS-CUT

STANDARDPLAIN-CUT

COARSEPLAIN-CUT

SUPERCOARSE

PLAIN-CUT

COARSECROSS-CUT SUPERCOARSE

CROSS-CUT

COARSESTRAIGHT

BLADECROSS-CUT

Coarse Medium Fine

4007 4025 4022 4004 4013 4015

$24.75 $24.75 $24.75 $24.75 $24.75 $24.75 $24.75 $18.15 $24.75 $24.75 $24.75 $24.75

$39.60 $39.60 $39.60 $39.60 $39.60 $39.60 $39.60 $39.60 $39.60 $39.60 $39.60

$38.50 $38.50 $38.50 $38.50 $38.50 $38.50 $38.50 $38.50 $38.50 $38.50 $38.50

$39.60 $39.60 $39.60 $39.60 $39.60 $39.60 $44.55 $44.55

$44.55 $44.55 $44.55 $44.55 $44.55 $44.55 $49.50 $49.50

$38.50 $49.50 $49.50 $49.50 $44.55

Single Grit ............Assorted Grits......

Big Points HP, 6 pcs/box$38.50$38.50

$27.50 $11.55 $16.50 $27.50 $24.75 $19.80

actual sizeEDENTA MANDRELSAND BUR ADAPTORS HP

Telescopic handlewith brass wirebristles

1110Brass Bur Brush

$19.80

SHOFU BIG POINTS HPfor acrylic polishing


Sundries

Buy 5 get1 FREE

(same item)

Buy 5 get1 FREE


(same number)

Buy 3 Edenta Carbide Burs HP(any mix)get one S-II Aluminium Bur Block HP FREE



orBuy 5 get 1 FREEBuy 10 get 3 FREEBuy 20 get 8 FREEBuy 40 get 20 FREE

(same number)

Buy 3 boxes of EXA Acrylic points HP(any mix)get one 037 Aluminium Bur Block HP FREE

(for Bur Block details,please refer right)

STANDARDCOLOURS

Blue

Light Blue

Green

Yellow

White

Light Beige

Lavender

Length mmSize 1/10 mmHPHP OrdOrdeerr NoNo

18.015000676711

18.015000676722

21.007000676733

15.505500676799

20.007000677677

24.510000676744

18.011000676755

20.011000676676


18.015000666611

18.015000666622

21.007000666633

15.505500666699

20.007000666677

24.510000666644

18.011000666655

20.011000666666


18.015000665511

18.015000665522

21.007000665533

15.505500665599

20.007000665577

24.510000665544

18.011000665555

20.011000665566

actual sizeCoarse Grit

Medium Grit

Fine Grit

EXA ACRYLIC POLISHING POINTS HP BUR BLOCK HP S-II

• Specially designed for ultrasonic cleaningand autoclaving of burs

• Sturdy construction, fully autoclavable• Available colours: Silver or Blue

Advanced surface treatmen tsystem for rapid trimming(blue),smoothing (lightblue) and high-glosspolish(yellow)of prosthetic acrylics. Abrasive trimming due touniqueabrasive bodies. New type of long-chain silicones withspecific abrasive bodies which ensure controlled & rapidreduction combined with a smooth prepolish.

EDENTA BLUE ACRYLIC POLISHING HP KIT

0630Blue AcrylicPolishing Kit

$49.50

037 S-II Aluminium Bur Block 6 HP HolesW 54mm x D 28mm x H 62mm...... $27.50

Edenta EXA Acrylic Polishing Points HP6 pcs/box (same shape/grit) … $38.50

ALUMINIUM BUR BLOCKS• Ideal for storage of dental burs• Special design for ultrasonic cleaning and autoclaving of burs• Sturdy construction, fully autoclavable up to 135C°

038-FG

040-RA

037-HP2880-FG

039-MIX

2880-MIX

2832-FG

2832-MIX

N050-MIX

AUTOCLAVABLE PLASTIC BUR DISPENSER

N050-FG

PREMIUM K-IIPLASTIC BUR BLOCKS

• Locks open or closed for processing• Medical grade plastic, autoclavable up to 135°C• Size: W 55mm x D 12mm x H 34mm• Available colours: Aqua, Light Beige, Dark Blue, Light Blue and Yellow

Small Bur Block (Colours: Silver, Blue, Red, Yellow or Green)038-FG 15 FG W58 mm x D25 mm x H31 mm ..................... $24.75039-MIX 10 FG + 5 RA W58 mm x D25 mm x H31 mm ........ $24.75040-RA 12 RA W58 mm x D25 mm x H31 mm .................... $24.75037-HP 6 HP W54 mm x D28 mm x H62 mm ....................... $27.50

Large Bur Block (Colours: Silver or Blue)2832-FG 32 FG W80 mm x D42 mm x H33 mm ................. $68.752832-MIX 16 FG + 16 RA W80 mm x D42 mm x H33 mm ... $77.552880-FG 80 FG W100 mm x D75 mm x H33 mm ............... $88.552880-MIX 40 FG + 40 RA W100 mm x D75 mm x H33 mm . $99.55

• Specially designed for cleaning and autoclaving of burs• Locks open or closed for processing• Medical grade plastic, autoclavable up to 135ºC• Size: 75 mm x 35 mm x 10 mm

N050-FG, Bur Dispenser 12 FG .............. $14.85N050-MIX Bur Dispenser 6 FG + 6 RA ... $14.85

380-FG Plastic Bur Block K-I I 12 FG Holes .... $27.50381-CA Plastic Bur Block K-I I 12 CA Holes ... $27.50


Sundries

ALUMINIUM

PREMIUMPLUS TM

PREMIUMPLUS TM

PREMIUMPLUS TM




Buy 5 get1 FREE


(same item)

5114 Diamond Disc RAeach … $49.50Caution: Use spray

coolant when preparingMax. 20,000 rpm

To remove an all-porcelain restoration cut therestoration along the length of the axial wall tothe centre of the occlusal surface or incisal edgeusing a sinter diamond disc Order no. 5114RA.Then bend the restoration open with a suitableinstrument to make it fracture

EDENTA 5114RA SINTER DIAMOND DISC RA Removing all-porcelain restorations

actu

al s

ize

EDENTA SOFT TISSUE TRIMMER FGTissue Trimmer STT/FG-Shank:Designed for soft-tissue surgery, the STT ceramic tissue trimmer is a rotaryinstrument that can be used as an alternative to electrosurgery and surgicalblades. The biocompatible hard oxide point is said to cut tissue without burning. .Applications include modelling gingiva, opening the sulcus for impression,freeing deep cavities, lacerating inter-radicular granulation-tissue, removinggingival hyperplasia/papillectomies, and exposing intra-osseous implantsections and retinated teeth.

Speed:Air turbine 300.000 - 500.00 rpmTo be used without any water/spray cooling

Order No. STT249

01612.0

FG016

ISO Size 1/10mmLength (mm)

Soft Tissue Trimmer FGeach … $99.00

actualsize

Recovering implants Excising Mucosa

Gingivectomy Interradicular debridement

Standard Order No.Short Shank Order No.


Each

401M

0103

$4.40

401

0114

$4.40

30113010164.5

$4.40

301M

0134

$4.40

201S

0147

$5.50

2011201016

7$5.50

101S

01410

$5.50

101SR

01410

$5.50

101110101610

$5.50

101L1101L01810

$5.50

202

0215

$6.60

202S

0175

$6.60

103

0229

$7.70

301CR

0184

$6.60

202CR

0215

$6.60

201CR

0187

$6.60

101CR

01910

$7.70

103CR

02310

$8.25

206CR

0273.5

$8.25

207CR

0313.5

$8.25

201SR

0147

$5.50

201R1201R

0167

$5.50

104R1104R

01610

$5.50

101R1101R

01610

$5.50

102R

0179

$5.50

103R

0229

$7.70

105R

02211.5

$8.25

106RD

0219

$8.25

107RD

0239

$8.25



Each

304

0166

$4.40

20412040138

$5.50

104110401610

$5.50

104L

01810

$6.60

4111411011

4$4.40

411M

0103

$4.40

31113110134.5

$4.40

211

0147

$5.50

214

0125

$5.50

311RM

0134.5

$5.50

212R

0106

$5.50

213R

0128

$5.50

114S

0108

$5.50

114

0128

$5.50

316

0134

$4.40

215S

0127.5

$5.50

215

0147.5

$5.50

216

0177.5

$5.50

115

01310

$5.50

116

01510

$5.50

421M

0101

$4.40

42114210151.5

$4.40

321M

0161.4

$4.40

321

0181.7

$4.40



Each

421SS1421SS

0102.2

$4.40

421S1421S

0143.5

$4.40

321S1321S

0163.5

$4.40

150

0355.7

$8.25

440SS

0100.9

$4.40

440S

0131.2

$4.40

44014400151.3

$4.40

34013400181.6

$4.40

461R

0092

$4.40

462R

0111.7

$4.40

319

0193.4

$5.50

364R

0154.5

$4.40

265R

0215

$5.50

144

0325

$7.70

165R

0257

$7.70

330

0250.5

$4.40

230

0430.6

$5.50

130

0500.7

$5.50

111

0451.7

$7.70

117

0325

$7.70

145

0294.9

$7.70

148

0325

$7.70

149

0394

$7.70

121

0263.6

$8.25

122

0364

$8.25

246

0334

$8.25

SHOFU DIAMOND BURS FG

Medium(115 Microns)

Medium(115 Microns)

Medium(115 Microns)

actual size

depth of cutting0.5mm 1.0mm



Each

SF201

0157

$5.50

SF101SF1101

01510

$5.50

SF301CR

0184

$6.60

SF202CR

0215

$6.60

SF201CR

0187

$6.60

SF101CR

01910

$8.25

SF103CR

02310

$8.25

SF206CR

0273.5

$8.25

SF207CR

0313.5

$8.25

SF104R

01510

$5.50

SF102R

0169

$5.50

SF102RD

0189

$8.25

SF106RD

0219

$8.25

SF107RD

0239

$8.25

SF204

0108

$5.50

SF215

0127.5

$5.50

SF114

0138

$6.60

SF318

0232

$5.50

SF319

0143.4

$5.50

SF416

0164

$5.50

SF217

0176

$6.60

SF219

0195

$6.60

SF150

0355.7

$8.25

SF440

0151.3

$5.50

SF265R

0205

$5.50

SF313R

0163.3

$5.50

SF145

0294.9

$8.25

F201R

0157

$5.50

F104R

01510

$5.50

F102R

0169

$5.50

F105R

02111.5

$6.60

F204

0128

$5.50

F104

01510

$5.50

F215F12150137.5

$5.50

F216

0167.5

$5.50

F440R

0070.7

$5.50

680F

0109

$5.50

682F

0129

$5.50

684F

0149

$5.50



Each

C101

01710

$6.60

C202

0225

$5.50

C102R

0189

$6.60

C104LL

02210

$7.70

C165R

0257

$7.70

C101X

01710

$7.70

C103X

02310

$7.70

C105RX

02312

$7.70

C111

0461.8

$7.70

680C

0109

$5.50

682C682S012

9$5.50

684C684S014

9$5.50

Fine(60 Microns)

Red

Superfine(25 Microns)

Yellow

Coarse(135 Microns)

Green

TISS

UE P

ROTE

CTIV

E

END

CUTT

ING

TISS

UE P

ROTE

CTIV

E

END

CUTT

ING

Buy 10 get 3 FREEBuy 5 get 1 FREEBuy 20 get 8 FREE Buy 40 get 20 FREE

(same number)

orFor every 5 pieces of Shofu Diamond Burs FG purchased(any mix)

get one N050 Bur Dispenser (FG or MIX) FREE(for Bur Block details,please refer to page 11)


Sundries

Buy 5 get 1 FREE

Buy 5 get 1 FREE


The Enamel Adjustment Kit has threeDura-White stones for adjusting naturaldentition and porcelain and nineCeramisté points for intra-oral polishing.

The Porcelain Adjustment Kit has threeDura-White stones for adjusting and

nine Ceramisté points for polishingat chairside.

SHOFU PORCELAIN VENEER KIT SHOFU PORCELAIN LAMINATE POLISHING KITS

0317 RA Kit ... $55.550318 FG Kit .... $55.55

SHOFU NP ALLOYADJUSTMENT KIT

0311 HP Kit$39.60

This kit is designedfor finishinginterproximal andsubgingivalcomposite fillings. Ithas six Dura-Greenand six Dura-Whitestones in CN1 andFL2 shapes.

• Design for adjustmentand polishing of acrylicdentures and applianceschairside or in thelaboratory.

• The kit includes 8Silicone Acrypoints and 4Robot Carbide Burs forfast, smooth adjustmentand polishing

SHOFU GIC POLISHING KIT

SHOFU COMPOSITEFINISHING KITS

SHOFU ACRYLIC CONTOURINGAND FINISHING KIT HP

• No metal centre, will not gouge or discolour composite• Improved mandrel design• For safe, fast polishing without changing or inverting discs

These abrasives areimpregnated withpolishing ingredientsto provide fast, brilliantresults without pumice ortin oxide. The kit includesthree each Brownie cups and mini-points, two each Greenie cups andmini-points, one each Supergreenie cup and mini-point.Cups are for proximals, Mini points for occlusals.

0310Composite Polishing RA Kit

$39.60

SHOFU COMPOSITEPOLISHING KIT

0323 GIC Kit$49.50

0329 Acrylic Kit$115.50

SHOFU 0505SUPER-SNAPMINI KIT

SHOFU GOLDPOLISHING KITS

SHOFU ENAMEL AND PORCELAINADJUSTMENT KITS

0307 Enamel RA Kit ...$39.600301 Porcelain HP Kit $39.60

SHOFU AMALGAMPOLISHING KITS

For finishing andsuperpolishing castgold/precious alloys,this kit includes sixBrownie, threeGreenie and threeSupergreeniepolishing points inKN7, PC2 and WH6shapes.

SHOFU HYBRID DIAMOND BURS FG (in Carbide Bur Shapes)REGULAR (115 microns)

Order No.Carbide Shape

09012

09034

09056

090734

090935

0911245

0913331

0915556/56

0917557/57

0919558/58

0921700/170

0923701/171

Order No.Carbide Shape

09257006

09277104

09297106

09317404

09337406

09357803

09377901

09397903

0941LT1

0943LT2

actualsize

actual size

Hybrid Regular Diamond Bur FG … $4.40

Hybrid T&FDiamond Bur FG

each $5.95

SHOFU HYBRID T&F DIAMOND BURS FG (in Carbide Bur Shapes)SUPERFINE (25 microns)

0505 Super Snap Mini Kit .... $39.60

This kit is designed for finishing and polishing alltypes of composite materials. It has two Dura-Greenand two Dura-White stones, six CompoSite points,and one each Composite Fine cup and disk.

0303 HP Kit ... $39.600304 RA Kit ... $39.60

Specially selected assortment of T&F HybridPoints, Dura white stones, Composite andCeramiste polishers for finishing and polishingof Glass Ionomer and Composite restorations

Designed for chairside adjustment of nickel-chrome or chrome-cobalt prosthesis and forpolishing adjusted surfaces, this kit has ten LabSeries White stones for adjusting and two Hardiemounted points for finishing and polishing.

Designed by Dr. George A. Freedman, this kitcontains an optimal selection of instruments to assist thepractitioner in all aspects of porcelain veneer placement:one regular-grit and two fine grit FG Robot diamond points,three T & F-grit Hybrid points, two CA Dura-White stones,six CA Ceramiste points, and two CA Ceramisté cups.

0300 Kit … $88.55

Designed by Dr. Ronald E. Goldstein,this kit has fourteen assortedCeramisté cup and Midi-point shapesfor complete polishing.

For every 5 pieces ofShofu Diamond Burs FG purchased (any mix)

get one N050 Bur Dispenser (FG or MIX) FREE(for Bur Block details, please refer to page 11)

o rBuy 5 get 1 FREE Buy 10 get 3 FREE Buy 20 get 8 FREE Buy 40 get 20 FREE

(same number)

0308 Amalgam Polishing RA Kit...$39.600309 Amalgam Polishing FG Kit...$39.60

0306 RA Kit ...$39.600302 FG Kit ...$39.60

Sundries



Buy 5 get 1 FREE

Buy 5 get 1 FREEBuy 5 get 1 FREE(same item)

Buy 5 get 1 FREE(same item)

Buy 5 get 1 FREE (same item)

Buy 5 get 1 FREE(same item)

Buy 5 get1 FREE

(same item)


• For finishing enamel and composite restorations aswell as stain and adhesive removal

• No metal centre, to prevent discolouring of therestoration

• Operating speed 3,000 - 10,000 r.p.m.• A vailable in 25 pieces with OneGloss mandrel supplied

SHOFU ONEGLOSS ONE-STEP COMPOSITE FINISHERS AND POLISHERS

• It’s proven to be more durable• It finishes and polishes better in just one-step• It’s intended for single use (but is durable enough to last

through an entire treatment)• It costs 50% less than comparable brands • It allows you to switch from finishing to polishing by

simply altering contact pressure

Just compare OneGloss to the competition:

• 25 micron trimming &finishing diamond bursFG for composites,enamel and porcelain

The OneGloss system works on all composites just by altering contact pressure

0955 All Ceramic Preparation Set FG$137.50

The demand for ceramics in dentistry is at an all time high. Newer ceramicmaterials available today produce superb ceramic restorations. This ischallenging the dental professional to consider newer materials, aesthetics,function, and clinical expertise when preparing an all ceramic restoration.Under the guidance of Dr.Takao Maruyama of Osaka University,Dr. YoshihikoMutobe and Shofu have developed a new all ceramic preparation systemutilizing ceramic diamond burs to prepare an all ceramic restoration.

IMPROVED SUPER-SNAP SYSTEM

• Thin, double-sided Discs(only for fine & super fine grits)For safe, fast polishing withoutchanging or inverting discs

• Improved Mandrel Design Holds discs firmly for maximum control

• No Metal CentreWill not gouge or discolour composite

• New Black Coarse DiscUniform (coarse grit) particles forfast, smooth composite contouring.

• Thin PolystripsInterproximal finishing and polishingstrips. Colour coded:Black/Violet (Coarse/Medium grits)Green/Red (Fine/Superfine grits)

• New Kit DesignSemi-circular design for convenientaccess and easy identification ofdifferent grits of discs & strips.

• More DisksNew kit contains 180 Disks (3 timesmore than the previous kit)

BLACK Coarse Grit(for contouring)

L-525 Black/ (Coarse/Medium) L-526 GreenGreenGreen/Red (Fine/Superfine)

VIOLET Medium Grit(for finishing)

GREENGREENGREEN Fine Grit(for polishing)

RED Superfine Grit(for super polishing)

L-506Black

L-508Violet

L-528D. Violet

L-502Red

L-501Green

L-507Black

L-509Violet

Violet

L-522Violet

L-519Green

L-521Red

KITS0500 Super-Snap Complete Kit .................. $115.500505 Super-Snap Mini Kit .............................. $39.60Polystrip Coarse and Medium 100 pcs/box .$24.75Polystrip Fine and Superfine 100 pcs/box .. $24.75

REFILLSSuper-Snap Refills, 50 pcs/box ............ $24.75Super-Snap Mandrel, 6 pcs/box ........... $29.15Dura-White Stone, 12 pcs/box ............. $34.65Composite Silicone Point, 12 pcs/box . $38.50

PN 0500 SUPER-SNAP COMPLETE KITContents: 180 Super-Snap Disks

2 CA Mandrels40 Polystrips2 Dura-White Stone CA1 Composite Fine Point CA

actualsize

The new improved Super-Snap system has made an evolution to perfection.The number of polishing steps has been reduced and the range of grits has been expanded. For optimal safety in polishing, thediscs, and the shanks are protected for maximum safety when working interproximally. The final polishing discs are double-sided, giving you maximum convenience and performance. The redesigned mandrel holds the discsfirmly to ensure a safe grip. Finishing and polishing of composite has never easier and now Super Snap Ultra-thin, colour-codeddiscs indicate the grit and function to take you step-by-step to the finest restorations you can achieve. In addition, colour-codedpolystrips have been added to complete the evolution of the new Super Snap Technique Kit.

• Finishes & Polishes composite restorations• Removes excess resin cement on tooth surface without marring enamel• Removes orthodontic cement after debanding & bracket removal• Removes stains from teeth• Polishes enamel after scaling

Multi-Uses

• Reduces sterilization cycles• Reduces clean-up between patients

Disposable

• Finishes & Polishes in one step• Reduces patient chair time• Eliminates additional polishing steps

One Stop /One Step

THE ONEGLOSS FEATURES AND BENEFITS

BenefitsFeatures

SHOFU 0950HYBRID

T & F KIT FG

SHOFU CROWN & BRIDGEPREPARATION KIT

• Designed by experts in the field of restorative dentistry toprovide efficiency and accuracy during crown and bridgepreparation

• Speedy, simple and accurate tooth preparation can be donewith 14 kinds of specially selected FG Diamond Points

• Usable for a wide range of crown and bridge preparationwork such as, PFM of full metal crowns and bridges, fullceramic restorations, Veneers, Inlays and Onlays

• The Diamond Points are hygienically organized in anautoclavable aluminum bur block for convenient sterilizationand replacement

each … $137.50

0180 OneGloss Complete Set ................................. $99.55(20 Cups, 20 Midi points, 20 Inverted Cone & 3 Mandrels)0181 OneGloss Cup Refill 50 pcs/box .................... $59.950182 OneGloss Midi Refill 50 pcs/box .................... $59.950183 OneGloss Inverted Cone Refill 50 pcs/box .. $59.95OneGloss Mandrel CA 6 pcs/box ........................... $29.15

0950 Hybrid T & F Kit FG … $59.95

Silicone Point MidiUnmounted25 pcs/box

$38.50

SHOFU ALL CERAMICPREPARATION SET FG

SHOFU SILICONEMIDI-POINTS UNMOUNTED

Sundries

Buy 5 get 1 FREE

Buy 5 get 1 FREE



Buy 40 get 20 FREE


(same number)


(same item)


FG SHAPES RA SHAPES

Madeof high quality silicone carbide grits, Dura-Green Stonesare exceptional for fast contouring and finishing porcelain,composites,gold, silver and amalgam. These concentric, fastcutting stones come in CA and FG shank sizes.

RA ShapeOrder No

Order No

Order No

Order No

CN10052

FG Shape CN10101

CY20103

#24FG24

FL20104

FG Shape RD10107

RD20108

TC10109

RA Shape RD20083

RD30084

RD40085

RE10086

TC10089

WH30095

WH40096

CY10055

FL10059

FL20060

FL30061

IC30066

RD10082

Dura Green Stones,12 pcs/box RA or FG

$34.65

SHOFUDURA-WHITE®STONES RAAND FG

For fine finishing enamel,composites and porcelain,nothingexceeds the performance of the Dura-White Stones.Made of micrograined aluminium oxide grit,seach stone isperfectly balanced to provide vibration-free performance.

Dura White Stones, 12 pcs/box RA or FG ... $34.65

ShapeRA Order NoHP Order No

CN102210201

FL10222N/A

FL202230203

FL302240204

IC40225N/A

RD102270207

RD202280208

RE102290209

TC102300210

TC4N/A0211

ShapeFG Order No

CN10241

FL10240

FL20244

RD10247

RD20248

TC10249

FG SHAPES RA/HP SHAPES

SHOFU ACRYPOINT HP for acrylic polishingQuality Features :Silicone polishers for finishing of denturse materialsDentist : Polishing after contouring adjustments on acrylic denturesTechnician: Polishing acrylic dentures in critical areas (i.e. palatal arch)and at acrylic to metal junction

actualsize

actualsize

actualsize

actualsize

Indication : For polishing of anterior and posterior composite restorations without scratching surrounding tooth structure. Final polishing can be obtained easily without ditching the restorative material

Specification :Specification :Available in two grits and 8 different shapes as follow:CompoSite Polisher–Aluminium oxide (approx. 40 microns)CompoSite Fine Polisher – Zirconium (approx. 20 microns shank marked with colour band)

SHOFU COMPOSITEPOLISHERS

actualsize

Composite SiliconePoints RA/FG

12 pcs/box ... $38.50

Bullet

0191RA

0291RA

Knife

0192RA

0292RA

Wheel

0193RA

0293RA

Disk

0194RA

0294RA

Cup

0195RA

0295RA

Pear

0196RA

196BFG

0296RA

296BFG

Inverted Cone

0197RA

0297RA

Midi

0198RA

0199FG

0298RA

0299FG

ShapeCompoSite Polisher RAAluminium oxide (40µm)CompoSite Polisher FG

RA

FG

Aluminium oxide (40µm)CompoSite Fine Polisher

Zi rconium (20µm)CompoSite Fine Polisher

Zi rconium (20µm)

SHOFU POLY STRIPSSize: 178 mm x 3.5 mmAvailable in: L-525 - Coarse and Medium (Black/Violet)

L-526 - Fine and Superfine(Green/Red)

L-525 Coarse and Medium, 100 pcs/box ..$24.75L-526 Fine and Superfine, 100 pcs/box ....$24.75

Coarse (Dark Grey)Medium (Brown)Fine (Light Grey)

042604270428

042304240425

0322 CompositeTechnique Kit CA

12 pcs/box ... $59.95

Acrypoint HP BPI 6 pcs/box ......$38.50Acrypoint HP PC2 12 pcs/box ...$38.50

L-525Coarse/Medium

L-526Fine/Superfine

SHOFU DURA-GREEN ® STONES RA AND FG

Abrasives and Polishers


Buy 40 get 20 FREE



Buy 5 get 1 FREE Buy 10 get 3 FREE Buy 20 get 8 FREE Buy 40 get 20 FREE(same item)


(same number)

SHOFU BROWNIE®/GREENIE®/SUPE R-GREENIESILICONE POINTS RA, FG and HP

For Amalgam and Cast Alloy.Eliminate the bother of messy pumice and tix oxide.Usethese popular silicone cups,points,disks and wheels that are impregnated with highquality polishing ingredients for fast,and brilliant finishes on amalgam,gold and castalloys.Use our Brownies to achieve a smooth surface,Greenies for lustrous polish andSupergreenies(with yellow banded shank)for superpolish.

Gold andPrecious AlloyPolishing

ShapeBrownies HP Order No.

(Initial Polishing) RA Order No.

Greenies HP Order No.(Lustrous Polishing) RA Order No.

Supergreenies HP Order No.(Super Polishing) RA Order No.

MiniBHP280403

GHP28040

stoddard maxflex pop on polishing discs...order no. dp051 10.0 5.2 dp052 8.3 6.0 dp053 2.5 10.0...

Documents